The old comment, on top of the function rte_eal_has_hugepages(),
is really outdated and not generic enough.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
In ppc64le, expanding DMA areas always fail because we cannot remove
a DMA window. As a result, we cannot allocate more than one memseg in
ppc64le. This is because vfio_spapr_dma_mem_map() doesn't unmap all
the mapped DMA before removing the window. This patch fixes this
incorrect behavior.
I also fixed the order of ioctl for unregister and unmap. The ioctl
for unregister sometimes report device busy errors due to the
existence of mapped area.
Signed-off-by: Takeshi Yoshimura <tyos@jp.ibm.com>
Acked-by: David Christensen <drc@linux.vnet.ibm.com>
va2pa depends on the physical address and virtual address offset of
current mbuf. It may get the wrong physical address of next mbuf which
allocated in another hugepage segment.
In rte_mempool_populate_default(), trying to allocate whole block of
contiguous memory could be failed. Then, it would reserve memory in
several memzones that have different physical address and virtual address
offsets. The rte_mempool_populate_default() is used by
rte_pktmbuf_pool_create().
Fixes: 8451269e6d7b ("kni: remove continuous memory restriction")
Cc: stable@dpdk.org
Signed-off-by: Yangchao Zhou <zhouyates@gmail.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The config create function did not store the mem config address in
the shared memconfig structure, so the secondary processes couldn't
map it at the required address.
Fixes: b149a7064261 ("eal/freebsd: add config reattach in secondary process")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The commit db90b4969e2e ("vfio: retry creating sPAPR DMA window")
introduced a build breakage on old Linux. Linux <4.2 does not define ddw in
struct vfio_iommu_spapr_tce_info. Without ddw, we cannot change window size
and so should give up the creation. I just exculuded the retrying code if
ddw is not supported.
Fixes: db90b4969e2e ("vfio: retry creating sPAPR DMA window")
Signed-off-by: Takeshi Yoshimura <tyos@jp.ibm.com>
Tested-by: Anatoly Burakov <anatoly.burakov@intel.com>
Currently, when fbarray is destroyed, the fbarray structure is not
zeroed out, which leads to stale data being there and confusing
secondary process init in legacy mem mode. Fix it by always
memsetting the fbarray to zero when destroying it.
Fixes: 5b61c62cfd76 ("fbarray: add internal tailq for mapped areas")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Populating the eventfd in rte_intr_enable in each request to vfio
triggers a reconfiguration of the interrupt handler on the kernel side.
The problem is that rte_intr_enable is often used to re-enable masked
interrupts from drivers interrupt handlers.
This reconfiguration leaves a window during which a device could send
an interrupt and then the kernel logs this (unsolicited from the kernel
point of view) interrupt:
[158764.159833] do_IRQ: 9.34 No irq handler for vector
VFIO api makes it possible to set the fd at setup time.
Make use of this and then we only need to ask for masking/unmasking
legacy interrupts and we have nothing to do for MSI/MSIX.
"rxtx" interrupts are left untouched but are most likely subject to the
same issue.
Reported-at: https://bugzilla.redhat.com/show_bug.cgi?id=1654824
Fixes: 5c782b3928b8 ("vfio: interrupts")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Shahed Shaikh <shshaikh@marvell.com>
The functions rte_service_may_be_active(), rte_service_lcore_attr_get(),
and rte_service_attr_reset_all() were introduced nearly a year ago in DPDK
18.08. They can be considered non-experimental for the 19.08 release.
rte_service_may_be_active() is used by the sw PMD, and this commit allows
it to not need any experimental API.
Signed-off-by: Gage Eads <gage.eads@intel.com>
If there are multiple threads contending, they all attempt to take the
spinlock lock at the same time once it is released. This results in a
huge amount of processor bus traffic, which is a huge performance
killer. Thus, if we somehow order the lock-takers so that they know who
is next in line for the resource we can vastly reduce the amount of bus
traffic.
This patch added MCS lock library. It provides scalability by spinning
on a CPU/thread local variable which avoids expensive cache bouncings.
It provides fairness by maintaining a list of acquirers and passing the
lock to each CPU/thread in the order they acquired the lock.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
sPAPR allows only page_shift from VFIO_IOMMU_SPAPR_TCE_GET_INFO ioctl.
However, Linux 4.17 or before returns incorrect page_shift for Power9.
I added the code for retrying creation of sPAPR DMA window.
Signed-off-by: Takeshi Yoshimura <tyos@jp.ibm.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Currently, whenever timer library is initialized, the memory
is leaked because there is no telling when primary or secondary
processes get to use the state, and there is no way to
initialize/deinitialize timer library state without race
conditions [1] because the data itself must live in shared memory.
Add a spinlock to the shared mem config to have a way to
exclusively initialize/deinitialize the timer library without
any races, and implement the synchronization mechanism based
on this lock in the timer library.
Also, update the API doc. Note that the behavior of the API
itself did not change - the requirement to call init in every
process was simply not documented explicitly.
[1] See the following email thread:
https://mails.dpdk.org/archives/dev/2019-May/131498.html
Fixes: c0749f7096c7 ("timer: allow management in shared memory")
Cc: stable@dpdk.org
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Currently, nothing stops DPDK to attempt to run primary and
secondary processes while having different versions. This
can lead to all sorts of weird behavior and makes it harder
to maintain compatibility without breaking ABI every once
in a while.
Fix it by explicitly disallowing running different DPDK
versions as primary and secondary processes.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Currently, each EAL will update internal/shared config in their
own way at init, resulting in needless duplication of code and
OS-dependent behavior. Move the functions to a common file and
add missing FreeBSD steps.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David Marchand <david.marchand@redhat.com>
Currently, mcfg completion function exists in two independent
implementations doing the same thing, which is bug prone.
Unify the two functions and move them into one place.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David Marchand <david.marchand@redhat.com>
Currently, the function to wait until config completion is
static inline for no reason. Move its implementation to
an EAL common file.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David Marchand <david.marchand@redhat.com>
There is no reason to pack the memconfig structure, and doing so
gives out warnings in some static analyzers. Fix it by removing
the packed attributed.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David Marchand <david.marchand@redhat.com>
Now that everything that has ever accessed the shared memory
config is doing so through the public API's, we can make it
internal. Since we're removing quite a few headers from
rte_eal_memconfig.h, we need to add them back in places
where this header is used.
This bumps the ABI, so also change all build files and make
update documentation.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David Marchand <david.marchand@redhat.com>
Currently, in order to lock access to the mempool list, a direct
access to the shared memory structure is needed. Add an API to do
the same, and search-and-replace all usages.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David Marchand <david.marchand@redhat.com>
Currently, locking/unlocking the TAILQ list requires direct
access to the shared memory config. Add an API to do the same,
and search-and-replace all usages.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David Marchand <david.marchand@redhat.com>
Currently, the memory hotplug is locked automatically by all
memory-related _walk() functions, but sometimes locking the
memory subsystem outside of them is needed. There is no
public API to do that, so it creates a dependency on shared
memory config to be public. Fix this by introducing a new
API to lock/unlock the memory hotplug subsystem.
Create a new common file for all things mem config, and a
new API namespace rte_mcfg_*, and search-and-replace all
usages of the locks with the new API.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David Marchand <david.marchand@redhat.com>
Currently, if the bus selects IOVA as PA, the memory init can fail when
lacking access to physical addresses.
This can be quite hard for normal users to understand what is wrong
since this is the default behavior.
Catch this situation earlier in eal init by validating physical addresses
availability, or select IOVA when no clear preferrence had been expressed.
The bus code is changed so that it reports when it does not care about
the IOVA mode and let the eal init decide.
In Linux implementation, rework rte_eal_using_phys_addrs() so that it can
be called earlier but still avoid a circular dependency with
rte_mem_virt2phys().
In FreeBSD implementation, rte_eal_using_phys_addrs() always returns
false, so the detection part is left as is.
If librte_kni is compiled in and the KNI kmod is loaded,
- if the buses requested VA, force to PA if physical addresses are
available as it was done before,
- else, keep iova as VA, KNI init will fail later.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The function rte_malloc_set_limit was defined but never implemented.
Mark it as deprecated for now, and remove in next release.
There is no point in keeping dead code.
"You Aren't Going to Need It"
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Linux EAL will attach the shared config at an arbitrary address,
find out where the shared config is mapped in the primary, and
then will reattach it at that exact address.
FreeBSD version doesn't seem to go for that extra reattach step,
which makes one wonder how did it ever work in the first place.
Fix the FreeBSD init to also reattach shared config to the exact
same place the primary process has it.
Fixes: 764bf26873b9 ("add FreeBSD support")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
When init is complete, EAL is supposed to update internal config
to indicate that initialization is complete. Add missing write.
Fixes: a99c96e96ad3 ("eal: add internal flag of init completed")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
According to API, 'rte_dev_probe()' and 'rte_dev_remove()' must
return 0 or negative error code. Bus code returns positive values
if device wasn't recognized by any driver, so the result of
'bus->plug/unplug()' must be converted. 'local_dev_probe()' and
'local_dev_remove()' also has their internal API, so the conversion
should be done there.
Positive on remove means that device not found by driver.
Positive on probe means that there are no suitable buses/drivers,
i.e. device is not supported.
Users of these API fixed to provide a good example by respecting
DPDK API. This also will allow to catch such issues in the future.
Fixes: a3ee360f4440 ("eal: add hotplug add/remove device")
Fixes: 244d5130719c ("eal: enable hotplug on multi-process")
Cc: stable@dpdk.org
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Putting a '__attribute__((deprecated))' in the middle of a function
prototype does not result in the expected result with gcc (while clang
is fine with this syntax).
$ cat deprecated.c
void * __attribute__((deprecated)) incorrect() { return 0; }
__attribute__((deprecated)) void *correct(void) { return 0; }
int main(int argc, char *argv[]) { incorrect(); correct(); return 0; }
$ gcc -o deprecated.o -c deprecated.c
deprecated.c: In function ‘main’:
deprecated.c:3:1: warning: ‘correct’ is deprecated (declared at
deprecated.c:2) [-Wdeprecated-declarations]
int main(int argc, char *argv[]) { incorrect(); correct(); return 0; }
^
Move the tag on a separate line and make it the first thing of function
prototypes.
This is not perfect but we will trust reviewers to catch the other not
so easy to detect patterns.
sed -i \
-e '/^\([^#].*\)\?__rte_experimental */{' \
-e 's//\1/; s/ *$//; i\' \
-e __rte_experimental \
-e '/^$/d}' \
$(git grep -l __rte_experimental -- '*.h')
Special mention for rte_mbuf_data_addr_default():
There is either a bug or a (not yet understood) issue with gcc.
gcc won't drop this inline when unused and rte_mbuf_data_addr_default()
calls rte_mbuf_buf_addr() which itself is experimental.
This results in a build warning when not accepting experimental apis
from sources just including rte_mbuf.h.
For this specific case, we hide the call to rte_mbuf_buf_addr() under
the ALLOW_EXPERIMENTAL_API flag.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
We had some inconsistencies between functions prototypes and actual
definitions.
Let's avoid this by only adding the experimental tag to the prototypes.
Tests with gcc and clang show it is enough.
git grep -l __rte_experimental |grep \.c$ |while read file; do
sed -i -e '/^__rte_experimental$/d' $file;
sed -i -e 's/ *__rte_experimental//' $file;
sed -i -e 's/__rte_experimental *//' $file;
done
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This function is not visible from outside this code unit.
Fixes: 84e7477e10b1 ("mem: add thread unsafe version for DMA mask check")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The incriminated commit promoted this symbol as stable but the
definition still has the tag.
Fixes: 787ae736a3d9 ("vfio: remove experimental tag")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The incriminated commit promoted those symbols as stable but the
prototypes still have the tag.
Fixes: 73eca2f77f4c ("devargs: promote experimental API as stable")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This API was experimental and not properly marked in the map file.
But looking more closely, this is just an internal wrapper for EAL init.
Hide it in the hotplug code.
Fixes: 244d5130719c ("eal: enable hotplug on multi-process")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
When seeding the pseudo-random number generator, replace the 64-bit
RDSEED with two 32-bit RDSEED instructions to allow building and
running on 32-bit x86.
Fixes: faf8fd252785 ("eal: improve entropy for initial PRNG seed")
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Add a function rte_rand_max() which generates an uniformly distributed
pseudo-random number less than a user-specified upper bound.
The commonly used pattern rte_rand() % SOME_VALUE creates biased
results (as in some values in the range are more frequently occurring
than others) if SOME_VALUE is not a power of 2.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Replace the use of rte_get_timer_cycles() with getentropy() for
seeding the pseudo-random number generator. getentropy() provides a
more truly random value.
getentropy() requires glibc 2.25 and Linux kernel 3.17. In case
getentropy() is not found at compile time, or the relevant syscall
fails in runtime, the rdseed machine instruction will be used as a
fallback.
rdseed is only available on x86 (Broadwell or later). In case it is
not present, rte_get_timer_cycles() will be used as a second fallback.
On non-Meson builds, getentropy() will not be used.
Suggested-by: Bruce Richardson <bruce.richardson@intel.com>
Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit replaces rte_rand()'s use of lrand48() with a DPDK-native
combined Linear Feedback Shift Register (LFSR) (also known as
Tausworthe) pseudo-random number generator.
This generator is faster and produces better-quality random numbers
than the linear congruential generator (LCG) of lib's lrand48(). The
implementation, as opposed to lrand48(), is multi-thread safe in
regards to concurrent rte_rand() calls from different lcore threads.
A LCG is still used, but only to seed the five per-lcore LFSR
sequences.
In addition, this patch also addresses the issue of the legacy
implementation only producing 62 bits of pseudo randomness, while the
API requires all 64 bits to be random.
This pseudo-random number generator is not cryptographically secure -
just like lrand48().
Bugzilla ID: 114
Bugzilla ID: 276
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
When adding an alarm, if an error happen when registering
the common alarm callback, it is not considered as a major failure.
The alarm is then inserted in the list.
However it was returning an error code after inserting the alarm.
The error code is not set anymore to be consistent with the behaviour.
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
This patch changes some void functions to return a value,
so that the init sequence may tear down orderly
instead of calling panic.
Signed-off-by: Arnon Warshavsky <arnon@qwilt.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
As there is no ethtool support in KNI anymore,
PCI related information is no longer needed.
Fixes: ea6b39b5b847 ("kni: remove ethtool support")
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some helpers in the header file are forced inlined other are
only inlined, this patch forces inline for all.
It will avoid it to be embedded as functions when called multiple
times in the same object file. For example, when we added packed
ring support in vhost-user library, rte_memcpy_generic got no
more inlined.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Currently, IPC API will silently ignore unsupported IPC.
Fix the API call to explicitly handle unsupported IPC cases.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Currently, IPC API will silently ignore unsupported IPC.
Fix the API call and its callers to explicitly handle
unsupported IPC cases.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Currently, IPC API will silently ignore unsupported IPC.
Fix the API call and its callers to explicitly handle
unsupported IPC cases.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Currently, unregister will be attempted even if IPC wasn't
supported in the first place. It is harmless, but for
consistency reasons, update the unregister API call to
exit early when IPC is not supported.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Currently, IPC API will silently ignore unsupported IPC.
Fix the API call and its callers to explicitly handle
unsupported IPC cases.
For primary processes, it is OK to not have IPC because
there may not be any secondary processes in the first place,
and there are valid use cases that disable IPC support, so
all primary process usages are fixed up to ignore IPC
failures.
For secondary processes, IPC will be crucial, so leave all
of the error handling as is.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Currently, IPC API will silently ignore unsupported IPC.
Fix the API call and its callers to explicitly handle
unsupported IPC cases.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
move_pages() is only used to get the numa node id, but this function
is not allowed by default in docker (it needs CAP_SYS_NICE and an update of
the seccomp profile).
get_mempolicy() also requires CAP_SYS_NICE but doesn't need any change in
the default seccomp profile.
Note that the returned value of move_pages() was not checked, thus some
errors could be hidden (if the requested id was 0).
Fixes: 582bed1e1d1d ("mem: support mapping hugepages at runtime")
Cc: stable@dpdk.org
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Didier Pallard <didier.pallard@6wind.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
When checking RTE_PCI_DRV_IOVA_AS_VA flag to determine IOVA mode,
pci_one_device_has_iova_va() returns true only if kernel driver of the
device is vfio. However, Mellanox mlx4/5 PMD doesn't need to be detached
from kernel driver and attached to VFIO/UIO. Control path still goes
through the existing kernel driver, which is mlx4_core/mlx5_core. In order
to make RTE_PCI_DRV_IOVA_AS_VA effective for mlx4/mlx5 PMD, a new kernel
driver type has to be introduced.
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>