After DCF is reset by PF, the DCF device un-initialization cannot
function normally, ignore the failure does not help since the kernel
does not clean up resource.
The patch workaround the issue by triggering an additional DCF enable/
disable cycle when a passive reset is detected.
Fixes: 1a86f4dbdf42 ("net/ice: support DCF device reset")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Removing direct access to interrupt handle structure fields,
rather use respective get set APIs for the same.
Making changes to all the drivers access the interrupt handle fields.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.
All internal components switched to using new names.
Syntax fixed on lines that this patch touches.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
The request of getting VF VSI map request may fail when DCF is busy,
this patch adds retry mechanism to make it able to succeed.
Fixes: b09d34ac8584 ("net/ice: fix flow redirector")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
DCF PMD needs to support rte_eth_dev_reset, the reason is when a DCF
instance is killed, all the flow rules still exists in hardware, when
DCF gets to reconnect, it already lost the flow context, and if the
application wants to create new rules, it may fail due to firmware
reports rules already exist.
The rte_eth_dev_reset API provides a more elegant way for the
application to reset DCF when reconnect happens.
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Added macros to simplify print of MAC address.
The six bytes of a MAC address are extracted in
a macro here, to improve code readablity.
Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Added macro to print six bytes of MAC address.
The MAC addresses will be printed in upper case
hexadecimal format.
In case there is a specific check for lower case
MAC address, the user may need to make a change in
such test case after this patch.
Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When DCF configures rx_queues, it may cause the pointer of
rx_queues to go out of bounds.
This patch expands the scope of the judgment condition to
fix this issue.
Fixes: 4b0d391f0eab ("net/ice: add queue config in DCF")
Cc: stable@dpdk.org
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Since DPDK 20.11 the default rxdid is changed from 16 to 22, but the
DCF data path didn't change, the patch fix the gap.
Fixes: 12443386a0b0 ("net/ice: support flex Rx descriptor RxDID22")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Zhimin Huang <zhiminx.huang@intel.com>
When closing DCF, the bandwidth limit configured for VFs by DCF is not
cleared correctly. The configuration will still take effect when DCF starts
again, if VFs are not re-allocated. This patch cleared VFs bandwidth limit
when DCF closes, and DCF needs to re-configure bandwidth for VFs when it
starts next time.
Fixes: 3a6bfc37eaf4 ("net/ice: support QoS config VF bandwidth in DCF")
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When VF reset happens, the QoS bandwidth configuration will be lost. If
the reset is not caused by DCB change, it is supposed to replay the
bandwidth configuration to VF by DCF. In this patch, when a vsi update
PF event is received from PF after VF reset, and it is confirmed that
DCB is not changed, bandwidth configuration will be replayed.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch supports the ETS-based QoS configuration. It enables the DCF
to configure bandwidth limits for each VF VSI of different TCs. A
hierarchy scheduler tree is built with port, TC and VSI nodes.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The virtchnl message is handled one by one by checking opcode to match
the response for the request.
The DCF AdminQ command with buffer needs two virtchnl commands, one is
to handle the AdminQ descriptor, the other is to the handle AdminQ
buffer. If both of them are sent to PF successfully, it needs to wait
two responses from PF, even if the AdminQ descriptor command gets the
failure response. Since PF will handle them one by one, and send back
the response for each.
If not wait for the buffer message response until timeout to drain out
the virtchnl command queue, it will cause the next AdminQ command with
buffer to get the stall buffer response from previous.
Fixes: daa714d55c72 ("net/ice: handle AdminQ command by DCF")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The rte_ethdev_driver.h, rte_ethdev_vdev.h and rte_ethdev_pci.h files are
for drivers only and should be a private to DPDK and not installed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Steven Webster <steven.webster@windriver.com>
Add the DCF port representor infrastructure for the VFs of DCF attached
PF. Then the standard ethdev API like VLAN can be used to configure the
VFs.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The initialization of selecting the handler for scalar Rx path FlexiMD
fields extraction into mbuf is missed, it will cause segmentation fault
(core dumped).
Also add the missed support to handle RXDID 16, which has RSS hash value
on Qword 1.
Fixes: 7a340b0b4e03 ("net/ice: refactor Rx FlexiMD handling")
Cc: stable@dpdk.org
Reported-by: Alvin Zhang <alvinx.zhang@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Fix the build error in DCF when CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC
compilation option is enabled. Legacy 16 byte Rx descriptor is not
supported in DCF. If it is enabled, DCF configuration stops.
Fixes: 929eceefaba7 ("net/ice: add queue start and stop for DCF")
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add support to add and delete MAC address filter in DCF.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Ting Xu <ting.xu@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Add support to get and reset Rx/Tx stats in DCF. Query stats
from PF.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Ting Xu <ting.xu@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Add queue start and stop in DCF. Support queue enable and disable
through virtual channel. Add support for Rx queue mbufs allocation
and queue reset.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Ting Xu <ting.xu@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Add queues and Rx queue irqs configuration during device start
in DCF. The setup is sent to PF via virtchnl.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Ting Xu <ting.xu@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Enable RSS parameters initialization and get the supported
flexible descriptor RXDIDs bitmap from PF during DCF init.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Ting Xu <ting.xu@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
If there's VF reset, the kernel PF will remove rules
associated with the reset VF no matter the HW VSI ID
is changed or not. So DCF should redirector all rules
associated with the reset VF no matter the HW VSI ID
is changed or not.
Fixes: 3b3757bda3c3 ("net/ice: get VF hardware index in DCF")
Fixes: c8183dd8e059 ("net/ice: redirect switch rule to new VSI")
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
The DCF (Device Config Function) needs the hardware index of the VFs to
control the flow setting. And also if the VF resets, the index may be
changed, so it should handle this in VF reset event.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The DCF (Device Config Function) works at the user PF level, it can't
access the real PF hardware directly. So it will pass through the PF's
AdminQ command by the DCF's mailbox.
And the DCF is mainly used to control the flow setting of other VFs, so
it only needs to initialize some core functions related to the flow.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The DCF (Device Config Function) splits the AdminQ command into two
parts: one is the descriptor of AdminQ command, the other is the buffer
of AdminQ command (the descriptor has BUF flag set). When both of them
are received by the PF, the PF will handle them as one command.
And also, the filled descriptor and buffer of the response will be sent
back to DCF one by one through the virtchnl from PF.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Since the DCF (Device Config Function) controls the flow setting of
other VFs by the mailbox with PF, for security, it needs to acquire
the DCF capability from PF when starts, and disable it when exits.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Introduce the DCF (Device Config Function) feature in the ice PMD, it
works as a standalone PMD which doesn't handle the packet Rx/Tx related
things. Its hardware entity is the VF.
Add the basic DCF hardware initialization, this is specified by devarg
'cap=dcf'.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
