The rx_queues and tx_queues fields of the data structure points to a
struct virtnet_rx or virtnet_tx. Casting it to a virtqueue is an error.
It does not trigger any bug because pointer is not dereferenced inside
the function, but it can become a bug if this code is copy/pasted and
vq is dereferenced.
Fixes: 01ad44fd37 ("net/virtio: split Rx/Tx queue")
Cc: stable@dpdk.org
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
DPDK has already the definition of Ethernet numeric link speeds in Mbps
in the file Rte_ethdev.h, it is unnecessary to rededine virtio specific
link speeds macros again.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
When setting the MAC address, the ethdev layer copies the new mac
address in dev->data->mac_addrs[0] before calling the dev_ops.
Therefore, "is_same_ether_addr(mac_addr, dev->data->mac_addrs)" was
always true, and the MAC was never set. Remove this test to fix the
issue.
Fixes: 943c2d899a ("net/i40e: set VF MAC from VF")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add a mode type check for tunnel mode, if FDIR is in this mode,
it does not need to do sanity check for x550.
Fixes: a2ba854ec6 ("net/ixgbe: fix MAC VLAN filter fail problem")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
All ipsec related settings are being held in the driver
private data to allow easy add and remove of SAS. There
is no need to keep a record of the keys, and also
storing the keys can be a security issue.
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
According to loopback mode, setup loopback link or not.
If loopback link is set, packets transmitted will be
looped back to received side directly.
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add support for PPPoE and L2TP packet types parser.
Change parser as new metadata 'OIPV4' and 'OIPV6'
added in profile to distinguish outer IP and inner
IP.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
ixgbe ntuple filter in rte_flow needs to support diversion data
with less than 5 tuple parameters. So it adds this new support
in parser code. This patch also adds parsering vlan pattern code
in ntuple filter in order to handle some cases like vlan in flow
API.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The first FDIR rule for some PCTYPE will configure input set and
create flow, the following flows must use the same input set,
otherwise it will cause input set conflict and fail to create flow.
If it creates the first rule after flow flush, input set should be
re-configured.
Fixes: 42044b69c6 ("net/i40e: support input set selection for FDIR")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When using kernel PF + DPDK VF, if setting VLAN strip on
or off in VF side after setting PVID for VF with ethtool in
PF side, it will cause VF Tx error. The root cause is that
Rx VLAN offload is not permitted after setting PVID for VF
in kernel PF side.
This patch fixes the issue by check VLAN offload capability
when setting VLAN offload.
Fixes: 5f0b95d59a ("net/i40e: support VLAN stripping for VF")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
FM10K HW does not have such restrictions.
Enabling RSS with single queue is not used to distribute flow, but
it can be used to compute a RSS hash value. It can reduce CPU
cycles of computing a hash value with five tuples. In addition,
there is an explicit method to disable RSS instead of an obscure
way.
Signed-off-by: Yangchao Zhou <zhouyates@gmail.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Internal variable containing the number of TX queues for a device,
was being incorrectly assigned the number of RX queues, instead of TX.
Fixes: 27b609cbd1 ("ethdev: move the multi-queue mode check to specific drivers")
Cc: stable@dpdk.org
Signed-off-by: Yangchao Zhou <zhouyates@gmail.com>
Acked-by: Wei Dai <wei.dai@intel.com>
The datasheet says, if using MSI-X mode, the PBA support
bit of the GPIE register must be set to 1.
DPDK uses polling mode, we cannot hit this issue in the
scenario DPDK PF + DPDK VF. If we use DPDK PF + kernel VF,
as the kernel driver uses interrpt mode, VF may hit RX hang
after running hours.
Fixes: 00e30184da ("ixgbe: add PF support")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
When closing port, we need to send mailbox messages to switch manager
to reset multicast mode and delete logical port. In the latest IES_SDK,
e.g. v4.3.3, switch takes longer time to handle these mailbox messages.
So this patch adds longer delay to accommodate this change. Otherwise,
the mailbox will be closed before all the messages are handled, as a
result, the logical port remains in switch manager after port is closed.
Fixes: b961fe9344 ("net/fm10k: fix MAC address removal from switch")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Vlan offload flag "rx_mode.hw_vlan_extend" should be considerred at
rte_eth_dev_configure stage as well as "rx_mode.hw_vlan_strip" and
"rx_mode.hw_vlan_filter".
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
MLX5 NIC does not support all hash fields, this patch limit by refusing
impossible RSS combination to avoid errors.
Fixes: 2f97422e77 ("mlx5: support RSS hash update and get")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Checking HW checksum offload flag for outer IP is missing. If flag is set
for only outer IP, this can't be set properly.
Fixes: f5fde52051 ("net/mlx5: add hardware checksum offload for tunnel packets")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
The trigger for PMD to use the application RSS configuration should be
based on the validity of rss_key and not the rss_key_len. Otherwise
segmentation fault can occur if application provide valid RSS key length
but without any RSS key.
Fixes: 29c1d8bb3e ("net/mlx5: handle a single RSS hash key for all protocols")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Remove multi-segment packet handling from mlx5_tx_burst_empw() as there's
fallback to regular Tx for such packets.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
mlx5_tx_burst_empw() falls back to legacy Tx descriptor for multi-segmented
packets without taking advantage of inlining. In many cases, the 1st
segment can be inlined and this could make device fetch only one segment
instead of two. This helps saving PCIe bandwidth when transmitting out
multi-segmented packets with still using the Enhanced Multi-Packet Send for
other packets.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
mlx5_tx_burst() doesn't inline data from the 2nd segment. If there's still
enough room in the descriptor after inlining the 1st segment, further
inlining from the 2nd segment would be beneficial to save PCIe bandwidth.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
If there're more MR(Memroy Region)'s than the size of per-queue cache, the
cache can be overflowed and corrupt the following data structure in
mlx5_txq_data.
Fixes: 6e78005a9b ("net/mlx5: add reference counter on DPDK Tx queues")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Although granularity of chunks in a mempool is a cacheline, addresses are
extended to align to page boundary for performance reason in device when
registering a MR (Memory Region). This could make some regions overlap,
then can cause Tx completion error due to incorrect LKEY search. If the
error occurs, the Tx queue will get stuck. To avoid it, end address of a
packet segment is used in LKEY search.
Fixes: b0b0938457 ("net/mlx5: use buffer address for LKEY search")
Cc: stable@dpdk.org
Reported-by: Hanoch Haim <hhaim@cisco.com>
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Ethdev layer has an API to configure vlan setting on the flight, i.e.
when the port state is start.
Calling such API when the port is stopped may cause segmentation fault
as the related Verbs contexts has not been created yet.
Fixes: 09cb5b5817 ("net/mlx5: separate DPDK from verbs Rx queue objects")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
There is a school of thought that rte_eth_dev_default_mac_addr_set()
must call the PMD callback first and then save the new MAC address
in dev->data->mac_addrs[0]. If this concept gets approved, it will
break the current approach used in sfc driver as the latter relies
on the assumption that the new MAC address is already contained in
dev->data->mac_addrs[0], and, if adapter restart is needed to make
the HW apply the new address, the outdated value will be retrieved
from dev->data. In order to preclude any possible bugs, this patch
adds device private storage for the up-to-date copy of the address.
Fixes: c100fd464b ("net/sfc: support main MAC address change")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Fixes: e56fa9c23e ("net/sfc: add kvarg control for MAC statistics update period")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Fixes: 295f647a38 ("net/sfc: set multicast address list in started state only")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Fixes: 3b257f7e6c ("net/sfc: request MAC stats upload immediately on port start")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
The qede firmware expects minimum one RX queue to be created, otherwise
it results in firmware exception. So a check is added to prevent that.
Fixes: ec94dbc573 ("qede: add base driver")
Cc: stable@dpdk.org
Signed-off-by: Harish Patil <harish.patil@cavium.com>
In the function bond_mode_8023ad_enable(), the var i is used as slave
port id to the function bond_mode_8023ad_activate_slave().
This variable is only a index for array internals->active_slaves.
So its need to be fixed and change i to internals->active_slaves[i].
Fixes: 46fb436836 ("bond: add mode 4")
Cc: stable@dpdk.org
Signed-off-by: Jerry Lilijun <jerry.lilijun@huawei.com>
Tested-by: Kyle Larose <klarose@sandvine.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This counter saved the descriptor elements which are waiting to be
completed and was used to know if completion function should be
called.
This completion check can be done by other elements management
variables and we can prevent this counter management.
Remove this counter and replace the completion check easily by other
elements management variables.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Using power of 2 descriptors number makes the ring management easier
and allows to use mask operation instead of wraparound conditions.
Adjust Tx descriptor number to be power of 2 and change calculation to
use mask accordingly.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The previuse code took a send queue entry size for stamping from the
send queue entry pointed by completion queue entry; This 2 reads were
done per packet in completion stage.
The completion burst packets number is managed by fixed size stored in
Tx queue, so we can infer that each valid completion entry actually frees
the next fixed number packets.
The descriptors ring holds the send queue entry, so we just can infer
all the completion burst packet entries size by simple calculation and
prevent calculations per packet.
Adjust completion functions to free full completion bursts packets
by one time and prevent per packet work queue entry reads and
calculations.
Save only start of completion burst or Tx burst send queue entry
pointers in the appropriate descriptor element.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The Tx queue send ring was managed by Tx block head,tail,count and mask
management variables which were used for managing the send queue remain
space and next places of empty or completed work queue entries.
This method suffered from an actual addresses recalculation per packet,
an unnecessary Tx block based calculations and an expensive dual
management of Tx rings.
Move send queue ring calculation to be based on actual addresses while
managing it by descriptors ring indexes.
Add new work queue entry pointer to the descriptor element to hold the
appropriate entry in the send queue.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
mlx4 Tx block can handle up to 4 data segments or control segment + up
to 3 data segments. The first data segment in each not first Tx block
must validate Tx queue wraparound and must use IO memory barrier before
writing the byte count.
The previous multi-segment code used "for" loop to iterate over all
packet segments and separated first Tx block data case by "if"
statements.
Use switch case and unconditional branches instead of "for" loop can
optimize the case and prevents the unnecessary checks for each data
segment; This hints to compiler to create optimized jump table.
Optimize this case by switch case and unconditional branches usage.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
At error time, the first 4 bytes of each WQE Tx block still have not
writen, so no need to stamp them because they are already stamped.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
There is no need to check Tx queue wraparound for segments which are
not at the beginning of a Tx block. Especially relevant in a single
segment case.
Remove unnecessary aforementioned checks from Tx path.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
When invalid lkey is sent to HW, HW sends an error notification in
completion function.
The previous code wouldn't crash but doesn't add any application report
in case of completion error, so application cannot know that packet
actually was dropped in case of invalid lkey.
Return back the lkey validation to Tx path.
Fixes: 2eee458746 ("net/mlx4: remove error flows from Tx fast path")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Chnaged ibv_flow_attr type for allmulti rule to IBV_FLOW_ATTR_MC_DEFAULT
instead of IBV_FLOW_ATTR_NORMAL, in case allmulti was enabled.
Fixes: 272733b5 ("net/mlx5: use flow to enable unicast traffic")
Cc: stable@dpdk.org
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This workaround was needed to properly handle device removal with old
Mellanox OFED releases that are not supported by this PMD anymore.
Starting from rdma-core v16 this removal issue shouldn't happen when
setting MLX4_DEVICE_FATAL_CLEANUP environment variable to 1.
Set the aforementioned variable to 1.
Reverts: 5f4677c6ad ("net/mlx4: workaround verbs error after plug-out")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
As there were less number of CPU cycles in between when we access
the parse results and when we prefetch them, this patch modifies
the prefetch of the next parse result.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Parsing the annotation has multiple if checks in the data path.
These are reduced for common cases like IPv4/IPv6 and UDP/TCP
packets to enhance performance of these generic cases.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
