When a tbl8 group is getting attached to a tbl24 entry, lookup
might fail even though the entry is configured in the table.
For ex: consider a LPM table configured with 10.10.10.1/24.
When a new entry 10.10.10.32/28 is being added, a new tbl8
group is allocated and tbl24 entry is changed to point to
the tbl8 group. If the tbl24 entry is written without the tbl8
group entries updated, a lookup on 10.10.10.9 will return
failure.
Correct memory orderings are required to ensure that the
store to tbl24 does not happen before the stores to tbl8 group
entries complete.
Besides, explicit structure alignment is used to address atomic
operation building issue with older version clang.
Suggested-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
When a tbl8 group is getting attached to a tbl24 entry, lookup
might fail even though the entry is configured in the table.
For ex: consider a LPM table configured with 10.10.10.1/24.
When a new entry 10.10.10.32/28 is being added, a new tbl8
group is allocated and tbl24 entry is changed to point to
the tbl8 group. If the tbl24 entry is written without the tbl8
group entries updated, a lookup on 10.10.10.9 will return
failure.
Correct memory orderings are required to ensure that the
store to tbl24 does not happen before the stores to tbl8 group
entries complete.
The ordering patches in general have no notable impact on LPM
performance test on both Arm A72 platform and x86 E5 platform.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Many exported headers rely on definitions found in rte_config.h without
including it, as shown by the following command:
grep -L '^#include <rte_config.h>' -- \
$(grep -Rl \
$(sed -n '/^#define \([^ ]\+\).*$/{s//\1/;H;};${x;s/\n//;s/\n/\\|/g;p;}' \
build/include/rte_config.h) \
-- build/include/)
We cannot assume external applications will include rte_config.h on their
own, neither directly nor through a -include parameter like DPDK does
internally.
This not only causes obvious compilation failures that can be reproduced
with check-includes.sh such as:
[...]/rte_memory.h:88:43: error: ‘RTE_CACHE_LINE_SIZE’ was not declared in
this scope
#define __rte_cache_aligned __rte_aligned(RTE_CACHE_LINE_SIZE)
^
It also results in less visible issues, for instance rte_hash_crc.h relying
on RTE_ARCH_X86_64's presence to provide dedicated inline functions.
This patch partially reverts the commit below and adds missing include
lines to the remaining files.
Fixes: f1a7a5c5f404 ("remove include of generated config header")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Exported header files used by applications should allow the strictest
compiler flags. Language extensions used in many places must be explicitly
marked to avoid warnings and compilation failures.
Unnamed structs/unions are allowed since C11, however many compiler
versions do not use this mode by default.
This commit prevents the following errors:
error: ISO C99 doesn't support unnamed structs/unions
error: struct has no named members
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Exported header files used by applications should allow the strictest
compiler flags. Language extensions used in many places must be explicitly
marked or removed to avoid warnings and compilation failures.
This commit prevents the following errors:
error: type of bit-field `[...]' is a GCC extension
Note: the standard does not require implementations to issue a diagnostic
message with these, and such errors do not occur with recent GCC or clang
versions. However, GCC 4.7 is still common and using the extension keyword
is easier than checking compiler version.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Exported header files used by applications should allow the strictest
compiler flags. Language extensions used in many places must be explicitly
marked or removed to avoid warnings and compilation failures.
The extension keyword is used whenever the C99 syntax cannot do it.
This commit prevents the following errors:
error: ISO C forbids zero-size array `[...]'
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch adds ppc64le port for LPM library in DPDK.
Signed-off-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Enabled CONFIG_RTE_LIBRTE_LPM, CONFIG_RTE_LIBRTE_TABLE,
CONFIG_RTE_LIBRTE_PIPELINE libraries for arm and arm64
TABLE, PIPELINE libraries were disabled due to LPM library dependency.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
-Used architecture agnostic xmm_t to represent 128 bit SIMD variable
-Introduced vect_* API abstraction in app/test to test rte_lpm_lookupx4
API in architecture agnostic way
-Moved rte_lpm_lookupx4 SSE implementation to architecture specific
rte_lpm_sse.h file to accommodate new rte_lpm_lookupx4 implementation
for a different architecture.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
A new rte_lpm_config structure is used so LPM library will allocate
exactly the amount of memory which is necessary to hold application’s
rules.
Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
This patch extend next_hop field from 8-bits to 24-bits in LPM library
for IPv4.
Added versioning symbols to functions and updated
library and applications that have a dependency on LPM library.
Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
The tbl8 and tbl24 structures were essentially identical except for
slightly different names for one or two fields. Merge these two
structures into a single structure definition.
Two fields have been renamed as part of this change: the
"ext_entry" field in the tbl24 has been renamed to "valid_group" to match
the tbl8 value to make the merge easier, and the "tbl8_gindex" field has
been renamed to "group_idx". The "valid_group" field now serves two
purposes: in a tbl8 it indicates if the group, i.e. the tbl8, is valid,
and in a tbl24, it indicates if the "group_idx" is valid, i.e. whether
the value is a next_hop or a tbl8 index. [The name "group_idx" was used
to make this latter link between the fields clearer]
Suggested-by: Vladimir Medvedkin <medvedkinv@gmail.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The library version is incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This module uses type conversion between struct and int.
Also truncation and comparison is used with this int.
It is not safe for different endian arch.
Add ifdef for big endian struct to fix this issue.
Signed-off-by: Xuelin Shi <xuelin.shi@freescale.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
New data type to manipulate 256 bit AVX values.
Rename field in the rte_xmm to keep common naming across SSE/AVX fields.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Since the data structures such as rings are shared in their entirety,
those TAILQ pointers are shared as well. Meaning that, after a
successful rte_ring creation, the tailq_next pointer of the last
ring in the TAILQ will be updated with a pointer to a ring which may
not be present in the address space of another process (i.e. a ring
that may be host-local or guest-local, and not shared over IVSHMEM).
Any successive ring create/lookup on the other side of IVSHMEM will
result in trying to dereference an invalid pointer.
This patchset fixes this problem by creating a default tailq entry
that may be used by any data structure that chooses to use TAILQs.
This default TAILQ entry will consist of a tailq_next/tailq_prev
pointers, and an opaque pointer to arbitrary data. All TAILQ
pointers from data structures themselves will be removed and
replaced by those generic TAILQ entries, thus fixing the problem
of potentially exposing local address space to shared structures.
Technically, only rte_ring structure require modification, because
IVSHMEM is only using memzones (which aren't in TAILQs) and rings,
but for consistency's sake other TAILQ-based data structures were
adapted as well.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Added API function for LPM IPv4 and IPv6 to query for the existence
of a rule/route and return the next hop ID associated with the route
if route is present.
This is used by the Packet Framework LPM table for implementing a
routing table.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
Allows to lookup four IP addresses in an LPM table.
Uses SSE instrincts.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
This commit removes trailing whitespace from lines in files. Almost all
files are affected, as the BSD license copyright header had trailing
whitespace on 4 lines in it [hence the number of files reporting 8 lines
changed in the diffstat].
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: remove spaces before tabs in libs]
[Thomas: remove more trailing spaces in non-C files]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
