Extend modify_field Flow API with support of Meter Color Marker
modifications. It allows setting the packet's metadata to any
color marker: green, yellow or red. A user is able to specify
an initial packet color for Meter API or create simple Metering
and Marking flow rules based on his own coloring algorithm.
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Provide an ability to use a Color Marker set by a Meter
as a matching item in Flow API. The Color Marker reflects
the metering result by setting the metadata for a
packet to a particular codepoint: green, yellow or red.
Add testpmd command line to match on a meter color:
flow create 0 ingress group 0 pattern meter color is green / end
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Similar to RISC-V, the current version for LoongArch do not support
vector. Re-use vector processing stubs in ixgbe PMD defined for PPC
for LoongArch. This enables ixgbe PMD usage in scalar mode on
LoongArch.
The ixgbe PMD driver was validated with Intel X520-DA2 NIC and the
test-pmd application, l2fwd, l3fwd examples.
Signed-off-by: Min Zhou <zhoumin@loongson.cn>
Add all necessary elements for DPDK to compile and run EAL on
LoongArch64 Soc.
This includes:
- EAL library implementation for LoongArch ISA.
- meson build structure for 'loongarch' architecture.
RTE_ARCH_LOONGARCH define is added for architecture identification.
- xmm_t structure operation stubs as there is no vector support in
the current version for LoongArch.
Compilation was tested on Debian and CentOS using loongarch64
cross-compile toolchain from x86 build hosts. Functions were tested
on Loongnix and Kylin which are two Linux distributions supported
LoongArch host based on Linux 4.19 maintained by Loongson
Corporation.
We also tested DPDK on LoongArch with some external applications,
including: Pktgen-DPDK, OVS, VPP.
The platform is currently marked as linux-only because there is no
other OS than Linux support LoongArch host currently.
The i40e PMD driver is disabled on LoongArch because of the absence
of vector support in the current version.
Similar to RISC-V, the compilation of following modules has been
disabled by this commit and will be re-enabled in later commits as
fixes are introduced:
net/ixgbe, net/memif, net/tap, example/l3fwd.
Signed-off-by: Min Zhou <zhoumin@loongson.cn>
RTE_TEST_[RT]X_DESC_DEFAULT and RTE_TEST_[RT]X_DESC_MAX macros have been
copied in a lot of app/ and examples/ code.
Those macros are local to each program.
They are not related to a DPDK public header/API, drop the RTE_TEST_
prefix.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@amd.com>
The function return type is changed to fixed width uint32_t
to be consistent with what appears to be the original authors intent.
It doesn't make much sense to return signed integers for these functions.
Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Structure rte_security_session is moved to internal
headers which are not visible to applications.
The only field which should be used by app is opaque_data.
This field can now be accessed via set/get APIs added in this
patch.
Subsequent changes in app and lib are made to compile the code.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Tested-by: Gagandeep Singh <g.singh@nxp.com>
Tested-by: David Coyle <david.coyle@intel.com>
Tested-by: Kevin O'Sullivan <kevin.osullivan@intel.com>
Structure rte_cryptodev_sym_session is moved to internal
headers which are not visible to applications.
The only field which should be used by app is opaque_data.
This field can now be accessed via set/get APIs added in this
patch.
Subsequent changes in app and lib are made to compile the code.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Kai Ji <kai.ji@intel.com>
Tested-by: Gagandeep Singh <g.singh@nxp.com>
Tested-by: David Coyle <david.coyle@intel.com>
Tested-by: Kevin O'Sullivan <kevin.osullivan@intel.com>
This function was never implemented and has been deprecated for a long
time. We can remove it.
Signed-off-by: David Marchand <david.marchand@redhat.com>
As part of the agreed process for deprecating KNI in DPDK, the example
app is scheduled for removal as part of the 22.11 release.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
NVIDIA acquired Mellanox Technologies in 2020.
The DPDK documentation and code might still include instances
of or references to Mellanox trademarks (like BlueField and ConnectX)
that are now NVIDIA trademarks.
The PCI IDs and copyrights are unchanged.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Gal Cohen <galco@nvidia.com>
Introduce ability to aggregate crypto operations processed by event
crypto adapter into single event containing rte_event_vector whose event
type is RTE_EVENT_TYPE_CRYPTODEV_VECTOR.
Application should set RTE_EVENT_CRYPTO_ADAPTER_EVENT_VECTOR in
rte_event_crypto_adapter_queue_conf::flag and provide vector configuration
with respect of rte_event_crypto_adapter_vector_limits, which could be
obtained by calling rte_event_crypto_adapter_vector_limits_get, to enable
vectorization.
The event crypto adapter would be responsible for vectorizing the crypto
operations based on provided response information in
rte_event_crypto_metadata::response_info.
Updated drivers and tests accordingly to new API.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
ShangMi 3 (SM3) is a cryptographic hash function used in
the Chinese National Standard.
- Added SM3 algorithm
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Kai Ji <kai.ji@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
ShangMi 4 (SM4) is a block cipher used in the
Chinese National Standard for Wireless LAN WAPI and also
used with Transport Layer Security.
Added SM4 encryption algorithm in ECB, CBC and CTR modes.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Kai Ji <kai.ji@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The API rte_security_get_userdata() was being unused by most of
the drivers and it was retrieving userdata from mbuf dynamic field.
Hence, the API was removed and the application can directly get the
userdata from dynamic field. This helps in removing extra checks
in datapath.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
DPDK libraries should never call rte_exit on failure, so change the
function return type of rte_metrics_init to "int" to allow returning an
error code to the application rather than exiting the whole app on init
failure.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Library functions should not cause the app to exit or panic. Replace the
existing panic call in the EAL remote launch functions with an error
code return instead.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Deprecation notice targeted for v22.11 of event vector has been
merged in the following commits, remove deprecation notices.
Fixes: 0fbb55efa5 ("eventdev: add element offset to event vector")
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Replace *u64s with u64s in rte_event_vector structure as
the *ptrs already serves the purpose of holding pointers
and the intention of u64s is to hold array of uint64_t
values.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add `rte` prefix to stop flush callback function pointer
declaration to avoid conflicts with application functions,
``eventdev_stop_flush_t`` is renamed to
``rte_eventdev_stop_flush_t``.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
For best performance, applications running on certain cores should use
the DLB device locally available on the same tile along with other
resources. To allocate optimal resources, probing is done for each
producer port (PP) for a given CPU and the best performing ports are
allocated to producers. The CPU used for probing is either the first
core of producer coremask (if present) or the second core of EAL
coremask. This will be extended later to probe for all CPUs in the
producer coremask or EAL coremask.
Producer coremask can be passed along with the BDF of the DLB devices.
"-a xx:y.z,producer_coremask=<core_mask>"
Applications also need to pass RTE_EVENT_PORT_CFG_HINT_PRODUCER during
rte_event_port_setup() for producer ports for optimal port allocation.
For optimal load balancing ports that map to one or more QIDs in common
should not be in numerical sequence. The port->QID mapping is application
dependent, but the driver interleaves port IDs as much as possible to
reduce the likelihood of sequential ports mapping to the same QID(s).
Hence, DLB uses an initial allocation of Port IDs to maximize the
average distance between an ID and its immediate neighbors. Using
the initialport allocation option can be passed through devarg
"default_port_allocation=y(or Y)".
When events are dropped by workers or consumers that use LDB ports,
completions are sent which are just ENQs and may impact the latency.
To address this, probing is done for LDB ports as well. Probing is
done on ports per 'cos'. When default cos is used, ports will be
allocated from best ports from the best 'cos', else from best ports of
the specific cos.
Signed-off-by: Abdullah Sevincer <abdullah.sevincer@intel.com>
As rte_flow_action_handle_create/destroy/update() have their own
asynchronous rte_flow_async_action_handle_create/destroy/update()
version functions to accelerate the indirect action operations in
queue based flow engine. Currently, the asynchronous version query
function for indirect action was missing.
Add rte_flow_async_action_handle_query() function corresponding
to rte_flow_action_handle_query(). The new asynchronous version
function enables enqueue the query to the hardware similar as
asynchronous flow management does and returns immediately to free
the CPU for other tasks. Application can get the query results from
rte_flow_pull() when the hardware completes its work.
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
In queue based async flow engine, in order to optimize the flow
insertion rate, PMD can use the hints from application to have
resources pre-allocate during initialization phase for actions
such as count/meter/aging.
This commit adds the connection tracking action hints.
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
If there's no param in represented_port item, it will be treated as
matching all ports by default. But there's some limitation when using it
with meter hierarchy.
This patch adds the limitation that when matching all ports, the meter
hierarchy should not contain any meter having drop count.
Fixes: e8146c63 ("net/mlx5: support represented port item in flow rules")
Cc: stable@dpdk.org
Signed-off-by: Shun Hao <shunh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
In case of higher order (greater than 99) logical cores, name was
truncated (length is restricted to 16 characters, including the
terminating null byte ('\0')) and it makes hard to follow threads.
Before this fix, this issue can be reproduced using following arguments:
--lcores=0,10@1,100@2
Then we had:
lcore-worker-10
lcore-worker-10
Signed-off-by: Abdullah Ömer Yamaç <omer.yamac@ceng.metu.edu.tr>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Those helpers have been marked as deprecated for a long time and have
documented equivalent helpers.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
This patch is to enable scalar path inner and outer Tx checksum offload
for tunnel packet by configure ol_flags.
Signed-off-by: Peng Zhang <peng1x.zhang@intel.com>
Signed-off-by: Zhichao Zeng <zhichaox.zeng@intel.com>
Tested-by: Ke Xu <ke1.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add a known issue: configuring VLAN filters from VF is unsupported
for i40e driver 2.17.15.
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Move all VF related limitation or known issues from i40e.rst to
intel_vf.rst, as i40evf has been removed from i40e, i40e.rst should only
cover PF's information.
The patch also fix couple typos and refine the words to be more accurate.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add support for sending traffic to the original DCF port
with 'port_representor' action by using DCF port id as 'port_id'.
For example:
testpmd> flow create 0 ingress pattern any
/ end actions port_representor port_id 0 / end
Signed-off-by: Zhichao Zeng <zhichaox.zeng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add flow subscription pattern support for AVF.
The supported patterns are listed below:
eth/vlan/ipv4
eth/ipv4(6)
eth/ipv4(6)/udp
eth/ipv4(6)/tcp
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The ice has the feature to extract protocol fields into flex descriptor
by programming per queue. However, the dynamic field for proto_ext are
allocated by PMD, it is the responsibility of application to reserved
the field, before start DPDK.
Application with parse the offset and proto_ext name to PMD with devargs.
Remove related private API in 'rte_pmd_ice.h' and 'rte_pmd_ice.h' file.
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Tested-by: Jin Ling <jin.ling@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Support disabling DCF ACL engine via devarg "acl=off" in cmdline, aiming to
shorten the DCF startup time.
Signed-off-by: Zhichao Zeng <zhichaox.zeng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
According to the ABI and API Deprecation, remove deprecated VF action
as hard-to-use / ambiguous.
Action REPRESENTED_PORT should be used instead.
Signed-off-by: Zhichao Zeng <zhichaox.zeng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add support for action REPRESENTED_PORT in DCF. Supposed to send matching
traffic to the entity (VF) represented by the given ethdev, at embedded
switch level.
Signed-off-by: Zhichao Zeng <zhichaox.zeng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Added support for MACsec in rte_security for offloading
MACsec Protocol operation to inline NIC device or a crypto device.
To support MACsec we cannot just make one security session and
send with the packet to process it. MACsec specifications suggest,
it has 3 different entities - SECY Entity, SC (secure channel) and
SA (security association). And same SA can be used by multiple SCs and
similarly many SECY can have same SCs. Hence, in order to support this
many to one relationships between all entities, 2 new APIs are created -
rte_security_macsec_sc_create and rte_security_macsec_sa_create.
Flow of execution of the APIs would be as
- rte_security_macsec_sa_create
- rte_security_macsec_sc_create
- rte_security_session_create (for secy)
And in case of inline protocol processing rte_flow can be created with
rte_security action. A new flow item will be added for MACsec header.
New APIs are also created for getting SC and SA stats.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Add support to start or stop a particular queue
that is associated with the adapter.
Start function enables the Tx adapter to start enqueueing
packets to the Tx queue.
Stop function stops the Tx adapter from enqueueing any
packets to the Tx queue. The stop API also frees any packets
that may have been buffered for this queue. All in-flight packets
destined to the queue are freed by the adapter runtime until the
queue is started again.
Signed-off-by: Naga Harish K S V <s.v.naga.harish.k@intel.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Removed support to limit XAQ from devargs. If XAQ is limited, new add
works could run out of XAQ entries and disable the queue.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
The ioat driver has been superseded by the ioat and idxd dmadev drivers,
and has been deprecated for some time, so remove it.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Clarify that for Outbound Inline IPsec processing, L2 header
needs to be up to date with ether type which will be applicable
post IPsec processing as the IPsec offload only touches L3 and above.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Clarify mbuf meta data needed for Outbound Inline IPsec processing.
Application needs to provide mbuf.l3_len and L3 type in
mbuf.ol_flags so that like tunnel mode using mbuf.l2_len, transport mode
can make use of l3_len and l3_type to determine perform
proper transport mode IPsec processing.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add support for offloading RTE_CRYPTO_CIPHER_AES_DOCSISBPI and
RTE_CRYPTO_CIPHER_DES_DOCSISBPI algorithms to symmetric crypto session.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Arm port of ipsec_mb library [1] has different header file name than
the Intel ipsec_mb library. Proper header name is picked according to
the architecture to get the code compile when ipsec_mb is installed on
Arm platform.
And the Arm port currently supports ZUC and SNOW3g. Call to other
algorithms will be blocked.
[1] https://gitlab.arm.com/arm-reference-solutions/ipsec-mb/-/tree/main
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Ashwin Sekhar T K <asekhar@marvell.com>
Added new fields to represent event queue weight and affinity in
rte_event_queue_conf structure. Internal op to get queue attribute is
removed as it is no longer needed. Updated driver to use the new field.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
