Currently, when we set the acpi governor to "userspace", we check if
it is already set to this value, and if it is, we skip setting it.
However, we never save this value anywhere, so that next time we come
back and request the governor to be set to its original value, the
original value is empty.
Fix it by saving the original pstate governor first. While we're at it,
replace `strlcpy` with `rte_strscpy`.
Fixes: 445c6528b5 ("power: common interface for guest and host")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
In function 'eval_jcc', judgment 'op == EBPF_JLT' occurs
twice, as a result, the corresponding second statement
cannot be accessed.
This patch fix this problem.
Fixes: 8021917293 ("bpf: add extra validation for input BPF program")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
gcc 11 with '-O2' complains about some variables being used without
being initialized:
In function ‘start_flow_avx512x8’,
inlined from ‘search_trie_avx512x8.constprop’ at acl_run_avx512_common.h:317:
lib/librte_acl/acl_run_avx512_common.h:210:13: warning:
‘pdata’ is used uninitialized [-Wuninitialized]
In function ‘search_trie_avx512x8.constprop’:
lib/librte_acl/acl_run_avx512_common.h:314:32: note: ‘pdata’ declared here
...
Indeed, these variables are not explicitly initialized,
but this is done intentionally.
We rely on constant mask value that we pass to start_flow*() functions
as a parameter to mask out uninitialized values.
Note that '-O3' doesn't produce this warning.
Anyway, to support clean build with gcc-11 this patch adds
explicit initialization for these variables.
I checked the output binary: with '-O3' both clang and gcc 10/11
generate no extra code for it.
Also performance test didn't reveal any regressions.
Bugzilla ID: 673
Fixes: b64c2295f7 ("acl: add 256-bit AVX512 classify method")
Fixes: 45da22e42e ("acl: add 512-bit AVX512 classify method")
Cc: stable@dpdk.org
Reported-by: Ali Alnubani <alialnu@nvidia.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch fixes the issue that epoll_events memory is not released
after the intr thread created fail.
Fixes: 3810ae4357 ("eventdev: add interrupt driven queues to Rx adapter")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The thread name already set by rte_ctrl_thread_create() API, so remove
the call of rte_thread_setname() API.
Fixes: 3810ae4357 ("eventdev: add interrupt driven queues to Rx adapter")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Clarify that the mempool private initializer and object initializer used
for packet pools require that the mempool private size is large enough.
Also add an assert (only enabled when -DRTE_ENABLE_ASSERT is passed) to
check this constraint.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Because mbuf dyn shared memory was allocated runtime, so it's
necessary to check validity when dump mbuf dyn info.
Also this patch adds an error logging when init shared memory fail.
Fixes: 4958ca3a44 ("mbuf: support dynamic fields and flags")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
the strncasecmp macro defined in rte_os_shim.h is already
defined in MinGW-w64, as a result the compiler prints out
the warning below on function redefinition whenever compiling
a file including the header in debug mode.
lib/eal/windows/include/rte_os_shim.h:21:
warning: "strncasecmp" redefined
Fixed by defining the macro only to the clang compiler.
Fixes: 45d62067c2 ("eal: make OS shims internal")
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
REG_PLATFORM only uses bit 0 to indicate whether the value retrieved
from hardware matches PLATFORM_STR.
Fixes: 97523f822b ("eal/arm: add CPU flags for ARMv8")
Cc: stable@dpdk.org
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Running "./devtools/check-meson.py --fix" on the DPDK repo fixes a
number of issues with whitespace and formatting of files:
* indentation of lists
* missing trailing commas on final list element
* multiple list entries per line when list is not all single-line
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
If cache is enabled, objects will be retrieved/put from/to cache,
subsequently from/to the common pool. Now the debug stats calculate
the objects retrieved/put from/to cache and pool together, it is
better to distinguish them.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Since commit 7911ba0473 ("stack: enable lock-free implementation for
aarch64"), lock-free stack is supported on arm64 but this description was
missing from the doxygen for the flag.
Currently it is impossible to detect programmatically whether lock-free
implementation of rte_stack is supported. One could check whether the
header guard for lock-free stubs is defined (_RTE_STACK_LF_STUBS_H_) but
that's an unstable implementation detail. Because of that currently all
lock-free ring creations silently succeed (as long as the stack header
is 16B long) which later leads to push and pop operations being NOPs.
The observable effect is that stack_lf_autotest fails on platforms not
supporting the lock-free. Instead it should just skip the lock-free test
altogether.
This commit adds a new errno value (ENOTSUP) that may be returned by
rte_stack_create() to indicate that a given combination of flags is not
supported on a current platform.
This is detected by checking a compile-time flag in the include logic in
rte_stack_lf.h which may be used by applications to check the lock-free
support at compile time.
Use the added RTE_STACK_LF_SUPPORTED flag to disable the lock-free stack
tests at the compile time.
Perf test doesn't fail because rte_ring_create() succeeds, however
marking this test as skipped gives a better indication of what actually
was tested.
Fixes: 7911ba0473 ("stack: enable lock-free implementation for aarch64")
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
PKT_RX_EIP_CKSUM_BAD has been declared deprecated but there was no
warning to applications still using it.
Fix this by marking as deprecated with the newly introduced
RTE_DEPRECATED.
Fixes: e8a419d6de ("mbuf: rename outer IP checksum macro")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Flavio Leitner <fbl@sysclose.org>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Lance Richardson <lance.richardson@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
C11 timespec_get() is not provided on some platforms:
* MinGW-w64 does not currently implement it [1].
* FreeBSD 11 with Clang 10.0.0 does not provide it.
Add internal shims to Windows and FreeBSD EALs.
For Windows, it can be removed after [1] is fixed.
[1]: https://sourceforge.net/p/mingw-w64/mailman/message/37224689/
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Nick Connolly <nick.connolly@mayadata.io>
This patch adds more sanity checks in control path APIs.
Fixes: 214ed1acd1 ("ethdev: add iterator to match devargs input")
Fixes: 3d98f921fb ("ethdev: unify prefix for static functions and variables")
Fixes: 0366137722 ("ethdev: check for invalid device name")
Fixes: d948f596fe ("ethdev: fix port data mismatched in multiple process model")
Fixes: 5b7ba31148 ("ethdev: add port ownership")
Fixes: f8244c6399 ("ethdev: increase port id range")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Currently, the flow meter policy does not support multiple actions
per color; also the allowed action types per color are very limited.
In addition, the policy cannot be pre-defined.
Due to the growing in flow actions offload abilities there is a potential
for the user to use variety of actions per color differently.
This new meter policy API comes to allow this potential in the most ethdev
common way using rte_flow action definition.
A list of rte_flow actions will be provided by the user per color
in order to create a meter policy.
In addition, the API forces to pre-define the policy before
the meters creation in order to allow sharing of single policy
with multiple meters efficiently.
meter_policy_id is added into struct rte_mtr_params.
So that it can get the policy during the meters creation.
Allow coloring the packet using a new rte_flow_action_color
as could be done by the old policy API.
Add two common policy template as macros in the head file.
The next API function were added:
- rte_mtr_meter_policy_add
- rte_mtr_meter_policy_delete
- rte_mtr_meter_policy_update
- rte_mtr_meter_policy_validate
The next struct was changed:
- rte_mtr_params
- rte_mtr_capabilities
The next API was deleted:
- rte_mtr_policer_actions_update
To support this API the following app were changed:
app/test-flow-perf: clean meter policer
app/testpmd: clean meter policer
To support this API the following drivers were changed:
net/softnic: support meter policy API
1. Cleans meter rte_mtr_policer_action.
2. Supports policy API to get color action as policer action did.
The color action will be mapped into rte_table_action_policer.
net/mlx5: clean meter creation management
Cleans and breaks part of the current meter management
in order to allow better design with policy API.
Signed-off-by: Li Zhang <lizh@nvidia.com>
Signed-off-by: Haifei Luo <haifeil@nvidia.com>
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This commit introduces the conntrack action and item.
Usually the HW offloading is stateless. For some stateful offloading
like a TCP connection, HW module will help provide the ability of a
full offloading w/o SW participation after the connection was
established.
The basic usage is that in the first flow rule the application should
add the conntrack action and jump to the next flow table. In the
following flow rule(s) of the next table, the application should use
the conntrack item to match on the result.
A TCP connection has two directions traffic. To set a conntrack
action context correctly, the information of packets from both
directions are required.
The conntrack action should be created on one ethdev port and supply
the peer ethdev port as a parameter to the action. After context
created, it could only be used between these two ethdev ports
(dual-port mode) or a single port. The application should modify the
action via the API "rte_action_handle_update" only when before using
it to create a flow rule with conntrack for the opposite direction.
This will help the driver to recognize the direction of the flow to
be created, especially in the single-port mode, in which case the
traffic from both directions will go through the same ethdev port
if the application works as an "forwarding engine" but not an end
point. There is no need to call the update interface if the
subsequent flow rules have nothing to be changed.
Query will be supported via "rte_action_handle_query" interface,
about the current packets information and connection status. The
fields query capabilities depends on the HW.
For the packets received during the conntrack setup, it is suggested
to re-inject the packets in order to make sure the conntrack module
works correctly without missing any packet. Only the valid packets
should pass the conntrack, packets with invalid TCP information,
like out of window, or with invalid header, like malformed, should
not pass.
Naming and definition:
https://elixir.bootlin.com/linux/latest/source/include/uapi/linux/
netfilter/nf_conntrack_tcp.h
https://elixir.bootlin.com/linux/latest/source/net/netfilter/
nf_conntrack_proto_tcp.c
Other reference:
https://www.usenix.org/legacy/events/sec01/invitedtalks/rooij.pdf
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Currently, DPDK application can offload the checksum check,
and report it in the mbuf.
However, as more and more applications are offloading some or all
logic and action to the HW, there is a need to check the packet
integrity so the right decision can be taken.
The application logic can be positive meaning if the packet is
valid jump / do actions, or negative if packet is not valid
jump to SW / do actions (like drop) and add default flow
(match all in low priority) that will direct the miss packet
to the miss path.
Since currently rte_flow works in positive way the assumption is
that the positive way will be the common way in this case also.
When thinking what is the best API to implement such feature,
we need to consider the following (in no specific order):
1. API breakage.
2. Simplicity.
3. Performance.
4. HW capabilities.
5. rte_flow limitation.
6. Flexibility.
First option: Add integrity flags to each of the items.
For example add checksum_ok to IPv4 item.
Pros:
1. No new rte_flow item.
2. Simple in the way that on each item the app can see
what checks are available.
Cons:
1. API breakage.
2. Increase number of flows, since app can't add global rule and must
have dedicated flow for each of the flow combinations, for example
matching on ICMP traffic or UDP/TCP traffic with IPv4 / IPv6 will
result in 5 flows.
Second option: dedicated item
Pros:
1. No API breakage, and there will be no for some time due to having
extra space. (by using bits)
2. Just one flow to support the ICMP or UDP/TCP traffic with IPv4 /
IPv6.
3. Simplicity application can just look at one place to see all possible
checks.
4. Allow future support for more tests.
Cons:
1. New item, that holds number of fields from different items.
For starter the following bits are suggested:
1. packet_ok - means that all HW checks depending on packet layer have
passed. This may mean that in some HW such flow should be split to
number of flows or fail.
2. l2_ok - all check for layer 2 have passed.
3. l3_ok - all check for layer 3 have passed. If packet doesn't have
L3 layer this check should fail.
4. l4_ok - all check for layer 4 have passed. If packet doesn't
have L4 layer this check should fail.
5. l2_crc_ok - the layer 2 CRC is O.K.
6. ipv4_csum_ok - IPv4 checksum is O.K. It is possible that the
IPv4 checksum will be O.K. but the l3_ok will be 0. It is not
possible that checksum will be 0 and the l3_ok will be 1.
7. l4_csum_ok - layer 4 checksum is O.K.
8. l3_len_OK - check that the reported layer 3 length is smaller than the
frame length.
Example of usage:
1. Check packets from all possible layers for integrity.
flow create integrity spec packet_ok = 1 mask packet_ok = 1 .....
2. Check only packet with layer 4 (UDP / TCP)
flow create integrity spec l3_ok = 1, l4_ok = 1 mask l3_ok = 1
l4_ok = 1
Signed-off-by: Ori Kam <orika@nvidia.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Right now, rte_flow_shared_action_* APIs are used for some shared
actions, like RSS, count. The shared action should be created before
using it inside a flow. These shared actions sometimes are not
really shared but just some indirect actions decoupled from a flow.
The new functions rte_flow_action_handle_* are added to replace
the current shared functions rte_flow_shared_action_*.
There are two types of flow actions:
1. the direct (normal) actions that could be created and stored
within a flow rule. Such action is tied to its flow rule and
cannot be reused.
2. the indirect action, in the past, named shared_action. It is
created from a direct actioni, like count or rss, and then used
in the flow rules with an object handle. The PMD will take care
of the retrieve from indirect action to the direct action
when it is referenced.
The indirect action is accessed (update / query) w/o any flow rule,
just via the action object handle. For example, when querying or
resetting a counter, it could be done out of any flow using this
counter, but only the handle of the counter action object is
required.
The indirect action object could be shared by different flows or
used by a single flow, depending on the direct action type and
the real-life requirements.
The handle of an indirect action object is opaque and defined in
each driver and possibly different per direct action type.
The old name "shared" is improper in a sense and should be replaced.
Since the APIs are changed from "rte_flow_shared_action*" to the new
"rte_flow_action_handle*", the testpmd application code and command
line interfaces also need to be updated to do the adaption.
The testpmd application user guide is also updated. All the "shared
action" related parts are replaced with "indirect action" to have a
correct explanation.
The parameter of "update" interface is also changed. A general
pointer will replace the rte_flow_action struct pointer due to the
facts:
1. Some action may not support fields updating. In the example of a
counter, the only "update" supported should be the reset. So
passing a rte_flow_action struct pointer is meaningless and
there is even no such corresponding action struct. What's more,
if more than one operations should be supported, for some other
action, such pointer parameter may not meet the need.
2. Some action may need conditional or partial update, the current
parameter will not provide the ability to indicate which part(s)
to update.
For different types of indirect action objects, the pointer could
either be the same of rte_flow_action* struct - in order not to
break the current driver implementation, or some wrapper
structures with bits as masks to indicate which part to be
updated, depending on real needs of the corresponding direct
action. For different direct actions, the structures of indirect
action objects updating will be different.
All the underlayer PMD callbacks will be moved to these new APIs.
The RTE_FLOW_ACTION_TYPE_SHARED is kept for now in order not to
break the ABI. All the implementations are changed by using
RTE_FLOW_ACTION_TYPE_INDIRECT.
Since the APIs are changed from "rte_flow_shared_action*" to the new
"rte_flow_action_handle*" and the "update" interface's 3rd input
parameter is changed to generic pointer, the mlx5 PMD that uses these
APIs needs to do the adaption to the new APIs as well.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Andrey Vesnovaty <andreyv@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Currently, upper-layer application could get queue state only
through pointers such as dev->data->tx_queue_state[queue_id],
this is not the recommended way to access it. So this patch
add get queue state when call rte_eth_rx_queue_info_get and
rte_eth_tx_queue_info_get API.
Note: After add queue_state field, the 'struct rte_eth_rxq_info' size
remains 128B, and the 'struct rte_eth_txq_info' size remains 64B, so
it could be ABI compatible.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The function pthread_setname_np() was originally not available on
FreeBSD. It has been added in FreeBSD 12.2:
https://svnweb.freebsd.org/base?view=revision&revision=362264
The EAL implementation of rte_thread_setname() is duplicated
in the telemetry library, which does not depend on EAL,
so the compilation is safe in all systems.
Fixes: 5da7736f8c ("telemetry: set socket listener thread name")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
This patch fixes the traffic class oversubscription watermark
value by initialising it with computed value of maximum watermark.
Fixes: ac6fcb841b ("sched: update subport rate dynamically")
Cc: stable@dpdk.org
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
When fragmenting IPv4 packet, the data offset should be calculated through
the IHL field in IP header rather than using sizeof(struct rte_ipv4_hdr).
Fixes: 4c38e5532a ("ip_frag: refactor IPv4 fragmentation into a proper library")
Cc: stable@dpdk.org
Signed-off-by: Pu Xu <583493798@qq.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add result check and message print out for thread creation after
failure.
Fixes: b80fe1805e ("telemetry: introduce backward compatibility")
Fixes: 6dd571fd07 ("telemetry: introduce new functionality")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Ciara Power <ciara.power@intel.com>
This patch supports set init threads name which is helpful for
debugging.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add support for the disable_libs option, to allow disabling the build of
particular libraries. As part of this, maintain a list of what libraries
can safely be disabled, without breaking the build - for now this list is
solely those libraries which are not built on FreeBSD, kni, power and
vhost. This list can be expanded by future patches.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
There is no reason for the DPDK libraries to all have 'librte_' prefix on
the directory names. This prefix makes the directory names longer and also
makes it awkward to add features referring to individual libraries in the
build - should the lib names be specified with or without the prefix.
Therefore, we can just remove the library prefix and use the library's
unique name as the directory name, i.e. 'eal' rather than 'librte_eal'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Switch from using tabs to 4 spaces for meson.build indentation. Perform
other formatting cleanups such as ensure that long lists of files are one
per line, and terminating with a final comma before the closing brace to
make addition/removals easier. In some cases, reorder lists of items
where they were not in alphabetical order.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
With the lib/meson.build file changed from C-style indentation to
python-style indentation, we need to correct the indentation of the lists
of libraries, since these libs were not modified in the previous patches.
For ease of management of the list and working with patches for adding
to the list, put each library on it's own line.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Two simplifications can be made to the build file which reduce indentation
levels and make it easier to read:
1. When meson build support was first added, the compat library existed in
DPDK as a single header file. Since that header has been merged into EAL,
we no longer need to support header-only libraries, so can shorten the
code.
2. From meson 0.49 onwards we have the "continue" keyword available to
break out of one loop iteration and begin the next. This allows us to
remove blocks in the build configuration file which were conditional on the
"build" variable being true. Instead we can use "continue" to abort
processing at the point where the "build" value becomes false.
Since this patch changes the indentation level of large parts of the
meson.build file, we use the opportunity to adjust the whitespace used to
the meson-standard 4-spec indentation level.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Compilation on CentOS 7 with gcc version 4.8.5 fails with
the following errors:
error: 'src_struct_id' may be used uninitialized in this
function [-Werror=maybe-uninitialized]
error: 'dst_struct_id' may be used uninitialized in this
function [-Werror=maybe-uninitialized]
This patch fixes the build errors by initializing both variables.
Bugzilla ID: 683
Fixes: 783768136f ("pipeline: auto-detect endianness of action arguments")
Signed-off-by: Ali Alnubani <alialnu@nvidia.com>
Adding async userspace requests which don't wait for the userspace
response and always return success. This is preparation to address a
regression in KNI.
Signed-off-by: Elad Nachman <eladv6@gmail.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
In case of EAL initialization failure rte_eal_memory_detach() may be
called before mapping memory configuration, which in this case points
to the static structure. Attempt to unmap it yields error:
EAL: Could not unmap shared memory config: Invalid argument
Skip unmapping memory configuration if it's not yet shared.
Fixes: dfbc61a2f9 ("mem: detach memsegs on cleanup")
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This patch adds predictable RSS API.
It is based on the idea of searching partial Toeplitz hash collisions.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Yipeng Wang <yipeng1.wang@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Each table entry is made up of match fields and action data, with the
latter made up of the action ID and the action arguments. The approach
of having the user specify explicitly the endianness of the action
arguments is difficult to be picked up by P4 compilers, as the P4
compiler is generally unaware about this aspect.
This commit introduces the auto-detection of the endianness of the
action arguments by examining the endianness of the their destination:
network byte order (NBO) when they get copied to headers and host byte
order (HBO) when they get copied to packet meta-data or mailboxes.
The endianness specification of each action argument as part of the
rule specification, e.g. H(...) and N(...) is removed from the rule
file and auto-detected based on their destination. The DMA instruction
scope is made internal, so mov instructions need to be used. The
pattern of transferring complete headers from table entry action args
to headers is detected, and the associated set of mov instructions
plus header validate is internally detected and replaced with the
internal-only DMA instruction to preserve performance.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Decouple between the different instruction optimizer. Allow each
optimization to run as a separate iteration on the entire instruction
stream.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The SWX pipeline instructions work with operands of different types:
header fields (h.header.field), packet meta-data (m.field), extern
object mailbox field (e.obj.field), extern function (f.field), action
data read from table entries (t.field), or immediate values; hence the
HMEFTI acronym. The H operands are stored in network byte order (NBO),
while the MEFT operands are stored in host byte order (HBO), hence the
need to operate endianness conversions.
Some of the endianness conversion macros were not working correctly
for some cases such as operands of different sizes, and they are fixed
now. Affected instructions: mov, and, or, xor, jmpeq, jmpneq.
Fixes: 7210349d5b ("pipeline: add SWX move instruction")
Fixes: 650195cf96 ("pipeline: introduce SWX and instruction")
Fixes: 8f796198dc ("pipeline: introduce SWX or instruction")
Fixes: b4e607f9fd ("pipeline: introduce SWX XOR instruction")
Fixes: b3947e25be ("pipeline: introduce SWX jump and return instructions")
Cc: stable@dpdk.org
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Adjusting the error code for the internal function instruction_config
to match the rest of the code which is returning a negative value on
error. Cosmetic change.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Enhance the behavior of the emit instruction to ignore invalid
headers, as mandated by the P4 language specification.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add support for table statistics for the SWX pipeline. For each table,
we maintain a counter for lookup hit packets, one for lookup miss
packets and one packet counter for each table action.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Yogesh Jangra <yogesh.jangra@intel.com>
Enabled the TX instruction to accept an immediate value for the output
port argument. The drop instruction is simply an alias to the TX
instruction for the last output port of the pipeline.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The match fields for a given table have to be part of the same header
or the metadata structure. This commit removes the requirement that
the list of match fields must observe the order of fields within their
structure. For example, the h.ipv4.dst_addr field can now be listed
before the h.ipv4.src_addr field in a table match field list, even
though within the IPv4 header the dst_addr field is present after the
src_addr field.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Currently, the table entry action data is required to be NULL when the
action data size is zero. We now require that action data is ignored
when the action data size is zero. This is to allow for a table entry
instance to be allocated once with max action data size for the table
and reused repeatedly for actions of different sizes, including zero.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Churchill Khangar <churchill.khangar@intel.com>
When inserting devargs that is already in list,
existing one was reset and replaced completely by new one,
the entry info was lost during copy.
This patch backups entry info before copy.
Fixes: 64051bb1f1 ("devargs: unify scratch buffer storage")
Reported-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Currently, new user mem maps are checked if they are adjacent to
an existing mem map and if so, the mem map entries are merged.
It didn't check for duplicate mem maps, so if the API is called
with the same mem map multiple times, they will occupy multiple
mem map entries. This will reduce the amount of entries available
for unique mem maps.
So check for duplicate mem maps and merge them into one mem map
entry if any found.
Fixes: 0cbce3a167 ("vfio: skip DMA map failure if already mapped")
Cc: stable@dpdk.org
Suggested-by: Kevin Traynor <ktraynor@redhat.com>
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Use UINT64_MAX instead of -1ULL.
Some compilers generate a warning when applying a '-' to
an unsigned literal so avoid this by initializing with
unsigned preprocessor definition.
Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Use UINT64_MAX and UINT32_MAX instead of -1 or ~0 literal variations
of different explicit widths when creating masks and sentinel values.
Some compilers generate a warning when applying a '-' to an unsigned
literal so avoid this by initializing with unsigned preprocessor
definitions where appropriate.
Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
