The value of offload VIRTCHNL_VF_OFFLOAD_CRC bit already existed as
VIRTCHNL_VF_CAP_ADV_LINK_SPEED. Fix this now by changing the value of
VIRTCHNL_VF_OFFLOAD_CRC to a currently unused value.
Also, move the define for VIRTCHNL_VF_CAP_ADV_LINK_SPEED in the correct
place to line up with the other bit values and add a comment for its
purpose. Hopefully this will prevent from defining duplicate bits moving
forward.
Fixes: e244eeafce ("net/iavf/base: update virtual channel")
Cc: stable@dpdk.org
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Input set has been divided into inner and outer part to distinguish
different fields. However, the parse method of switch filter doesn't
match this update. Refactor switch filter to distinguish inner and outer
input set in the same way as other filters.
Signed-off-by: Yuying Zhang <yuying.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The input set has been divided into two parts to distinguish
inner and outer field. ICE_INSET_TUN_* is the same as non tunnel
macro definition. Clean redundant ICE_INSET_TUN_* codes.
Signed-off-by: Yuying Zhang <yuying.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When the command sent by VF to PF fails, iavf may need to run
different code paths according to the specific reason of the
failure (not supported or other reasons).
This patch adds support of identifying PF return error type.
Fixes: 22b123a36d ("net/avf: initialize PMD")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
When the default RSS is disabled during initialization, the RSS should
be turned on when creating RSS rule.
This patch adds support to configure RSS key and lookup table even
when the default RSS is disabled.
Fixes: c678299594 ("net/iavf: fix default RSS configuration")
Cc: stable@dpdk.org
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
MBUF_FAST_FREE should be supported as per queue offload for ice.
Fixes: 6eac0b7fde ("net/ice: support advance Rx/Tx")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The iavf does not support configuring RSS type on i40e VF,
because the i40e kernel driver does not support
VIRTCHNL_VF_OFFLOAD_ADV_RSS_PF capability.
This patch adds support of RSS type configuration for i40e VF by
sending VIRTCHNL_OP_SET_RSS_HENA message to the PF after checking
that the PF does not support VIRTCHNL_VF_OFFLOAD_ADV_RSS_PF
capability.
Fixes: c678299594 ("net/iavf: fix default RSS configuration")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Added two virtchnl protocol header types for L2TPv2 and PPP to support
the RSS hash for PPPoL2TPv2oUDP.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The VSI pointer is always valid, so there is no need to judge its
validity.
Fixes: b6583ee402 ("i40e: full VMDQ pools support")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds check for negative VEB index when parsing VEB list.
Fixes: 79f2248219 ("net/i40e: add floating VEB option")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In function efx_pci_xilinx_cap_tbl_find, pointer entry_offsetp is used
before null pointer check, which may cause access to null pointer.
This patch fix this problem.
Fixes: ba9568b8b4 ("common/sfc_efx/base: add Xilinx capabilities table lookup")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The link fails code should be parsed using the structure
hns3_mbx_vf_to_pf_cmd, else it will parse fail.
Fixes: 109e4dd1bd ("net/hns3: get link state change through mailbox")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
The socket ID entered by user is cast to an unsigned integer. However,
the value may be an illegal negative value, which may cause some
problems. In this case, an error should be returned.
In addition, the socket ID may be an invalid positive number, which is
also processed in this patch.
Fixes: 2efb58cbab ("bond: new link bonding library")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The --txpkts command line parameter was silently ignored due to
application was unable to check the Tx queue ring sizes for non
configured ports.
The "set txpkts <len0[,len1]*>" was also rejected if there
was some stopped or /unconfigured port.
This provides the following:
- If fails to get ring size from the port, this can be because port is
not initialized yet, ignore the check and just be sure segment size
won't cause an out of bound access. The port descriptor check will
be done during Tx setup.
- The capability to send single packet is supposed to be very basic
and always supported, the setting segment number to 1 is always
allowed, no check performed
- At the moment of Tx queue setup the descriptor number is checked
against configured segment number
Bugzilla ID: 584
Fixes: 8dae835d88 ("app/testpmd: remove restriction on Tx segments set")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Disable the MAC status report interrupt which hns3 driver not concern
currently.
Fixes: 5f8845f4ba ("net/hns3: process MAC interrupt")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
This patch added examples for runtime config options, to help user
how to use this.
Fixes: a124f9e959 ("net/hns3: add runtime config to select IO burst function")
Fixes: 7079121324 ("net/hns3: support masking device capability")
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
This patch fixed wrong word in comments.
Fixes: f53a793bb7 ("net/hns3: add more hardware error types")
Fixes: d51867db65 ("net/hns3: add initialization")
Fixes: 411d23b9ea ("net/hns3: support VLAN")
Fixes: 5f8845f4ba ("net/hns3: process MAC interrupt")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
The size of the current interrupt vector array is fixed to an integer.
This patch will create an interrupt vector array based on the number
of rxqs.
Fixes: 4870a8cdd9 ("net/tap: support Rx interrupt")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When txq offload is configured, max rxq is used as the max queue. This
patch fixes it.
Fixes: 74453ac9ef ("app/testpmd: fix queue offload configuration")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Return value 'rte_kni_init' of a function is not checked. If
it fails, error handling (logging and return) should be done.
This patch fixed it.
Fixes: 0c6bc8ef70 ("kni: memzone pool for alloc and release")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch changed 'subsytem' to 'subsystem'.
Fixes: 0c6bc8ef70 ("kni: memzone pool for alloc and release")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
If the bond device was created by vdev mode, the kvlist was not free
when the bond device removed.
Fixes: 8d30fe7fa7 ("bonding: support port hotplug")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In hns3_mbx.h, some macro and structure were defined in previous
versions but never used.
Fixes: 463e748964 ("net/hns3: support mailbox")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
The opcode of the link status notification message reported by the
firmware is zero, it will be filtered out because driver treats it as
already processed message. As a result, the PF can't update the link
status in a timely manner.
Because only VF can set opcode to zero when processing mailbox message,
we add a judgment to make sure the PF messages will not be filtered out.
Fixes: dbbbad23e3 ("net/hns3: fix VF handling LSC event in secondary process")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
The hns3_dev_handle_mbx_msg() could be called under both PF and VF,
but the error messages show VF.
Fixes: 109e4dd1bd ("net/hns3: get link state change through mailbox")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Fixes a few different things:
* Remove 'fw_version' NULL checks, it is allowed if the 'fw_size' is
zero, 'fw_version' being NULL but 'fw_size' not zero condition checked
in ethdev layer
* Be sure required buffer size is returned if provided one is not big
enough, instead of returning success (0)
* Document in doxygen comment the '-EINVAL' is a valid return type
* Take into account that 'snprintf' can return negative value
* Cast length to 'size_t' to compare it with 'fw_size'
Fixes: bb42aa9ffe ("net/atlantic: configure device start/stop")
Fixes: ff70acdf42 ("net/axgbe: support reading FW version")
Fixes: e2652b0a20 ("net/bnxt: support get FW version")
Fixes: cf0fab1d2c ("net/dpaa: support firmware version get API")
Fixes: 748eccb97c ("net/dpaa2: add support for firmware version get")
Fixes: b883c0644a ("net/e1000: add firmware version get")
Fixes: 293430677e ("net/enic: add handler to return firmware version")
Fixes: 1f5ca0b460 ("net/hns3: support some device operations")
Fixes: bd5b86732b ("net/hns3: modify format for firmware version")
Fixes: ed0dfdd0e9 ("net/i40e: add firmware version get")
Fixes: e31cb9a362 ("net/ice: support FW version getting")
Fixes: 4f09bc55ac ("net/igc: implement device base operations")
Fixes: eec10fb0ce ("net/ionic: support FW version")
Fixes: 8b0b565742 ("net/ixgbe: add firmware version get")
Fixes: 4d9f5b8adc ("net/octeontx2: add FW version get operation")
Fixes: f97b56f9f1 ("net/qede: support FW version query")
Fixes: 83fef46a22 ("net/sfc: add callback to retrieve FW version")
Fixes: bc84ac0fad ("net/txgbe: support getting FW version")
Fixes: 2191347120 ("ethdev: add firmware version get")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Acked-by: Jiawen Wu <jiawenwu@trustnetic.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Fix up the suffix of the PCI ID to be consistent with the code.
Fixes: 979f2bae07 ("doc: improve multiport PF in nfp guide")
Cc: stable@dpdk.org
Signed-off-by: Chaoyong He <chaoyong.he@corigine.com>
Signed-off-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>
Currently, when we set the acpi governor to "userspace", we check if
it is already set to this value, and if it is, we skip setting it.
However, we never save this value anywhere, so that next time we come
back and request the governor to be set to its original value, the
original value is empty.
Fix it by saving the original pstate governor first. While we're at it,
replace `strlcpy` with `rte_strscpy`.
Fixes: 445c6528b5 ("power: common interface for guest and host")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
In function 'eval_jcc', judgment 'op == EBPF_JLT' occurs
twice, as a result, the corresponding second statement
cannot be accessed.
This patch fix this problem.
Fixes: 8021917293 ("bpf: add extra validation for input BPF program")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
gcc 11 with '-O2' complains about some variables being used without
being initialized:
In function ‘start_flow_avx512x8’,
inlined from ‘search_trie_avx512x8.constprop’ at acl_run_avx512_common.h:317:
lib/librte_acl/acl_run_avx512_common.h:210:13: warning:
‘pdata’ is used uninitialized [-Wuninitialized]
In function ‘search_trie_avx512x8.constprop’:
lib/librte_acl/acl_run_avx512_common.h:314:32: note: ‘pdata’ declared here
...
Indeed, these variables are not explicitly initialized,
but this is done intentionally.
We rely on constant mask value that we pass to start_flow*() functions
as a parameter to mask out uninitialized values.
Note that '-O3' doesn't produce this warning.
Anyway, to support clean build with gcc-11 this patch adds
explicit initialization for these variables.
I checked the output binary: with '-O3' both clang and gcc 10/11
generate no extra code for it.
Also performance test didn't reveal any regressions.
Bugzilla ID: 673
Fixes: b64c2295f7 ("acl: add 256-bit AVX512 classify method")
Fixes: 45da22e42e ("acl: add 512-bit AVX512 classify method")
Cc: stable@dpdk.org
Reported-by: Ali Alnubani <alialnu@nvidia.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add devargs to control each event timer adapter i.e. TIM rings internal
parameters uniquely. The following dict format is expected
[ring-chnk_slots-disable_npa-stats_ena]. 0 represents default values.
Example:
--dev "0002:1e:00.0,tim_ring_ctl=[2-1023-1-0]"
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Add event timer adapter statistics get and reset functions.
Stats are disabled by default and can be enabled through devargs.
Example:
--dev "0002:1e:00.0,tim_stats_ena=1"
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Add function to cancel event timer that has been armed.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Add event timer arm timeout burst function.
All the timers requested to be armed have the same timeout.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Add TIM bucket operations used for event timer arm and cancel.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Add devargs to control default chunk size and max numbers of
timer rings to attach to a given RVU PF.
Example:
--dev "0002:1e:00.0,tim_chnk_slots=1024"
--dev "0002:1e:00.0,tim_rings_lmt=4"
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Add internal SSO functions to allow event adapters to resize SSO buffers
that are used to hold in-flight events in DRAM.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
If the chunks are allocated from NPA then TIM can automatically free
them when traversing the list of chunks.
Add devargs to disable NPA and use software mempool to manage chunks.
Example:
--dev "0002:0e:00.0,tim_disable_npa=1"
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
When the application calls timer adapter create the following is used:
- Allocate a TIM LF based on number of LF's provisioned.
- Verify the config parameters supplied.
- Allocate memory required for
* Buckets based on min and max timeout supplied.
* Allocate the chunk pool based on the number of timers.
On Free:
- Free the allocated bucket and chunk memory.
- Free the TIM lf allocated.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
