Rename buf_physaddr to buf_iova.
Keep the deprecated name in an anonymous union to avoid breaking
the API.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The struct rte_memzone field .phys_addr is renamed to .iova.
The deprecated name is kept in an anonymous union to avoid breaking
the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The function rte_mem_virt2phy() is kept and used in functions which
works only with physical addresses.
For all other calls this function is replaced by rte_mem_virt2iova()
which does a direct mapping (no conversion) in the VA case.
Note: the new function rte_mem_virt2iova() function matches the
behaviour implemented in rte_mem_virt2phy() by the commit
680f6c12600f ("mem: honor IOVA mode in virt2phy")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The PCI lib defines the types and methods allowing to use PCI elements.
The PCI bus implements a bus driver for PCI devices by constructing
rte_bus elements using the PCI lib.
Move the relevant code out of the EAL to its expected place.
Libraries, drivers, unit tests and applications are updated to use the
new rte_bus_pci.h header when necessary.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Some devices may not support or fail setting VLAN offload
configuration based on dynamic circumstances so the
vlan_offload_set_t vector is modified to return an int so
the caller can determine success or not.
rte_eth_dev_set_vlan_offload is updated to return the
value provided by the vector when called along with restoring
the original offload configs on failure.
Existing vlan_offload_set_t vectors are modified to return
an int. Majority of cases return 0 but a few that actually
can fail now return their failure codes.
Finally, a vlan_offload_set_t vector is added to virtio
to facilitate dynamically turning VLAN strip on or off.
Signed-off-by: David Harton <dharton@cisco.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated for a while.
As explained in [1], these flags were kept to let the applications and
PMDs move to the new flag. There is also a need to support Rx vlan
offload without vlan strip (at least for the ixgbe driver).
This patch renames the old flags for this feature, knowing that some
PMDs were using PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT to indicate that
the vlan tci has been saved in the mbuf structure.
It is likely that some PMDs do not set the proper flags when doing vlan
offload, and it would be worth making a pass on all of them.
Link: [1] http://dpdk.org/ml/archives/dev/2017-June/067712.html
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This flag is not necessary at the ether layer anymore.
Buses are able to advertise their hotplug support. The ether layer can
rely upon this capability instead of a special flag.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Fixes: 75cd6fb1d901 ("net/bnxt: fix the association of a MACVLAN per VNIC")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
return value stored in "rc" but it has been overwritten before use.
Coverity issue: 147216
Fixes: 7a5b0874440e ("net/bnxt: support to add a VF MAC address")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are left shifting more bits than we should be doing.
This patch fixes that.
Coverity issue: 127546
Fixes: 778b759ba10e ("net/bnxt: add MAC address")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The case to handle redirect a flow to a VF is not handled.
This patch fixes it.
Fixes: 5ef3b79fdfe6 ("net/bnxt: support flow filter ops")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch removes some redundant code from bnxt_mq_rx_configure().
Fixes: 75cd6fb1d901 ("net/bnxt: fix the association of a MACVLAN per VNIC")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch simplifies logic for RSS queue creation.
1) Do not hardcode number of VNIC pools in case of RSS
2) Log a message if Number of queues is > RTE_ETHDEV_QUEUE_STAT_CNTRS
3) Move the check for allocation of l2_filter inside the for loop.
Fixes: 6133f207970c ("net/bnxt: add Rx queue create/destroy")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are not setting the rx_offload capabilities. Fixing that.
Fixes: 0a6d2a720078 ("net/bnxt: get device infos")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are not indicating VLAN insert capability of HW. Fixing it.
Fixes: 0a6d2a720078 ("net/bnxt: get device infos")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The list of libraries in LDLIBS was generated from the DEPDIRS-xyz
variable. This is valid when the subdirectory name match the library
name, but it's not always the case, especially for PMDs.
The patches removes this feature and explicitly adds the proper
libraries in LDLIBS.
Some DEPDIRS-xyz variables become useless, remove them.
Reported-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
The stats_get dev op API doesn't include return value, so PMD cannot
return an error in case of failure at stats getting process time.
Since PCI devices can be removed and there is a time between the
physical removal to the RMV interrupt, the user may get invalid stats
without any indication.
This patch changes the stats_get API return value to be int instead of
void.
All the net PMDs stats_get dev ops are adjusted by this patch.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
We were not associating a MAC+VLAN per VNIC filter correctly.
This patch fixes that. Also set the VLAN type appropriately.
Fixes: f92735db1e4c ("net/bnxt: add L2 filter alloc/init/free")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Match a flow against existing flows programmed in the HW
and prevent overlapping entries. Also change log level of
some logs to DEBUG.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are not checking if a filter allocation succeeded.
And we end up accessing a null pointer after that.
Also invalidate the fw_l2_filter_id to prevent unnecessary
HW access and hence HWRM command failures during exit.
Fixes: 5ef3b79fdfe6 ("net/bnxt: support flow filter ops")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
For gcc (GCC) 4.8.3 20140911 (Red Hat 4.8.3-7),
As of 5ef3b79fdfe6f, compilation of DPDK fails with the following
ERROR MESSAGE:
"bnxt_filter.c:960:117: error: ‘vnic’ may be used uninitialized in this
function [-Werror=maybe-uninitialized]".
Resolve this by initializing 'vnic' to NULL;
Fixes: 5ef3b79fdfe6 ("net/bnxt: support flow filter ops")
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.
Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.
release_17_11 and deprecation docs have been updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The compilation with gcc-6.3.0 and EXTRA_CFLAGS=-Og gives the following
error:
CC rte_pmd_bnxt.o
rte_pmd_bnxt.c: In function ‘rte_pmd_bnxt_set_all_queues_drop_en’:
rte_pmd_bnxt.c:116:6: error: ‘rc’ may be used uninitialized in this
function [-Werror=maybe-uninitialized]
int rc;
^~
This can happen if both bp->nr_vnics and bp->pf.active_vfs are 0.
Fix it by initializing rc to -EINVAL.
Fixes: 49947a13ba9e ("net/bnxt: support Tx loopback, set VF MAC and queues drop")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
We were hardcoding the max MAC addresses to 32, while the HW
can support more than that. This was restricting the number of VMDQ
pools that we could support. Use the value obtained from FW instead.
Fixes: 804e746c7b73 ("net/bnxt: add hardware resource manager init code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for ntuple filtering.
Only RTE_5TUPLE_FLAGS is supported currently.
RTE_2TUPLE_FLAGS is not supported.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for get/set_eeprom, get_eeprom_length dev_ops.
Defined the structures required to get/set the eeprom length/data
in hsi_struct_defs hdr file along with implementation.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In some cases the interrupt handler is accessing cpr, which has
already been freed causing segfaults. This patch avoids such accesses.
Fixes: 7bc8e9a227cc ("net/bnxt: support async link notification")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
While gathering per queue stats, we are overwriting some of the
stats. This causes some of the counters in xstats to be incorrect.
Fixes: 577d3dced0dc ("net/bnxt: refactor the query stats")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We were not setting the dev_info.hash_key_size. Setting it now.
Fixes: 0a6d2a720078 ("net/bnxt: get device infos")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are not configuring the RSS settings updated by rss_hash_update().
Fixing it.
Fixes: fcc0aa1edc10 ("net/bnxt: add RSS hash configuration")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
update ol_flags with the appropriate status of IP/L4 cksum in Rx path.
Fixes: 2eb53b134aae ("net/bnxt: add initial Rx code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are not correctly setting hw checksum offload for all the
offload flags. This patch fixes that.
Fixes: 6eb3cc2294fd ("net/bnxt: add initial Tx code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Map ETH_VMDQ_ACCEPT_HASH_UC to the promiscuous bit.
Also, set ALLMULTI and MCAST when MCAST is set to ensure multicast traffic
is received regardless of the VF driver list.
Fixes: 4cfe399f6550 ("net/bnxt: support to set VF rxmode")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
