Since commit 4332beee9 "mbuf: expand ol_flags field to 64-bits", the
packet flags are now 64 bits wide. Some occurences were forgotten in
the ixgbe driver.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
According to Intel® 82599 10 GbE Controller Datasheet (Table 7-38), both
L2 and L3 lengths are needed to offload the IP checksum.
Note that the e1000 driver does not need to be patched as it already
contains the fix.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Updated the unit tests to cover both librte_power implementations as well as
the external API.
Signed-off-by: Alan Carew <alan.carew@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
librte_power now contains both rte_power_acpi_cpufreq and rte_power_kvm_vm
implementations.
Signed-off-by: Alan Carew <alan.carew@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Provides a command packet format for host and guest.
Signed-off-by: Alan Carew <alan.carew@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Moved the current librte_power implementation to rte_power_acpi_cpufreq, with
renaming of functions only.
Added rte_power_kvm_vm implementation to support Power Management from a VM.
librte_power now hides the implementation based on the environment used.
A new call rte_power_set_env() can explicidly set the environment, if not
called then auto-detection takes place.
rte_power_kvm_vm is subset of the librte_power APIs, the following is supported:
rte_power_init(unsigned lcore_id)
rte_power_exit(unsigned lcore_id)
rte_power_freq_up(unsigned lcore_id)
rte_power_freq_down(unsigned lcore_id)
rte_power_freq_min(unsigned lcore_id)
rte_power_freq_max(unsigned lcore_id)
The other unsupported APIs return -ENOTSUP
Signed-off-by: Alan Carew <alan.carew@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Allows for the opening of Virtio-Serial devices on a VM, where a DPDK
application can send packets to the host based monitor. The packet formatted is
specified in channel_commands.h
Each device appears as a serial device in path
/dev/virtio-ports/virtio.serial.port.<agent_type>.<lcore_num> where each lcore
in a DPDK application has exclusive to a device/channel.
Each channel is opened in non-blocking mode, after a successful open a test
packet is send to the host to ensure the host side is monitoring.
Signed-off-by: Alan Carew <alan.carew@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Provides a small sample application(guest_vm_power_mgr) to run on a VM.
The application is run by providing a core mask(-c) and number of memory
channels(-n). The core mask corresponds to the number of lcore channels to
attempt to open. A maximum of 64 channels per VM is allowed. The channels must
be monitored by the host.
After successful initialisation a CPU frequency command can be sent to the host
using:
set_cpu_freq <lcore_num> <up|down|min|max>.
Signed-off-by: Alan Carew <alan.carew@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
For launching CLI thread and Monitor thread and initialising
resources.
Requires a minimum of two lcores to run, additional cores specified by eal core
mask are not used.
Signed-off-by: Alan Carew <alan.carew@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
A wrapper around librte_power(using ACPI cpufreq), providing locking around the
non-threadsafe library, allowing for frequency changes based on core masks and
core numbers from both the CLI thread and epoll monitor thread.
Signed-off-by: Alan Carew <alan.carew@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The CLI is used for administrating the channel monitor and manager and
manually setting the CPU frequency on the host.
Supports the following commands:
add_vm [Mul-choice STRING]: add_vm|rm_vm <name>, add a VM for subsequent
operations with the CLI or remove a previously added VM from the VM Power
Manager
rm_vm [Mul-choice STRING]: add_vm|rm_vm <name>, add a VM for subsequent
operations with the CLI or remove a previously added VM from the VM Power
Manager
add_channels [Fixed STRING]: add_channels <vm_name> <list>|all, add
communication channels for the specified VM, the virtio channels must be
enabled in the VM configuration(qemu/libvirt) and the associated VM must be
active. <list> is a comma-separated list of channel numbers to add, using the
keyword 'all' will attempt to add all channels for the VM
set_channel_status [Fixed STRING]:
set_channel_status <vm_name> <list>|all enabled|disabled, enable or disable
the communication channels in list(comma-separated) for the specified VM,
alternatively list can be replaced with keyword 'all'. Disabled channels will
still receive packets on the host, however the commands they specify will be
ignored. Set status to 'enabled' to begin processing requests again.
show_vm [Fixed STRING]: show_vm <vm_name>, prints the information on the
specified VM(s), the information lists the number of vCPUS, the pinning to
pCPU(s) as a bit mask, along with any communication channels associated with
each VM
show_cpu_freq_mask [Fixed STRING]: show_cpu_freq_mask <mask>, Get the current
frequency for each core specified in the mask
set_cpu_freq_mask [Fixed STRING]: set_cpu_freq <core_mask> <up|down|min|max>,
Set the current frequency for the cores specified in <core_mask> by scaling
each up/down/min/max.
show_cpu_freq [Fixed STRING]: Get the current frequency for the specified core
set_cpu_freq [Fixed STRING]: set_cpu_freq <core_num> <up|down|min|max>,
Set the current frequency for the specified core by scaling up/down/min/max
quit [Fixed STRING]: close the application
Signed-off-by: Alan Carew <alan.carew@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The manager is responsible for adding communications channels to the Monitor
thread, tracking and reporting VM state and employs the libvirt API for
synchronization with the KVM Hypervisor. The manager interacts with the
Hypervisor to discover the mapping of virtual CPUS(vCPUs) to the host
physical CPUS(pCPUs) and to inspect the VM running state.
The manager provides the following functionality to the CLI:
1) Connect to a libvirtd instance, default: qemu:///system
2) Add a VM to an internal list, each VM is identified by a "name" which must
correspond a valid libvirt Domain Name.
3) Add communication channels associated with a VM to the epoll based Monitor
thread.
The channels must exist and be in the form of:
/tmp/powermonitor/<vm_name>.<channel_number>. Each channel is a
Virtio-Serial endpoint configured as an AF_UNIX file socket and opened in
non-blocking mode.
Each VM can have a maximum of 64 channels associated with it.
4) Disable or re-enable VM communication channels, channels once added to the
Monitor thread remain in that threads control, however acting on channel
requests can be disabled and renabled via CLI.
The monitor is an epoll based infinite loop running in a separate thread that
waits on channel events from VMs and calls the corresponding functions. Channel
definitions from the manager are registered via the epoll event opaque pointer
when calling epoll_ctl(EPOLL_CTL_ADD), this allows for obtaining the channels
file descriptor for reading EPOLLIN events and mapping the vCPU to pCPU(s)
associated with a request from a particular VM.
Signed-off-by: Alan Carew <alan.carew@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This is a very simple example app for doing packet forwarding with the
Intel DPDK. It's designed to serve as a start point for people new to
the Intel DPDK and who want to develop a new app.
Therefore it's meant to:
* have as good a performance out-of-the-box as possible, using the
best-known settings for configuring the PMDs, so that any new apps can
be based off it.
* be kept as short as possible to make it easy to understand it and get
started with it.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Multi-process DPDK application must mmap hugepages and PCI resources
into the same virtual address space. By default the virtual addresses
are chosen by the primary process automatically when calling the mmap.
But sometimes the chosen virtual addresses aren't usable in secondary
process - for example, secondary process is linked with more libraries
than primary process, and the library occupies the same address space
that the primary process has requested for PCI mappings.
This patch makes EAL try and map PCI BARs right after the hugepages
(instead of location chosen by mmap) in virtual memory, so that PCI BARs
have less chance of ending up in random places in virtual memory.
Signed-off-by: Liang Xu <liang.xu@cinfotech.cn>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
New platforms have more than 64 cores.
Set default max cores number to 128.
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Enable users to specify the lcore id that is used as master lcore.
Signed-off-by: Simon Kuenzer <simon.kuenzer@neclab.eu>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
EAL -c option allows the user to enable any lcore in the system.
Often times, the user app wants to know 1st enabled core, 2nd
enabled core, etc, rather than phyical core ID (rte_lcore_id().)
The new API rte_lcore_index() will return an index from enabled lcores
starting from zero.
Signed-off-by: Patrick Lu <patrick.lu@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
In current version, used cores can only be specified using a bitmask.
It will now be possible to specify cores in 2 different ways:
- Using a bitmask (-c [0x]nnn): bitmask must be in hex format
- Using a list in following format: -l <c1>[-c2][,c3[-c4],...]
The letter -l can stand for lcore or list.
-l 0-7,16-23,31 being equivalent to -c 0x80FF00FF
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Some adjustments are done after options parsing and are common
to Linux and BSD.
Remove process_type adjustment in rte_config_init() because
it is already done in eal_parse_args().
eal_proc_type_detect() is kept duplicated because it open a
file descriptor which is used later in each eal.c.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
No need to have duplicated check for common options.
Some flags are set for options -c and -m in order to simplify the
checks.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Now that internal config structure is common to Linux and BSD,
we can have a common function to initialize it.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Some guards are missing or have a wrong name.
Others have LINUXAPP in their name but are now common.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
No need to have different headers for Linux and BSD.
These files are identicals with exception of internal config which has
uio and vfio fields only useful for Linux.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The directory include/ should be reserved to public headers.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The parameters port_id didn't match with comments about port.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
EAL misses 4 device ID but base codes support them, so add them into EAL.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Test command is added to configure flexible payload
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
test command added to configure flexible mask
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
configure flexible payload and flex mask in i40e driver
It includes arguments verification and HW setting.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
implement operation to get flow director statistics in i40e pmd driver
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
define structures for getting flow director statistics
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
implement operation to get flow director information in i40e pmd driver, includes
- mode
- supported flow types
- table space
- flexible payload size and granularity
- configured flexible payload and mask information
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
define structures for getting flow director information includes:
- mode
- supported flow types
- table space
- flexible payload size and granularity
- configured flexible payload and mask information
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Test command is added to flush flow director table
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
implement operation to flush flow director table
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Extended fdir info is printed in rxonly fwd engine when fdir match.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
setting the FDIR flag and report FD_ID plus flex bytes in mbuf if match
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
fdir field in rte_mbuf is extended to support flex bytes reported when fdir match.
8 flex bytes can be reported in maximum.
The reported flex bytes are part of flexible payload.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Commands are added to test adding or deleting flow director filters.
10 flow types in flow director are supported: ipv4, ipv4-frag, tcpv4, udpv4, sctpv4, ipv6, ipv6-frag, tcpv6, udpv6, sctpv6
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
deal with two operations for flow director
- RTE_ETH_FILTER_ADD
- RTE_ETH_FILTER_DELETE
encode the flow inputs to programming packet
sent the packet to filter programming queue and check status on the status report queue
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
- macros to validate flow_type and pctype
- functions for transition between flow_type and pctype:
- i40e_flowtype_to_pctype
- i40e_pctype_to_flowtype
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
define structures to add or delete flow director filter
- struct rte_eth_fdir_filter
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
set flexible payload related registers to default value at initialization time.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
set up fortville resources to support flow director, includes
- queue 0 pair allocated and set up for flow director
- create vsi
- reserve memzone for flow director programming packet
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
