This patch adds support for registering and waiting for Rx interrupts.
This allows applications to wait for Rx events from the PMD using the
DPDK rte_epoll subsystem.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
This patch is the last patch in the series of patches aimed
to add support for registering and waiting for Rx interrupts
in failsafe PMD. This allows applications to wait for Rx events
from the PMD using the DPDK rte_epoll subsystem.
The failsafe PMD presents to the application a facade of a single
device to be handled by the application while internally it manages
several devices on behalf of the application including packets
transmission and reception.
The Proposed failsafe Rx interrupt scheme follows this approach.
The failsafe PMD will present the application with a single set of
Rx interrupt vectors representing the failsafe Rx queues, while
internally it will serve as an interrupt proxy for its subdevices.
will allow applications to wait for Rx traffic from the failsafe
PMD by registering and waiting for Rx events from its Rx queues.
In order to support this the following is suggested:
* Every Rx queue in the failsafe (virtual) device will be assigned
* a Linux event file descriptor (efd) and an enable_interrupts flag.
* The failsafe PMD will fill in its rte_intr_handle structure with
the Rx efds assigned previously and register them with the EAL.
* The failsafe driver will create a private epoll fd (epfd) and
* will allocate enough space to handle all the Rx events from all its
subdevices.
* Acting as an application,
for each Rx queue in each active subdevice the failsafe will:
o Register the Rx queue with the EAL.
o Pass the EAL the failsafe private epoll fd as the epfd to
register the Rx queue event on.
o Pass the EAL, as a parameter, the pointer to the failsafe Rx
queue that handles this Rx queue.
o Using the DPDK service callbacks, the failsafe PMD will launch
an Rx proxy service that will Wait on the epoll fd for Rx
events from the sub-devices.
o For each Rx event received the proxy service will
- Retrieve the pointer to failsafe Rx queue that handles
this subdevice Rx queue from the user info returned by the
EAL.
- Trigger a failsafe Rx event on that queue by writing to
the event fd unless interrupts are disabled for that queue.
* The failsafe pmd will also implement the rx_queue_intr_enable
* and rx_queue_intr_disable routines that will enable and disable Rx
interrupts respectively on both on the failsafe and its subdevices.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
By default both static and shared libraries should be created while
building MUSDK library. It turns out that this will not happen if
host parameter is not explicitly passed to the configure script.
Specifying host makes sure configure will detect support for shared
libraries.
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Secondary process is not allowed to register mempools on the flight.
The code will return invalid memory key for such case.
Fixes: 87ec44ce1651 ("net/mlx5: add operations for secondary process")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This patch adds information about i40e queue region related to
the release notes.
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Document the need to add the __experimental tag to appropriate functions
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This commit adds a new function rte_eal_cleanup().
The function serves as a hook to allow DPDK to release
internal resources (e.g.: hugepage allocations).
This function allows DPDK to become more like an ordinary
library, where the library context itself can be initialized
and cleaned up by the application.
The rte_exit() and rte_panic() functions must be considered,
particularly if they should call rte_eal_cleanup() to release any
resources or not. This patch adds the cleanup to rte_exit(),
but does not clean up on rte_panic(). The reason to not clean
up on panicing is that the developer may wish to inspect the
exact internal state of EAL and hugepages.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Vipin Varghese <vipin.varghese@intel.com>
This patch add support for various mempool ops config helper APIs.
1.User defined mempool ops
2.Platform detected HW mempool ops (active).
3.Best selection of mempool ops by looking into user defined,
platform registered and compile time configured.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The __rte_cache_aligned was applied to the whole array,
not the array elements. This leads to a false sharing between
the monitored cores.
Fixes: e70a61ad50ab ("keepalive: export states")
Cc: stable@dpdk.org
Signed-off-by: Andriy Berestovskyy <aber@semihalf.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Fix build issue with pdf guides. Some indentations in the bbdev test
application doc were causing build failures. Latex Log message:
doc.log:! LaTeX Error: Too deeply nested.
Fixes: f714a18885a6 ("app/testbbdev: add test application for bbdev")
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Using DPDK in Hyper-V VM systems requires vdev_netvsc driver to pair
the NetVSC netdev device with the same MAC address PCI device by
fail-safe PMD.
Add vdev_netvsc custom scan in vdev bus to allow automatic probing in
Hyper-V VM systems unless it was already specified by command line.
Add "ignore" parameter to disable this auto-detection.
Signed-off-by: Matan Azrad <matan@mellanox.com>
This parameter allows specifying any non-NetVSC interface or routed
NetVSC interfaces to use with tap sub-devices for development purposes.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Matan Azrad <matan@mellanox.com>
NetVSC netdevices which are already routed should not be probed because
they are used for management purposes by the HyperV.
prevent routed netvsc devices probing.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Matan Azrad <matan@mellanox.com>
As described in more details in the attached documentation (see patch
contents), this virtual device driver manages NetVSC interfaces in virtual
machines hosted by Hyper-V/Azure platforms.
This driver does not manage traffic nor Ethernet devices directly; it acts
as a thin configuration layer that automatically instantiates and controls
fail-safe PMD instances combining tap and PCI sub-devices, so that each
NetVSC interface is exposed as a single consolidated port to DPDK
applications.
PCI sub-devices being hot-pluggable (e.g. during VM migration),
applications automatically benefit from increased throughput when present
and automatic fallback on NetVSC otherwise without interruption thanks to
fail-safe's hot-plug handling.
Once initialized, the sole job of the vdev_netvsc driver is to regularly
scan for PCI devices to associate with NetVSC interfaces and feed their
addresses to corresponding fail-safe instances.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Matan Azrad <matan@mellanox.com>
This patch lays the groundwork for this driver (draft documentation,
copyright notices, code base skeleton and build system hooks). While it can
be successfully compiled and invoked, it's an empty shell at this stage.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Matan Azrad <matan@mellanox.com>
Previous fail-safe code didn't support probed sub-devices capture and
failed when it tried to probe them.
Skip fail-safe sub-device probing when it already was probed.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
fix one typo and a grammatical mistake.
Fixes: b0152b1b40fe ("doc: update bonding")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Ethdev Tx offloads API has changed since:
commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")
This commit support the new Tx offloads API.
The code which fills in txq_flags in default_txconf is preserved
because rte_eth_dev_info_get() lacks conversion between offloads
and txq_flags fields which means that a legacy application which
relies on default_txconf will fail to configure Tx queues in the
case when some bits in txq_flags are mandatory.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add note about PMD expects the network interfaces provided to be up,
documented behavior to set expectations right.
Also added minor fix.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
In case of inline protocol processed ingress traffic, the packet may not
have enough information to determine the security parameters with which
the packet was processed. In such cases, application could get metadata
from the packet which could be used to identify the security parameters
with which the packet was processed.
Application could register "userdata" with the security session, and
this could be retrieved from the metadata of inline processed packets.
The metadata returned by "rte_security_get_pkt_metadata()" will be
device specific. Also the driver is expected to return the application
registered "userdata" as is, without any modifications.
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add support for IMIX performance tests, where a distribution
of various packet sizes can be submitted to a crypto
device, testing a closer to a real world scenario.
A sequence of packet sizes, selected randomly from a list of packet
sizes (with "buffer-sz" parameter) with a list of the weights
per packet size (using "imix" parameter), is generated
(the length of this sequence is the same length as the pool,
set with "pool-sz" parameter).
This sequence is used repeteadly for all the crypto
operations submitted to the crypto device (with "--total-ops" parameter).
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
IPSec Multi-buffer library v0.48 has been released,
which includes, among other features, support for AES-CCM.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
When security offload is enabled, the packet should be forwarded on the
port configured in the SA. Security session will be configured on that
port only, and sending the packet on other ports could result in
unencrypted packets being sent out.
This would have performance improvements too, as the per packet LPM
lookup would be avoided for IPsec packets, in inline mode.
Fixes: ec17993a145a ("examples/ipsec-secgw: support security offload")
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
List of supported OpenSSL versions and code block with dependencies were
not properly formatted.
Fixes: d61f70b4c918 ("crypto/libcrypto: add driver for OpenSSL library")
Cc: stable@dpdk.org
Signed-off-by: Andrea Grandi <andrea.grandi@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add a missing space must before the first item of the list to display it
correctly in the User Guide.
Fixes: d61f70b4c918 ("crypto/libcrypto: add driver for OpenSSL library")
Fixes: b79e4c00af0e ("cryptodev: use AES-GCM/CCM as AEAD algorithms")
Cc: stable@dpdk.org
Signed-off-by: Andrea Grandi <andrea.grandi@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Rename eventdev_pipeline_sw_pmd to eventdev_pipeline as it is no longer
specific underlying event device.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add selftest as a device argument that can be enabled by suppling
'self_test=1' as a vdev parameter
--vdev="event_octeontx,self_test=1"
The selftest is run after vdev creation is successfully
complete.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add the description about opdl pmd
Signed-off-by: Liang Ma <liang.j.ma@intel.com>
Signed-off-by: Peter Mccarthy <peter.mccarthy@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
This commit adds a OPDL implementation of the eventdev API. The
implementation here is intended to enable the community to use
the OPDL infrastructure under eventdev API.
The main components of the implementation is three files:
- opdl_evdev.c Creation, configuration, etc
- opdl_evdev_xstats.c helper function to support stats collection
- opdl_evdev.h include the main data structure of opdl
device and all the function prototype
need to be exposed to support eventdev API.
- opdl_evdev_init.c implement all initailization helper function
This commit only adds the implementation, no existing DPDK files
are modified.
Signed-off-by: Liang Ma <liang.j.ma@intel.com>
Signed-off-by: Peter Mccarthy <peter.mccarthy@intel.com>
Add command line option --prod_type_ethdev to specify that the events
are generated by ethernet device.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
- sample application performing a loop-back over ethernet using
a bbbdev device
- 'turbo_sw' PMD must be enabled for the app to be functional
- a packet is received on an ethdev port -> enqueued for baseband
encode operation -> dequeued -> enqueued for baseband decode
operation-> dequeued -> compared with original signal -> looped-back
to the ethdev port
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
- full test suite for bbdev
- test App works seamlessly on all PMDs registered with bbdev
framework
- a python script is provided to make our life easier
- supports execution of tests by parsing Test Vector files
- test Vectors can be added/deleted/modified with no need for
re-compilation
- various tests can be executed:
(a) Throughput test
(b) Offload latency test
(c) Operation latency test
(d) Validation test
(c) Sanity checks
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
- bbdev 'turbo_sw' is the software accelerated version of 3GPP L1
Turbo coding operation using the optimized Intel FlexRAN SDK libraries.
- 'turbo_sw' pmd is disabled by default
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
- 'bbdev_null' is a basic pmd that performs a minimalistic
bbdev operation
- useful for bbdev smoke testing and in measuring the overhead
introduced by the bbdev library
- 'bbdev_null' pmd is enabled by default
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
- wireless baseband device (bbdev) library files
- bbdev is tagged as EXPERIMENTAL
- Makefiles and configuration macros definition
- bbdev library is enabled by default
- release notes of the initial version
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
