ICMP echo replies with invalid checksums may be dropped by network nodes or
ignored by the ping utility.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
In the icmpecho forwarding mode, ARP replies from testpmd contain
invalid zero-filled MAC addresses. This is broken since the commit below.
Fixes: 31db4d38de72 ("net: change arp header struct declaration")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
Add a new top-level "drivers" directory to which all PMDs will be moved
for easier maintenance of both lib folder and drivers themselves. This
new directory is a dependency of all the apps in the app folder, so
the makefiles for each app are updated.
To the new top-level directory add a "net" subdirectory to classify
more specifically our existing PMDs as ethernet drivers
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
[Thomas: fix dependencies and merge several patches]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Latest mbuf changes (priv_size addition and related fixes)
exposed small problem with testpmd and few other sample apps:
when mbuf size is exaclty 2KB or less, that causes
ixgbe PMD to select scattered RX even for configs with 'normal'
max packet length (max_rx_pkt_len == ETHER_MAX_LEN).
To overcome that problem and unify the code, new macro was created
to represent recommended minimal buffer length for mbuf.
When appropriate, samples are updated to use that macro.
Fixes: dfb03bbe2b ("app/testpmd: use standard functions to initialize
mbufs and mbuf pool")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The distributor header file includes the mbuf header file, but it does not
need to do so as it only uses pointers to the struct rte_mbuf type, and
does not use any of the mbuf internals, nor any of the mbuf functions or
macros. Therefore the inclusion is unnecessary, and can be replaced by a
forward declaration of the mbuf type.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Verify that we can attach a mbuf to another one that does not have
the same data room size and priv_size.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Check that the data in the cloned mbuf is the same than in the
reference mbuf.
Check that the reference counter is incremented for each segment.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
It's better to name the mbuf 'm' instead of 'mc' as it's not a clone.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
When it's possible, use the new helper to create the mbuf pools.
Most of the patch is trivial, except for the following files that
have some specifics (indirect mbufs):
- ip_fragmentation
- ip_pipeline
- ipv4_multicast
- vhost
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The rte_pktmbuf_pool_init() and rte_pktmbuf_init() functions now
support to have a non-hardcoded buffer length. We can remove the
specific functions used in testpmd and replace them by the standard
ones.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Deduct the mbuf data room size from mempool->elt_size and priv_size,
instead of using an hardcoded value that is not related to the real
buffer size.
To use rte_pktmbuf_pool_init(), the user can either:
- give a NULL parameter to rte_pktmbuf_pool_init(): in this case, the
private size is assumed to be 0, and the room size is
mp->elt_size - sizeof(struct rte_mbuf).
- give the rte_pktmbuf_pool_private filled with appropriate
data_room_size and priv_size values.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The PCI device id table is immutable and should be made const
in all drivers. The pseudo drivers can initialize their local
copy as necessary.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
To initialize a structure with zeros, one field was explicitly set
to avoid "missing initializer" bug with old GCC (e.g. 4.4).
This warning is now disabled (commit <insertlater>) for old versions of GCC,
so the workarounds may be removed.
These initializers should not be needed for static variables but they
are still used to workaround an ICC bug (see commit b2595c4aa92d).
There is one remaining exception where {0} initializer doesn't work cleanly,
even with recent GCC:
lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c:735:9:
error: missing braces around initializer [-Werror=missing-braces]
struct rte_mbuf mb_def = {0}; /* zeroed mbuf */
Tested with gcc-4.4.7 (CentOS), gcc-4.7.2 (Debian), gcc-4.9.2 (Arch),
clang-3.6.0 and icc-13.1.1.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: John McNamara <john.mcnamara@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com>
The ethernet device ops function table should be made const for
safety and security.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The test PMD uses a special type of eth_dev_ops to test features.
Rather allocating this separately, just put in the private data area.
This allows for next change to make dev_ops const.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
rte_free like Glibc free allows rte_free(NULL) as null operation.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Remove useless memset, since dev_private is created by rte_zmalloc
it must already be zero.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Document the functions introduced by commit 64fc36064d.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
After the last enabled port has been seen, and the last time we
evaluate the loop condition, there is an out of bounds read in
ports[p].enabled because p is equal to size, which is the length of
ports.
Signed-off-by: Julien Cretin <julien.cretin@trust-in-soft.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Option var-tracking-assignments supported in gcc from 4.4.
Add gcc version check wil fix this issue.
error: unrecognized command line option "-fno-var-tracking-assignments"
Fixes: 74adbc5ef704 ("app/test: disable variable tracking assignment for memcpy")
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Build app/test will be failed for function only defined but not used.
test_prefetch.c:65: error: ‘testfn_prefetch_cmd’ defined but not used
Add attribute used in test function declaration can fix this.
static void __attribute__((used)) testfn_##t(void);
Fixes: 727909c59231 ("app/test: introduce dynamic commands list")
Signed-off-by: Marvin Liu <yong.liu@intel.com>
When port id is RTE_PORT_ALL, port_id_is_invalid will also return zero.
So this function will only set ports[255] need_reconfig flag, other ports will
be skipped.
Fixes: edab33b1c01d ("app/testpmd: support port hotplug")
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
Fix a warning when the rte_common.h header is included in a compilation
using -Wbad-function-cast, such as in Open vSwitch where the
following warning is emitted repeatedly:
../rte_common.h: In function 'rte_is_aligned':
../rte_common.h:184:9: warning: cast from function call of
type 'uintptr_t' to non-matching type 'void *' [-Wbad-function-cast]
This change fixes the issue in rte_common.h by using the RTE_ALIGN_FLOOR
macro to get the aligned floor value with generic type casting.
Also removed the rte_align_floor_int() function and replaced it with
the RTE_PTR_ALIGN_FLOOR() macro.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
testpmd parameter "nb-port" mean the number of forwarding port.
It's incorrect to use function port_id_is_invalid to check number of ports.
Fixes: edab33b1c01d ("app/testpmd: support port hotplug")
Signed-off-by: Yong Liu <yong.liu@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Ixgbe doesn't support the ipv4-frag and ipv6-frag flow types, remove them.
Ixgbe doesn't support configure flex mask on each kind of flow type, this
patch uses RTE_ETH_FLOW_UNKNOWN to specify global flex mask setting.
This patch also changes the string "raw" to "none" to indicate flex mask
setting unrelated with flow type in testpmd for ixgbe.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
When user quits testpmd, and there is traffic being forwarded,
that may produce a segmentation fault, due to ports being closed,
while they are still transmitting packets.
This patch prevents the issue from happening,
by stopping packet forwarding before closing the ports.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
There is no remaining reference to E_RTE_NO_TAILQ.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This register system makes it possible to reserve a tailq for the dpdk
libraries.
The "dynamic" tailqs are right after the "static" tailqs in shared mem.
Primary process is responsible for writing the tailq names, so that secondary
processes can find them.
This is a temp commit, "static" tailqs are removed after conversion of all
users in next commits.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The "reserve" macros and functions do not check if the requested entry is free.
They do nothing more than the lookup function (which itself "creates" entries
...).
The rte_tailq api is marked as "internal use" in documentation and these macros
are only used in test application, so just get rid of them.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
test_hash.c: In function ‘test_crc32_hash_alg_equiv’:
error: format ‘%lu’ expects argument of type ‘long unsigned int’,
but argument 2 has type ‘size_t’ [-Werror=format]
According to C99, for size_t type should use format "%zu"
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch enables testpmd user can config port hw_vlan with more fine granularity:
hw vlan filter, hw vlan strip, and hw vlan extend.
Don't remove the original command(hw-vlan) considering that some user still want to use
only one command to switch on/off all 3 options.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch modifies testpmd behavior when setting:
rx_vlan add all vf_port (enabling all vlanids
to be passed thru rx filter on VF).
Rx_vlan_all_filter_set() function,
checks if the next vlanid can be enabled by the driver.
Number of vlanids is limited by the NIC and thus the NIC
do not allow to enable more vlanids than it can allocate
in VFTA table.
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
When invoking creation of bonded device using:
create bonded device mode socket in testpmd the bonded port was not
enabled at the end of cmd_create_bonded_device_parsed function.
This caused commands 'show port info' and 'show port stats' not working
properly with bonding device. This patch fixed it.
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Currently, if try to start/stop/close one invalid port,
no error shows in testpmd.
This is a bug, need check the port number.
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Tetsuya Mukawa <mukawa@igel.co.jp>
As hotplug has been enabled, start the testpmd with no nic binded
will show one error log "Please stop the ports first":
Interactive-mode selected
Please stop the ports first
Done
testpmd>
This issue is cause by the logic of check link status.
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The malloc family returns void * and therefore cast is unnecessary.
Use calloc rather than zmalloc with multiply for array.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
If testpmd is invoked with portmask option like below, segmentation
fault will occur. This patch fixes the issue.
Reported-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The patch introduces following commands.
- port attach [ident]
- port detach [port_id]
- attach: attaching a port
- detach: detaching a port
- ident: pci address of physical device.
Or device name and parameters of virtual device.
(ex. 0000:02:00.0, eth_pcap0,iface=eth0)
- port_id: port identifier
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
This new parameter is needed to keep device type like PCI or virtual.
Port detaching processes are different between PCI device and virtual
device.
RTE_ETH_DEV_PCI indicates device type is PCI. RTE_ETH_DEV_VIRTUAL
indicates device is virtual.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
New function test_crc32_hash_alg_equiv() checks whether software,
4-byte operand and 8-byte operand versions of CRC32 hash function
implementations return the same result value.
Signed-off-by: Yerden Zhumabekov <e_zhumabekov@sts.kz>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Main code changes:
1. Added more typical data points for a thorough performance test
2. Added unaligned test cases since it's common in DPDK usage
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Removed unnecessary test cases for base move functions
since the function "func_test" covers them all.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
VTA is for debugging only, it increases compile time and binary size,
especially when there're a lot of inlines.
So disable it since memcpy test contains a lot of inline calls.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
- API rte_timer_reset() should return -1 when the timer is in the
RUNNING or CONFIG state. Instead, it ignores the return value of
internal function __rte_timer_reset() and always returns 0.
We change rte_timer_reset() to return the value returned by
__rte_timer_reset().
- Enhance timer stress test 2 to report how many timer reset
collisions occur, i.e., how many times rte_timer_reset() fails
due to a timer being in the CONFIG state.
Signed-off-by: Robert Sanford <rsanford2@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
In test_sched, we are missing NULL pointer checks after create_mempool()
and rte_pktmbuf_alloc(). Add in these checks using TEST_ASSERT_NOT_NULL macros.
VERIFY macro was removed and replaced by standard test ASSERTS from "test.h" header.
This provides additional information to track when the failure occurred.
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Following commit c07691ae1089, an implicit change has been done in the
devargs API.
This triggers problem in virtual pmds that did not check for parameters
validity as it was implicitely valid.
Fix this by restoring the empty argument as "" and add a note in the api.
Restore associated tests.
Fixes: c07691ae1089 ("devargs: remove limit on parameters length")
Reported-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Tested-by: Tetsuya Mukawa <mukawa@igel.co.jp>
