The autotests are too long to be run often.
This patch reduces the needed time of some tests in fast_test.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The rte_pktmbuf_detach() function should decrease refcnt on a direct
buffer as stated in doc/guides/prog_guide/mbuf_lib.rst:
"whenever the indirect buffer is detached, the reference counter on the
direct buffer is decremented."
Signed-off-by: Hiroyuki Mikita <h.mikita89@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
No need to split mbuf structure to two cache lines for 128-byte cache
line size targets as it can fit on a single 128-byte cache line.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
fix the error reported by checkpatch:
"ERROR: return is not a function, parentheses are not required"
remove parentheses in return like:
"return (logical expressions)"
remove parentheses in return a function like:
"return (rte_mempool_lookup(...))"
Fixes: 6307b909b8 ("lib: remove extra parenthesis after return")
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
On machines that are strict on pointer alignment, current code breaks
on GCC's -Wcast-align checks on casts from narrower to wider types.
This patch introduces new unaligned_uint(16|32|64)_t types, which
correctly retain alignment in such cases. Strict alignment
architectures will need to define CONFIG_RTE_ARCH_STRICT_ALIGN in
order to effect these new types.
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Verify that we can attach a mbuf to another one that does not have
the same data room size and priv_size.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Check that the data in the cloned mbuf is the same than in the
reference mbuf.
Check that the reference counter is incremented for each segment.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
It's better to name the mbuf 'm' instead of 'mc' as it's not a clone.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
When it's possible, use the new helper to create the mbuf pools.
Most of the patch is trivial, except for the following files that
have some specifics (indirect mbufs):
- ip_fragmentation
- ip_pipeline
- ipv4_multicast
- vhost
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch removes all references to RTE_MBUF_REFCNT, setting the refcnt
field in the mbuf struct permanently.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
CACHE_LINE_SIZE is a macro defined in machine/param.h in FreeBSD and
conflicts with DPDK macro version.
Adding RTE_ prefix to avoid conflicts.
CACHE_LINE_MASK and CACHE_LINE_ROUNDUP are also prefixed.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
[Thomas: updated on HEAD, including PPC]
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This change splits the mbuf in two to move the pool and next pointers to
the second cache line. This frees up 16 bytes in first cache line.
The reason for this change is that we believe that there is no possible
way that we can ever fit all the fields we need to fit into a 64-byte
mbuf, and so we need to start looking at a 128-byte mbuf instead. Examples
of new fields that need to fit in, include -
* 32-bits more for filter information for support for the new filters in
the i40e driver (and possibly other future drivers)
* an additional 2-4 bytes for storing info on a second vlan tag to allow
drivers to support double Vlan/QinQ
* 4-bytes for storing a sequence number to enable out of order packet
processing and subsequent packet reordering
as well as potentially a number of other fields or splitting out fields
that are superimposed over each other right now, e.g. for the qos scheduler.
We also want to allow space for use by other non-Intel NIC drivers that may
be open-sourced to dpdk.org in the future too, where they support fields
and offloads that currently supported hardware doesn't.
If we accept the fact of a 2-cache-line mbuf, then the issue becomes
how to rework things so that we spread our fields over the two
cache lines while causing the lowest slow-down possible. The general
approach that we are looking to take is to focus the first cache
line on fields that are updated on RX , so that receive only deals
with one cache line. The second cache line can be used for application
data and information that will only be used on the TX leg. This would
allow us to work on the first cache line in RX as now, and have the
second cache line being prefetched in the background so that it is
available when necessary. Hardware prefetches should help us out
here. We also may move rarely used, or slow-path RX fields e.g. such
as those for chained mbufs with jumbo frames, to the second
cache line, depending upon the performance impact and bytes savings
achieved.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The mbuf structure already contains a pointer to the beginning of the
buffer (m->buf_addr). It is not needed to use 8 bytes again to store
another pointer to the beginning of the data.
Using a 16 bits unsigned integer is enough as we know that a mbuf is
never longer than 64KB. We gain 6 bytes in the structure thanks to
this modification.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
* Updated to apply to latest on mainline.
* Disabled vector PMD in config as it relies heavily on the mbuf layout
This will be re-enabled in a subsequent commit once vPMD has been
reworked to take account of mbuf changes.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The rte_pktmbuf structure was initially included in the rte_mbuf
structure. This was needed when there was 2 types of mbuf (ctrl and
packet). As the control mbuf has been removed, we can merge the
rte_pktmbuf into the rte_mbuf structure.
Advantages of doing this:
- the access to mbuf fields is easier (ex: m->data instead of m->pkt.data)
- make the structure more consistent: for instance, there was no reason
to have the ol_flags field in rte_mbuf
- it will allow a deeper reorganization of the rte_mbuf structure in the
next commits, allowing to gain several bytes in it
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
[Bruce: updated for latest code and new example apps]
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The initial role of rte_ctrlmbuf is to carry generic messages (data
pointer + data length) but it's not used by the DPDK or it applications.
Keeping it implies:
- loosing 1 byte in the rte_mbuf structure
- having some dead code rte_mbuf.[ch]
This patch removes this feature. Thanks to it, it is now possible to
simplify the rte_mbuf structure by merging the rte_pktmbuf structure
in it. This is done in next commit.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
* Updated patch to HEAD.
* Modified patch to retain the old function names for ctrl mbufs as
macros. This helps with app compatibility, and allows the concept
of a control mbuf to be reintroduced via a single-bit flag in
a future change.
* Updated the packet framework ip_pipeline example application to
work following this change.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
It seems that RTE_MBUF_SCATTER_GATHER is not the proper name for the
feature it provides. "Scatter gather" means that data is stored using
several buffers. RTE_MBUF_REFCNT seems to be a better name for that
feature as it provides a reference counter for mbufs.
The macro RTE_MBUF_SCATTER_GATHER is poisoned to ensure this
modification is seen by drivers or applications using it.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Remove all tests from the builtin commands list and use the dynamic commands
list register macro.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This commit removes trailing whitespace from lines in files. Almost all
files are affected, as the BSD license copyright header had trailing
whitespace on 4 lines in it [hence the number of files reporting 8 lines
changed in the diffstat].
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: remove spaces before tabs in libs]
[Thomas: remove more trailing spaces in non-C files]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The DPDK dump functions are useful for remote debugging of an
applications. But when application runs as a daemon, stdout
is typically routed to /dev/null.
Instead change all these functions to take a stdio FILE * handle
instead. An application can then use open_memstream() to capture
the output.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
[Thomas: fix quota_watermark example]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Some features are not available if LIBRTE_CMDLINE is disabled:
- interactive commands
- cmdline tests
Remove also cmdline_parse includes which are not needed.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
