Packets containing empty segments are dropped by hypervisor, prevent
this case by skipping empty segments in transmission.
Also drop empty mbufs to be sure that at least one segment is transmitted
for each mbuf.
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Yong Wang <yongwang@vmware.com>
When several TCP fragments are contained in a packet that is only one mbuf
segment long, vmxnet3 receives an empty segment following first one, that
contains offload information. In current version, this segment is
propagated as is to upper application.
Remove those empty segments directly when receiving buffers, they may
generate unneeded extra processing in the upper application.
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Yong Wang <yongwang@vmware.com>
Not so old variants of vmxnet3 do not provide MSS value along with
LRO packet. When this case happens, try to guess MSS value with
information at hand.
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Yong Wang <yongwang@vmware.com>
Add support for IPv6, LRO and properly set packet type in all
supported cases.
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Yong Wang <yongwang@vmware.com>
In case we are working on a multisegment buffer, most bit are set
in last segment of the buffer. Correctly look at those bits in eop part
of the rx_offload function.
Fixes: 2fdd835f992c ("vmxnet3: support jumbo frames")
Cc: stable@dpdk.org
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Yong Wang <yongwang@vmware.com>
Offloads are split between first and last segment of a packet.
Call a single vmxnet3_rx_offload function that will contain all
offload operations. This patch does not introduce any code modification.
Pass a vmxnet3_hw as parameter to the function, it is not presently
used in this patch, but will be later used for TSO offloads.
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Yong Wang <yongwang@vmware.com>
Rather than parsing IP header to get proper ptype to return, just return
RTE_PTYPE_L3_IPV4_EXT_UNKNOWN, that tells application that we have an IP
packet with unknown header length.
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Yong Wang <yongwang@vmware.com>
During the transition to resurrect flow director on top of rte_flow, mask
handling was removed by mistake.
Fixes: 4c3e9bcdd52e ("net/mlx5: support flow director")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This will help to bring back the mask handler which was removed when this
feature was rewritten on top of rte_flow.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The memory region is [start, end), so if the memseg of 'end' isn't
allocated yet, the returned memseg will have zero entries and this will
make 'end' zero (nil).
Fixes: c2fe5823224a ("net/mlx4: use virt2memseg instead of iteration")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The memory region is [start, end), so if the memseg of 'end' isn't
allocated yet, the returned memseg will have zero entries and this will
make 'end' zero (nil).
Fixes: 718e35999c96 ("net/mlx5: use virt2memseg instead of iteration")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Initialize mbuf->data_off to RTE_PKTMBUF_HEADROOM after allocation.
Without this, it might be possible that the DMA address provided
to the HW may not be in sync to what is indicated to the application
in bnxt_rx_pkt.
Fixes: 2eb53b134aae ("net/bnxt: add initial Rx code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In some cases bnxt_hwrm_cfa_l2_set_rx_mask is being called before
VNICs are allocated. The FW returns an error in such cases.
Move bnxt_init_nic to bnxt_dev_init such that the ids are initialized
to an invalid id.
Prevent sending the command to the FW only with a valid vnic id.
Fixes: 244bc98b0da7 ("net/bnxt: set L2 Rx mask")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
While creating TX, Rx, CQ rings use cached DB address instead of
getting it from the PCI memory resource.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The vmxnet3 never attempts link speed negotiation. As a virtual device
the link speed is vague at best. However, it is important for certain
applications, like bonding, to see a consistent link_status. 802.3ad
requires that only links of the same cost (link speed) be enslaved.
Keeping the link status consistent in vmxnet3 avoids races with bonding
enslavement.
Fixes: 1e3a958f40b3 ("ethdev: fix link autonegotiation value")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <chas3@att.com>
Acked-by: Yong Wang <yongwang@vmware.com>
Update link status related feature document items and minor updates in
some link status related functions.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Vmxnet3 driver supports receive data ring viz. a set of small sized
buffers that are always mapped by the emulation. If a packet fits into
the receive data ring buffer, the emulation delivers the packet via the
receive data ring.
Increasing the receive data ring descriptor size from 128 to 256
showed performance gains as high as 5% for packets smaller than 256.
Signed-off-by: Shraddha Joshi <jshraddha@vmware.com>
Acked-by: Jin Heo <heoj@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Acked-by: Boon Ang <bang@vmware.com>
Acked-by: Yong Wang <yongwang@vmware.com>
This patch provides a fix for PCI function level reset after an
ungraceful exit from an application. The fix is to enable internal
target read as part of device attach before getting device information
from device config space, device itself and shared memory. In addition
to that, add a 200ms delay for the recovery flow to complete.
Fixes: 540a211084a7 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Some values are interpreted without endian conversion and/or without
taking the proper mask into account.
Fixes: 5ef3b79fdfe6 ("net/bnxt: support flow filter ops")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The number of queues provided by the application is not checked against
parser's supported maximum.
Fixes: 3d821d6fea40 ("net/mlx5: support RSS action flow rule")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
When an unsupported hash type is part of a RSS configuration structure, it
is silently ignored instead of triggering an error. This may lead
applications to assume that such types are accepted, while they are in fact
not part of the resulting flow rules.
Fixes: 078b8b452e6b ("net/mlx4: add RSS flow rule action support")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Due to missing ____cacheline_aligned definition compiler treats it as a
global variable replace it with proper cache alignment macro.
Fixes: 9e890103267e ("net/axgbe: add Rx/Tx setup")
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
A local variable was used without initialization and triggered a
coverity issue.
Is is fixed here, but there is no ill effect of not initializing
the variable in this case. 'rxq_interrupt_offset' is irrelevant
if 'rxq_interrupt_enable' is not set (the condition caught by
coverity).
Coverity issue: 268314
Fixes: fc2c8c0668fd ("net/enic: use Tx completion index instead of messages")
Cc: stable@dpdk.org
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
thunderx pmd driver passes dev_info.max_rx_pktlen as
9200 (via rte_eth_dev_info_get()) to application.
But, when application tries to set MTU as
(9200 - sizeof(ethernet_header_t)) the operation fails
because of missing CRC and VLAN additions.
This patch fixes the following for thunderx pmd driver:
- Sets NIC_HW_MAX_FRS to 9216 (instead of 9200)
- Sets NIC_HW_MAX_MTU to 9190 (NIC_HW_MAX_FRS - ETH_HLEN
- ETHER_CRC_LEN - 2*VLAN_HLEN)
- Sets dev_info->max_rx_pkt_len to NIC_HW_MAX_MTU +
ETH_HLEN (instead of 9200)
- Allows rte_eth_dev_set_mtu() to pass if application
(like VPP) calls rte_eth_dev_set_mtu() before
rte_eth_dev_start() by putting appropriate check for
dev->data->dev_started
Fixes: 65d9804edc05 ("net/thunderx: support MTU configuration")
Cc: stable@dpdk.org
Signed-off-by: Nitin Saxena <nitin.saxena@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch fixes a segment fault in ixgbevf_vlan_offload_set( )
when a Rx queue with index < max_rx_queues is not setup.
For such queue, rxq = dev->data->rx_queues[i] is null pointer.
Fixes: 860a94d3c692 ("net/ixgbe: support VLAN strip per queue offloading in VF")
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Xueqin Lin <xueqin.lin@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds missing supported Tx multi-segs offloading.
Fixes: 51215925a32f ("net/ixgbe: convert to new Tx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add ixgbe MDIO lock/unlock and access APIs to read and write registers
using specific device address. This provides MDIO access to any devices
that are not associated with the autoprobed PHY.Export these APIs via
the map file
Signed-off-by: Shweta Choudaha <shweta.choudaha@att.com>
Reviewed-by: Chas Williams <chas3@att.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Since we are storing the mem_zone address for each ring created,
we are freeing the same address multiple times.
For example the memory zone created for Rx is being freed during
Rx ring cleanup, AGG ring cleanup and CQ cleanup.
Avoid this by storing the memory zone address in RXQ instead and
free it as a part of queue_release dev_op.
In the same way do the same for TX queues as well.
Fixes: 51c87ebafc7d ("net/bnxt: add Tx queue create/destroy")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Memory allocated to hold VF filter info is not being freed currently.
This can cause potential memory leak.
Fixes: 7a5b0874440e ("net/bnxt: support to add a VF MAC address")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The fw_l2_filter_id for a ntuple filter is needed only for the lifetime
of the ntuple filter. Once the filter is free, reset the field.
The associated l2_filter will be freed as a part of its own cleanup.
Fixes: 5ef3b79fdfe6 ("net/bnxt: support flow filter ops")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The hwrm_queue_qportcfg command has been extended to determine
the COS queue that a Tx ring needs to use. This patch adds code
to determine the information from the FW and use it while
creating the Tx rings.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
bnxt_hwrm_clear_l2_filter needs to be called only if the filter type
is L2 and not otherwise.
Also check for the return value of bnxt_hwrm_clear_l2_filter().
Fixes: 5ef3b79fdfe6 ("net/bnxt: support flow filter ops")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are wrongly freeing up a filter in the driver while it is still
configured in the HW. This can cause incorrect L2 filter id to be
used for filters created subsequently.
This filter will be cleared on cleanup anyway.
Fixes: 5ef3b79fdfe6 ("net/bnxt: support flow filter ops")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fix Rx checksum status for tunnel frames as seen by hardware.
Current code does not handle cases for tunnel frames correctly.
Fixes: 7ec39d8c524b ("net/bnxt: update status of Rx IP/L4 CKSUM")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are wrongly setting the Rx path flag while creating the ntuple filter.
It needs to be set for L2 or Exact Match filters only.
Fixes: 5ef3b79fdfe6 ("net/bnxt: support flow filter ops")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Recent NIC models support overlay offload. The overlay offload
feature enables the following on the NIC.
- Rx/Tx checksum offloads for both inner and outer packets.
- Rx inner packet type classification.
- TSO.
- Inner RSS.
TX descriptors do not require any changes, except the header length
for TSO. The NIC parses outer/inner packets and performs offloads on
them as necessary. The header length for tunneled TSO includes both
inner and outer headers.
The NIC actually parses and performs the above for NVGRE as well. DPDK
currently has no offload flags for NVGRE, and the hardware has no
controls to individually enable tunnel types either. So do nothing for
now.
The driver enables overlay offload by default. Add a devargs
'disable-overlay=<0|1>' to allow the app to disable it.
Also update the enic guide doc.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
When non IP packets are sent on TUN interface, the logic put Ipv6 as
protocol field in header. With the current patch, the check is modified
for ipv4, ipv6 and non ip.
Fixes: 204d026a3922 ("net/tap: support tun")
Suggested-by: Ophir Munk <ophirmu@mellanox.com>
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Fixes: 4ec1fc3ba881 ("net/sfc: add basic stubs for RSS support on driver attach")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Modified enic_del_mac_address() to get a return value from the vnic layer.
Reused the .mac_addr_add and .mac_addr_del callbacks code to implement
primary mac address handler.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
