Support for SXGMII port has been enabled. It will
depends on boot loader information passed through IERB.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
There was an error at rte_constant_bswap64 while compiling
with big endian toolchain. so fixing it by adding type cast.
Also, rte_pktmbuf_alloc API should be used to allocate mbuf
instead of rte_pktmbuf_raw_alloc to avoid use of stale mbuf
information.
Fixes: 469c6111a799 ("net/enetc: enable Rx and Tx")
Cc: stable@dpdk.org
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
First configure ring with BDs properly then enable
the ring.
Fixes: 469c6111a799 ("net/enetc: enable Rx and Tx")
Cc: stable@dpdk.org
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
The RSS validation function was missing the verifcation that
if RSS is requested on inner packet, the flow must have tunnel data.
Fixes: 23c1d42c7138 ("net/mlx5: split flow validation to dedicated function")
Cc: stable@dpdk.org
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Enable the optic module vendor and part number verification from driver
by setting appropriate flags. Link handling module in conjunction with
FW performs optic module verification.
Without this fix the SFP is powered down and the link doesn't come up,
if module verification is enforced in nvram setting.
Fixes: 540a211084a7 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
The periodic callout function and the interrupt handler both modify the
periodic flags. There is a possible race condition when an application
is going through dev_stop()/dev_start() and an interrupt handler is
invoked. We also need to ensure that periodic polling is not invoked in
interrupt context.
This patch handles such case by using separate variable to check for
interrupt context. Also, atomically load and store the periodic flag
value.
Fixes: 0f6ebeee2402 ("net/bnx2x: fix call to link handling periodic function")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
In some cases, DPDK application may send packets
while PMD is going through load or unload flow.
This causes firmware to access invalid/unallocated
memory to process transmit buffer. Which results in
error on PCI bus and chip further blocks access to host,
causing a DMAE timeout.
Fix this issue by installing dummy empty transmit and receive
handlers at the beginning of unload path (rte_eth_dev_stop())
and install actual transmit and receive handlers after successful
load of the PMD port (rte_eth_dev_start()). This way, application
won't be able to send packets while device is going through
load/unload flow.
Fixes: 540a211084a7 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
There is a race condition while processing RAMROD
completion in fast path queue through interrupt handler
and polling method.
Interrupt handler invoked from actual interrupt event
and from RAMROD processing polling flow may create a
situation where one flow will read and clear a fastpath
interrupt without actually processing the RAMROD completion.
Thus, causing a RAMROD timeout even though HW sent an
completion event.
Fix this by introducing an atomic variable which will be
set only when interrupt handler needs to process RAMROD
completion.
Fixes: 540a211084a7 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
We allocate DMA memory but never free after using it.
Add function to free DMA memory.
Fixes: b5bf7719221d ("bnx2x: driver support routines")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Fix to update eth dev MTU for jumbo frames
Fixes: 540a211084a7 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Currently PKT_TX_VLAN and PKT_TX_QINQ mbuf flags are documented as
they are to say packet contains VLAN or QINQ information.
Updating the definition as they are requests from application to
driver to insert VLAN or double VLAN tags into packet.
Fixes: dc6c911c9993 ("mbuf: use reserved space for double vlan")
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The pipefail option is not supported in /bin/sh, just in bash/ksh and
similar shells - which means it's there by default on most Linux distros
but not on e.g. FreeBSD. Therefore we check for it's presence before
setting the option, and if it's missing, we upgrade verbosity level if
needed to ensure we never hide any build failures.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Build of test_compressdev.c fails on FreeBSD due to the missing
include of unistd.h, to provide the function usleep.
Fixes: b06aa643cac4 ("test/compress: add initial unit tests")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Fixed the compilation error:
app/test/test_compressdev.c:1949:11: note:
previous definition of 'i' was here
app/test/test_compressdev.c:1992:2: error:
'for' loop initial declarations are only allowed in C99 mode
app/test/test_compressdev.c:1992:2: note:
use option -std=c99 or -std=gnu99 to compile your code
app/test/test_compressdev.c:1996:19: warning:
assignment from incompatible pointer type [enabled by default]
Fixes: 355b02eedc65 ("test/compress: add max mbuf size test case")
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
The type for MAC address should be unsigned.
Fixes: 1cfe212ed17a ("kni: support MAC address change")
Cc: stable@dpdk.org
Signed-off-by: Jie Pan <panjie5@jd.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Rami Rosen <ramirose@gmail.com>
It allows applications running packet sockets over KNI interfaces to get
source Ethernet addresses of packets received using recvfrom function.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Build error seen with Linux kernel 5.1 and
when CONFIG_RTE_KNI_KMOD_ETHTOOL is enabled.
Build error:
kernel/linux/kni/igb_main.c:2352:18:
error: initialization of ... from incompatible pointer type ...
[-Werror=incompatible-pointer-types]
.ndo_fdb_add = igb_ndo_fdb_add,
^~~~~~~~~~~~~~~
ndo_fdb_add() is changed in Linux kernel version 5.1 and now requires
a new parameter, 'struct netlink_ext_ack *extack':
Linux Commit 87b0984ebfab ("net: Add extack argument to ndo_fdb_add()")
ndo_fdb_add() parameter updated with compile time Linux kernel version
check.
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Rami Rosen <ramirose@gmail.com>
Added crypto_dequeue_burst() function to call
rte_crypto_dequeue_burst() in a loop with a
delay to ensure that all the packets are
dequeued from the crypto device.
Fixes: 59d7353b0df0 ("test/ipsec: fix test suite setup")
Cc: stable@dpdk.org
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The socket_id is used as an array index so should be within the range
of zero to max numa nodes. Add a range check to ensure we don't get
excessive values.
Coverity issue: 336812
Coverity issue: 336829
Fixes: 2c59bd32b70d ("cryptodev: do not create session mempool internally")
CC: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds new test case in which max. size of
chain mbufs has been used to compress random data dynamically.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Tomasz Cel <tomaszx.cel@intel.com>
Opendir() returns allocated storage which must be freed at the
end of function or in case any return on error. so freeing the
allocation using closedir in an error case.
Coverity issue: 323507
Coverity issue: 325880
Fixes: e7a45f3cc245 ("crypto/caam_jr: add UIO specific operations")
Cc: stable@dpdk.org
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
CAAM return wrong digest value in AUTH only sg test case
because digest calculated on wrong length of data
Fixes: 71dd6b9d44e7 ("crypto/caam_jr: add scatter gather")
Cc: stable@dpdk.org
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
build a shared descriptor accordingly if core and
CAAM endianness is same or different
Fixes: 6ef6beca8844 ("crypto/caam_jr: add enqueue/dequeue operations")
Cc: stable@dpdk.org
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
IPSec Multi-buffer library has recently added API
that sets pointers depending on the architecture, at initiliazation,
in version 0.52.
AESNI MB PMD was updated with these changes, but not
the AESNI GCM PMD, which also uses the same library.
This makes the PMD to be only compatible with version 0.52,
but makes both PMD consistent on version compatibility,
plus adds support for AVX512.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The supported algorithm tables for AESNI MB PMD were
missing some supported algorithms.
Fixes: 0e9f8507afcb ("crypto/aesni_mb: support AES-GCM algorithm")
Fixes: e5eecd3dc838 ("crypto/aesni_mb: support AES-GMAC")
Fixes: 11fdbf1b7866 ("crypto/aesni_mb: support plain SHA")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
added check to see if a session for a device
has been initialised if it has return 0.
Fixes: 5d6c73dd5938 ("cryptodev: add reference count to session private data")
Cc: stable@dpdk.org
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
As a result of the cmac test running the test where
PT len is 65536 it should give a result back to the
user USER1: Error -1: Prepare op USER1: PT len 65536
as this MSG len is not supported. Issue was
that the application was not freeing the op properly after
a while causing the app to fail.
CRYPTODEV: rte_cryptodev_sym_session_create() line 1340:
couldn't get object from session mempool
USER1: Error -12: test block
USER1: Error -12: Failed test CMAC/req/CMAC.req
Fixes: cd255ccf5764 ("examples/fips_validation: support AES parsing")
Cc: stable@dpdk.org
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Application was failing as the HMAC and
Plain SHA fips request files are similar in a
way that they both have SHA- in the top section to
determine the hash algo and hash sizes. And HMAC having the
algo in the second line but the Plain SHA in the third
meant that when the HMAC files was used once it parsed the third
line Plain SHA was set as the algo and not HMAC.
USER1: Failed to get capability for cdev 0
USER1: Error -22: test block
[L=20 SHAAlg=SHA_2]
USER1: Error -22: Failed test /root/FIPS/HMAC/req/HMAC.req
Fixes: f4797bae0050 ("examples/fips_validation: support plain SHA")
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Mellanox BlueField is armv8 CPU having cortex-a72. The implementor ID is
0x41 (arm) and the primary part number is 0xd08 (cortex-a72).
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Current default cache line size for armv8 CPUs having Implementor ID of
0x41 is 128 bytes, changing it to 64 bytes. Also, the max number of lcores
is changed to 16 from 256.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
If MLNX_OFED is installed, there's no .pc file installed for libraries and
dependency() can't find libraries by pkg-config. By adding fallback of
using cc.find_library(), libraries are properly located.
Fixes: e30b4e566f47 ("build: improve dependency handling")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Disable octeontx for gcc 4.8.5 as compiler is emitting "internal compiler
error" for aarch64
Fixes: bd77f2d64c44 ("event/octeontx: build with meson")
Fixes: 4f760550a093 ("mk: disable OcteonTx for buggy compilers")
Fixes: f3af3e44a444 ("mk: disable OcteonTx for buggy compilers only on arm64")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Document the new value, as it's useful for distributions and users
who need to use a stable baseline -march
Signed-off-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
When building for generic distribution we need a stable baseline
architecture, or depending on the build worker the result will vary.
Force the default flags if the user explicitly sets machine=default
at configuration time.
Fixes: b1d48c41189a ("build: support ARM with meson")
Cc: stable@dpdk.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add a function to the timer API that allows a caller to traverse a
specified set of timer lists, stopping each timer in each list,
and invoking a callback function.
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Currently, the timer library uses a per-process table of structures to
manage skiplists of timers presumably because timers contain arbitrary
function pointers whose value may not resolve properly in other
processes.
However, if the same callback is used handle all timers, and that
callback is only invoked in one process, then it woud be safe to allow
the data structures to be allocated in shared memory, and to allow
secondary processes to modify the timer lists. This would let timers be
used in more multi-process scenarios.
The library's global variables are wrapped with a struct, and an array
of these structures is created in shared memory. The original APIs
are updated to reference the zeroth entry in the array. This maintains
the original behavior for both primary and secondary processes since
the set intersection of their coremasks should be empty [1]. New APIs
are introduced to enable the allocation/deallocation of other entries
in the array.
New variants of the APIs used to start and stop timers are introduced;
they allow a caller to specify which array entry should be used to
locate the timer list to insert into or delete from.
Finally, a new variant of rte_timer_manage() is introduced, which
allows a caller to specify which array entry should be used to locate
the timer lists to process; it can also process multiple timer lists per
invocation.
[1] https://doc.dpdk.org/guides/prog_guide/multi_proc_support.html#multi-process-limitations
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
These APIs are available in DPDK for last 4 releases
and used by multiple drivers.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
The definition of CPU_AND differs from Linux to BSD, so we need to use
RTE_CPU_AND instead.
Fixes: f6baccbc2b3b ("examples/l2fwd-cat: add sample application for PQoS CAT and CDP")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The power library is not built on non-Linux systems, so skip the
distributor sample if it's not found, as it's a mandatory dependency.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: David Hunt <david.hunt@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Define variables for "is_linux", "is_freebsd" and "is_windows"
to make the code shorter for comparisons and more readable.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
