The 'register' keyword does nothing, and has been removed in C++17.
Remove it for compatibility, like following commit:
Fixes: 0d5f2ed12f ("eal: remove use of register keyword")
Signed-off-by: Avi Kivity <avi@scylladb.com>
Mempool creation needs to be completed first before notifying mempool to
register the mempool area.
Fixes: 12b8cc1a7e ("mempool: notify memory area to pool")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Compiling on ARM BE using Linaro toolchain caused following
error/warnings.
rte_lpm.c: In function ‘add_depth_big_v20’:
rte_lpm.c:911:4: error: braces around scalar initializer [-Werror]
{ .group_idx = (uint8_t)tbl8_group_index, },
^
rte_lpm.c:911:4: note: (near initialization for
‘new_tbl24_entry.depth’)
rte_lpm.c:911:6:error: field name not in record or union initializer
{ .group_idx = (uint8_t)tbl8_group_index, },
^
rte_lpm.c:911:6: note: (near initialization for
‘new_tbl24_entry.depth’)
rte_lpm.c:914:13: error: initialized field overwritten
[-Werror=override-init]
.depth = 0,
Fixes: dc81ebbaca ("lpm: extend IPv4 next hop field")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
rte_eal_check_module() might return -1, which would have been a
"not false" condition for mod_available. Fix that to only report
vfio being enabled if rte_eal_check_module() returns 1.
Fixes: 221f7c220d ("vfio: move global config out of PCI files")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
In cases when alignment is bigger than boundary, we may incorrectly
calculate end of a bounded malloc element.
Consider this: suppose we are allocating a bounded malloc element
that should be of 128 bytes in size, bounded to 128 bytes and
aligned on a 256-byte boundary. Suppose our malloc element ends
at 0x140 - that is, 256 plus one cacheline.
So, right at the start, we are aligning our new_data_start to
include the required element size, and to be aligned on a specified
boundary - so new_data_start becomes 0. This fails the following
bounds check, because our element cannot go above 128 bytes from
the start, and we are at 320. So, we enter the bounds handling
branch.
While we're in there, we are aligning end_pt to our boundedness
requirement of 128 byte, and end up with 0x100 (since 256 is
128-byte aligned). We recalculate new_data_size and it stays at
0, however our end is at 0x100, which is beyond the 128 byte
boundary, and we report inability to reserve a bounded element
when we could have.
This patch adds an end_pt recalculation after new_data_start
adjustment - we already know that size <= bound, so we can do it
safely - and we then correctly report that we can, in fact, try
using this element for bounded malloc allocation.
Fixes: fafcc11985 ("mem: rework memzone to be allocated by malloc")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
When we're gathering statistics, we are traversing the freelist,
which may change under our feet in multithreaded scenario. This
is verified by occasional segfaults when running malloc autotest
on a machine with big amount of cores.
This patch protects malloc heap stats call with a lock. It changes
its definition in the process due to locking invalidating the
const-ness, but this isn't a public API, so that's OK.
Fixes: 2a5c356e17 ("memory: stats for malloc")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
We check if there's space in config after we allocated the memzone,
but if there isn't, we never free it back. This patch adds memzone
free if there's no room in memzone config.
Fixes: ff909fe21f ("mem: introduce memzone freeing")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
This commit adds a new attribute to the service cores attributes
API, which allows the application to retrieve the number of times
that a service-core called the service to perform its action.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
This commit introduces a new API, allowing the application to
reset attributes of a service like the cycle count. Given this
functionality is now exposed to the user, remove the resetting
of stats during a dump() call.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
This commit adds a new function to the service API to allow
the application to retrieve items about each individual service
in the system. A unit test checks the return values of a variety
of invalid and valid calls.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
The CPUID instruction is caught by hypervisor which can return
a flag indicating one is running, and its name.
Suggested-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Print a warning if the --base-virtaddr hint is not respected
since this might lead to problems when mapping memory in
the secondary process.
Signed-off-by: Jonas Pfefferle <jpf@zurich.ibm.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Update rte_mbuf_sanity_check() to check sanity of data_len and pkt_len
fields. For segmented packets it is supposed that head's pkt_len field
should be the sum of all segments data_len values.
Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
There is no reason to have local variable m2.
Fixes: af75078fec ("first public release")
Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
rename private header file rte_power_kvm_vm.c
to power_kvm_vm.c. This prevents the private
functions from leaking into the documentation.
Change any private functions from
rte_<function_name> to just <function_name>.
Reserve the rte_ for public functions
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Rename private header file rte_power_acpi_cpufreq.c
to power_acpi_cpufreq.c.This prevents the private
functions from leaking into the documentation.
Change any private functions from rte_<function_name>
to just <function_name>.Reserve the rte_ for public functions.
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Rename private header file rte_power_common.h
to power_common.h to prevent private functions
from leaking into the documentation.
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Since this patch-set attempts to clean up the power library,
and there are many instances of "unsigned" caught by checkpatch,
it was decided to clean these up first rather than have them included
in the later patches in the patch set. And would also minimise this
type of error being caught by checkpatch in the future
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
This patch fixes a potential bug, which was not consistently
showing up in the unit tests. The issue was that the service-
lcore being started was not in a "WAIT" state, and hence EAL
would return -EBUSY instead of launching the lcore.
In order to ensure a core is in a launch-ready state, the application
must call rte_eal_wait_lcore, to ensure that the core has completed
its previous task, and that EAL is ready to re-launch it.
The call to rte_eal_wait_lcore() is explicitly not in the
service core function, to make it visible to the application.
Requiring an explicit function call ensures the developer sees
that a lcore could block in the rte_eal_wait_lcore() function
if the core hasn't returned from its previous function.
From a usability perspective, hiding the wait_lcore() inside
service cores would cause confusion.
This patch adds rte_eal_wait_lcore() calls to the unit tests,
to ensure that the lcores for testing functionality are ready
to run the test.
Fixes: 21698354c8 ("service: introduce service cores concept")
Cc: stable@dpdk.org
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
This patch fixes the reset of the service core,
that when rte_service_lcore_del() is called, the
lcore_role is restored to RTE.
This issue was reported as when running the unit tests, an
error was thrown that "failed to allocate lcore". Investigating
revealed that the state of the service-cores after del() was
not allowing a core to be re-used at a later point in time.
Fixes: 21698354c8 ("service: introduce service cores concept")
Cc: stable@dpdk.org
Reported-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
When adding service the number of mapped cores should only be incremented
when the core is not already a service core or vice versa.
Fixes: 21698354c8 ("service: introduce service cores concept")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This patch adds a framework that allows GRO on tunneled packets.
Furthermore, it leverages that framework to provide GRO support for
VxLAN-encapsulated packets. Supported VxLAN packets must have an outer
IPv4 header, and contain an inner TCP/IPv4 packet.
VxLAN GRO doesn't check if input packets have correct checksums and
doesn't update checksums for output packets. Additionally, it assumes
the packets are complete (i.e., MF==0 && frag_off==0), when IP
fragmentation is possible (i.e., DF==0).
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Junjie Chen <junjie.j.chen@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
This patch complies RFC 6864 to process IPv4 ID fields. Specifically, GRO
ingores IPv4 ID fields for the packets whose DF bit is 1, and checks IPv4
ID fields for the packets whose DF bit is 0.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Junjie Chen <junjie.j.chen@intel.com>
This patch updates codes as follows:
- change appropriate names for internal structures, variants and functions
- update comments and the content of the gro programmer guide for better
understanding
- remove needless check and redundant comments
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Junjie Chen <junjie.j.chen@intel.com>
This patch removes table id parameter from all the flow
classify apis to reduce the complexity alongwith some code
cleanup.
The validate api is exposed as public api to allow user
to validate the flow before adding it to the classifier.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
kni library has a dependency to new PCI library, adding that dependency.
build error:
CC rte_kni.o
In file included from dpdk/lib/librte_kni/rte_kni.c:48:0:
dpdk/build/include/rte_kni.h:49:21:
fatal error: rte_pci.h: No such file or directory
#include <rte_pci.h>
^
Fixes: c752998b5e ("pci: introduce library and driver")
Cc: stable@dpdk.org
Reported-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Repeated occurrences of 'the'.
The change was obtained using the following command:
sed -i "s;the the ;the ;" `git grep -l "the "`
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
mmap(2) returns MAP_FAILED, not NULL, on failure.
Signed-off-by: Michael McConville <mmcco@mykolab.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
include <sys/vmmeter.h> to fix build
otherwise the build fails with FreeBSD 12, like
In file included from contigmem.c:57:
/usr/srcs/head/src/sys/vm/vm_phys.h:122:10: error:
use of undeclared identifier 'vm_cnt'
return (vm_cnt.v_free_count += adj);
^
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Update RTE_VERIFY macro to make it possible to use complex expressions
in RTE_ASSERT.
Now it’s possible to have % char inside the expression, for example:
RTE_ASSERT((sizeof(some_struct) % 64) == 0)
Before the patch, “%" sign acts like a conversion specification
beginning character.
Fixes: 148f963fb5 ("xen: core library changes")
Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
build error:
.../dpdk/build/build/lib/librte_eal/linuxapp/kni/igb_main.c:2809:2:
error: implicit declaration of function ‘setup_timer’;
did you mean ‘sk_stop_timer’? [-Werror=implicit-function-declaration]
setup_timer(&adapter->watchdog_timer, &igb_watchdog,
^~~~~~~~~~~
sk_stop_timer
cc1: all warnings being treated as errors
error observed whed CONFIG_RTE_KNI_KMOD_ETHTOOL config option enabled.
Because Linux removed setup_timer macros for kernel version >= 4.15
Linux: 513ae785c63c ("timer: Remove setup_*timer() interface")
Replaced setup_timer with timer_setup for new kernel versions.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Fixes: 278f945402 ("pdump: add new library for packet capture")
Signed-off-by: Maria Lingemark <maria.lingemark@ericsson.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Update types of variables to correspond to nb_segs type change from
uint8_t to uint16_t.
Fixes: 97cb466d65 ("mbuf: use 2 bytes for port and nb segments")
Cc: stable@dpdk.org
Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
We watched a rte panic of mbuf_autotest in our qualcomm arm64 server
(Amberwing).
Root cause:
In __rte_ring_move_cons_head()
...
do {
/* Restore n as it may change every loop */
n = max;
*old_head = r->cons.head; //1st load
const uint32_t prod_tail = r->prod.tail; //2nd load
In weak memory order architectures (powerpc,arm), the 2nd load might be
reodered before the 1st load, that makes *entries is bigger than we wanted.
This nasty reording messed enque/deque up.
cpu1(producer) cpu2(consumer) cpu3(consumer)
load r->prod.tail
in enqueue:
load r->cons.tail
load r->prod.head
store r->prod.tail
load r->cons.head
load r->prod.tail
...
store r->cons.{head,tail}
load r->cons.head
Then, r->cons.head will be bigger than prod_tail, then make *entries very
big and the consumer will go forward incorrectly.
After this patch, the old cons.head will be recaculated after failure of
rte_atomic32_cmpset
There is no such issue on X86, because X86 is strong memory order model.
But rte_smp_rmb() doesn't have impact on runtime performance on X86, so
keep the same code without architectures specific concerns.
Fixes: 50d7690548 ("ring: add burst API")
Cc: stable@dpdk.org
Signed-off-by: Jia He <jia.he@hxt-semitech.com>
Signed-off-by: Jie Liu <jie2.liu@hxt-semitech.com>
Signed-off-by: Bing Zhao <bing.zhao@hxt-semitech.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Jianbo Liu <jianbo.liu@arm.com>
If pdump_pktmbuf_copy_data() fails it's possible to have segment leak
as rte_pktmbuf_free() only handles m_dup chain but not the seg just
allocated and yet not chained.
Fixes: 278f945402 ("pdump: add new library for packet capture")
Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
