Added a debug function to print enic filters and actions when
rte_validate_flow is called. Compiled in CONFIG_RTE_LIBRTE_ENIC_DEBUG_FLOW
is enabled and log level is INFO.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
5-tuple exact Flow support for 1200 series adapters. This allows:
Attributes: ingress
Items: ipv4, ipv6, udp, tcp (must exactly match src/dst IP
addresses and ports and all must be specified).
Actions: queue and void
Selectors: 'is'
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
Flow support for 1300 series adapters with the 'Advanced Filter'
mode disabled via the UCS management interface. This allows:
Attributes: ingress
Items: Outer eth, ipv4, ipv6, udp, sctp, tcp, vxlan. Inner eth, ipv4,
ipv6, udp, tcp.
Actions: queue and void
Selectors: 'is', 'spec' and 'mask'. 'last' is not supported
With advanced filters disabled, an IPv4 or IPv6 item must be specified
in the pattern.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
For VICs with filter tagging, support the MARK and FLAG actions
by setting appropriate mbuf ol_flags if there is a filter match.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
Flow support for 1300 series adapters with the 'Advanced Filter'
mode enabled via the UCS management interface. This enables:
Attributes: ingress
Items: Outer eth, ipv4, ipv6, udp, sctp, tcp, vxlan. Inner eth, ipv4,
ipv6, udp, tcp.
Actions: queue, and void
Selectors: 'is', 'spec' and 'mask'. 'last' is not supported
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
Stub callbacks for the generic flow API and a new FLOW debug define.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
Update the base functions for the Cisco VIC. These files are mostly
common with other VIC drivers so are left alone is as much as possible.
Includes in a new filter/action interface which is needed for Generic
Flow API PMD support. Update FDIR code to use the new interface.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
Unfortunately the datasheet has a mistake. The
address of the TX error counter is wrong.
Fixes: 8db9e2a1b2 ("i40e: base driver")
CC: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
i210 and i211 also support unicast MAC filters.
The patch was tested on i210 based hw, for i211
support was looked up in the specs.
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Previously, the FDIR programming time is +11ms on i40e.
This patch will result in an average programming time of
22usec with a max of 60usec .
Signed-off-by: Michael Lilja <ml@napatech.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Coverity issue: 144512
Coverity issue: 144513
Fixes: 9c7188a68d ("net/ark: provide API for hardware modules pktchkr and pktgen")
Cc: stable@dpdk.org
Signed-off-by: John Miller <john.miller@atomicrules.com>
Instead of many PMD define their own macro, define a generic one in
ethdev and use that in PMDs.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
remove __rte_unused instances that are not required.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Check for the current MAC address on both the remote and the tap
netdevices before setting a new value.
While there, remove wrong empty lines and ensure tap_ioctl() return
value is negative, just like what is done throughout this code.
Fixes: 2bc06869cd ("net/tap: add remote netdevice traffic capture")
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
This has three main benefits:
- tun_alloc is now generic again for any queue,
- mtu no longer needs to be handled in tap_setup_queue(),
- an actual netdevice is created as soon as the device is probed.
On top of it, code in eth_dev_tap_create() has been reworked to have a
more logical behavior; initialization can now fail if a remote is
requested but cannot be set up.
Fixes: 2bc06869cd ("net/tap: add remote netdevice traffic capture")
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Print a detailed debug message inside tap_ioctl() directly. The caller
now only needs to check for return value.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Support for a fixed MAC address for testing with the last octet
incrementing by one for each interface defined with the new 'mac=fixed'
string on the --vdev option. The default option is still to randomize
the MAC address for each tap interface.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
mbuf next and nb_segs fields already have the default values when get
from mempool, no need to update them in PMD.
See: 8f094a9ac5 ("mbuf: set mbuf fields while in pool")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
See: 8f094a9ac5 ("mbuf: set mbuf fields while in pool")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The thunderx PMD is sensitive to the layout of the mbuf on
the RX path. Add in some compile-time checks to make sure the mbuf layout
assumptions are valid, and to provide hints to anyone changing the mbuf
where things may need to be updated.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The vector PMD is very sensitive to the layout of the mbuf, especially on
the RX path. Add in some compile-time checks to make sure the mbuf layout
assumptions are valid, and to provide hints to anyone changing the mbuf
where things may need to be updated.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The vector PMD is very sensitive to the layout of the mbuf, especially on
the RX path. Add in some compile-time checks to make sure the mbuf layout
assumptions are valid, and to provide hints to anyone changing the mbuf
where things may need to be updated.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The vector PMD is very sensitive to the layout of the mbuf, especially on
the RX path. Add in some compile-time checks to make sure the mbuf layout
assumptions are valid, and to provide hints to anyone changing the mbuf
where things may need to be updated.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Currently, 'rte_eth_dev_get_port_by_name' changes transmitted
'port_id' unconditionally. This is undocumented and misleading
behaviour as user may expect unchanged value in case of error.
Otherwise, there is no sense having both return value and
a pointer in the function.
Fixes: 9c5b8d8b9f ("ethdev: clean port id retrieval when attaching")
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
This commit adds TCP flags support in flow API as
some drivers have SYN filter.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Application fails to create NVGRE and E-Tag flows with
current configuration, this commit fixes the issue by
adding flow items for E_TAG and NVGRE.
Fixes: e4840ef268 ("ethdev: fix incomplete items in flow API")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Different drivers use internal macros like force_inline for compiler
always inline feature.
Standardizing it through __rte_always_inline macro.
Verified the change by comparing the output binary file.
No difference found in the output binary file with this change.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Checking against VFIO_MAX_GROUPS goes beyond the maximum array
index which should be (VFIO_MAX_GROUPS - 1).
Coverity issue: 144555, 144556, 144557
Fixes: 94c0776b1b ("support hotplug")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
vfio is the kernel framework used by the vfio-pci kernel driver.
DPDK drivers do not rely solely on vfio, but rather on vfio-pci to gain
access to pci resources.
Fixes: 0880c40113 ("drivers: advertise kmod dependencies in pmdinfo")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
If the socket_id is invalid (e.g. -2, -3), the
memzone_reserve_aligned_thread_unsafe should return the
EINVAL and not ENOMEM. To avoid it, we should check the
socket_id before calling malloc_heap_alloc.
Signed-off-by: Tonghao Zhang <nic@opencloud.tech>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Fixes memory access errors detected by Coverity.
All cases are the maximum permissable value causing an
out-by-one overrun.
Coverity issue: 143433, 143434, 143460, 143464
Fixes: 349950ddb9 ("metrics: add information metrics library")
Signed-off-by: Remy Horton <remy.horton@intel.com>
When rte_lpm.h is used on x86, -O0 option (no optimization at all)
given to gcc causes a compile error like this:
error: the last argument must be an 8-bit immediate
i24 = _mm_srli_si128(i24, sizeof(uint64_t));
-O0 option is useful for debugging and code coverage measurement, but
this error prevents DPDK programs from building. This patch replaces
"sizeof(uint64_t)" with a constant literal "8" to work around the issue.
The issue occurs on gcc/g++ versions from 4.8 to 5.
Signed-off-by: Sangjin Han <sangjin@eecs.berkeley.edu>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Fixing the below error by returning from the function early
when count == 0.
Issue flagged by GCC 7.1.1
examples/vhost/virtio_net.c:370:38: error: ‘desc_indexes[0]’ may be used
uninitialized in this function [-Werror=maybe-uninitialized]
rte_prefetch0(&vr->desc[desc_indexes[0]]);
Fixes: ca059fa5e2 ("examples/vhost: demonstrate the new generic APIs")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This one is more of a compiler issue as application
checks the app_parse_opt_vals() return value.
Since this code is in slow path, adding a memset
to fix following "maybe-uninitialized" warning.
qos_sched/args.c: In function ‘app_parse_args’:
examples/qos_sched/args.c:254:32: error: ‘vals[0]’ may be
used uninitialized in this function [-Werror=maybe-uninitialized]
pconf->rx_port = (uint8_t)vals[0];
~~~~^~~
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
