Replace rte_intr_enable() with rte_intr_ack() API
for acking an interrupt in interrupt handlers and
rx_queue_intr_enable() callbacks of PMD's.
This is inline with original intent of this change in PMDs
to ack interrupts after handling is completed if
device is backed by UIO, IGB_UIO or VFIO(with INTx).
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Shahed Shaikh <shshaikh@marvell.com>
Tested-by: Shahed Shaikh <shshaikh@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Set RTE_ETH_DEV_CLOSE_REMOVE upon probe so all the resources
for the port can be freed by rte_eth_dev_close() and the ethdev
port freed.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
PCI device may be unplugged when ethdev is not closed yet.
Fixes: aaa3f5f0f7 ("net/sfc: add configure and close stubs")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
For each driver where we optionally disable it, add in the reason why it's
being disabled, so the user knows how to fix it.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Implement the efx_proxy_auth_privilege_mask_get() to get a function's
privilege mask and efx_proxy_auth_privilege_modify() to add/remove
privileges for a function specified by PF and VF index.
Signed-off-by: Gautam Dawar <gdawar@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Hypervisor should be able to track VF statistics.
Signed-off-by: Gautam Dawar <gdawar@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Implement functions to set vPort VLAN and MAC address and reset the vPort.
Signed-off-by: Gautam Dawar <gdawar@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Implement the APIs for PROXY_CMD, PROXY_COMPLETE and PRIVILEGE_MASK
messages to allow client drivers authorize VF operations like set MAC,
set MTU etc. with firmware.
Signed-off-by: Gautam Dawar <gdawar@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add the capability to receive MCDI proxy event from firmware and
invoke the client driver registered function to handle it.
Signed-off-by: Gautam Dawar <gdawar@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
VMware expects that certain kind of configurations made on the VFs are
authorized by the ESXi before these are applied e.g. assigning a MAC
address to the VF, setting MTU etc. Firmware supports a feature called
MCDI proxy which will be used to implement this authorization check.
The proxy auth module is governed by EFSYS_OPT_MCDI_PROXY_AUTH switch.
This patch adds the framework for proxy auth module along with the APIs
required for SR-IOV initialization.
Signed-off-by: Gautam Dawar <gdawar@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
ef10_nic_init() allocates a vAdaptor for the physical port in current
flow. In case of SR-IOV, this vAdaptor must be created for the PF as the
vSwitch is allocated on the physical port. So, the call to
efx_mcdi_vadaptor_alloc() should be avoided in ef10_nic_init() in SR-IOV
flow. To achieve this, for SR-IOV use case, the vSwitch is created
before NIC initialization and its handle is used to prevent vAdaptor
allocation in ef10_nic_init(). This approach has been taken to minimize
the changes in NIC initialization flow.
This is also the case with Linux driver where vSwitch creation happens
before NIC initialization.
Also, when DMA queues need to be allocated for Tx/Rx functionality
(MC_CMD_INIT_RXQ / MC_CMD_INIT_TXQ), the correct vPort is selected
based on efx_vswitch_t property of efx_nic_t structure - vport
corresponding to PF in case of SR-IOV use case and EVB_PORT_ID_ASSIGNED
for physical port.
Signed-off-by: Gautam Dawar <gdawar@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Separate out vAdaptor allocation from ef10_nic_init() as it is not
required for SR-IOV use case. In case of SR-IOV, vAdaptor is allocated
early along with vSwitch creation and vPort configuration.
Signed-off-by: Gautam Dawar <gdawar@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The vSwitch create API takes an array of num_vports client driver
allocated vPort config entries where entry at index 0 contains the PF
configuration and rest num_vports-1 entries refer to vPort configuration
for VFs 0 to (num_vports-2). The required hierarchy
(vswitch/vport/vadaptor) is created within this API. The destroy API
tears down this hierarchy and releases memory for the vSwitch object.
Signed-off-by: Gautam Dawar <gdawar@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Implement functions to allocate and free vSwitch, vPort and vAdaptor.
Also, implement functions to add and delete vPort MAC address and EVB
port assign.
Most of the efx_evb_ops_t functions take vSwitch ID as a parameter for
future enhancements. Currently, firmware doesn't implement vSwitch
identifier and hence this parameter is unused for EF10 architecture
implementation.
Signed-off-by: Gautam Dawar <gdawar@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add the functions to implement the vPort and vSwitch MCDI calls.
Signed-off-by: Gautam Dawar <gdawar@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Implement the framework for Enterprise Virtual Briding (EVB) module.
SR-IOV augments the software virtual switch with NIC capabilities
supported from EVB module.
Further patches will add APIs to create and destroy EVB switching
hierarchy required for SR-IOV and APIs to set vPort properties like MAC,
VLAN etc.
Signed-off-by: Gautam Dawar <gdawar@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Proxy authorization module for SR-IOV requires one instance of proxy
data structures per card. In order to achieve this, proxy data
structures will be allocated only for primary port (port id 0) and other
secondary ports in the card will access those data structures through
reference to primary port. Accordingly, the port number obtained from
efx_mcdi_get_port_assignment is stored in NIC configuration as
enc_mcdi_port.
Signed-off-by: Gautam Dawar <gdawar@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Allows to enable additional functionality related to this OEM
(e.g. vendor extensions to VPD, NC-SI etc.)
Signed-off-by: Kevin Lampis <klampis@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Request firmware updates be performed in background mode.
In this mode MCDI to the function processing the update
remains accessible and the client polls for completion.
This is supported for lengthy partition updates such as
MCFW and bundles. The MC ignores the flags used for this
mode for other partition updates.
Signed-off-by: Richard Houldsworth <rhouldsworth@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Old NVRAM info API required function prototype too often.
Signed-off-by: Richard Houldsworth <rhouldsworth@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
All signed images other than for the MCFW partition should
be written fully to the partition with no rearrangement.
Signed-off-by: Richard Houldsworth <rhouldsworth@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add definitions header for reflash header IDs. This is required to
support different handling modes for signed firmware images.
Signed-off-by: Richard Houldsworth <rhouldsworth@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add function to query partition characteristics.
Refactor efx_nvram_size to share implementation.
Signed-off-by: Richard Houldsworth <rhouldsworth@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Includes the partition read-only flag, to allow for
checks before opening the partition.
Signed-off-by: Richard Houldsworth <rhouldsworth@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Support the registration of a version string by the libefx
client. The string is passed on to the MC in efx_nic_probe
only to allow the MC to advertise the OS driver version in
NC-SI, and the content is considered opaque for libefx.
Signed-off-by: Richard Houldsworth <rhouldsworth@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Types defined in efx_types.h are used in efx.h and it is better do
not rely on the header inclusion from somewhere else (typically from
efsys.h).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add more comments to simplify code reading and understanding.
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
This was probably an oversight when support for multiple sensor pages
was added.
Despite being undefined behaviour in C, it probably worked on Intel
x32/x64 as on them bit shift operations wrap round.
Fixes: dfb3b1ce15 ("net/sfc/base: import monitors access via MCDI")
Cc: stable@dpdk.org
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Use UINT32_MAX instead of assigning -1 to a uint32_t variable to
resolve "conversion from 'int' to 'uint32_t', signed/unsigned mismatch"
errors produced by the Visual Studio 2017 toolchain [with the default
/W4 /WX C compiler options which set warning level 4 and treat warnings
as errors].
Fixes: 107cf1d792 ("net/sfc/base: move limits config to ef10 NIC board config")
Cc: stable@dpdk.org
Signed-off-by: Andrew Lee <alee@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Set WORKAROUND_BUG26807 which does the job.
Fix the misunderstanding in the Medford code: i.e. the workaround is
always supported by firmware, but the driver still needs to enable it.
Also, as it now applies to all EF10 controllers, the implementation is
moved to EF10 common place.
Fixes: 94190e3543 ("net/sfc/base: import SFN8xxx family support")
Fixes: 2b38e7b7b7 ("net/sfc/base: add Medford2 support to NIC module")
Cc: stable@dpdk.org
Signed-off-by: Gautam Dawar <gdawar@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Similar to support for efx datapath, Rx interrupt disabling
just avoids rearming the next time.
Signed-off-by: Georgiy Levashov <georgiy.levashov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
When Rx interrupts are disabled, we simply disable rearm when
the interrupt fires the next time. So, the next packet will
trigger interrupt (if it is not happened yet after previous Rx
burst processing).
Signed-off-by: Georgiy Levashov <georgiy.levashov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tx datapath feature bits were useful on migration from the old offload API
to the new one. However, right now it just adds indirection which
complicates code reading and understanding. Also addition of a new
offloads requires addition of a new feature bits and makes patches longer
and harder to understand. So, remove feature bits which correspond to Tx
offloads and simply advertise device and per-queue offloads directly.
Generic code could still mask some offloads if running HW or FW does not
support it.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Rx datapath feature bits were useful on migration from the old offload API
to the new one. However, right now it just adds indirection which
complicates code reading and understanding. Also addition of a new
offloads requires addition of a new feature bits and makes patches longer
and harder to understand. So, remove feature bits which correspond to Rx
offloads and simply advertise device and per-queue offloads directly.
Generic code could still mask some offloads if running HW or FW does not
support it.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Rx queue setup function checks configured MTU to make sure that
no oversized packets can be received. But a following call to
set MTU function might make this check irrelevant.
Add a function to check MTU size against Rx buffer size and
additional Rx queue info, including Rx scatter offload.
Fixes: e961cf425e ("net/sfc: support MTU change")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
As stated in the deprecation notice from December 2016,
"the legacy filter API, including rte_eth_dev_filter_supported(),
rte_eth_dev_filter_ctrl() as well as filter types MACVLAN, ETHERTYPE,
FLEXIBLE, SYN, NTUPLE, TUNNEL, FDIR, HASH and L2_TUNNEL, is superseded
by the generic flow API (rte_flow)".
After a long wait of more than two years, the legacy filter API
is marked as deprecated, while still tested with testpmd and
the tep_termination example.
The next step will be to announce a deadline for complete removal.
As preparation of the removal of rte_eth_ctrl.h,
RTE_ETH_FLOW_*, RTE_TUNNEL_TYPE_* and RTE_ETH_HASH_FUNCTION_* definitions
are moved to rte_ethdev.h and rte_flow.h.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Rx refill in one bulk (which is just 8 descriptors) by default is too
aggressive and makes too many MMIO writes (Rx doorbells) if packet rate
is high. Setting default to 1/8 of Rx descriptors number shows good
performance results. Anyway it is a default value which may be
overridden by Rx configuration provided by application.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Handle VXLAN and GENEVE TSO on EF10 native Tx datapath.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Said message cannot be considered as warning since
the PMD anyway reports available offload capabilities
by means of device info interface. Make this log
message informational and improve its formatting
by placing the text itself on the same line.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
As a result, code duplication will be avoided in the current
TSO implementations (EFX and EF10 native). The future patch to
add support for tunnel TSO will also reuse the new function.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Make Tx prepare function able to detect packets with invalid header
size when header linearization is required.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
