Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Rx queue setup function checks configured MTU to make sure that
no oversized packets can be received. But a following call to
set MTU function might make this check irrelevant.
Add a function to check MTU size against Rx buffer size and
additional Rx queue info, including Rx scatter offload.
Fixes: e961cf425e ("net/sfc: support MTU change")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Implement generic checks in Tx prepare function and update Tx burst
function accordingly.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Phy capabilities are bit offsets in libefx, but was used as bit masks.
Fixes: d23f3a89ab ("net/sfc: support link speed and duplex settings")
Fixes: f82e33afbb ("net/sfc: support link speeds up to 100G")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Descriptor limits are not common for all NIC families. Use the variables
from NIC configuration instead of deprecated defines.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Min limit is not common for all NIC families. Use the variable from
NIC configuration instead of deprecated define.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
RSS get requests are supported in secondary process.
Prepare to make sfc_adapter primary process private data.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Logging should be supported in secondary process and now we have
everything required to share at least main logging macro.
sfc_adapter is going to become primary process only.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
sfc_adapter structure will become primary process only private data.
Start to factor out shared data into dedicated structure which will
become separate structure finally.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
libefx is not multi-process aware and all related structures
should be moved to primary process only.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
libefx is not multi-process aware and all related structures
should be moved to primary process only.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
RSS RETA query and hash configuration get functions use shared
adapter data only. No libefx functions are called.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
If Tx datapath supports multi-process, secondary process should be
able to use Tx descriptor status API.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
If datapath supports multi-process, it should be possible to get
its TxQ structure by the queue index.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
If Rx datapath supports multi-process, secondary process should be
able to use Rx descriptor status and related API.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
If datapath supports multi-process, it should be possible to get
its RxQ structure by the queue index.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Secondary process needs to know RxQ state.
RxQ control structure will become primary process private.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The change is required to support datapath-dependent device operations
for secondary process. It is just a step in the direction.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Rx and Tx datapath ops should be stored in process private
data since these structures are located in the data section
(not allocated from shared memory).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
These wrappers are used in single place and just complicate reading
and understanding if these ops could be supported in secondary process.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
TxQ control structure contains primary process only data and will become
primary process only. TxQ info get is supported in secondary process.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
RxQ control structure contains primary process only data and will
become primary process only. RxQ info get is supported in secondary
process.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Dynamic log type value may differ in different processes.
Fixes: f28ede500c ("net/sfc: support multi-process")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Rx queue count may be used from data core and it should not
generate control path logs.
Fixes: 04aa6b9c5f ("net/sfc: get RxQ pending descriptors count")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Errors, missed and pauses should not be included in delivered
good Rx packets reported by ipackets.
Fixes: 1caab2f1e6 ("net/sfc: add basic statistics")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Rx and Tx datapath references were mixed up in a couple
of log statements and commentary blocks in the original
commit. Correct datapath name references in said places.
Fixes: f28ede500c ("net/sfc: support multi-process")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
VADAPTER_RX_OVERFLOW means Rx statistics overflow, not a missed
packet because of overflow.
VADAPTER_RX_BAD_PACKETS accumulates a number of error conditions,
but mainly impossibility to deliver because of no descriptors
available, so it is better to classify it as imissed.
Fixes: 1caab2f1e6 ("net/sfc: add basic statistics")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
This is a clean-up of common ethdev data freeing.
All data freeing are moved to rte_eth_dev_release_port()
and done only in case of primary process.
It is probably fixing some memory leaks for PMDs which were
not freeing all data.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
If global RSS is not enabled in the multiqueue mode setting,
it will not be possible to change RSS configuration. However,
querying default RSS settings should be possible in any case since
it may be needed by RTE flow API users to find out what RSS settings
will be used by default for a flow rule with RSS action if custom
RSS key and hash function choice are not specified.
Fixes: 63ab5e0c8f ("net/sfc: use zero RSS channels as disabled RSS indicator")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Isolated mode prevents global RSS from being enabled and configured.
However, an application may need to query default RSS key and hash
functions when a flow rule with RSS action is added which does not
contain custom RSS key or hash function choice. In this case
global RSS key and hash functions will be used to handle the rule,
and there should be some way for the application to query these
global default settings to clarify expectations on the traffic
distribution.
Fixes: 84a9b48128 ("net/sfc: support flow API isolated mode")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
There are two function that call sfc_tx_qfini():
sfc_tx_fini_queues() and sfc_tx_queue_release(). But only
sfc_tx_queue_release() sets tx_queues pointer of the device data to NULL.
It may lead to the scenario in which a queue is destroyed by
sfc_tx_fini_queues() and after the queue is attempted to be destroyed again
by sfc_tx_queue_release().
Move NULL assignment to sfc_tx_qfini().
Fixes: b1b7ad933b ("net/sfc: set up and release Tx queues")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
There are two function that call sfc_rx_qfini():
sfc_rx_fini_queues() and sfc_rx_queue_release(). But only
sfc_rx_queue_release() sets rx_queues pointer of the device data to NULL.
It may lead to the scenario in which a queue is destroyed by
sfc_rx_fini_queues() and after the queue is attempted to be destroyed again
by sfc_rx_queue_release().
Move NULL assignment to sfc_rx_qfini().
Fixes: ce35b05c63 ("net/sfc: implement Rx queue setup release operations")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Return value equal to zero means success and really expected.
Fixes: 0fa0070e43 ("net/sfc: support multicast addresses list controls")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
CRC_STRIP offload is always enabled, but lost here.
It is more robust to use device level offloads directly to
compose returned value.
Fixes: ff6a1197c3 ("net/sfc: convert to new Rx offload API")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
A constructor is usually declared with RTE_INIT* macros.
As it is a static function, no need to declare before its definition.
The macro is used directly in the function definition.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
In DPDK 17.11, the ethdev offloads API has changed:
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
The new API is documented in the programmer's guide:
http://doc.dpdk.org/guides/prog_guide/poll_mode_drv.html#hardware-offload
For reminder, the main concepts in the new API were:
- All offloads are disabled by default
- Distinction between per port and per queue offloads.
The transition bits are now removed:
- Translation of the old API in ethdev
- rte_eth_conf.rxmode.ignore_offload_bitfield
- ETH_TXQ_FLAGS_IGNORE
The old API bits are now removed:
- Rx per-port rte_eth_conf.rxmode.[bit-fields]
- Tx per-queue rte_eth_txconf.txq_flags
- ETH_TXQ_FLAGS_NO*
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Shahaf Shuler <shahafs@mellanox.com>
