Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Also rename arp_hrd, arp_pro, arp_hln, arp_pln and arp_op fields
to avoid conflict with the #defines in gnu libc.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since ice can support 128, 512, 2K RSS RETA size value, change the
update API to set it to resize the RSS RETA table. And by default,
use 512 to sync with ETH_RSS_RETA_SIZE_x maximum value definition.
Also the flag ICE_FLAG_RSS_AQ_CAPABLE is missed to set.
Fixes: 690175ee51 ("net/ice: support getting device information")
Fixes: ff963bfa7c ("net/ice: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Tx desc's DD status is not cleaned by NIC automatically after packets
have been transmitted until software refill a new packet during next
loop. So when tx_free_thresh + tx_rs_thresh > nb_desc, it is possible
that an outdated DD status be checked as tx_next_dd, then segment fault
happen due to free a NULL mbuf pointer.
Then patch fixes this issue by
1. try to adapt tx_rs_thresh to an aggressive tx_free_thresh.
2. queue setup fail when tx_free_thresh + tx_rs_thresh > nb_desc
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Tx desc's DD status is not cleaned by NIC automatically after packets
have been transmitted until software refill a new packet during next
loop. So when tx_free_thresh + tx_rs_thresh > nb_desc, it is possible
that an outdated DD status be checked as tx_next_dd, then segment fault
happen due to free a NULL mbuf pointer.
Then patch fixes this issue by
1. try to adapt tx_rs_thresh to an aggressive tx_free_thresh.
2. queue setup fail when tx_free_thresh + tx_rs_thresh > nb_desc
Fixes: 50370662b7 ("net/ice: support device and queue ops")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Tx desc's DD status is not cleaned by NIC automatically after packets
have been transmitted until software refill a new packet during next
loop. So when tx_free_thresh + tx_rs_thresh > nb_desc, it is possible
that an outdated DD status be checked as tx_next_dd, then segment fault
happen due to free a NULL mbuf pointer.
Then patch fixes this issue by
1. try to adapt tx_rs_thresh to an aggressive tx_free_thresh.
2. queue setup fail when tx_free_thresh + tx_rs_thresh > nb_desc
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The nic's interrupt source has some active handler, which maybe call
ixgbe_dev_link_update() to set link handler. We should cancel the
link handler before remove dev to prevent executing the link handler.
It triggers segfault.
Fixes: 0408f47ba4 ("net/ixgbe: fix busy polling while fiber link update")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Wei Zhao <wei.zhao1@intel.com>
This commit sets the min and max supported MTU values for ice devices
via the ice_dev_info_get() function. Min MTU supported is set to
ETHER_MIN_MTU and max mtu is calculated as the max packet length
supported minus the transport overhead.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Refuse to create the second RSS flow rule as only one RSS key and
HASH register for each PF port. Users should delete the first rule
before setup the second rule.
Fixes: ecad87d223 ("net/i40e: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Wenjie Li <wenjiex.a.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Some application, e.g. the l3fwd-power sample uses rte_eth_rx_queue_count()
API to get the get the number of used descriptors of a Rx queue. This patch
adds fm10k implementation for this API.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Support link up and down functions for ice, and when stop the ice,
makes the link down also.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The "make clean" command had a number of issues:
- the "--ignore-fail-on-non-empty" flag is not present on BSD
- the call to remove the build folder would fail if there was no build
folder present.
These are fixed by only removing the build folder if it exists, and by
using -p flag to rmdir in place of --ignore-fail-on-non-empty
Fixes: 22119c4591 ("examples: use pkg-config in makefiles")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The examples/meson.build file scanned the filesystem to find all examples
to build (for examples=all option) and install. However, using run_command
and scanning the filesystem prevented ninja from properly detecting the
addition or removal of any examples - one had to recreate the build
directory from scratch to guarantee correct detection of all examples. This
patch replaces this generated list with a static list of examples, thereby
allowing proper tracking by ninja/meson, but at the cost of having to
update this file when a new example is added or removed.
This also fixes an issue with Windows builds, since "sh" is not available
there.
Fixes: 2daf565f91 ("examples: install as part of ninja install")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
While the examples were being installed into the appropriate install path
when processing the examples/meson.build file, that file was only processed
if the "examples" meson parameter was non-empty. Since we now do more than
just build the examples, we need to unconditionally process the file.
Fixes: 2daf565f91 ("examples: install as part of ninja install")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Start a new release cycle with empty release notes.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Function rte_power_set_env will no longer return
success on attempt to set env in initialized state.
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Reviewed-by: Rami Rosen <ramirose@gmail.com>
Acked-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add deprecation note for making changes in data structures, APIs
and macros in order to have more traffic classes, flexible
mapping of pipe queues to traffic classes, subport level
configuration of pipes and queues, etc. These changes are aligned
to improvements suggested in the RFC-
https://mails.dpdk.org/archives/dev/2018-November/120035.html
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
This patch adds deprecation notice of changing iv behaviour
when using Galois Counter Mode of operation.
With this change, IV of all supported sizes can be used.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
It is planned to make the rte_mem_config struct of the EAL private to
remove it from the visible ABI. Add a notice to announce the intention.
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Two public functions from EAL and metrics libraries need to return
some new error codes instead of calling rte_panic or rte_exit.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Arnon Warshavsky <arnon@qwilt.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
In case a vulnerability is discovered, the process to follow
is described in this document.
It has been inspired by the process of some referenced projects
and with the help of experts from Intel, RedHat, Mellanox
and the Linux Foundation.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Luca Boccassi <bluca@debian.org>
This patch adds some missing features to Mellanox drivers release notes.
It also updates the mlx5/mlx4 documentations.
Fixes: d85b204b5d ("doc: update release notes for Mellanox drivers")
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Updated doc for JSON sample code related to vm_power_manager
fifo interface: "command": "destroy", "command": "power".
There is no code change to go with this doc update, it is to fix
the docs to match the implementation in the code.
Fixes: a63504a90f ("examples/power: add JSON string handling")
Cc: stable@dpdk.org
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Now that some of the symbols in the timer lib are versioned, the
Doxygen documentation that is generated is incorrect. Group all
versioned symbols, listing the generic name first, and remove comments
for older versions of symbols.
Fixes: c0749f7096 ("timer: allow management in shared memory")
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
There is an error in function rxtx_port_config(), which may overwrite
offloads configuration get from function launch_args_parse() when run
testpmd app. So rxtx_port_config() should do "or" for port offloads.
Fixes: d44f8a485f ("app/testpmd: enable per queue configure")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Peng Yuan <yuan.peng@intel.com>
IBV_EVENT_DEVICE_FATAL event is generated by the driver once for
the entire multiport Infiniband device, not for each existing ports.
The port index is zero and it causes dropping the device removal
event. We should invoke the removal event processing routine
for each port we have installed handler for.
Fixes: 028b2a28c3 ("net/mlx5: update event handler for multiport IB devices")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The scheduling type parameter is not applicable for single link
queues. DSW would, at the time of rte_event_queue_setup(), erroneously
verify that scheduling type was one of the supported types, and
returned -ENOTSUP in case of RTE_SCHED_TYPE_ORDERED.
Fixes: 4540ee9c68 ("event/dsw: add device and queue configuration")
Cc: stable@dpdk.org
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Gage Eads <gage.eads@intel.com>
The Rx adapter flushes events only if it has BATCH_SIZE
events buffered where BATCH_SIZE is set to 32, e.g., if a
single packet is sent, it is never passed to
eventdev. Fix this issue by adding an event buffer flush
either when a Rx queue is found to be empty or the adapter service
function has processed the max number of packets for an invocation.
Bugzilla ID: 277
Fixes: 6b83f59355 ("eventdev: add event buffer flush in Rx adapter")
Cc: stable@dpdk.org
Reported-by: Matias Elo <matias.elo@nokia.com>
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Reviewed-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Tested-by: Matias Elo <matias.elo@nokia.com>
Rather than default to origin/master.., it can be handy to choose the
range you want to check.
Example on a branch rebased on next-net:
Before:
$ ./devtools/checkpatches.sh
...
...
67/69 valid patches
After:
$ ./devtools/checkpatches.sh -r next-net/master..
3/3 valid patches
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
add recommended DPDK/kernel driver/firmware version matching list for
i40e for 19.05
Signed-off-by: Lijuan Tu <lijuan.tu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Add tested Intel platforms with Intel NICs to v19.05 release note.
Signed-off-by: Lijuan Tu <lijuan.tu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Platform specific guide for Mellanox BlueField SoC is added.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Added release note entry for QAT compression PMD
Clarified that previous entry was for QAT sym crypto PMD
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Remove redundant information from section Performance issue isolation.
Re-word for section header for packet capture.
Fixes: 08db7bde16 ("doc: add guide for debug and troubleshoot")
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Minor formatting error related to code block noticed when reading the doc.
Fix it and some other errors.
Fixes: c7217b9dd8 ("app/testpmd: change log level at run time")
Fixes: 3c272b280a ("app/testpmd: add commands for RSS queue region")
Fixes: e38ea44f17 ("app/testpmd: add configuration for input set")
Fixes: 08e0b3440b ("app/testpmd: add option to configure UDP tunnel port")
Fixes: e977e4199a ("app/testpmd: add commands to load/unload BPF filters")
Cc: stable@dpdk.org
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The incriminated commit broke the detection of new symbols skipping the
EXPERIMENTAL step before entering a stable ABI section.
sed won't return an error, check a null output instead.
Fixes: 3630757803 ("devtools: accept experimental symbol promotion")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
We have an incorrect variable name in this log.
Fixes: 4bec48184e ("devtools: add checks for ABI symbol addition")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Fix invalid indentation - extra whitespace before error directive which
is causing syntax error when no pkgconfig file for the DPDK is found and
RTE_SDK is not specified.
Fixes: d299106e8e ("examples/ipsec-secgw: add IPsec sample application")
Cc: stable@dpdk.org
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
