Fix ecore_configure_vp_wfq_on_link_change() to use a provided ptt[PF
translation table] handle instead of directly using p_dpc_ptt
Fixes: ec94dbc573 ("qede: add base driver")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Status Block reallocation - allow a PF and its child VF to change SB
between them using new base driver APIs.
The changes that are inside base driver flows are:
New APIs ecore_int_igu_reset_cam() and ecore_int_igu_reset_cam_default()
added to reset IGU CAM.
a. During hw_prepare(), driver would re-initialize the IGU CAM.
b. During hw_stop(), driver would initialize the IGU CAM to default.
Use igu_sb_id instead of sb_idx [protocol index] to allow setting of
the timer-resolution in CAU[coalescing algorithm unit] for all SBs,
sb_idx could limit SBs 0-11 only to be able change their timer-resolution.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Allow opening Multiple Tx queues on a single qzone for VFs.
This is supported by Rx/Tx TLVs now having an additional extended TLV that
passes the `qid_usage_idx', a unique number per each queue-cid that was
opened for a given queue-zone.
Fix to overcome TX timeout issue due to more than 16 CIDs by adding an
additional VF legacy mode. This will detach the CIDs from the original
only-existing legacy mode suited for older releases.
Following this change, only VFs that would publish VFPF_ACQUIRE_CAP_QIDS
would have the new CIDs scheme applied. I.e., the new 'legacy' mode is
actually whether this capability is published or not.
Changed the logic to clear doorbells for legacy and non-legacy VFs, so
the PF is cleaning the doorbells for both cases.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Change the order by which we allocate the resources to align with
management FW by first allocating the VF l2 queues and only
afterwards use what's left for the PF.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Move ecore_crc32() macro to within base driver to qede_crc32() and use
OSAL_CRC32() where required.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
- Add transceivers temperature monitoring/reporting feature
- Add new mbox command DRV_MSG_CODE_FEATURE_SUPPORT to exchange info
between drivers and management FW regarding features supported
- Add EEE to Link Flap Avoidance check, etc.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
rx/tx_queue_setup functions are shared between PF and VF
drivers. So the var 'pf' should not be assigned at the beginning.
This patch fixes the issue, and also corrects the return err code.
Fixes: b6583ee402 ("i40e: full VMDQ pools support")
Cc: stable@dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Use stdbool.h instead of defining the bool type, to make
sure the virtchnnl msg format definition is the same
between PF and VF.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
The size of "flex_filter.filter_info.mask" and "filter->mask" are 16
bytes, but the length of memcpy--"RTE_ALIGN(filter->len, sizeof(char))
/ sizeof(char)" may reach 128 bytes which may cause array access out
of bound.
Fix it by replacing "sizeof(char)" by "CHAR_BIT".
Fixes: 231d43909a ("igb: migrate flex filter to new API")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In func lio_dev_link_update(), "link.link_autoneg" is used in func call
lio_dev_atomic_write_link_status(), but it is uninitialized.
Fixes: 3766020513 ("net/liquidio: add APIs to start device and update link")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
This commit fixes two bugs related to tap devices. The first bug occurs
when executing in testpmd the following flow rule assuming tap device has
4 rx and tx pair queues
"flow create 0 ingress pattern eth / end actions queue index 5 / end"
This command will report on success and will print ""Flow rule #0 created"
although it should have failed as queue index number 5 does not exist
The second bug occurs when executing in testpmd "port start all" following
a port configuration. Assuming 1 pair of rx and tx queues an error is
reported: "Fail to start port 0"
Before this commit a fixed max number (16) of rx and tx queue pairs were
created on startup where the file descriptors (fds) of rx and tx pairs were
identical. As a result in the first bug queue index 5 existed because the
tap device was created with 16 rx and tx queue pairs regardless of the
configured number of queues. In the second bug when tap device was started
tx fd was closed before opening it and executing ioctl() on it. However
closing the sole fd of the device caused ioctl to fail with "No such
device".
This commit creates the configured number of rx and tx queue pairs (up to
max 16) and assigns a unique fd to each queue. It was written to solve the
first bug and was found as the right fix for the second bug as well.
Fixes: 02f96a0a82 ("net/tap: add TUN/TAP device PMD")
Fixes: bf7b7f437b ("net/tap: create netdevice during probing")
Fixes: de96fe68ae ("net/tap: add basic flow API patterns and actions")
Cc: stable@dpdk.org
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
This should be an comparison operation rather than an assignment
operation.
Fixes: 5e41ab250d ("app/test: unit tests for bonding mode 4")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some compilers generate warnings for duplicate symbols for the
set of filter lists current defined in ixgbe_ethdev.h.
This commits moves the definition and declaration to the source
file that actually uses them and provides a function to
initialize the values akin to its flush function.
Signed-off-by: David Harton <dharton@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Radu Nicolau <radu.nicolau@intel.com>
VFs rely on config BAR for getting the MAC address, although a
random one is created a valid address is not found.
A PF port has a fixed MAC which is currently acquired using the NSPU
interface. Some NFP firmwares require the MAC being writing back
to the config BAR for doing proper MAC filtering.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
These capabilities are enabled in current NFP firmwares by
default, but it could be they are not with NFP firmwares to come.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Link speed is not advertised in old firmwares. However, it is safe
to remove the check because reading NFP_NET_CFG_STS returns 0 in
those cases.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
For i40e NIC bond_ethdev_8023ad_flow_verify fails when action queue
index indicates unavailable queue before slaves configuration.
This fix verifies flow settings for queue 0, which is always available,
and checks if slaves max queue number capacity meets requirements.
Fixes: 112891cd27 ("net/bonding: add dedicated HW queues for LACP control")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Previously, for PF statistics we use VSI register for packet count
but use port's register for packet bytes, that cause inconsistent
situation of PF statistics when some VF is active, since it will
cover VF's packet bytes but not packet count.
The patch will take port register for PF packet count back, but still
exclude main vsi's discard packet count.
Just like previous fix, its still not perfect, (since RX packet number
is over counted when there is VF discard packet) but seems it make the
overall better.
Fixes: 9aace75fc8 ("i40e: fix statistics")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Mellanox NICs has a limitation on the number of mbuf segments a multi
segment mbuf can have. The max number depends on the Tx offloads
requested.
The current code not enforce such limitation, which might cause
malformed work requests to be written to the device.
This commit adds verification for the number of mbuf segments posted
to the device. In case of overflow the packet will not be sent.
In addition update the nic documentation with the limitation.
Considering device limitation is 63 data segments in a work request, the
maximum number of segment in mbuf was calculated taking TSO as the worst
case:
max_nb_segs = 63 - (control_segment + ethernet segment +
TSO headers inline + inline segment +
extra inline to align to cacheline)
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
The current Tx error counter counts, according to its description,
the total number of packets not sent when TX ring full. It is reported
to application as part of oerrors field.
The drop due to full ring is not the statistic that should be set on
oerrors field. Such number can be counted by the application using the
return value of the Tx burst function.
The number that should be set there is the number of packets the device
could not transmit in any way, even when it has resources.
Therefore, replace this counter to count the total number of failed
transmitted packets.
Fixes: 87011737b7 ("mlx5: add software counters")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
vPMD Tx function assumes that after the scatter of the
multi-segment packets the next packet will be a single segment packet.
This is not current as the function can return due to lack of resources
without sending all of the multi-segment mbufs sequence.
Fixes: 6cb559d67b ("net/mlx5: add vectorized Rx/Tx burst for x86")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Tx descriptor for TSO embeds packet header to be replicated. If Tx
inline is enabled, there could be additional packet data inlined with
4B inline header ahead. And between the header and additional inlined
packet data, there may be padding to make the inline part aligned to
MLX5_WQE_DWORD_SIZE. In calculating the total size of inlined data,
the size of inline header and padding is missing.
Fixes: 3f13f8c23a ("net/mlx5: support hardware TSO")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
The i40e maintains a single MAC filter table for both
unicast and multicast addresses. The i40e_validate_mac_addr
function was preventing multicast addresses from being added
to the table via i40evf_add_mac_addr. Fixed the issue by
adjusting the check in i40evf_add_mac_addr.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Fixes: 97ac72aa71 ("i40e: support setting VF MAC address")
Cc: stable@dpdk.org
Signed-off-by: David Harton <dharton@cisco.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The previous stats code returned only the current TX sub
device stats.
This enhancement extends it to return the sum of all sub
devices stats with history of removed sub-devices.
Dedicated stats accumulator saves the stat history of all
sub device remove events.
Each failsafe sub device contains the last stats asked by
the user and updates the accumulator in removal time.
I would like to implement ultimate snapshot on removal time.
The stats_get API needs to be changed to return error in the
case it is too late to retrieve statistics.
By this way, failsafe can get stats snapshot in removal interrupt
callback for each PMD which can give stats after removal event.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Extend the LSC event handling to support the device removal as well.
The mlx5 event handling has been made capable of receiving and
signaling several event types at once.
This support includes next:
1. Removal event detection according to the user configuration.
2. Calling to all registered mlx5 removal callbacks.
3. Capabilities extension to include removal interrupt handling.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Link status is sometimes inconsistent during a LSC event.
When it occurs, the PMD refrains from immediately notifying
the application; instead, an alarm is scheduled to check
link status later and notify the application once it has settled.
In the previous code the alarm callback calls to the interrupt
handler for link status recheck and may cause to unnecessary
interrupt events check.
This patch separates the link status update and the interrupt event
handler to avoid the unnecessary check and arranges the interrupt
handler for more interrupt supports in the future.
Comment was added in the new function to explain the inconsistent
link status reason.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Updated vmxnet3_mac_addr_set() to store the newly set MAC address.
Modified vmxnet3_write_mac() so the h/w is updated in an endian
neutral manner.
Fixes: 139f39a978 ("vmxnet3: support setting MAC address")
Cc: stable@dpdk.org
Signed-off-by: David Harton <dharton@cisco.com>
Acked-by: Shrikrishna Khare <skhare@vmware.com>
vmxnet3 Rx processing should replenish ring buffers after new buffers
are available to prevent the interface from getting stuck in a state
that no new work is processed.
Signed-off-by: David Harton <dharton@cisco.com>
Acked-by: Shrikrishna Khare <skhare@vmware.com>
The testpmd was doing old BSD lint style casts of rte_memcpy
to (void). This is unnecessary.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
mirror rule_type can be a bit OR result of multiple mirror type of
a rule.
Fixes: 7ba29a76b1 ("ethdev: rename and extend the mirror type")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Since interrupt handler is the only function relying on it, merging them
simplifies the code as there is no need for an API to return collected
events.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Link status is sometimes inconsistent during a LSC event. When it occurs,
the PMD refrains from immediately notifying the application; instead, an
alarm is scheduled to check link status later and notify the application
once it has settled.
The problem is that subsequent link status checks are only performed if
additional LSC events occur in the meantime, which is not always the case.
Worse, since support for removal events was added, rescheduled link status
checks may consume them as well without notifying the application. With the
right timing, a link loss occurring just before a device removal event may
hide it from the application.
Fixes: 6dd7b7056d ("net/mlx4: support device removal event")
Fixes: 2d449f7c52 ("net/mlx4: fix assertion failure on link update")
Cc: stable@dpdk.org
Reported-by: Matan Azrad <matan@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
