Request management FW for OEM values, which are negotiated prior to
the driver load by sending the GET_OEM_UPDATES command after both
engines are initialized.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add a pretend function for port/PF, pretend to another port and another
function when accessing the ptt window
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Modified queue manager getter APIs to cycle through their range if
index is higher than max. This prevents accessing index out of bounds.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Added ecore_update_eth_rss_ind_table_entry() api to update FW RSS
indirection table entry according to new interface of FW 8.37.x.x.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
The driver can notify that there was an MCP reset and read the SHMEM
values before the management FW has completed initializing them.
As a temporary solution, the "sup_msgs" field is used as a SHMEM data
ready indication. This should be replaced with an actual indication
when it is provided by the management FW.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add DPC sync after stopping the physical funciton to allow clean up of
asyncronous events. Post this the driver don't expect the FW to send
async events.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
When the firmware version and the driver HWRM version do not match,
we are logging some messages. These messages unnecessarily clutter
the logs and can add to the noise. We are logging the HWRM version
and the firmware version anyway. The difference in version numbers
can be gleaned from that. Removing the remaining log messages.
Fixes: 804e746c7b ("net/bnxt: add hardware resource manager init code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Firmware sets pf pair in default VNIC cfg. If the VLAN strip
setting is not available at this time, it will not be
configured correctly in the CFA.
Set the desired VLAN strip mode before default VNIC configuration.
Fixes: 7fe5668d2e ("net/bnxt: support VLAN filter and strip")
Cc: stable@dpdk.org
Signed-off-by: Bei Sun <bei.sun@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
If a vnic is configured as default and the setting has not changed,
there is no need to issue this setting again to the FW.
Fixes: db678d5c2b ("net/bnxt: add HWRM VNIC configure")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We need to set HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST bit in
L2_FILTER_ALLOC for filtering non-tunnel packets based on outermost MAC.
Fixes: f92735db1e ("net/bnxt: add L2 filter alloc/init/free")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
While registering vf's event completion ring to FW, use the wrong
macro, FW doesn't set up the event completion ring successfully,
VF can't receive any async event.
Fixes: 4535cad395 ("net/bnxt: handle VF/PF initialization appropriately")
Cc: stable@dpdk.org
Signed-off-by: Yongping Zhang <yongping.zhang@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In the current model, VFs are not trusted.
So it is not allowed to send many HWRM commands.
Newer firmware has added support to allow VF to be trusted.
Now the VF queries if it is a trusted entity and based on that
it can send HWRM commands to the firmware.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
For hardware having multiple embedded management processors the firmware
has added support to indicate if the comm channel to the processor has
been enabled. If the channel is enabled, switch the CFA NTUPLE and EM
filtering commands to use the kong channel.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds support extended port statistics like COS bytes,
packets, XON -> XOFF and XOFF -> XON transitions in Tx and Rx path.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The HW can support maximum frame length of 9600 bytes.
And we are currently capping the max frame size to 9500 bytes.
Fixes: daef48efe5 ("net/bnxt: support set MTU")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
bnxt_start_xmit() was attempting to access an uninitialized ptr - txbd1
which would lead to segmentation fault.
Fix to initialize ptr to NULL and check for the same before access.
Fixes: f10258e39e ("net/bnxt: fix HW Tx checksum offload check")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
There was no direct association between the rxq's VNIC and the
vnic_info[].
Explicitly associate the two in bnxt_mq_rx_configure().
Fixes: 0a256e4a54 ("net/bnxt: fix Rx ring count limitation")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Support counter action for 1400 series adapters.
The adapter API for allocating and freeing counters is independent of
the adapter match/action API. If the filter action is requested, a
counter is first allocated and then assigned to the filter, and when
the filter is deleted, the counter must also be deleted.
Counters are DMAd to pre-allocated consistent memory periodically,
controlled by the define VNIC_FLOW_COUNTER_UPDATE_MSECS. The default is
100 milliseconds.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
rte_flow structures were not being freed when destroyed or flushed.
Fixes: 6ced137607 ("net/enic: flow API for NICs with advanced filters enabled")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
This patch adds phy_lock, acquire/release the lock when performing
PHY transactions. Without this fix driver can run into synchronization
issues with management FW when modifying PHY settings.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
If link handling periodic function is allowed to be called in interrupt
context, the periodic function can get called too frequently and exhaust
the retry credits to check link status.
This change makes sure link handling periodic function is not called in
interrupt context.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Fix to disable further fastpath/slowpath interrupts. These will be
enabled again by their respective handlers
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Fix PMD logging scheme to include device name in the messages printed.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Three problems are fixed in this patch:
- RSS capabilities not advertised properly
- RSS configuration just done for some RSS types
- RSS hash match reported for just some RSS types
Fixes: 934e4c60fb ("nfp: add RSS")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Should check return value from processing latency value.
Coverity issue: 322104
Fixes: a25d39a3eb ("net/netvsc: allow tuning latency with devargs")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Failsafe device capabilities depend on supported by the failsafe
itself plus capabilities supported by sub-devices.
Make fs_dev_infos_get() take failsafe device capabilities into account.
Fixes: cac923cfea ("ethdev: support runtime queue setup")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Reopening vNIC does not automatically disable overlay offload. If it
is previously enabled, it remains enabled even when the user restarts
DPDK and requests overlay offload to be disabled via devarg
disable-overlay=1. So explicitly disable overlay offload when
requested.
Fixes: 93fb21fdbe ("net/enic: enable overlay offload for VXLAN and GENEVE")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Currently the simple Tx handler supports no offloads, which makes it
usable only for a small number of benchmarks. Add vlan and checksum
offloads to the handler, as cycles/packet increases only by about 3
cycles, and applications commonly use those offloads.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
The NIC indicates VLAN TCI to the driver even when VLAN stripping is
disabled. The driver sets mbuf's vlan_tci but not PKT_RX_VLAN. Set
PKT_RX_VLAN to indicate that vlan_tci is valid.
Fixes: c6f4555074 ("net/enic: add ethernet VLAN packet type")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Cisco VIC models support RTE_IOVA_VA, so enable it. This change allows
the driver to work properly when --no-huge is used, in combination
with vfio and iommu.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Bugzilla ID: 39
Fixes: 9913fbb91d ("enic/base: common code")
Fixes: 322b355f21 ("net/enic/base: bring NIC interface functions up to date")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Provide API's to enable allmulticast and promiscuous in Netvsc PMD
with VF. This keeps the VF and PV path in sync.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
I40e driver needed users to config exact fdir mode to create rte_flow
rules but it shouldn't. This patch allows users to create rte_flow rules
without configuring fdir mode and let the driver config fdir automatically.
And remove the workaround in flow filtering example.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
After setting up the link on a fiber port, the maximum wait time for
the link to come up is 500 ms in ixgbe_setup_mac_link_multispeed_fiber().
On an x550 SFP+ port, this is often not sufficiently long for the link
to come up. This can result in never being able to retrieve accurate
link status for the port using rte_eth_link_get_nowait().
Increase the maximum wait time in ixgbe_setup_mac_link_multispeed_fiber()
to 1 s.
Bugzilla ID: 69
Fixes: f3430431ab ("ixgbe/base: add SFP+ dual-speed support")
Cc: stable@dpdk.org
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Since rte_intr_enable is called at init and start time. Remove it in
interrupt_action function to avoid too many system calls.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Since rte_intr_enable is called at init and start time. Remove it in
interrupt_action function to avoid too many system calls.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
There is a new set of TR bits that can be used when replacing
the cloud filters so add them in. Also added a check to make
sure that the replace cloud filters AQ command doesn't get
executed on an X722 since it is not supported there.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add HW capability flag to indicate that firmware supports stopping
LLDP agent. This feature has been added in FW API 1.7 for XL710
devices and 1.6 for X722. Also raise expected minor version number
for X722 FW API to 6.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
These two functions are currently only used in the LED get/set
functions, which are not apart of the VF driver. So the
i40e_aq_set/get_phy_register functions should be wrapped so they
can be removed from the VF driver.
This was brought up in the Linux community that these functions in
the VF driver had no callers in the tree, so they should be removed.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
