Fixes: 97cb466d65c9 ("mbuf: use 2 bytes for port and nb segments")
Cc: stable@dpdk.org
Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When Rx interrupt is not enabled, there is no need to check if interrupt
allow others. It will cause VF cannot forwarding packets issue. This patch
fixes this issue.
Fixes: 96a9fd03c25f ("net/i40e: fix Rx queue interrupt mapping in VF")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
When a VF port is bound to VFIO-PCI, miscellaneous interrupt is
mapped to MSI-X vector 0 and Rx queues interrupt are mapped to
other vectors in vfio_enable_msix( ). To simplify implementation,
all VFIO-PCI bound i40e VF Rx queue interrupts can be mapped in
vector 1. And as current igb_uio only support only one vector,
i40e VF PMD should use vector 0 for igb_uio and vector 1 for
VFIO-PCI. Without this patch, VF Rx queue interrupt is mapped
to vector 0 in register settings and mapped to VFIO vector 1
in vfio_enable_msix( ), and then all Rx queue interrupts will
be missed.
Also remove 2 unused macro definitions.
Fixes: 4b90a3ff26c5 ("i40evf: support Rx interrupt")
Fixes: 975ffea6f671 ("net/i40e: remove DPDK PF version specific code")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
When a VF port is bound to VFIO-PIC, only miscellaneous interrupt
is mapped to VFIO vector 0 in i40evf_dev_init( ).
In i40evf_dev_interrupt_handle( ) and i40evf_dev_rx_queue_intr_enable( ),
if previous VFIO interrupt mapping set in i40evf_dev_init( ) is not
cleared, it will fail when PMD tries to map Rx queue interrupt to other
VFIO vectors by calling rte_intr_enable( ).
This patch clears the VFIO interrupt mappings before setting both
miscellaneous and Rx queue interrupt mappings again to avoid failure.
And remove the calling of rte_intr_enable( ) in
i40evf_dev_interrupt_handler( ) as there is no need to map VFIO interrupt
in this function repeatedly.
Fixes: 4b90a3ff26c5 ("i40evf: support Rx interrupt")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Fix i40e stop receiving on ARM, as the statuses of RX descriptors
are not consistent, which is caused by cacheable hugepages.
Fixes: ae0eb310f253 ("net/i40e: implement vector PMD for ARM")
Cc: stable@dpdk.org
Signed-off-by: Jianbo Liu <jianbo.liu@arm.com>
Value of I40E_GL_SWR_PRI_JOIN_MAP_0 need to be corrected or mirror
does not work on latest firmware 6.0.
Fixes: 77370db964f7 ("net/i40e: fix ethertype filter for new FW")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The following inline functions and macros have been renamed to be
consistent with the IOVA wording:
rte_mbuf_data_dma_addr -> rte_mbuf_data_iova
rte_mbuf_data_dma_addr_default -> rte_mbuf_data_iova_default
rte_pktmbuf_mtophys -> rte_pktmbuf_iova
rte_pktmbuf_mtophys_offset -> rte_pktmbuf_iova_offset
The deprecated functions and macros are kept to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Rename buf_physaddr to buf_iova.
Keep the deprecated name in an anonymous union to avoid breaking
the API.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The struct rte_memzone field .phys_addr is renamed to .iova.
The deprecated name is kept in an anonymous union to avoid breaking
the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The memzone header is often included without good reason.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The PCI lib defines the types and methods allowing to use PCI elements.
The PCI bus implements a bus driver for PCI devices by constructing
rte_bus elements using the PCI lib.
Move the relevant code out of the EAL to its expected place.
Libraries, drivers, unit tests and applications are updated to use the
new rte_bus_pci.h header when necessary.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Some devices may not support or fail setting VLAN offload
configuration based on dynamic circumstances so the
vlan_offload_set_t vector is modified to return an int so
the caller can determine success or not.
rte_eth_dev_set_vlan_offload is updated to return the
value provided by the vector when called along with restoring
the original offload configs on failure.
Existing vlan_offload_set_t vectors are modified to return
an int. Majority of cases return 0 but a few that actually
can fail now return their failure codes.
Finally, a vlan_offload_set_t vector is added to virtio
to facilitate dynamically turning VLAN strip on or off.
Signed-off-by: David Harton <dharton@cisco.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated for a while.
As explained in [1], these flags were kept to let the applications and
PMDs move to the new flag. There is also a need to support Rx vlan
offload without vlan strip (at least for the ixgbe driver).
This patch renames the old flags for this feature, knowing that some
PMDs were using PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT to indicate that
the vlan tci has been saved in the mbuf structure.
It is likely that some PMDs do not set the proper flags when doing vlan
offload, and it would be worth making a pass on all of them.
Link: [1] http://dpdk.org/ml/archives/dev/2017-June/067712.html
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This flag is not necessary at the ether layer anymore.
Buses are able to advertise their hotplug support. The ether layer can
rely upon this capability instead of a special flag.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
when VSI is enabled with smaller number of queues, for example 1 or 6,
it will cause error.
64 is the max number of queues that can be used for RSS, but VSI might
be created with only few queues.
Fixes: 7cbecc2f742 ("net/i40e: support queue region set and flush")
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Use more secure snprintf function instead of strncpy
to prevent memory access violation.
Fixes: 40d1324423a4 ("net/i40e: get ddp profile protocol info")
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
For complex packets use raw flow type with pre-constructed packet buffer
instead of creating a packet internally in PMD.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
For L3 or L4 packets, PCtype is parsed wrongly when
input set is VLAN only.
This patch fixes the issue.
Fixes: 15018d79f0be ("net/i40e: add FDIR support for GTP-C and GTP-U")
Fixes: 7d83c152a207 ("net/i40e: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Queue's parent is TC not port. It's wrong to always set
the parent to root.
Fixes: e0ff4d304ccf ("net/ixgbe: support adding TM node")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
It's by design that APP can add a TM node without shaper
profile. But i40e doesn't support it currently.
Fixes: 03a249b62bbd ("net/i40e: support adding TM node")
Fixes: cac29c3c00a4 ("net/i40e: support committing TM hierarchy")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Only queue nodes should be taken as leaf nodes, all
the other nodes are non-leaf nodes.
Correct it when getting the TM level capability.
Fixes: 0fb1ef1e7930 ("net/i40e: support getting TM level capability")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Only queue nodes should be taken as leaf nodes, all
the other nodes are non-leaf nodes.
Correct it when checking the parameters of the TM nodes.
Fixes: 03a249b62bbd ("net/i40e: support adding TM node")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The list of libraries in LDLIBS was generated from the DEPDIRS-xyz
variable. This is valid when the subdirectory name match the library
name, but it's not always the case, especially for PMDs.
The patches removes this feature and explicitly adds the proper
libraries in LDLIBS.
Some DEPDIRS-xyz variables become useless, remove them.
Reported-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
In igb_uio, FLR is issued during open device file. i40evf is trying
to initialize admin queue when driver probe, while the FLR is not
done by host driver. That will cause initialization fail.
This patch is adding the checking if VF reset is done before
adimin queue initialization.
Fixes: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of device file")
Cc: stable@dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Some functions applied were still developed on top of uint8_t port_id,
however port_id has been increased range to uint16_t. The patch fixes
the issue.
Fixes: f8244c6399d9 ("ethdev: increase port id range")
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
ENODATA can not be build in FreeBSD.
Fixes: 7cbecc2f7424b ("net/i40e: support queue region set and flush")
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
vPMD tx does not set sw_ring's mbuf to NULL after free.
Therefore, in cases where the vector transmit function is in
use, we must use the appropriate index and threshold values
for the queue to only free the unreleased mbufs
Fixes: b4669bb95038 ("i40e: add vector Tx")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Removed legacy writes to ORT/PIT registers from
i40e_GLQF_reg_init(struct i40e_hw *hw) function.
Latest NVM versions contain all relevant values
and these values should not be overwritten by SW to
maintain driver/firmware compatibility and to avoid
conflicts with dynamic device personalization profiles.
Fixes: f05ec7d77e41 ("i40e: initialize flow director flexible payload setting")
Cc: stable@dpdk.org
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
In order to achieve reproducible builds, always use the same
order when listing files for compilation.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
If we want to enable IOVA mode, introduced by
commit 93878cf0255e ("eal: introduce helper API for IOVA mode"),
we need PMDs (for PCI devices) to expose this flag.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
This feature enable queue regions configuration for RSS in PF,
so that different traffic classes or different packet
classification types can be separated to different queues in
different queue regions.This patch can set queue region range,
it include queue number in a region and the index of first queue.
This patch enable mapping between different priorities (UP) and
different traffic classes.It also enable mapping between a region
index and a sepcific flowtype(PCTYPE).It also provide the solution
of flush all configuration about queue region the above described.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
The stats_get dev op API doesn't include return value, so PMD cannot
return an error in case of failure at stats getting process time.
Since PCI devices can be removed and there is a time between the
physical removal to the RMV interrupt, the user may get invalid stats
without any indication.
This patch changes the stats_get API return value to be int instead of
void.
All the net PMDs stats_get dev ops are adjusted by this patch.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In func i40evf_dev_link_update(), "new_link.link_autoneg" is used in
func call i40evf_dev_atomic_write_link_status(), but is uninitialized.
Fixes: 2a73125b7041 ("i40evf: fix link info update")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Need a way to convert a VF id to a PF id on the host so as to query the
PF for relevant statistics which are used for the frequency changes in
the vm_power_manager app.
Used when profiles are passed down from the guest to the host, allowing
the host to map the VFs to PFs.
Signed-off-by: Nemanja Marjanovic <nemanja.marjanovic@intel.com>
Signed-off-by: Rory Sexton <rory.sexton@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Previously, to get MFN address in dom0, this API is a wrapper to
obtain the "physical address".
As we will removed xen dom0 support, this API is not necessary.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.
Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.
release_17_11 and deprecation docs have been updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch sets TEID of GTP-C and GTP-U as filter type
by replacing existed filter types inner_mac and TUNNEL_KEY.
This configuration will be set when adding GTP-C or
GTP-U filter rules, and it will be invalid only by
NIC core reset.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds i40e_flow_parse_gtp_filter parsing
function for GTP-C and GTP-U to support cloud filter.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds FDIR support for GTP-C and GTP-U. The
input set of GTP-C and GTP-U is TEID.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Reviewed-by: Seán Harte <seanbh@gmail.com>
rte_eth_fdir_* structures are still used in FDIR functions.
This patch adds i40e private FDIR related structures and
functions to finish integration FDIR with generic flow API.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Update new packet type and new pctype info when downloading
profile.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add new functions which allow modify, return or reset to default
the contents of flow type to pctype dynamic mapping table.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Implement dynamic mapping of software flow types to hardware pctypes.
This allows to add new flow types and pctypes for DDP without changing
API of the driver. The mapping table is located in private
data area for particular network adapter and can be individually
modified with set of appropriate functions.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds new package info types to get list of protocols,
pctypes and ptypes defined in a profile
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When an i40e PF port is stopped, all mirror rules should be reserved.
But when an i40e PF port is closed, all mirror rules should be removed.
When a mirror rule is removed, its associated hardware and software
resource should also be removed.
Fixes: a4def5edf0fc ("i40e: enable port mirroring")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Lijuan Tu <lijuanx.a.tu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
