Add check to avoid invalid VF queue number is used in
tunnel filter.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
When deleting the default MAC VLAN filter, it's
expected that it may fail.
So downgrade the error print from warning to
debug.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Change level of log message from ERR to DEBUG and reword it,
in the i40e_dev_consistent_tunnel_filter_set() function.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
In rx vector mode, QinQ is not supported.
When hw_vlan_extend is set for QinQ ensure that
rx vector mode is not selected.
Fixes: 8e109464c022 ("i40e: allow vector Rx and Tx usage")
Cc: stable@dpdk.org
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
When receiving the unsupported AQ messages, it's taken as
an error. It's not appropriate and triggers too much
unnecessary print.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
VF link status rely on PF's notification, so when PF link status
be updated, it should notify VF to update link status also.
Current implementation only cover part of the situation when PF's link
status is updated, call i40e_notify_all_vfs_link_status in
i4e_dev_link_update will cover all situationa.
Fixes: bb6722fb5c0e ("net/i40e: fix VF bonded device link down")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
The patch adds 4 APIs to support configurable
PTYPE mapping for i40e device.
rte_pmd_i40e_ptype_mapping_get.
rte_pmd_i40e_ptype_mapping_replace.
rte_pmd_i40e_ptype_mapping_reset.
rte_pmd_i40e_ptype_mapping_update.
The mapping from hardware defined packet type to software defined packet
type can be updated/reset/read out with these APIs.
Also a software ptype with the most significent bit set will be regarded
as a user defined ptype (RTE_PMD_I40E_PTYPE_USER_DEFINE_MASK) so
application can use it to defined its own PTYPE naming system.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
The mapping from hardware defined packet type to software defined
packet type is static for i40e device, the patch let each ethdev to
to have their own copy of mapping table, this give the possibility
that different ethdev can be set different PTYPE mapping rule which
is the requirement to support following hardware's dynamic PTYPE
feature.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
According to HW implementation, the bandwidth of QoS
means the L2 bandwidth, not count the bytes added by
physical layer.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
To keep consistent with previous release, Priority Flow Control (PFC)
need to be disabled by default. This patch fixes it.
This also fixes an issue where traffic was not forwarded by testpmd
occasionally. In those cases ~4770 pps seen on one of the ports rather
than the full rate (>20mpps).
Fixes: 6f0a707e5b55 ("net/i40e: enable DCB on SRIOV VFs")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
There are some new PCTYPEs on X722, but they have not been announced
on the RTE lib, so if it can not set corresponding hash input set for
these packet type, the hash function won’t work.
So we need to handle them base on the translation of the new
PCTYPE and the original PCTYPE.
Fixes: b6a0ec418274 ("i40e: use AQ for Rx control register read/write")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Porting two changes from x86 SSE implematation.
net/i40e: fix checksum flag in x86 vector Rx
net/i40e: eliminate mbuf write on rearm
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Having packets received without any offload flags given in the mbuf is not
very useful, and performance tests with testpmd indicates little to no
benefit is got with the current code by turning off the flags. This makes
the build-time option pointless, so we can remove it.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
With the mbuf rework, we now have 8 contiguous bytes to be rearmed in the
mbuf just before the 8-bytes of olflags. If we don't do the rearm write
inside the descriptor ring replenishment function, and delay it to
receiving the packet, we can do a single 16B write inside the RX function
to set both the rearm data, and the flags together.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
When PF notify link speed to VF, encode of link speed need to
be converted from ETH_SPEED_XXX to I40E_LINK_SPEED_XXX.
Fixes: bb6722fb5c0e ("net/i40e: fix VF bonded device link down")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Make i40e_notify_all_vfs_link_status as a wrapper of
i40e_notify_vf_link_status so duplicate code can be removed.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
The eth keyword only should be accepted.
Fixes: d37705068ee8 ("net/i40e: parse QinQ pattern")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
function i40evf_add_del_all_mac_addr without check return
value of rte_zmalloc
Fixes: 97ac72aa71a9 ("i40e: support setting VF MAC address")
Cc: stable@dpdk.org
Signed-off-by: Henry Cai <caihe@huawei.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
The patch change the prototype of callback function
(rte_intr_callback_fn) by removing the unnecessary parameter.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Failed to destroy tunnel filter rule if the action of
the tunnel filter is VF, root cause is the wrong vsi
used.
Fixes: c50474f31efe ("net/i40e: support tunnel filter to VF")
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
To avoid multiple stores on fast path, Ethernet drivers
aggregate the writes to data_off, refcnt, nb_segs and port
to an uint64_t data and write the data in one shot
with uint64_t* at &mbuf->rearm_data address.
Some of the non-IA platforms have store operation overhead
if the store address is not naturally aligned.This patch
fixes the performance issue on those targets.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Now that the m->next pointer and m->nb_segs is expected to be set (to
NULL and 1 respectively) after a mempool_get(), we can avoid to write them
in the Rx functions of drivers.
Only some drivers are patched, it's not an exhaustive patch. It gives
the idea to do the same in other drivers.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Document the function and make it public, since it is used at several
places in the drivers. The old one is marked as deprecated.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
After adding VLAN filter, the VLAN promiscuous mode is
disabled. But there's no chance to enable it.
So add the check after deleting VLAN filter. If there's
no VLAN filter left, enable the VLAN promiscuous mode.
Fixes: 9f0645cd147c ("net/i40e: fix VLAN filter")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The QinQ filter uses big buffers, set the big_buffer flag
when restoring a QinQ filter.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The QinQ filter uses big buffers, set the big_buffer flag
when removing a QinQ filter.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add i40e_cloud_filter_qinq_create function, and call it
from i40e_dev_consistent_tunnel_filter_set function.
Replace the Outer IP filter with the QinQ filter.
QinQ allows multiple VLAN tags to be inserted into a single Ethernet
frame. A QinQ frame is a frame that has two VLAN 802.1Q headers.
802.1Q tunneling (QinQ) is a technique often used by Metro Ethernet
providers as a layer 2 VPN for customers.
Signed-off-by: Laura Stroe <laura.stroe@intel.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The L3 MAP register is initialised to support QinQ
cloud filters.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
MPLSoUDP & MPLSoGRE is not supported by tunnel
filter due to limited resource of HW, this patch
enables MPLS tunnel filter by replacing inner_mac
filter.
This configuration will be set when adding MPLSoUDP
and MPLSoGRE filter rules, and it will be invalid
only by NIC core reset.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch add MPLS parsing function to support MPLS filtering.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add i40e_tunnel_type enumeration type to refine consistent
tunnel filter, it will be esay to add new tunnel type for
i40e.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Previously, only tunnel filter to PF is supported.
This patch adds i40e_dev_consistent_tunnel_filter_set
function for consistent filter API to support tunnel
filter to VF.
Signed-off-by: Yong Liu <yong.liu@intel.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Change tunnel filter function name to VXLAN filter
function, prepare for other tunnel filter function.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Rework tunnel filter functions to align with the
new command buffer for add/remove cloud filter.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
To add a wrapper function to remove the limit of tx burst size. The patch
makes i40e vec function an best effort to transmit the pkts in the
consistent behavior like i40e_xmit_pkts_simple and i40e_xmit_pkts do that.
Cc: Helin Zhang <helin.zhang@intel.com>
Cc: Jingjing Wu <jingjing.wu@intel.com>
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Set some TCs to strict priority mode.
It's a global setting on a physical port.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Set a specific TC's max bandwidth on a VF.
User can call the API to set VF TC's max bandwidth
from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Allocate all TCs' relative bandwidth (percentage) on
a specific VF.
It can be taken as relative min bandwidth setting.
User can call the API to set VF TC's min bandwidth
from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Support setting VF max bandwidth from PF.
User can call the API on PF to set a specific VF's
max bandwidth.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
VLAN filter is not working on i40e because driver need to
disable the VLAN promiscuous mode and set the VLAN filter
table.
Fixes: 5f2b0e3f7656 ("net/i40e: set VF VLAN filter from PF")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add new admin queue function and extended fields for cloud filter:
- Add admin queue function for Replace filter command (Opcode: 0x025F)
- Define big buffer for extended general fields in Add/Remove
Cloud filters command
Signed-off-by: Laura Stroe <laura.stroe@intel.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
