Found with clang static analysis:
lib/librte_ether/rte_ethdev.c:2467:22:
warning: Value stored to 'dev' during its initialization is never read
struct rte_eth_dev *dev = &rte_eth_devices[port_id];
^~~ ~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 88ac4396ad29 ("ethdev: add VMDq support")
Signed-off-by: Emmanuel Roullit <emmanuel.roullit@gmail.com>
This patch fixes a bug in replaying MAC address to the hardware
in rte_eth_dev_config_restore() routine. Added default MAC replay as well.
Fixes: 4bdefaade6d1 ("ethdev: VMDQ enhancements")
Signed-off-by: Steve Shin <jonshin@cisco.com>
Reviewed-by: Igor Ryzhov <iryzhov@nfware.com>
Fix an silly error by auto-complete while managing the merge conflicts.
It's the eth_dev_data (but not eth_dev) entry should be memset.
Fixes: d948f596fee2 ("ethdev: fix port data mismatched in multiple process model")
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
check if the rule is a L2 tunnel rule, and get the L2 tunnel info.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
remove the following API's:
rte_eth_dev_set_vf_rxmode
rte_eth_dev_set_vf_rx
rte_eth_dev_set_vf_tx
rte_eth_dev_set_vf_vlan_filter
rte_eth_dev_set_vf_rate_limit
Increment LIBABIVER in Makefile
Remove deprecation notice for removing rte_eth_dev_set_vf_* API's.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
This patch adds a new API 'rte_eth_dev_fw_version_get' for
fetching firmware version by a given device.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Assume we have two virtio ports, 00:03.0 and 00:04.0. The first one is
managed by the kernel driver, while the later one is managed by DPDK.
Now we start the primary process. 00:03.0 will be skipped by DPDK virtio
PMD driver (since it's being used by the kernel). 00:04.0 would be
successfully initiated by DPDK virtio PMD (if nothing abnormal happens).
After that, we would get a port id 0, and all the related info needed
by virtio (virtio_hw) is stored at rte_eth_dev_data[0].
Then we start the secondary process. As usual, 00:03.0 will be firstly
probed. It firstly tries to get a local eth_dev structure for it (by
rte_eth_dev_allocate):
port_id = rte_eth_dev_find_free_port();
...
eth_dev = &rte_eth_devices[port_id];
eth_dev->data = &rte_eth_dev_data[port_id];
...
return eth_dev;
Since it's a first PCI device, port_id will be 0. eth_dev->data would
then point to rte_eth_dev_data[0]. And here things start going wrong,
as rte_eth_dev_data[0] actually stores the virtio_hw for 00:04.0.
That said, in the secondary process, DPDK will continue to drive PCI
device 00.03.0 (despite the fact it's been managed by kernel), with
the info from PCI device 00:04.0. Which is wrong.
The fix is to attach the port already registered by the primary process.
That is, iterate the rte_eth_dev_data[], and get the port id who's PCI
ID matches the current PCI device.
This would let us maintain same port ID for the same PCI device, keeping
the chance of referencing to wrong data minimal.
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
If these flags are advertised by a PMD, the NIC supports the MACsec
offload. The incoming MACsec traffics can be offloaded transparently
after the MACsec offload is configured correctly by the application.
And the application can set the PKT_TX_MACSEC flag in mbufs to enable
the MACsec offload for the packets to be transmitted.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
This commit adds a below event type:
- RTE_ETH_EVENT_MACSEC
This event will occur when the PN counter in a MACsec connection
reaches the exhaustion threshold.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Attaching and detaching ethernet ports from an application
is not the same thing as physically removing a PCI device,
so clarify the flags indicating support. All PCI devices
are assumed to be physically removable, so no flag is
necessary in the PCI layer.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Leaving default pattern item mask values up for interpretation by PMDs is
an undefined behavior that applications might find difficult to use in the
wild. It also needlessly complicates PMD implementation.
This commit addresses this by defining consistent default masks for each
item type.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Contrary to the current description, mbuf RSS hash result storage does not
overlap with the returned MARK value (hash.fdir.lo vs. hash.fdir.hi), and
both may be combined.
Reflect this change by allowing testpmd to display both values
simultaneously.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Both actions share the PKT_RX_FDIR mbuf flag, as a result there is no way
to tell them apart. Moreover, the maximum allowed value for the MARK action
may not necessarily cover the entire 32-bit space.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Based on initial PMD implementations of the flow API, returning the error
structure which may be NULL is useless and always discarded.
Returning the error code instead appears to be much more convenient.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Added API for `rte_eth_tx_prepare`
uint16_t rte_eth_tx_prepare(uint8_t port_id, uint16_t queue_id,
struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
Added fields to the `struct rte_eth_desc_lim`:
uint16_t nb_seg_max;
/**< Max number of segments per whole packet. */
uint16_t nb_mtu_seg_max;
/**< Max number of segments per one MTU */
These fields can be used to create valid packets according to the
following rules:
* For non-TSO packet, a single transmit packet may span up to
"nb_mtu_seg_max" buffers.
* For TSO packet the total number of data descriptors is "nb_seg_max",
and each segment within the TSO may span up to "nb_mtu_seg_max".
Added functions:
int
rte_validate_tx_offload(struct rte_mbuf *m)
to validate general requirements for tx offload set in mbuf of packet
such a flag completness. In current implementation this function is
called optionaly when RTE_LIBRTE_ETHDEV_DEBUG is enabled.
int rte_net_intel_cksum_prepare(struct rte_mbuf *m)
to prepare pseudo header checksum for TSO and non-TSO tcp/udp packets
before hardware tx checksum offload.
- for non-TSO tcp/udp packets full pseudo-header checksum is
counted and set.
- for TSO the IP payload length is not included.
int
rte_net_intel_cksum_flags_prepare(struct rte_mbuf *m, uint64_t ol_flags)
this function uses same logic as rte_net_intel_cksum_prepare, but
allows application to choose which offloads should be taken into
account, if full preparation is not required.
PERFORMANCE TESTS
-----------------
This feature was tested with modified csum engine from test-pmd.
The packet checksum preparation was moved from application to Tx
preparation step placed before burst.
We may expect some overhead costs caused by:
1) using additional callback before burst,
2) rescanning burst,
3) additional condition checking (packet validation),
4) worse optimization (e.g. packet data access, etc.)
We tested it using ixgbe Tx preparation implementation with some parts
disabled to have comparable information about the impact of different
parts of implementation.
IMPACT:
1) For unimplemented Tx preparation callback the performance impact is
negligible,
2) For packet condition check without checksum modifications (nb_segs,
available offloads, etc.) is 14626628/14252168 (~2.62% drop),
3) Full support in ixgbe driver (point 2 + packet checksum
initialization) is 14060924/13588094 (~3.48% drop)
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The function rte_eth_xstats_get() return an array of tuples (id,
value). The value is the statistic counter, while the id references a
name in the array returned by rte_eth_xstats_get_name().
Today, each 'id' returned by rte_eth_xstats_get() is equal to the index
in the returned array, making this value useless. It also prevents a
driver from having different indexes for names and value, like in the
example below:
rte_eth_xstats_get_name() returns:
0: "rx0_stat"
1: "rx1_stat"
2: ...
7: "rx7_stat"
8: "tx0_stat"
9: "tx1_stat"
...
15: "tx7_stat"
rte_eth_xstats_get() returns:
0: id=0, val=<stat> ("rx0_stat")
1: id=1, val=<stat> ("rx1_stat")
2: id=8, val=<stat> ("tx0_stat")
3: id=9, val=<stat> ("tx1_stat")
This patch fixes the drivers to set the 'id' in their ethdev->xstats_get()
(except e1000 which was already doing it), and fixes ethdev by not setting
the 'id' field to the index of the table for pmd-specific stats: instead,
they should just be shifted by the max number of generic statistics.
Fixes: bd6aa172cf35 ("ethdev: fetch extended statistics with integer ids")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This makes struct rte_eth_dev independent of struct rte_pci_device by
replacing it with a pointer to the generic struct rte_device.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Only the drivers itself can decide if it could fill PCI information fields
of dev_info.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The struct rte_intr_handle is an abstraction layer for different types of
interrupt mechanisms. It is embedded in the low-level device (e.g. PCI).
On allocation of a struct rte_eth_dev a reference to the intr_handle
should be stored for devices supporting interrupts.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This new API supersedes all the legacy filter types described in
rte_eth_ctrl.h. It is slightly higher level and as a result relies more on
PMDs to process and validate flow rules.
Benefits:
- A unified API is easier to program for, applications do not have to be
written for a specific filter type which may or may not be supported by
the underlying device.
- The behavior of a flow rule is the same regardless of the underlying
device, applications do not need to be aware of hardware quirks.
- Extensible by design, API/ABI breakage should rarely occur if at all.
- Documentation is self-standing, no need to look up elsewhere.
Existing filter types will be deprecated and removed in the near future.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
- Grouped related items using empty lines
- Aligned arguments to same column
- All item comments that doesn't fit same line are placed blow the item
itself
- Moved some comments to same line if overall line < 100 chars
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
If all queues are released lets also free up the dev->data->rx/tx_queues
to be able to properly reinitialize.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
This moves the non-PCI related initialization of the link state interrupt
callback list and the setting of the default MTU to rte_eth_dev_allocate()
so that drivers only need to set non-default values.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Lets clear the eth_dev->data when allocating a new rte_eth_dev so that
drivers only need to set non-zero values.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Aside from avoiding doing useless work, this also fixes a segfault
when calling rte_eth_dev_get_port_by_name() whenever no devices
were found yet, and therefore rte_eth_dev_data wasn't yet allocated.
Fixes: 9c5b8d8b9feb ("ethdev: clean port id retrieval when attaching")
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Arrays inside rte_eth_stats have size=RTE_ETHDEV_QUEUE_STAT_CNTRS.
Some devices report more queues than that and this code blindly uses
the reported number of queues by the device to fill those arrays up.
This patch fixes the problem using MIN between the reported number of
queues and RTE_ETHDEV_QUEUE_STAT_CNTRS.
Fixes: ce757f5c9a4d ("ethdev: new method to retrieve extended statistics")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Add comments to describe that not all statistics fields in
struct rte_eth_stats are supported by any type of network
interface card. If any statistics field is not supported,
its value is 0.
Signed-off-by: Wei Dai <wei.dai@intel.com>
The library was named libethdev without rte_ prefix.
It is now fixed, the library namespace is consistent.
Note: the ABI version has already been changed in this release cycle.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
rte_device/driver generalization patches [1] were merged without a change
in the LIBABIVER variable. This patches bumps the macro of affected libs:
- libcryptodev and libetherdev have been bumped
- librte_eal version changed in
d7e61ad3ae36 ("log: remove deprecated history dump")
Details of ABI/API changes:
- EAL [version already bumped in: d7e61ad3ae36]
|- type field was removed from rte_driver
|- rte_pci_device now embeds rte_device
|- rte_pci_resource renamed to rte_mem_resource
|- numa_node and devargs of rte_pci_driver is moved to rte_driver
|- APIs for device hotplug (attach/detach) moved into EAL
|- API rte_eal_pci_device_name added for PCI device naming
|- vdev registration API introduced (rte_eal_vdrv_register,
| rte_eal_vdrv_unregister
- librte_crypto (v 1=>2)
|- removed rte_cryptodev_create_unique_device_name API
|- moved device naming to EAL
- librte_ethdev (v 4=>5)
|- rte_eth_dev_type is removed
|- removed dev_type from rte_eth_dev_allocate API
|- removed API rte_eth_dev_get_device_type
|- removed API rte_eth_dev_get_addr_by_port
|- removed API rte_eth_dev_get_port_by_addr
|- removed rte_cryptodev_create_unique_device_name API
|- moved device naming to EAL
Also, deprecation notice from 16.07 has been removed and release notes for
16.11 added.
[1] http://dpdk.org/ml/archives/dev/2016-September/047087.html
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This change prevents the attempt to add a structure which is
already on the callback list. If a struct with matching
parameters is found on the list, then no action is taken.
Fixes: ac2f69c ("ethdev: fix crash if malloc of user callback fails")
Signed-off-by: E. Scott Daniels <daniels@research.att.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
add cb_arg parameter to the _rte_eth_dev_callback_process function.
Adding a parameter to this function allows passing information
to the application when an eth device event occurs such as
a VF to PF message.
This allows the application to decide if a particular function
is permitted.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Alex Zelezniak <alexz@att.com>
The vdev eth_ring has been renamed to net_ring.
Some unit tests are using the old name and fail.
Fixes also the vdev comments in EAL and ethdev.
Fixes: 2f45703c17ac ("drivers: make driver names consistent")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The proper place for rte_ether.h is in librte_net because it defines
network headers.
Moving it will also prevent to have circular references in the following
patches that will require the Ethernet header definition in rte_mbuf.c.
By the way, fix minor checkpatch issues.
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
If a pci probe operation creates a port but, for any reason, fails to
finish this operation and decides to delete the newly created port, then
the last created port id can not be trusted anymore and any subsequent
attach operations will fail.
This problem was noticed while working on a vm that had a virtio-net
management interface bound to the virtio-net kernel driver and no port
whitelisted in the commandline:
root@ubuntu1404:~/dpdk# ./build/app/testpmd -c 0x6 --
-i --total-num-mbufs=2049
EAL: Detected 3 lcore(s)
EAL: Probing VFIO support...
EAL: Debug logs available - lower performance
EAL: WARNING: cpu flags constant_tsc=yes nonstop_tsc=no -> using
unreliable clock cycles !
EAL: PCI device 0000:00:03.0 on NUMA socket -1
EAL: probe driver: 1af4:1000 (null)
rte_eth_dev_pci_probe: driver (null): eth_dev_init(vendor_id=0x6900
device_id=0x1000) failed
EAL: No probed ethernet devices
^
|
Here, rte_eth_dev_pci_probe() fails since vtpci_init() reports an
error. This results in a rte_eth_dev_release_port() right after a
rte_eth_dev_allocate().
Then, if we try to attach a port using rte_eth_dev_attach:
testpmd> port attach net_ring0
Attaching a new port...
PMD: Initializing pmd_ring for net_ring0
PMD: Creating rings-backed ethdev on numa socket 0
Two solutions:
- either update the last created port index to something invalid
(when freeing a ethdev port),
- or rely on the port count, before and after the eal attach.
The latter solution seems (well not really more robust but at least)
less fragile than the former.
We still have some issues with drivers that create multiple ethdev
ports with a single probe operation, but this was already the case.
Fixes: b0fb26685570 ("ethdev: convert to EAL hotplug")
Reported-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
To enable Tx side offload on tunneling packet, driver should set
correct tunneling parameters: (1) EIPT, External IP header type;
(2) EIPLEN, External IP; (3) L4TUNT; (4) L4TUNLEN. This parsing
behavior is based on (ol_flag & PKT_TX_TUNNEL_MASK). And when
it's a tunneling packet, MACLEN defines the outer L2 header.
Also, we define TSO on each kind of tunneling type as a capabilities.
Now only i40e declares to support them.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The "imissed" stats represent RX packets dropped by the HW,
so we should not talk about mbufs as the hardware is not aware
of this structure. Buffer seems to be a better word.
Fixes: 4eadb8ba11b7 ("ethdev: do not deprecate imissed counter")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Now that rte_device is available, drivers can start using its members
(numa, name) as well as link themselves into another rte_device list.
As of now no one is using this list, but can be used for moving over all
devices (pdev/vdev/Xdev) and perform bulk actions (like cleanup).
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
[Shreyansh: Reword commit log for extra rte_device list]
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Remove the 'name' member from rte_pci_driver and move to generic
rte_driver.
Most of the PMD drivers were initially using DRIVER_REGISTER_PCI(<name>..)
as well as assigning a name to eth_driver.pci_drv.name member.
In this patch, only the original DRIVER_REGISTER_PCI(<name>..) name has
been populated into the rte_driver.name member - assignments through
eth_driver has been removed.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
[Shreyansh: Rebase and expand changes to newly added files]
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Now that hotplug has been moved to eal, there is no reason to keep the
device type in this layer.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Remove bus logic from ethdev hotplug by using eal for this.
Current api is preserved:
- the last port that has been created is tracked to return it to the
application when attaching,
- the internal device name is reused when detaching.
We can not get rid of ethdev hotplug yet since we still need some
mechanism to inform applications of port creation/removal to substitute
for ethdev hotplug api.
dev_type field in struct rte_eth_dev and rte_eth_dev_allocate are kept as
is, but this information is not needed anymore and is removed in the
following commit.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
No need to scan all devices, we only need to update the device being
attached.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
- Move rte_eth_dev_create_unique_device_name() from ether/rte_ethdev.c to
common/include/rte_pci.h as rte_eal_pci_device_name(). Being a common
method, can be used across crypto/net PCI PMDs.
- Remove crypto specific routine and fallback to common name function.
- Introduce a eal private Update function for PCI device naming.
Signed-off-by: David Marchand <david.marchand@6wind.com>
[Shreyansh: Merge crypto/pci helper patches]
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Simplify crypto and ethdev pci drivers init by using newly introduced
init macros and helpers.
Those drivers then don't need to register as "rte_driver"s anymore.
Exceptions:
- virtio and mlx* use RTE_INIT directly as they have custom initialization
steps.
- VDEV devices are not modified - they continue to use PMD_REGISTER_DRIVER.
Update documentation for replacing an example referring to
PMD_REGISTER_DRIVER.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
crypto and ethdev drivers aligned to PCI probe/remove. These wrappers are
mapped directly to PCI resources.
Existing handlers for init/uninit can be easily reused for this.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Probe and Remove are more appropriate names for PCI init and uninint
operations. This is a cosmetic change.
Only MLX* uses the PCI direct registration, bypassing PMD_* macro.
The callbacks for this too have been updated.
VDEV are left out. For them, init/uninit are more appropriate.
Suggested-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: David Marchand <david.marchand@6wind.com>
