The driver setting of "allow_experimental_apis" was not being used when
building the base code. To allow this we can manually put in a check
in the base code files for the setting and set the appropriate cflag
if it's needed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tested-by: Ilya Maximets <i.maximets@samsung.com>
If the device is not clearly reset by the previous driver and holds
some invalid ring addr, and the relay thread kicks it before HW is
properly re-configured, a bad DMA request may happen.
Besides, the notify_addr which is used by the relay thread is set in
the vdpa_ifcvf_start function, if a kick relay happens before
vdpa_ifcvf_start finishes, a null addr is accessed.
Fixes: a3f8150eac6d ("net/ifcvf: add ifcvf vDPA driver")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Remove driver log when no interrupt event indicated
in alarm handler for both PF and VF, otherwise there
will be lots of prints which makes console unusable.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
For IA, the AVX2 vector path is only recommended to be used on later
platforms (identified by AVX512 support, like SKL etc.) This is because
performance benchmark shows downgrade when running AVX2 vector path on
early platform (BDW/HSW) in some cases. But we still observe perf gain
with some real work loading.
So this patch introduced the new devarg use-latest-supported-vec to
force the driver always selecting the latest supported vec path. Then
apps are able to take AVX2 path on early platforms. And this logic can
be re-used if we will have AVX512 vec path in future.
This patch only affects IA platforms. The selected vec path would be
like the following:
Without devarg/devarg = 0:
Machine vPMD
AVX512F AVX2
AVX2 SSE4.2
SSE4.2 SSE4.2
<SSE4.2 Not Supported
With devarg = 1
Machine vPMD
AVX512F AVX2
AVX2 AVX2
SSE4.2 SSE4.2
<SSE4.2 Not Supported
Other platforms can also apply the same logic if necessary in future.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Compile Mellanox driver when their external dependencies are met. A
glue version of the driver can still be requested by using the
-Denable_driver_mlx_glue=true
Meson will try to find the required external libraries. When they are
not installed system wide, they can be provided though CFLAGS, LDFLAGS
and LD_LIBRARY_PATH environment variables, example (considering
RDMA-Core is installed in /tmp/rdma-core):
# CLFAGS=-I/tmp/rdma-core/build/include \
LDFLAGS=-L/tmp/rdma-core/build/lib \
LD_LIBRARY_PATH=/tmp/rdma-core/build/lib \
meson output
# LD_LIBRARY_PATH=/tmp/rdma-core/build/lib \
ninja -C output install
Note: LD_LIBRARY_PATH before ninja is necessary when the meson
configuration has changed (e.g. meson configure has been called), in
such situation the LD_LIBRARY_PATH is necessary to invoke the
autoconfiguration script.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Compile Mellanox driver when its external dependencies are met. A
glue version of the driver can still be requested by using the
-Denable_driver_mlx_glue=true
Meson will try to find the required external libraries. When they are
not installed system wide, they can be provided though CFLAGS, LDFLAGS
and LD_LIBRARY_PATH environment variables, example (considering
RDMA-Core is installed in /tmp/rdma-core):
# CLFAGS=-I/tmp/rdma-core/build/include \
LDFLAGS=-L/tmp/rdma-core/build/lib \
LD_LIBRARY_PATH=/tmp/rdma-core/build/lib \
meson output
# LD_LIBRARY_PATH=/tmp/rdma-core/build/lib \
ninja -C output install
Note: LD_LIBRARY_PATH before ninja is necessary when the meson
configuration has changed (e.g. meson configure has been called), in
such situation the LD_LIBRARY_PATH is necessary to invoke the
autoconfiguration script.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
RSS configuration works for all e1000 NICs except 82576.
This patch fixes this issue by correcting queue number
in RSS configuration.
Fixes: 424ae915baf0 ("net/e1000: move RSS to flow API")
Fixes: ac8d22de2394 ("ethdev: flatten RSS configuration in flow API")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Zhao <wei.zhao1@intel.com>
Removing double copy of driver information. 04664e5c8346 has shifted
that from driver's probe to bus's probe.
Fixes: 04664e5c8346 ("drivers/bus: fill driver reference after NXP probing")
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Note that the library built by meson will not have the _uio suffix:
librte_pmd_vmxnet3.so - as it follows the directory name, while the
legacy makefile rename it to librte_pmd_vmxnet3_uio.so.
Signed-off-by: Luca Boccassi <bluca@debian.org>
This PMD is built with -Wno-format, which means GCC errors out if
-Wformat-security is used.
Fixes: e940646b20fa ("drivers/net: build Intel NIC PMDs with meson")
Cc: stable@dpdk.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Comments says "no csum error report support" but there is no check
related csum offloads. Removing the comment.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Integrate accelerated networking support into netvsc PMD.
This allows netvsc to manage VF without using failsafe or vdev_netvsc.
For the exception vswitch path some tests like transmit
get a 22% increase in packets/sec.
For the VF path, the code is slightly shorter but has no
real change in performance.
Pro:
* using netvsc is more like other DPDK NIC's
* the exception packet uses less CPU
* much smaller code size
* no locking required on VF transmit/receive path
* no legacy Linux network device to get mangled by userspace
* much simpler (1K vs 9K) LOC
* unified extended statistics
Con:
* using netvsc has more complex startup model
* no bifurcated driver support
* no flow support (since host does not have flow API).
* no tunnel offload support
* no receive interrupt support
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Implement callback functionality on link state changes.
This is not really driven off of interrupt file descriptor like most other
PMD's. Instead, it happens when a link state change message arrives
in the common ring buffer.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
If application sends faster than vswitch can keep up, then the
transmit descriptor pool will be exhausted. This is not a failure
so change the name statistic and don't include it in oerrors.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Bonding driver ignores the value of RSS key (that is set in the port RSS
configuration) in bond_ethdev_configure(). So the only way to set
non-default RSS key is by using rss_hash_update(). This is not an
expected behaviour.
Make the bond_ethdev_configure() set default RSS key only if
requested key is set to NULL.
Fixes: 734ce47f71e0 ("bonding: support RSS dynamic configuration")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Chas Williams <chas3@att.com>
Default Redirection Table that is set in bonding driver is distributed
evenly over all Rx queues only within every RETA group (the first RETA
entries in every group are always start with zero). But in the most
drivers, default RETA is distributed over all Rx queues without sequence
resets in the beginning of a new group, which implies more balanced
per-core load.
Change the default RETA to be evenly distributed over all Rx queues
considering the whole table.
Fixes: 734ce47f71e0 ("bonding: support RSS dynamic configuration")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Chas Williams <chas3@att.com>
Add flow operations to match packets based on destination MAC address.
Allocate and program hardware MPS table with the destination MAC
address to be matched against. The returned MPS index is then used while
offloading flows to LETCAM (maskfull) and HASH (maskless) filter regions.
Also update existing mac_addr_set() to use the new MPS table API.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add API to program and manage hardware Multi Port Switch table. MPS
holds destination MAC addresses to be matched against incoming packets
for further rule processing. Packets not matching any entry in MPS table
will be dropped by default, unless the underlying port is in promiscuous
mode.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add flow API operations to offload vlan push, pop, and rewrite actions.
For vlan push or rewrite actions, allocate and program an entry from
L2T table. Use the L2T index to program vlan actions for LETCAM
(maskfull) and HASH (maskless) filters.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add API to program and manage hardware Layer 2 Table. L2T holds
information necessary to rewrite specific fields in packet, such
as destination MAC address and vlan id.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
>From the Intel Ethernet Controller X710/XXV710/XL710 Specification
Update:
Starting from NVM 5.02, if the Set Local LLDP MIB command is
received while the DCBx specific agent is stopped, the command
returns an EPERM error. If the command is received while the
LLDP agent is stopped, it sets the local MIB without exchanging
LLDP with peer, and returns SUCCESS.
This results in the harmless, but annoying, diagnostic:
default dcb config fails. err = -53, aq_err = 1.
So, if possible (older firmwares cannot safely stop LLDP), stop the
LLDP daemon when we are in software mod before we attempt to call
i40e_set_dcb_config.
Signed-off-by: Chas Williams <chas3@att.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds alarm handler, and then i40e
PF will use alarm handler instead of interrupt
handler when device is started and Rx interrupt
mode is disabled. This way will save CPU cycles
during receiving packets.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch checks negotiated features to see if necessary to offload
before set the tap device offload capabilities. It also checks if kernel
support the TUNSETOFFLOAD operation.
Fixes: 5e97e4202563 ("net/virtio-user: enable offloading")
Cc: stable@dpdk.org
Signed-off-by: Eric Zhang <eric.zhang@windriver.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Rxq cq_ci was 16 bits while hardware is expecting to wrap
around 24 bits, this caused interrupt failure after burst of packets.
Fixes: 43e9d9794cde ("net/mlx5: support upstream rdma-core")
Cc: stable@dpdk.org
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
In case of a temporary failure the ixgbe driver can return the internal
error IXGBE_ERR_RESET_FAILED to the application. Instead, return
-EAGAIN as per the public API specification.
Fixes: cddaf87a1ecb ("lib: fix unused values")
Cc: stable@dpdk.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When bond slave devices cannot transmit all packets in bufs array,
tx_burst callback shall merge the un-transmitted packets back to
bufs array. Recent merge logic introduced a bug which causes
invalid mbuf addresses being written to bufs array.
When caller frees the un-transmitted packets, due to invalid addresses,
application will crash.
The fix is avoid shifting mbufs, and directly write un-transmitted
packets back to bufs array.
Fixes: 09150784a776 ("net/bonding: burst mode hash calculation")
Cc: stable@dpdk.org
Signed-off-by: Jia Yu <jyu@vmware.com>
Acked-by: Chas Williams <chas3@att.com>
Some NFP firmwares support live changes to the MAC address, but
this is not always true and the firmware advertises it accordingly.
This patch checks if firmware does not support live changes and
sets RTE_ETH_DEV_NOLIVE_MAC_ADDR in that case.
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Mark internal variables static to avoid potential redefinition
errors later on.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Reviewed-by: Yelena Krivosheev <yelena@marvell.com>
Fix used_bpools array initialization by using range initializer.
This way all necessary variables are properly initialized regardless
of PP2_NUM_PKT_PROC value.
Fixes: 0ddc9b815b11 ("net/mrvl: add net PMD skeleton")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
On the code after the below commits, the criteria to select the IPV4 or
IPV6 hash functions was the existence of some ETH_RSS_IPV4 RSS types on
the flow rule.
The check is wrong. For example ETH_RSS_NONFRAG_IPV4_TCP will not select
the IPV4 hash which will cause the packet to be spread in a bad way.
Fix it by adding the corresponding types needed for each hash selection.
Fixes: 592f05b29a25 ("net/mlx5: add RSS flow action")
Fixes: fd0b70316bca ("net/mlx5: support inner RSS computation")
Cc: stable@dpdk.org
Reported-by: Yaroslav Brustinov <ybrustin@cisco.com>
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
On ConnectX-4 Lx the Multi Packet Send (MPW) feature is considered
un-secure, as on some cases were the application provides incorrect mbufs
on the Tx burst the host or NIC can get stuck.
Hence, disabling the feature by default for this specific NIC.
Users can still enable this feature and enjoy the performance gain
(mostly for low number of cores) by using the txq_mpw_en devarg.
This patch will impact the out of the box performance of some application
using ConnectX-4 Lx for the sack of security and robustness.
Since we need different defaults based on the underlying device the mpw
field in the configuration struct was extended to contain also the
MLX5_ARG_UNSET option.
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
LMTST does not guarantee packet content get synced with L2C when
HW access the packet for transmitting.
Adding coherent IO write barrier will make sure HW sees the correct
packet if its modified.
Fixes: 9e747589bd4c ("net/octeontx: add packet transmit burst function")
Cc: stable@dpdk.org
Reported-by: Vikas Aggarwal <vikas.aggarwal@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The event buffer was changed to be a fixed size value,
had a couple of issues. The big one is that rte_free was still
being called for a pointer that was not setup with rte_malloc().
The event buffer was also too small to handle heavy receive
traffic; and running the event buffer out would crash
the application.
Fix by going back to a dynamically resized event buffer.
And grow it by 25% to avoid lots of realloc's.
Fixes: 530af95a7849 ("bus/vmbus: avoid signalling host on read")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Add tx_done_cleanup ethdev hook to allow application to
control if/when it wants completions to be handled.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Tune the vmbus connection so the host scans faster. This improves
transmit performance. The host default value is 100us but setting
to 50us reduces packet loss significantly.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Fix the error handling in setting up transmit buffer.
If setting up chimney buffer fails, then it is not connected so
no need to send disconnect.
Allow for some unused area if full area is not used.
Fixes: 4e9c73e96e83 ("net/netvsc: add Hyper-V network device")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
