The VLAN fields in the NIC filter use little endian. The VLAN item is
in big endian, so swap bytes.
Fixes: 6ced137607d0 ("net/enic: flow API for NICs with advanced filters enabled")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Some apps like VPP use a raw item to match UDP tunnel headers like
VXLAN or GENEVE. The NIC hardware supports such usage via L5 match,
which does pattern match on packet data immediately following the
outer L4 header. Accept raw items for these limited use cases.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Some apps like VPP use PASSTHRU+MARK flow rules to offload packet
matching to the NIC. Just like MARK+RSS used by OVS-DPDK and others,
PASSTHRU+MARK is used to "mark and then receive normally". Recent VIC
adapters support such flow rules, so enable PASSTHRU for this limited
use case.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Some apps like OVS-DPDK use MARK+RSS flow rules in order to offload
packet matching to the NIC. The RSS action in such flow rules simply
indicates "receive packet normally", not trying to override the port
wide RSS. The action is included in the flow rules simply to terminate
them, as MARK is not a fate-deciding action. And, the RSS action has a
most basic config: default hash, level, types, null key, and identity
queue mapping.
Recent VIC adapters can support these "mark and receive" flow
rules. So, enable support for RSS action for this limited use case.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
The driver currently accepts mark ID 0 but does not report it in
matching packet's mbuf. For example, the following testpmd command
succeeds. But, the mbuf of a matching IPv4 UDP packet does not have
PKT_RX_FDIR_ID set.
flow create 0 ingress pattern ... actions mark id 0 / queue index 0 / end
The problem has to do with mapping mark IDs (32-bit) to NIC filter
IDs. Filter ID is currently 16-bit, so values greater than 0xffff are
rejected. The firmware reserves filter ID 0 for filters that do not
mark (e.g. steer w/o mark). And, the driver reserves 0xffff for the
flag action. This leaves 1...0xfffe for app use.
It is possible to simply reject mark ID 0 as unsupported. But, 0 is
commonly used (e.g. OVS-DPDK and VPP). So, when adding a filter, set
filter ID = mark ID + 1 to support mark ID 0. The receive handler
subtracts 1 from filter ID to get back the original mark ID.
Fixes: dfbd6a9cb504 ("net/enic: extend flow director support for 1300 series")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
This is the main patch which renames the macros, functions,
structs and any remaining strings in the iavf code.
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Rename Intel Ethernet Adaptive Virtual Function driver avf to iavf.
This is the first patch which will only renames the directory name,
lib name, filenames and updates the new name in makefile and meson
files. Also updates the #include files in source files.
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The API function rte_eth_dev_fw_version_get() is querying drivers
via the operation callback fw_version_get().
The implementation of this operation is added for mlx4 and mlx5.
Both functions are copying the same ibverbs field fw_ver
which is retrieved when calling ibv_query_device[_ex]()
during the port probing.
It is tested with command "drvinfo" of examples/ethtool/.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Some drivers (mlx, mvpp2, sfc) support the flow isolated mode,
but the feature was not advertised.
A reference to the feature description is added for each driver.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
A doc page (.rst file) can be referenced with :doc: syntax
instead of :ref: to .. anchor.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Mellanox EN package is supported along with Mellanox OFED. Mellanox EN is
distriubuted for Ethernet users.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
ENAv2 hardware provides Low Latency Queue v2 (LLQv2). It needs kernel
PCI driver to support write combining (WC). This patch add information
how to use it with igb_uio and vfio-pci drivers.
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
1. Fix the lldp stop condition check - for firmware
versions 6.01(for X710)/3.33(for X722) or later we need stop the lldp
2. deferred stats reset in dev_init to avoid some noise be counted.
3. Document known issue for tx bytes decreasing due to link status change
Fixes: 044846f071cc ("net/i40e: stop LLDP before setting local LLDP MIB")
Cc: stable@dpdk.org
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Enable the APIs for unicast and multicast promiscuous
mode setting.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch fixes an error in ifc NIC document; a previous patch
changed the semantics to use CONFIG_RTE_LIBRTE_IFC_PMD
instead of CONFIG_RTE_LIBRTE_IFCVF_VDPA_PMD,
but the ifc NIC doc file remained with the old name.
Fixes: 4b614e9504a1 ("net/ifc: make driver name consistent")
Cc: stable@dpdk.org
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Rx packet padding is supposed to be set by an environment variable -
MLX5_PMD_ENABLE_PADDING, but it has been missing for some time by mistake.
Rather than using such a variable, a PMD parameter (rxq_pkt_pad_en) is
added instead.
Fixes: a1366b1a2be3 ("net/mlx5: add reference counter on DPDK Rx queues")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Reviewed-by: Erez Ferber <erezf@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The libraries provided by rdma-core may be statically linked
if enabling CONFIG_RTE_IBVERBS_LINK_STATIC in the make-based build.
If CONFIG_RTE_BUILD_SHARED_LIB is disabled, the applications
will embed the mlx PMDs with ibverbs and the mlx libraries.
If CONFIG_RTE_BUILD_SHARED_LIB is enabled,
the mlx PMDs will embed ibverbs and the mlx libraries.
Support with meson may be added later.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Rename options CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS and
CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS to a single option
CONFIG_RTE_IBVERBS_LINK_DLOPEN.
Rename meson option enable_driver_mlx_glue to ibverbs_link.
There was no good reason for setting a different link option
for mlx4 and mlx5. Having a single common option makes it
easier to understand and unify make and meson systems.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This commit includes the add of:
- ConnectX-6 device ID
- ConnectX-6 SRIOV device ID
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This capability is reported when supported by the current emitting
sub-device. Failsafe PMD itself does not exercise fast free logic.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Updated the doc and release notes on the support for requesting more
queues.
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add ops link_update.
LSC interrupt is also enabled in this patch.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Normally when starting/stopping the device the queue
should be started and stopped. Support them both in
this patch.
Below ops are added,
dev_configure
dev_start
dev_stop
dev_close
dev_reset
rx_queue_start
rx_queue_stop
tx_queue_start
tx_queue_stop
rx_queue_setup
rx_queue_release
tx_queue_setup
tx_queue_release
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Previously, the features list was indicating unsupported ENA PMD
features and were missing few ones, that were actually supported.
The features file was updated, so it is now reflecting current driver
state.
The documentation was updated with the more actual example and features,
especially ones which are ENA and not listed in the features file.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Add the SW assisted VDPA live migration feature into NIC doc.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
As of commit 364e08f2bbc0, DPDK allows an application to send and
receive raw packets using an AF_PACKET and PACKET_MMAP, when using
Linux Kernel. This complements it by adding a simple guide with the
following information:
- An introduction, where a brief explanation of this driver is given,
pointing out the dependency on PACKET_MMAP;
- Which options are supported at configuration time, while setting up an
interface, and it's inherent limitations;
- What the prerequisites are;
- A command line example of how to set up a DPDK port using the
af_packet driver.
Since there's a dependency in PACKET_MMAP, the guide also points to the
original Kernel documentation, so the reader can get more details.
Signed-off-by: Tiago Lam <tiago.lam@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch introduces changes for supporting multiprocess support.
This is trivial for VFs but comes with some limitations for the PF.
Due to restrictions when using NFP CPP interface, just one secondary
process is supported by now for the PF.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
The VIC hardware has 64 MAC filters per vNIC, which can be either
unicast or multicast. Use one half for unicast and the other half for
multicast, as the VIC kernel drivers for Linux and Windows do.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Cisco VIC adapters run firmware. Add the fw_version_get handler to
help diagnostics.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
The imissed counters (number of packets dropped because the queues were
full) were actually reported through xstats as "rx_out_of_buffer"
but was not reported through stats.
Following a recent discussion on the ML, as there is no way to tell the
user if a counter is implemented or not, this should be considered a
bug. For example, user looking at imissed will think the packets are
lost before reaching the device.
Signed-off-by: Tom Barbette <barbette@kth.se>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The DPDK website has a new URL scheme since June 2018.
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>
The references to the figures and tables in the index
are not maintained.
It is probably better to have no list than an incomplete list.
Anyway the usage of such figures list is not obvious.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch adds limitation notice for MLX5 PMD regarding
VXLAN tunnels support on E-Switch Flows.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
