Types defined in efx_types.h are used in efx.h and it is better do
not rely on the header inclusion from somewhere else (typically from
efsys.h).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add more comments to simplify code reading and understanding.
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
This was probably an oversight when support for multiple sensor pages
was added.
Despite being undefined behaviour in C, it probably worked on Intel
x32/x64 as on them bit shift operations wrap round.
Fixes: dfb3b1ce15f6 ("net/sfc/base: import monitors access via MCDI")
Cc: stable@dpdk.org
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Use UINT32_MAX instead of assigning -1 to a uint32_t variable to
resolve "conversion from 'int' to 'uint32_t', signed/unsigned mismatch"
errors produced by the Visual Studio 2017 toolchain [with the default
/W4 /WX C compiler options which set warning level 4 and treat warnings
as errors].
Fixes: 107cf1d792cb ("net/sfc/base: move limits config to ef10 NIC board config")
Cc: stable@dpdk.org
Signed-off-by: Andrew Lee <alee@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Set WORKAROUND_BUG26807 which does the job.
Fix the misunderstanding in the Medford code: i.e. the workaround is
always supported by firmware, but the driver still needs to enable it.
Also, as it now applies to all EF10 controllers, the implementation is
moved to EF10 common place.
Fixes: 94190e3543bf ("net/sfc/base: import SFN8xxx family support")
Fixes: 2b38e7b7b7e1 ("net/sfc/base: add Medford2 support to NIC module")
Cc: stable@dpdk.org
Signed-off-by: Gautam Dawar <gdawar@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Similar to support for efx datapath, Rx interrupt disabling
just avoids rearming the next time.
Signed-off-by: Georgiy Levashov <georgiy.levashov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
When Rx interrupts are disabled, we simply disable rearm when
the interrupt fires the next time. So, the next packet will
trigger interrupt (if it is not happened yet after previous Rx
burst processing).
Signed-off-by: Georgiy Levashov <georgiy.levashov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tx datapath feature bits were useful on migration from the old offload API
to the new one. However, right now it just adds indirection which
complicates code reading and understanding. Also addition of a new
offloads requires addition of a new feature bits and makes patches longer
and harder to understand. So, remove feature bits which correspond to Tx
offloads and simply advertise device and per-queue offloads directly.
Generic code could still mask some offloads if running HW or FW does not
support it.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Rx datapath feature bits were useful on migration from the old offload API
to the new one. However, right now it just adds indirection which
complicates code reading and understanding. Also addition of a new
offloads requires addition of a new feature bits and makes patches longer
and harder to understand. So, remove feature bits which correspond to Rx
offloads and simply advertise device and per-queue offloads directly.
Generic code could still mask some offloads if running HW or FW does not
support it.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Rx queue setup function checks configured MTU to make sure that
no oversized packets can be received. But a following call to
set MTU function might make this check irrelevant.
Add a function to check MTU size against Rx buffer size and
additional Rx queue info, including Rx scatter offload.
Fixes: e961cf425e02 ("net/sfc: support MTU change")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
As stated in the deprecation notice from December 2016,
"the legacy filter API, including rte_eth_dev_filter_supported(),
rte_eth_dev_filter_ctrl() as well as filter types MACVLAN, ETHERTYPE,
FLEXIBLE, SYN, NTUPLE, TUNNEL, FDIR, HASH and L2_TUNNEL, is superseded
by the generic flow API (rte_flow)".
After a long wait of more than two years, the legacy filter API
is marked as deprecated, while still tested with testpmd and
the tep_termination example.
The next step will be to announce a deadline for complete removal.
As preparation of the removal of rte_eth_ctrl.h,
RTE_ETH_FLOW_*, RTE_TUNNEL_TYPE_* and RTE_ETH_HASH_FUNCTION_* definitions
are moved to rte_ethdev.h and rte_flow.h.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Rx refill in one bulk (which is just 8 descriptors) by default is too
aggressive and makes too many MMIO writes (Rx doorbells) if packet rate
is high. Setting default to 1/8 of Rx descriptors number shows good
performance results. Anyway it is a default value which may be
overridden by Rx configuration provided by application.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Handle VXLAN and GENEVE TSO on EF10 native Tx datapath.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Said message cannot be considered as warning since
the PMD anyway reports available offload capabilities
by means of device info interface. Make this log
message informational and improve its formatting
by placing the text itself on the same line.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
As a result, code duplication will be avoided in the current
TSO implementations (EFX and EF10 native). The future patch to
add support for tunnel TSO will also reuse the new function.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Make Tx prepare function able to detect packets with invalid header
size when header linearization is required.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add descriptor space check to Tx prepare function to inform a caller
that a packet that needs more than maximum Tx descriptors of a queue
can not be sent.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tx offloads checks should be done in Tx prepare.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Implement tx_prepare callback. The implementation checks for anything
only in RTE debug mode. No checks are done otherwise because EF10
simple datapath ignores Tx offloads.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Implement tx_prepare callback and update Tx burst function accordingly.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Implement generic checks in Tx prepare function and update Tx burst
function accordingly.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Numbers of extra descriptors required for TSO are EF10-specific
in fact. Highlight it in define names.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Move the check inside xmit function to the branch in which
the check is mandatory. It makes case when TSO header is not
fragmented a bit more faster.
Fixes: 6bc985e41155 ("net/sfc: support TSO in EF10 Tx datapath")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Move the check inside xmit function to the branch in which
the check is mandatory. It makes case when TSO header is not
fragmented a bit more faster.
Fixes: fec33d5bb3eb ("net/sfc: support firmware-assisted TSO")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Phy capabilities are bit offsets in libefx, but was used as bit masks.
Fixes: d23f3a89ab54 ("net/sfc: support link speed and duplex settings")
Fixes: f82e33afbbb9 ("net/sfc: support link speeds up to 100G")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Rename the macro to make things shorter and more comprehensible. For
both meson and make builds, keep the old macro around for backward
compatibility.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The sfc driver was still using RTE_LOGTYPE_PMD which was superseded
by local logging.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Rather than relying on the target machine architecture, use the
size of a pointer from the compiler to determine if we are 64-bits
or not. This allows correct behaviour when you pass -m32 as a compile
option. It also allows us to use this value repeatedly throughout the
repo rather than continually testing for the sizeof(void*).
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Acked-by: Luca Boccassi <bluca@debian.org>
Move duplicate macro to increment per-event type stats to
internal header. These stats are NIC family independent and
stored in generic event queue structure.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Include efx_mcdi.h from main internal header efx_impl.h directly
instead of indirect inclusion via family-specific header.
It avoids duplication and fixes Medford and Medford2 cases where
the header inclusion is lost.
Correctness is still guaranteed by checks in efx_check.h which
require EFSYS_OPT_MCDI for corresponding families and do not
allow to enable the option if no family requires it.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
If event queue timers are not supported, enc_evq_timer_quantum_ns and
enc_evq_timer_max_us should be set to 0. Make sure that division by 0
does not happen in libefx, if public function efx_ev_usecs_to_ticks()
is used in this case.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add EFX_FAMILY_IS_EF10() which may be used as synonym of any EF10-based
NIC family (i.e. Huntigton, Medford or Medford2 at the time of addition).
Suggested-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add EFX_OPTS_EF10() which may be used as synonym of any EF10-based
NIC (i.e. Huntigton, Medford or Medford2 at the time of addition).
Suggested-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Riverhead requires Rx buffer size to be specified in INIT_RXQ.
If the parameter is not supported (e.g. on EF10 family adapters),
zero must be used on INIT_RXQ.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Supports the firmware update mechanism described in SF-121352-AN.
Signed-off-by: Richard Houldsworth <rhouldsworth@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The recently added NO_CONT_EV mode is recommended for when looking for
maximum throughput on 100G links as it allows the firmware to operate
more efficiently. The biggest benefit is when using scatter and jumbo
frames, but it is also necessary to achieve line rate in other cases.
Support for NO_CONT_EV when scatter is disabled is simple - the main
datapath change is to always read the packet length from the prefix,
not the event. This requires storing a flag with the event queue so
the event handler knows NO_CONT_EV mode is in use.
Supporting NO_CONT_EV with scatter would require an API change.
(Now the ee_flags field in efx_evq_t is used on the datapath, move it
next to other fields which are also read on the datapath to try to avoid
reading an additional cache line.)
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The macros are deprecated and are not used anymore, so they can
be deleted.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Symbols for maximum and minimum number of Tx, Rx and event descriptors
are deprecated. They are not used anymore, so they can be deleted.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Use of the macro for calculating a Rx queue size is deprecated. Replace
it with a call to a function that uses descriptor size specified for
every NIC.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Use of the macro for calculating a Rx queue size is deprecated. Replace
it with a call to a function that uses descriptor size specified for
every NIC.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
