Use common initialization to reduce boilerplate code.
Signed-off-by: Dmitri Epshtein <dima@marvell.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Reviewed-by: Natalie Samsonov <nsamsono@marvell.com>
With this patch, fslmc bus and ethernet devices on this bus
would start using the physical-virtual library interfaces.
This patch impacts mempool/dpaa2, event/dpaa2, net/dpaa2,
raw/dpaa2_cmdif and raw/dpaa2_qdma as they are dependent
on the bus/fslmc and thus impact linkage of libraries.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
With this patch, dpaa bus and ethernet devices on this bus
would start using the physical-virtual library interfaces.
This patch impacts mempool/dpaa, event/dpaa and net/dpaa as
they are dependent on the bus/dpaa and thus impact linkage of
libraries.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This patch contains the Meson and GNU Make build system extensions
required for the Distributed Event Device, and also the initialization
code for the driver itself.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This will allow the same config file to be used from Meson.
The result has been verified to be identical via diffoscope.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This will make it possible to generate the file in the same way from
Meson as well.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add MVEP (Marvell Embedded Processors) to drivers/common which
will keep code reused by current and future MRVL PMDs.
Right now we have only common DMA memory initialization routines there.
Signed-off-by: Liron Himi <lironh@marvell.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Reviewed-by: Natalie Samsonov <nsamsono@marvell.com>
GCC version 4.8.5 does not pre-define __ARM_NEON. NEON is not
optional for ArmV8. Hence NEON related code can be enabled
when __aarch64__ is defined.
Bugzilla ID: 82
Cc: stable@dpdk.org
Reported-by: Raslan Darawsheh <rasland@mellanox.com>
Reported-by: Thomas F Herbert <therbert@redhat.com>
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Disable octeontx for gcc 4.8.5 as the compiler is emitting "internal
compiler error" for aarch64. The GCC "internal compiler error" was
observed only for arm64 architecture so disable the PMD only
for arm64.
Fixes: 4f760550a0 ("mk: disable OcteonTx for buggy compilers")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
When using make install, the permissions of the resulting file should be
those of the user using make install, not those of the user who ran the
build. This would not be the case when a user explicitly runs:
"make && sudo make install"
Fix this by changing "cp -a", which preserves all attributes, to
"cp -dR --preserve=timestamp", and by adding the flags
"--no-same-owner --no-same-permissions" to the calls to tar.
Fixes: 1fa0fd9d6b ("mk: allow to specify DESTDIR in build rule")
Fixes: 6b62a72a70 ("mk: install a standard cutomizable tree")
Fixes: 576de42b83 ("doc: render and install man pages")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
make rule test-basic is duplicate of test rule.
removed unused test-mempool and test-ring make rules.
Fixes: a3df7f8d9c ("mk: rename test related rules")
CC: stable@dpdk.org
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Makefiles are updated with new test case lists.
Test cases are classified as -
P1 - Main test cases,
P2 - Cryptodev/driver test cases,
P3 - Perf test cases which takes longer than 10s,
P4 - Logging/Dump test cases.
Makefile is updated with different targets
for the above classified groups.
Test cases for different targets are listed accordingly.
Cc: stable@dpdk.org
Signed-off-by: Jananee Parthasarathy <jananeex.m.parthasarathy@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
With mlx5, unlike normal flow rules implemented through Verbs for traffic
emitted and received by the application, those targeting different logical
ports of the device (VF representors for instance) are offloaded at the
switch level and must be configured through Netlink (TC interface).
This patch adds preliminary support to manage such flow rules through the
flow API (rte_flow).
Instead of rewriting tons of Netlink helpers and as previously suggested by
Stephen [1], this patch introduces a new dependency to libmnl [2]
(LGPL-2.1) when compiling mlx5.
[1] https://mails.dpdk.org/archives/dev/2018-March/092676.html
[2] https://netfilter.org/projects/libmnl/
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Octentx zipvf PMD provides hardware acceleration for
deflate and lzs compression and decompression operations
using Octeontx zip co-processor, which provide 8
virtualized zip devices.
This patch add basic initialization routine to register zip VFs
to compressdev library.
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Sunila Sahu <sunila.sahu@caviumnetworks.com>
Add initial PMD setup routines in compressdev
framework. ZLIB PMD appears as virtual compression
device. User would need to install zlib prior to
enabling this PMD.
Signed-off-by: Sunila Sahu <sunila.sahu@caviumnetworks.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
Add Makefiles, meson files, and empty source files for compression PMD.
Handle cases for building either symmetric crypto PMD
or compression PMD or both and the common files both depend on.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
The driver supports Hyper-V networking directly like
virtio for KVM or vmxnet3 for VMware.
This code is based off of the FreeBSD driver. The file and variable
names are kept the same to help with understanding (with most of the
BSD style warts removed).
This version supports the latest NetVSP 6.1 version and
older versions.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
This patch adds support for an additional bus type Virtual Machine BUS
(VMBUS) on Microsoft Hyper-V in Windows 10, Windows Server 2016
and Azure. Most of this code was extracted from FreeBSD and some of
this is from earlier code donated by Brocade.
Only Linux is supported at present, but the code is split
to allow future FreeBSD and Windows support.
The bus support relies on the uio_hv_generic driver from Linux
kernel 4.16. Multiple queue support requires additional sysfs
interfaces which is in kernel 5.0 (a.k.a 4.17).
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Random corruptions observed on platfoms with using
the dpdk library in shared mode with VPP software (plugin).
using traditional TLS scheme resolved the issue.
Tested with VPP with DPDK as a plugin.
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
The "-Wimplicit-fallthrough=2" option was introduced into gcc 7.0, it was
enabled when the cross compiler gcc is greater than 7.0, but for the host
side buildtools/pmdinfogen, if the native gcc is older than 7.0, or the
host cc compiler is clang, it should not be enabled.
The fix is to differentiate the host gcc Werror options from the cross gcc.
gcc -Wp,-MD,./.pmdinfogen.o.d.tmp -W -Wall -Wstrict-prototypes
-Wmissing-prototypes -Wmissing-declarations -Wold-style-definition
-Wpointer-arith -Wcast-align -Wnested-externs -Wcast-qual
-Wformat-nonliteral -Wformat-security -Wundef -Wwrite-strings -Wdeprecated
-Werror -Wimplicit-fallthrough=2 -Dbbb -Wno-format-truncation -g
-I/dpdk/build/include -o pmdinfogen.o -c
~/dpdk/buildtools/pmdinfogen/pmdinfogen.c gcc: error:
unrecognized command line option ‘-Wimplicit-fallthrough=2’
Fixes: ced3e6f8 ("mk: adjust gcc flags for new gcc 7 warnings")
Cc: stable@dpdk.org
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Tested-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This commit implements TCP segmentation offload in TAP.
librte_gso library is used to segment large TCP payloads (e.g. packets
of 64K bytes size) into smaller MTU size buffers.
By supporting TSO offload capability in software a TAP device can be used
as a failsafe sub device and be paired with another PCI device which
supports TSO capability in HW.
For more details on librte_gso implementation please refer to dpdk
documentation.
The number of newly generated TCP TSO segments is limited to 64.
Reviewed-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Make the compiler switch name and document name consistent as ``ifc`` to
avoid confusion. Also rename the map file to standard name for meson
build in the process.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Introduce rte_bpf_elf_load() function to provide ability to
load eBPF program from ELF object file.
It also adds dependency on libelf.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
librte_bpf provides a framework to load and execute eBPF bytecode
inside user-space dpdk based applications.
It supports basic set of features from eBPF spec
(https://www.kernel.org/doc/Documentation/networking/filter.txt).
Not currently supported features:
- JIT
- cBPF
- tail-pointer call
- eBPF MAP
- skb
- function calls for 32-bit apps
- mbuf pointer as input parameter for 32-bit apps
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Defined FPGA-BUS for Acceleration Drivers of AFUs
1. FPGA PCI Scan (1st Scan) follows DPDK UIO/VFIO PCI Scan Process,
probe Intel FPGA Rawdev Driver, it will be covered in following patches.
2. AFU Scan(2nd Scan) bind DPDK driver to FPGA Partial-Bitstream.
This scan is trigged by hotplug of IFPGA Rawdev probe, in this scan
the AFUs will be created and their drivers are also probed.
This patch will introduce rte_afu_device which describe the AFU device
listed in the FPGA-BUS.
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Adding basic skeleton of the ISA-L compression driver.
No compression functionality, but lays the foundation for
operations in the rest of the patchset.
The ISA-L compression driver utilizes Intel's ISA-L compression
library and compressdev API.
Signed-off-by: Lee Daly <lee.daly@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add basic functions to manage compress devices,
including driver and device allocation, and the basic
interface with compressdev PMDs.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
Picking a company stock ticker for a PMD name might not be a best approach
in a long run since name is too generic.
This patch addresses that and renames mrvl to mvsam.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Disable octeontx for gcc 4.8.5 as compiler is emitting "internal
compiler error" for aarch64.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Tested-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
DPAA2 QDMA driver uses MC DPDMAI object. This driver enables
the user (app) to perform data DMA without involving CPU in
the DMA process
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The IFCVF vDPA (vhost data path acceleration) driver provides support for
the Intel FPGA 100G VF (IFCVF). IFCVF's datapath is virtio ring compatible,
it works as a HW vhost backend which can send/receive packets to/from
virtio directly by DMA.
Different VF devices serve different virtio frontends which are in
different VMs, so each VF needs to have its own DMA address translation
service. During the driver probe a new container is created, with this
container vDPA driver can program DMA remapping table with the VM's memory
region information.
Key vDPA driver ops implemented:
- ifcvf_dev_config:
Enable VF data path with virtio information provided by vhost lib,
including IOMMU programming to enable VF DMA to VM's memory, VFIO
interrupt setup to route HW interrupt to virtio driver, create notify
relay thread to translate virtio driver's kick to a MMIO write onto HW,
HW queues configuration.
- ifcvf_dev_close:
Revoke all the setup in ifcvf_dev_config.
Live migration feature is supported by IFCVF and this driver enables
it. For the dirty page logging, VF helps to log for packet buffer write,
driver helps to make the used ring as dirty when device stops.
Because vDPA driver needs to set up MSI-X vector to interrupt the
guest, only vfio-pci is supported currently.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The manager provides a way to allocate physically and virtually
contiguous set of objects.
Signed-off-by: Artem V. Andreev <artem.andreev@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
On FreeBSD, make defconfig generates the config as
"defconfig_x86_64-bsdapp-", which does not resolve to any known
config file.
On FreeBSD, we get amd64 out of "uname -m", which was not handled by
the list of checks, but which now resolves to x86_64-native.
Then we run '$CC --version', and use grep -o with the list of known
compilers, and set to either gcc, icc or clang. Grep's '-o' option
returns the matched word rather than the whole line, making the
result easier to use.
The remaining code in the patch then takes ${compiler}, the "uname -m"
output and assembles them all together into a valid freebsd config name,
i.e. "defconfig_x86_64-native-bsdapp-clang".
Fixes: bce6c42c4a ("mk: add sensible default target with defconfig")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
Tested-by: Anatoly Burakov <anatoly.burakov@intel.com>
The virtio crypto device is a virtual cryptography device
as well as a kind of virtual hardware accelerator for
virtual machines. The linux kernel virtio-crypto driver
has been merged, and this patch introduces virtio crypto
PMD to achieve better performance.
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Reviewed-by: Fan Zhang <roy.fan.zhang@intel.com>
Adds support for the v0.49 of the IPsec Multi-buffer lib,
which now gets compiled and installed as a shared object.
Therefore, there is no need to pass the AESNI_MULTI_BUFFER_LIB_PATH
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Adds support for the v0.49 of the IPsec Multi-buffer lib,
which now gets compiled and installed as a shared object.
Therefore, there is no need to pass the AESNI_MULTI_BUFFER_LIB_PATH
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The introduction of the event timer adapter library adds a dependency
on the rte_timer library from the rte_eventdev library. Update the
order so that the timer library comes after the eventdev library in the
linker command when statically linking applications.
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Replace the BSD license header with the SPDX tag for files
with only an RehiveTech copyright on them.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Move commonly used functions across mempool, event and net devices to a
common folder in drivers.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The strncpy function is error prone for doing "safe" string copies, so
we generally try to use "snprintf" instead in the code. The function
"strlcpy" is a better alternative, since it better conveys the
intention of the programmer, and doesn't suffer from the non-null
terminating behaviour of it's n'ed brethern.
The downside of this function is that it is not available by default
on linux, though standard in the BSD's. It is available on most
distros by installing "libbsd" package.
This patch therefore provides the following in rte_string_fns.h to ensure
that strlcpy is available there:
* for BSD, include string.h as normal
* if RTE_USE_LIBBSD is set, include <bsd/string.h>
* if not set, fallback to snprintf for strlcpy
Using make build system, the RTE_USE_LIBBSD is a hard-coded value to "n",
but when using meson, it's automatically set based on what is available
on the platform.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
The name "mrvl" for Marvell PMD driver for PPv2 Marvell PPv2
(Packet Processor v2) 1/10 Gbps adapter is too generic and causes
problem for adding new PMD drivers for other Marvell devices.
Changed to "mvpp2" for specific Marvell PPv2 PMD.
This patch doesn't introduce any change except renaming.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
