Make rules renamed to a common syntax, test-x:
fast_test -> test-fast
ring_test -> test-ring
mempool_test -> test-mempool
perf_test -> test-perf
These are to run various sub-set of the unit tests.
Not touched to make rules that are already following the syntax:
test-basic
test-build
test
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Since "make test" and "make test-build" does dependency resolving, they
check for all dependent components (lib and drivers) which takes a few
seconds.
This is a good feature during development, but if the target is only
running unit test, that step is unnecessary, it is possible to compile
once and run unit test multiple times, without checking any code update.
For this purpose, a new make rule "make test-basic" added. Which only
runs the unit test, expects that unit test already compiled.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Don't build tests with default "make" command.
Require explicit command to build tests because not everybody interested
in running unit tests.
Following changes done in make rules:
"make test-build" <--- Added
"make test" <--- Updated functionality (build + run basic tests)
Now "make test" builds all tests and runs unit test (test).
Thanks to dependency resolving, it is possible to call "make test"
directly after config, "make test" will compile dependent components
(lib and drivers, but not apps).
And a new "make test-build" make rule added which will build
tests but not run unit test. "make test-build" has same dependency
resolving features with "make test"
To include "test" folder into makesystem, existing ROOTDIRS- variable
is used instead of hardcoding folder name into makefiles, current usage
of ROOTDIRS* variables are:
ROOTDIRS-y <-- root level folders prepared and compiled by default
ROOTDIRS- <-- root level folders prepared but not compiled by default
The preparation is required for dependency resolving and cleaning.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This is to logically group unit tests into their own folder,
separating them from "app" folder.
Hopefully this will make the unit test in DPDK more visible.
Following binaries moved to "test" folder:
cmdline-test
test-acl
test-pipeline
test <-- various DPDK unit tests
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Re-enable CONFIG_RTE_LIBRTE_SCHED, since it is needed to build
correctly.
Fix a few warnings when compiling mpipe_tilegx.c.
Remove an empty rte_cpu_feature_table[] array using a bogus type.
Properly set RTE_OBJCOPY_{TARGET,ARCH} in mk/arch/tile/rte.vars.mk.
Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>
Rather than allowing just armv7 to have non-fatal strict alignment
cast warnings, generalize it to both strict alignment architectures,
armv7 and tile.
Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>
Some PMDs provide device specific APIs. Bond and xenvirt are existing
samples for this.
And since these are PMD libraries, there are two options on how to link
them for shared library build:
1- They can be linked to all applications by default, using common
rte.app.mk file.
2- They can be explicitly linked to applications that use device
specific API.
Currently option one is in use, this patch switches to the option two.
Moves library linking to the Makefile of application Makefile that uses
device specific API.
This prevent these PMD libraries to be a dependency to applications
that don't use these device specific APIs.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
During app build with static library, some libraries wrapped with
--whole-archive compiler flag.
Wrapped libraries are mainly PMD libraries, this is required because PMD
APIs not called directly but run through callbacks registered via
constructor functions.
Also some set of libraries, depends to the PMD libraries needs this,
because of same reason.
All the libraries used by a plugin (any driver) must be in
--whole-archive to ensure that every symbols will be available for the
plugin.
But other libraries can be out of this flag, and this saves some bytes
in final binary.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
These files are linked to API documentation as usage samples, list of
files created automatically during doc creation.
Remove manually updated old one.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Adds Makefile for scheduler cryptodev PMD, and updates existing
Makefiles. Different than other cryptodev PMDs, scheduler PMD
is required to be built as shared libraries.
Adds scheduler PMD enable and debug flags to config/common_base.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
make config dependency resolving was always running serial,
parallelize it for better performance.
$ time make T=x86_64-native-linuxapp-gcc config
real 0m12.633s
$ time make -j8 T=x86_64-native-linuxapp-gcc config
real 0m1.826s
When config creation done under a single make target, using a for loop,
make has no control on the action, and it needs to run as implemented in
the rule. But if for loop converted into multiple targets, make can
detect independent targets and run them parallel based on -j parameter.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The environment variable CROSS must be set when using a cross-toolchain.
However it is counter intuitive to set a default value, considering
the toolchain required to build this architecture is well known.
It is especially weird when using a native toolchain and requiring to
unset this variable on the command line.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Reviewed-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch introduces crypto poll mode driver
using ARMv8 cryptographic extensions.
CPU compatibility with this driver is detected in
run-time and virtual crypto device will not be
created if CPU doesn't provide:
AES, SHA1, SHA2 and NEON.
This PMD is optimized to provide performance boost
for chained crypto operations processing,
such as encryption + HMAC generation,
decryption + HMAC validation. In particular,
cipher only or hash only operations are
not provided.
The driver currently supports AES-128-CBC
in combination with: SHA256 HMAC and SHA1 HMAC
and relies on the external armv8_crypto library:
https://github.com/caviumnetworks/armv8_crypto
Build ARMv8 crypto PMD if compiling for ARM64
and CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO option
is enable in the configuration file.
ARMV8_CRYPTO_LIB_PATH environment variable will
point to the appropriate library directory.
Signed-off-by: Zbigniew Bodek <zbigniew.bodek@caviumnetworks.com>
Reviewed-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Current Cryptodev AES-NI GCM PMD is implemented using Multi Buffer
Crypto library.This patch reimplement the device using ISA-L Crypto
library: https://github.com/01org/isa-l_crypto.
The migration entailed the following additional support for:
* GMAC algorithm.
* 256-bit cipher key.
* Session-less mode.
* Out-of place processing
* Scatter-gatter support for chained mbufs (only out-of place and
destination mbuf must be contiguous)
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Elastic Flow Distributor (EFD) is a distributor library that uses
perfect hashing to determine a target/value for a given incoming flow key.
It has the following advantages:
- First, because it uses perfect hashing, it does not store
the key itself and hence lookup performance is not dependent
on the key size.
- Second, the target/value can be any arbitrary value hence
the system designer and/or operator can better optimize service rates
and inter-cluster network traffic locating.
- Third, since the storage requirement is much smaller than a hash-based
flow table (i.e. better fit for CPU cache), EFD can scale to
millions of flow keys.
Finally, with current optimized library implementation performance
is fully scalable with number of CPU cores.
Signed-off-by: Byron Marohn <byron.marohn@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Saikrishna Edupuganti <saikrishna.edupuganti@intel.com>
Acked-by: Christian Maciocco <christian.maciocco@intel.com>
The PMD allows for DPDK and the host to communicate using a raw
device interface on the host and in the DPDK application. The device
created is a Tap device with a L2 packet header.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Aws Ismail <aismail@ciena.com>
Tested-by: Vasily Philipov <vasilyf@mellanox.com>
Enable the PMD by default on supported configurations.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Rename tools/ into usertools/ to differentiate from buildtools/
and devtools/ while making clear these scripts are part of
DPDK runtime.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
There is already a directory buildtools for pmdinfogen used by
the build system. The scripts used in makefiles are moved here.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
error #188: enumerated type mixed with another type
This is get when an integer assigned to an enum variable.
Since this usage is common and causing many ICC compilation errors, and
other compilers accept this usage. Disabling the warning.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
There was an option CONFIG_RTE_INSECURE_FUNCTION_WARNING (disabled by
default), which prevents from using some libc functions:
sprintf, snprintf, vsnprintf, strcpy, strncpy, strcat, strncat, sscanf,
strtok, strsep and strlen.
It's all about using them at the right place with the right precautions.
However, it is neither really possible nor a good advice to disable them.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The library was named libethdev without rte_ prefix.
It is now fixed, the library namespace is consistent.
Note: the ABI version has already been changed in this release cycle.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
When trying to install PDF, man pages or examples without having built
neither HTML API nor HTML guides, there was an error:
% make install-doc
tar: html: Cannot stat: No such file or directory
The fix is to check the html directory before installing HTML files.
Fixes: e4552b9cc6 ("mk: install doc")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This summarizes the "how to call dpdk-devbind" in one place to be
picked up by html/pdf/man-page docs.
That knowledge was available before but spread in various docs along
examples (which are great and have to be kept) as well as in the
--usage/--help option of the tool itself.
As a root only program in sbin it should belong to section 8
"8 System administration commands (usually only for root)"
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Luca Boccassi <lboccass@brocade.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This enables the rendering of rst into man pages as well as installing
them (if built) along the binaries. To do so there is a new make target
"doc-guides-man" which will render the rst files into man format.
Currently these three tools had docs that were compatible "enough" to
make up for a reasonable manpage.
- testpmd
- dpdk-pdump
- dpdk-procinfo
Since a man page should be installed along the binary they are not
installed in install-doc but install-runtime insteade. If not explicitly
built by the "doc-guides-man" target before calling install-runtime
there is no change to the old behaviour.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Luca Boccassi <lboccass@brocade.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch replaces name "libcrypto" to "openssl" from file directories,
symbol prefixes and sub-names connected with old name.
Renamed poll mode driver files, test files, and documentations.
It is done to better name association with library because
the cryptography operations are using Openssl library crypto API.
Fixes: d61f70b4c9 ("crypto/libcrypto: add driver for OpenSSL library")
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
The QEDE PMD now uses unzipped firmware file eliminating the dependency
on zlib. Hence remove LDLIBS entry form the Makefile and enable qede
PMD by default.
Fixes: 6adac0bf30 ("qede: add missing external dependency and disable by default")
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
All macros related to driver registeration renamed from DRIVER_*
to RTE_PMD_*
This includes:
DRIVER_REGISTER_PCI -> RTE_PMD_REGISTER_PCI
DRIVER_REGISTER_PCI_TABLE -> RTE_PMD_REGISTER_PCI_TABLE
DRIVER_REGISTER_VDEV -> RTE_PMD_REGISTER_VDEV
DRIVER_REGISTER_PARAM_STRING -> RTE_PMD_REGISTER_PARAM_STRING
DRIVER_EXPORT_* -> RTE_PMD_EXPORT_*
Fix PMDINFOGEN tool to look for matches of RTE_PMD_REGISTER_*.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The GCC 4.9 -march option supports the intel code names for processors,
for example -march=silvermont, -march=broadwell.
The RTE_MACHINE config flag can be used to pass code name to
the compiler as -march flag.
Release notes is updated.
Linux and FreeBSD getting started guides are updated with recommended
gcc version as 4.9 and above.
Some of the gmake command examples in sample application guide and driver
guides are updated with gcc version as 4.9.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Previously, librte_net only contained header files. Add a C file
(empty for now) and generate a library. It will contain network helpers
like checksum calculation, software packet type parser, ...
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
This code provides the initial implementation of the libcrypto
poll mode driver. All cryptography operations are using Openssl
library crypto API. Each algorithm uses EVP_ interface from
openssl API - which is recommended by Openssl maintainers.
This patch adds libcrypto poll mode driver support to librte_cryptodev
library.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Added new SW PMD which makes use of the libsso SW library,
which provides wireless algorithms ZUC EEA3 and EIA3
in software.
This PMD supports cipher-only, hash-only and chained operations
("cipher then hash" and "hash then cipher") of the following
algorithms:
- RTE_CRYPTO_SYM_CIPHER_ZUC_EEA3
- RTE_CRYPTO_SYM_AUTH_ZUC_EIA3
The ZUC hash and cipher algorithms, which are enabled
by this crypto PMD are implemented by Intel's libsso software
library.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
remove vhost-cuse code, including the eventfd_link kernel module that
is for vhost-cuse only.
The lib/virt/qemu-wrap.py is also removed, as it's mainly for vhost-cuse
usage.
As we have one vhost implementation now, one vhost config option is
needed only. Thus, CONFIG_RTE_LIBRTE_VHOST_USER is removed.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Simplify crypto and ethdev pci drivers init by using newly introduced
init macros and helpers.
Those drivers then don't need to register as "rte_driver"s anymore.
Exceptions:
- virtio and mlx* use RTE_INIT directly as they have custom initialization
steps.
- VDEV devices are not modified - they continue to use PMD_REGISTER_DRIVER.
Update documentation for replacing an example referring to
PMD_REGISTER_DRIVER.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
RTE_DEVEL_BUILD is set to := y in mk/rte.vars.mk, which makes it
impossible to override via an environment variable, and forces users
to pass it inline in the make call.
Use ?= instead to have it pick up the environment variable as well.
Signed-off-by: Luca Boccassi <lboccass@brocade.com>
Acked-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Some targets in mk/internal/rte.compile-pre.mk are calling CC or
HOSTCC without passing CPPFLAGS, EXTRA_CPPFLAGS or HOST_CPPFLAGS,
HOST_EXTRA_CPPFLAGS.
On Debian/Ubuntu builds this means that preprocessor flags set by the
dpkg-buildpackage environment, like hardening flags, are not
correctly passed to all objects builds.
Signed-off-by: Luca Boccassi <lboccass@brocade.com>
Acked-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Verbosity is considered enabled when $V is not empty.
It is a well spread shortcut in makefiles, see git grep '$(if $(*V'
So V=0 and V=1 are equivalent.
It is fixed by unsetting V when it is 0.
A side effect is to fix kernel module compilation verbosity
which is set to 0 when V is empty.
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
FreeBSD make install fails because of unsupported tar option:
tar: Option --warning=no-ignore-newer is not supported
Issue fixed by removing unsupported tar option.
Fixes: 6b62a72a70 ("mk: install a standard cutomizable tree")
Fixes: e4552b9cc6 ("mk: install doc")
Reported-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Following discussions on the mailing list [1] and since nobody stood up to
implement the necessary cleanups, here is the ivshmem integration removal.
There is not much to say about this patch, a lot of code is being removed.
The default configuration file for packet_ordering example is replaced with
the "native" x86 file.
The only tricky part is in eal_memory with the memseg index stuff.
More cleanups can be done after this but will come in subsequent patchsets.
[1]: http://dpdk.org/ml/archives/dev/2016-June/040844.html
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
-dumpversion is for gcc compatibility and doesn't return actual clang
version. -dumpversion only returns 4.2.1 for a long time.
Fixes: 2ef6eea891 ("mk: add clang toolchain")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
The following tools may be installed system-wide.
It may be cleaner and more convenient to find them with the same
dpdk- prefix (especially for autocompletion).
Moreover, the script dpdk_nic_bind.py deserves a new name because it is
not restricted to NICs and can be used for e.g. crypto.
These files are renamed:
pmdinfogen -> dpdk-pmdinfogen
pmdinfo.py -> dpdk-pmdinfo.py
dpdk_pdump -> dpdk-pdump
dpdk_proc_info -> dpdk-procinfo
dpdk_nic_bind.py -> dpdk-devbind.py
setup.sh -> dpdk-setup.sh
The tools pmdinfogen, pmdinfo.py and dpdk_pdump are new in 16.07.
The scripts dpdk_nic_bind.py and setup.sh may have been used with
previous releases by end users. That's why a symbolic link still
provide the old name in the installed tools directory.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The sed syntax of '0,/regexp/' is GNU specific and fails with
non GNU sed in FreeBSD.
To solve the issue we can use awk instead to remove duplicates.
The awk script basically keeps the last config value, while
maintaining order and comments from original config file.
Fixes: b2063f104d ("mk: filter duplicate configuration entries")
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
There is an error when linking static EAL library with an application:
eal_alarm.c:(.text+0xd7): undefined reference to `clock_gettime'
eal_alarm.c:(.text+0x20f): undefined reference to `clock_gettime'
eal_timer.c:(.text+0x108): undefined reference to `clock_gettime'
eal_timer.c:(.text+0x146): undefined reference to `clock_gettime'
The function clock_gettime() is in librt for old glibc.
Fixes: 281948b475 ("mk: fix missing librt dependencies")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Yongjie Gu <yongjiex.gu@intel.com>
The -l options specifying libraries to link with are in LDLIBS.
But it can happen to have some libraries in other variables.
In case of a low level dependency specified in some environments
via EXTRA_LDFLAGS, there can be an unresolved issue due to a
wrong linking order. Indeed the libraries must be specified from
the higher level (dependency consumers) to the lower level (dependencies).
It is fixed by moving LDLIBS before LDFLAGS variables in the link
command line.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Raslan Darawsheh <rasland@mellanox.com>
Make some cleaning before fixing the link dependency ordering
in the next commit.
- Move flags for creating a map file in the variable MAPFLAGS.
- Make only one call to linkerprefix macro.
- Group linker flags on the same line.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Due to the hierarchy and the demand to keep the base config showing all
options, some config keys end up multiple times in the .config file.
Due to the way the actual config is sourced only the last entry is
important. That can confuse people changing values in .config which
are then ignored.
A suggested solution was to filter for duplicates at the end of the
actual config step which is implemented here.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
When building with "make V=1" it is expected to see the output of each
compiler command in order to debug them.
Unfortunately the pmdinfogen related commands were always quiet.
It is fixed by defining the commands in some Makefile variables.
They are printed if the verbose mode is enabled.
The other benefit of this rework is to stop compilation after a
failure with pmdinfogen.
The command readlink is removed in this rework because it seems useless.
Fixes: 3d781ca328 ("mk: do post processing on objects that register a driver")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The tool pmdinfogen was called from RTE_OUTPUT/app/ which does not exist
if building a driver outside of the SDK build.
When building DPDK, RTE_SDK_BIN is RTE_OUTPUT. When building an external
driver, RTE_SDK_BIN must point to the installed DPDK directory containing
includes, libs, etc.
That's why pmdinfogen must be installed in the SDK directory and be part
of the SDK installation.
Fixes: 3d781ca328 ("mk: do post processing on objects that register a driver")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The recipe rte.hostapp.mk does not build in hostapp/ anymore.
Fixes: 98b0fdb0ff ("pmdinfogen: add buildtools and pmdinfogen utility")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
When compiling the drivers, some code is generated with pmdinfogen.
A fresh parallel build can fail if a driver is compiled before pmdinfogen:
build/buildtools/dpdk-pmdinfogen: Permission denied
There was a dependency declared in drivers/Makefile but it cannot work
because this file is based on mk/rte.subdir.mk which do not handle
dependencies.
It is fixed by declaring the whole buildtools as (order only) prerequisite
of drivers.
Fixes: cb6696d220 ("drivers: update registration macro usage")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This tool searches for the primer sting PMD_DRIVER_INFO= in any ELF binary,
and, if found parses the remainder of the string as a json encoded string,
outputting the results in either a human readable or raw, script parseable
format
Note that, in the case of dynamically linked applications, pmdinfo.py will
scan for implicitly linked PMDs by searching the specified binaries
.dynamic section for DT_NEEDED entries that contain the substring
librte_pmd. The DT_RUNPATH, LD_LIBRARY_PATH, /usr/lib and /lib are
searched for these libraries, in that order
If a file is specified with no path, it is assumed to be a PMD DSO, and the
LD_LIBRARY_PATH, /usr/lib[64]/ and /lib[64] is searched for it
Currently the tool can output data in 3 formats:
a) raw, suitable for scripting, where the raw JSON strings are dumped out
b) table format (default) where hex pci ids are dumped in a table format
c) pretty, where a user supplied pci.ids file is used to print out vendor
and device strings
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Modify the compilation makefile to identify C files that export PMD
information, and use that to trigger execution of the pmdinfo binary. If
the execution of pmdinfo is successful, compile the output C file to an
object, and use the linker to do relocatable linking on the resultant
object file into the parent object that it came from. This effectively
just adds the json string into the string table of the object that defines
the PMD to the outside world.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Remy Horton <remy.horton@intel.com>
pmdinfogen is a tool used to parse object files and build json strings for
use in later determining hardware support in a dso or application binary.
pmdinfo looks for the non-exported symbol names this_pmd_name<n> and
this_pmd_tbl<n> (where n is a integer counter). It records the name of
each of these tuples, using the later to find the symbolic name of the
pci_table for physical devices that the object supports. With this
information, it outputs a C file with a single line of the form:
static char *<pmd_name>_driver_info[] __attribute__((used)) = " \
PMD_DRIVER_INFO=<json string>";
Where <pmd_name> is the arbitrary name of the pmd, and <json_string> is the
json encoded string that hold relevant pmd information, including the pmd
name, type and optional array of pci device/vendor ids that the driver
supports.
This c file is suitable for compiling to object code, then relocatably
linking into the parent file from which the C was generated. This creates
an entry in the string table of the object that can inform a later tool
about hardware support.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Since below commit, ACL library is outside the scope of --whole-archive
and ACL autotest fails.
RTE>>acl_autotest
ACL: allocation of 25166728 bytes on socket 9 for ACL_acl_ctx failed
ACL: rte_acl_add_rules(acl_ctx): rule #1 is invalid
Line 1584: SSE classify with zero categories failed!
Test Failed
This is the result of the linker picking weak over non-weak functions.
Fixes: 95dc3c3cf3 ("mk: reduce scope of whole-archive static linking")
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Since [1] duplicates in LDLIBS are removed. The side effect is that it
does not distinguish between libraries or linker flags.
This patch allows multiple linker flags in LDLIBS, such as
--whole-archive.
[1] Commit: edf4d331dc ("mk: eliminate duplicates from libraries list")
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Introduce driver initialization and enable build infrastructure for
nicvf pmd driver.
By default, It is enabled only for defconfig_arm64-thunderx-*
config as it is an inbuilt NIC device.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Signed-off-by: Kamil Rytarowski <kamil.rytarowski@caviumnetworks.com>
Signed-off-by: Zyta Szpak <zyta.szpak@semihalf.com>
Signed-off-by: Slawomir Rosek <slawomir.rosek@semihalf.com>
Signed-off-by: Radoslaw Biernacki <rad@semihalf.com>
This patch adds the initial skeleton for bnxt driver along with the
nic guide, and ties the driver into the build system.
At this point, the driver simply fails init.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Reviewed-by: David Christensen <david.christensen@broadcom.com>
[Release Note Addition]
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Require all symbols used by a DSO to be resolvable via LDLIBS at
build-time. Previously it was possible to build a library with
incomplete dependencies which could then fail at run-time.
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
When building an external library with rte.extlib.mk, the internal
libraries were not found because the linker search path was the
external library install directory (RTE_OUTPUT/lib).
It is fixed by searching in the internal library install directory
(RTE_SDK_BIN/lib).
When building an internal library, RTE_SDK_BIN = RTE_OUTPUT.
Fixes: c6417ce61f ("mk: add build-time library directory to linker path")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The underlying libsso library that SNOW3G PMD uses has been updated,
so now it is called libsso_snow3g. Also, the path to the library
has been renamed to reflect this changes (now called LIBSSO_SNOW3G_PATH).
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Added new SW PMD which makes use of the libsso_kasumi SW library,
which provides wireless algorithms KASUMI F8 and F9
in software.
This PMD supports cipher-only, hash-only and chained operations
("cipher then hash" and "hash then cipher") of the following
algorithms:
- RTE_CRYPTO_SYM_CIPHER_KASUMI_F8
- RTE_CRYPTO_SYM_AUTH_KASUMI_F9
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
The librte_pdump library provides a framework for
packet capturing in dpdk. The library provides set of
APIs to initialize the packet capture framework, to
enable or disable the packet capture, and to uninitialize
it.
The librte_pdump library works on a client/server model.
The server is responsible for enabling or disabling the
packet capture and the clients are responsible
for requesting the enabling or disabling of the packet
capture.
Enabling APIs are supported with port, queue, ring and
mempool parameters. Applications should pass on this information
to get the packets from the dpdk ports.
For enabling requests from applications, library creates the client
request containing the mempool, ring, port and queue information and
sends the request to the server. After receiving the request, server
registers the Rx and Tx callbacks for all the port and queues.
After the callbacks registration, registered callbacks will get the
Rx and Tx packets. Packets then will be copied to the new mbufs that
are allocated from the user passed mempool. These new mbufs then will
be enqueued to the application passed ring. Applications need to dequeue
the mbufs from the rings and direct them to the devices like
pcap vdev for viewing the packets outside of the dpdk
using the packet capture tools.
For disabling requests, library creates the client request containing
the port and queue information and sends the request to the server.
After receiving the request, server removes the Rx and Tx callback
for all the port and queues.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch defines the target and arch value of objcopy program for
IBM POWER PPC64 little endian architecture.
Fixes: 99d6231fdc ("mk: define objcopy-specific target and arch")
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
The program objcopy uses non-standard conventions to name the
target and arch. Define the values for supported architectures
(tile and ppc_64 are missing).
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
The --whole-archive argument is only required for plugins (drivers)
and libraries used by these plugins.
Currently it covers all libraries.
Reducing the scope of this argument slightly reduce final application size
when statically linked.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
As stated in the comment:
Order is important: from higher level to lower level
This is an attempt to make the layering order better respected.
It will help to restrict the --whole-archive scope for plugins.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Replace --no-as-needed linker flag with --as-needed flag, which will
only link libraries directly called by application.
It can be achieved now that the libraries dependencies are handled
properly.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
>From "man ld":
Using this option has a significant performance cost.
It is best to use it only when there are unavoidable
circular references between two or more archives.
Remove the option since it does not seem necessary.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
On a linker command line, the dependencies must be declared after
the libraries using them.
It will avoid some issues when building an application with static
libraries and --as-needed option.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
--exclude became a positional option in tar 1.29, breaking the
test app filtering in "make install", causing .map files and all test
apps to get installed in bindir. Adjust the tar arguments accordingly,
this is compatible with older versions too since they do not care about
the order.
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1337864
Fixes: 6b62a72a70 ("mk: install a standard cutomizable tree")
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Up to now dependencies between DPDK internal libraries have been
untracked at shared library level, requiring applications to know
about library internal dependencies and often consequently overlinking.
Since the dependencies are already recorded for build ordering in the
makefiles with DEPDIRS-y we can use that information to generate LDLIBS
entries for internal libraries automatically.
Also revert commit 8180554d82 ("vhost: fix linkage of driver with
library") which is made redundant by this change.
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
The perf test lists were not consistent.
Add timer perf test to the list.
Add LPM6 test to fast tests.
And fix the phony target.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
We can define any custom whitelist of tests to run:
make test WHITELIST=ring
The predefined lists for ring and mempool tests are not quite useful.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add default library output folder to the library search folder.
This is useful for development environment, in production environment
DPDK libraries already should be in know locations.
Patch removes requirement to set LD_LIBRARY_PATH variable when DPDK
compiled as shared library.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch introduces dpaa2 machine target to address difference
in cpu parameter, number of core to 8 and no numa support
w.r.t default armv8-a machine
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This is a pre-requisite for adding DT_NEEDED dependencies
between internal libraries.
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Tested-by: Tetsuya Mukawa <mukawa@igel.co.jp>
The dpdk build system passes -mfloat-abi=softfp, which makes the build fail
when the selected ABI is EABIhf. The dpdk build system should not make
assumptions on the selected ARM ABI.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
In order to ease packaging support of changes in DPDK build system,
introduce a decimal integer to compare version numbers.
It does not show the minor numbers as it is not meaningful for packaging.
Usage for DPDK 16.04:
% make showversionum
1604
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch clean-up the code in librte_port.
The clean-up includes the following:
* Clearer error message display.
* Remove unnecessary RTE_NEXT_ABI macro warping.
* Remove __rte_unused attribute
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The patch introduces a new PMD. This PMD is implemented as thin wrapper
of librte_vhost. It means librte_vhost is also needed to compile the PMD.
The vhost messages will be handled only when a port is started. So start
a port first, then invoke QEMU.
The PMD has 2 parameters.
- iface: The parameter is used to specify a path to connect to a
virtio-net device.
- queues: The parameter is used to specify the number of the queues
virtio-net device has.
(Default: 1)
Here is an example.
$ ./testpmd -c f -n 4 --vdev 'eth_vhost0,iface=/tmp/sock0,queues=1' -- -i
To connect above testpmd, here is qemu command example.
$ qemu-system-x86_64 \
<snip>
-chardev socket,id=chr0,path=/tmp/sock0 \
-netdev vhost-user,id=net0,chardev=chr0,vhostforce,queues=1 \
-device virtio-net-pci,netdev=net0,mq=on
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Rich Lane <rich.lane@bigswitch.com>
Tested-by: Rich Lane <rich.lane@bigswitch.com>
Update for queue state event name:
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This is a PMD for the Amazon ethernet ENA (Elastic Network Adapters)
family.
The driver operates variety of ENA adapters through feature negotiation
with the adapter and upgradable commands set.
ENA driver handles PCI Physical and Virtual ENA functions.
Signed-off-by: Evgeny Schemeilin <evgenys@amazon.com>
Signed-off-by: Jan Medala <jan@semihalf.com>
Signed-off-by: Jakub Palider <jpa@semihalf.com>
Release Note addition:
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
ARMv7 machines have usually the NEON available.
Customization of the -mfpu=neon must be done by hand or by defining
another machine rte.vars.mk.
So, the CONFIG_RTE_ARCH_ARM_NEON is useless (and confusing).
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
In openSUSE Tumbleweed (and in any other SUSE distribution which
uses (or will use) gcc >= 5), gcc -dumpversion returns '5'. This is on
purpose as discussed in https://bugzilla.opensuse.org/show_bug.cgi?id=941428
As a result of which, the gcc-4.x comparison (40 against 5) does not
work leading to tons of warnings and failures during build.
This patch aims to change the way the gcc version is obtained by using
the gcc macros directly.
This is similar to what's being used in the Linux kernel. Querying the
GCC macros directly gives more accurate results compared to -dumpversion
which could vary across distributions.
Signed-off-by: Markos Chandras <mchandras@suse.de>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Commit e86a699cf6 missed two further libm dependencies: ceil() used
by librte_meter is typically inlined so the missing dependency does not
actually cause failures, and librte_pmd_nfp is not built by default
so its easy to miss.
This causes duplicates in LDLIBS in many configurations so its vital
they are removed before passing to linker.
Fixes: e86a699cf6 ("mk: fix shared library dependencies on libm and librt")
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Duplicates in LDLIBS can cause link failures from multiply defined
symbols, ensure all libraries are only mentioned once. Can't use
sorting for duplicate elimination as order is critical so awk one-liner
is used.
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
When compiling each file, the CPU flags are given as RTE_MACHINE_CPUFLAG_*
and in the list RTE_COMPILE_TIME_CPUFLAGS.
RTE_MACHINE_CPUFLAG_* are used to check the CPU features when compiling.
The list RTE_COMPILE_TIME_CPUFLAGS is used only to check the CPU at
runtime in the function rte_cpu_check_supported(). So it is not needed to
define this list for every files.
That's why RTE_COMPILE_TIME_CPUFLAGS is removed from the common variable
MACHINE_CFLAGS and is added only to the CFLAGS of eal_common_cpuflags.c.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The linker script is generated by simply finding all libraries in
RTE_OUTPUT/lib.
The issue shows up when re-building the DPDK, hence already having a
linker script in that directory, resulting in the linker script
including itself.
That does not play well with the linker.
Simply filtering the linker script from all the found libraries solves
the problem.
Fixes: 948fd64bef ("mk: replace the combined library with a linker script")
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
The CROSS variable has empty default value (for native) and
must be set when using a cross-toolchain.
Signed-off-by: Liming Sun <lsun@ezchip.com>
Acked-by: Zhigang Lu <zlu@ezchip.com>
Add DT_NEEDED entries for external library dependencies which
are the most critical ones for sane operation.
Clean up vhost_cuse CFLAGS/LDFLAGS confusion while at it.
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
There are two places that need -lm (test app and librte_sched) and
exactly one that needs -lrt (librte_sched). Add the relevant
DT_NEEDED entries to both, and eliminate the bogus discrepancy
between Linux and BSD EXECENV_LDLIBS wrt these libs.
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Originally, source ports in librte_port is an input port used as packet
generator. Similar to Linux kernel /dev/zero character device, it
generates null packets. This patch adds optional PCAP file support to
source port: instead of sending NULL packets, the source port generates
packets copied from a PCAP file. To increase the performance, the packets
in the file are loaded to memory initially, and copied to mbufs in circular
manner. Users can enable or disable this feature by setting
CONFIG_RTE_PORT_PCAP compiler option "y" or "n".
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
If the experimental CONFIG_RTE_LIBRTE_CRYPTODEV is disabled, build of
any crypto pmds will fail because of the missing dependency. The commit
94288d645 fixes the issue when compiled with shared libraries but there
is still an issue at link time with static libs:
LD test
/usr/bin/ld: cannot find -lrte_pmd_null_crypto
collect2: error: ld returned 1 exit status
Only add the -l linker flags related to crypto PMDs if CRYPTODEV is
enabled.
Fixes: 94288d645 ("mk: fix build without crypto")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
This patch provides the implementation of a NULL crypto PMD, which supports
NULL cipher and NULL authentication operations, which can be chained together
as follows:
- Authentication Only
- Cipher Only
- Authentication then Cipher
- Cipher then Authentication
As this is a NULL operation device the crypto operations which are submitted for
processing are not actually modified and are stored in a queue pairs processed
packets ring ready for collection when rte_cryptodev_burst_dequeue() is called.
The patch also contains the related unit tests function to test the PMDs
supported operations.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This patch provides the implementation of an AES-NI accelerated crypto PMD
which is dependent on Intel's multi-buffer library, see the white paper
"Fast Multi-buffer IPsec Implementations on Intel® Architecture Processors"
This PMD supports AES_GCM authenticated encryption and authenticated
decryption using 128-bit AES keys
The patch also contains the related unit tests functions
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John Griffin <john.griffin@intel.com>
Added new SW PMD which makes use of the libsso SW library,
which provides wireless algorithms SNOW 3G UEA2 and UIA2
in software.
This PMD supports cipher-only, hash-only and chained operations
("cipher then hash" and "hash then cipher") of the following
algorithms:
- RTE_CRYPTO_SYM_CIPHER_SNOW3G_UEA2
- RTE_CRYPTO_SYM_AUTH_SNOW3G_UIA2
The SNOW 3G hash and cipher algorithms, which are enabled
by this crypto PMD are implemented by Intel's libsso software
library. For library download and build instructions,
see the documentation included (doc/guides/cryptodevs/snow3g.rst)
The patch also contains the related unit tests function to test the PMD
supported operations.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
As cryptodev library does not depend on mbuf_offload library
any longer, this patch removes it.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
When specifying a wrong directory with RTE_SDK and RTE_TARGET
to build an application, the error message about missing config
file was wrong.
Fixes: 6b62a72a70 ("mk: install a standard cutomizable tree")
Reported-by: Steeven Lee <steeven@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add RTE_DEVEL_BUILD make-variable which can be used to do things
differently when doing development vs building a release,
autodetected from source root .git presence and overridable via
commandline. It is used it to enable -Werror compiler flag and may
be extended to other checks.
Failing build on warnings is a useful developer tool but its bad
for release tarballs which can and do get built with newer
compilers than what was used/available during development. Compilers
routinely add new warnings so code which built silently with cc X
might no longer do so with X+1. This doesn't make the existing code
any more buggier and failing the build in this case does not help
to improve the quality of an already released version either.
This change the default flags which can be tuned with EXTRA_CFLAGS.
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The physically linked-together combined library has been an increasing
source of problems, as was predicted when library and symbol versioning
was introduced. Replace the complex and fragile construction with a
simple linker script which achieves the same without all the problems,
remove the related kludges from eg mlx drivers.
Since creating the linker script is practically zero cost, remove the
config option and just create it always.
Based on a patch by Sergio Gonzales Monroy, linker script approach
initially suggested by Neil Horman.
Suggested-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Suggested-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The CONFIG_RTE_MACHINE must not contain hyphens to work correctly. This was
initially done only for the file name defconfig_arm-armv7a-linuxapp-gcc. This
patch fixes install-sdk goal. Otherwise, it creates a wrong directory for this
platform.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
by default, all the targets will be configured with the 64-byte cache line
size, targets which have different cache line size can be overridden
through target specific config file.
Selected ThunderX and power8 as CONFIG_RTE_CACHE_LINE_SIZE=128 targets
based on existing configuration.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
More and more machines and architectures are added without keeping
the lists up-to-date.
Replace the lists with a pointer to the reference directory.
The same kind of pointer is used for the supported compilers and environments.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
As discussed on list, switch numbering scheme to be based on year/month.
Release 2.3 then becomes 16.04.
Ref: http://dpdk.org/ml/archives/dev/2015-December/030336.html
Also, added zero padding to the month so that it appear as 16.04 and
not 16.4 in "make showversion" and rte_version().
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Depending on non-doc targets being built before and the setting of DESTDIR
the copy of the examples dir being part of install-doc could in some cases
fail with a non existent "$(DESTDIR)$(datadir)" target directory.
Add the conditional rte_mkdir for that to avoid the issue.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Some shells like dash do not support the syntax {}:
{mk,scripts}: No such file or directory
Reported-by: Thiago Martins <thiagocmartinsc@gmail.com>
Reported-by: Piotr Bartosiewicz <piotr.bartosiewicz@atendesoftware.pl>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The object files are copied to prepare the internal combined library.
It must be disabled when building an external library.
It has been seen because the directory was missing:
examples/ethtool/lib/x86_64-native-linuxapp-gcc/build/lib:
No such file or directory
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Starting with commit 9aa2053c6e
EXTRA_CFLAGS is sometimes being passed to the compiler without
WERROR_FLAGS which can cause spurious warnings by the dozen,
for example with when compiling with EXTRA_CFLAGS="-Wformat-security":
cc1: warning: -Wformat-security ignored without -Wformat [-Wformat-security]
Passing WERROR_FLAGS to AUTO_CPU helper makes the warning flag usage
consistent throughout the codebase, silencing the warnings.
Fixes: 9aa2053c6e ("mk: influence CPU flags with user input")
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Similar to commit 5f9115e58c, but
for qat and mpipe drivers. The former did not exist when the
previous patch was sent and latter I just missed.
Fixes: 5f9115e58c ("mk: fix shared library dependencies of drivers")
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Similar to commit 113c8e13c4, but
for bnx2x, pcap, sze2data and xenvirt PMDs.
Requiring applications to know about library internal details like
dependencies to external helper libraries is a limitation of
static linkage, shared libraries should always know their own
dependencies for sane operation. This is especially highlighted
with dlopen()'ed items, having applications link against about plugin
internal dependencies goes on the side of absurd.
Note that linking with a shared combined library still requires to
know the internal dependencies.
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Some DPDK libraries have a dependency.
The Mellanox drivers embed this declaration in shared library case.
So the application do not need to know the dependency when linking.
But it cannot work with static libraries or the combined one.
Note that Mellanox drivers are currently not supported in a shared
combined library case.
Most of the DPDK libraries declare their dependencies to be linked
with the application in every cases, even when using drivers as
shared library plugins.
This patch improves the condition used for Mellanox drivers, so that
it can be applied to other drivers without breaking the shared
combined library case.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
In order to be installed system-wise, this application needs
a prefix. So it makes clear that it is DPDK related.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
The examples are part of the installed documentation.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
The HTML API and HTML/PDF guides may be installed if generated.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
sbin/dpdk_nic_bind is a symbolic link to tools/dpdk_nic_bind.py
where some python objects may be generated.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Add kernel modules to "make install".
Nothing is done if there is no kernel module compiled.
When using "make install T=", the default path is the same as before.
The Linux path is based on host kernel version.
Suggested-by: Mario Carrillo <mario.alfredo.c.arevalo@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Provides new sub-rules to install runtime and sdk separately.
The build directory must be changed from BUILD_DIR to O in install
rules to avoid a bad recursive effect (O being BUILD_DIR being O + T).
Suggested-by: Mario Carrillo <mario.alfredo.c.arevalo@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
The old install command was:
make install T=x86_64-native-linuxapp-gcc DESTDIR=install
It still works and can be replaced by these more standard commands:
make config T=x86_64-native-linuxapp-gcc 0=x86_64-native-linuxapp-gcc
make O=x86_64-native-linuxapp-gcc
make install O=x86_64-native-linuxapp-gcc prefix= DESTDIR=install
It means the "make install" do not perform any compilation anymore when T
is not used. It is done only in pre_install to keep compatibility with the
old syntax based on T= option.
The default prefix /usr/local is empty in the T= case which is
used only for a local install.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
The rule "install" follows these conventions:
http://gnu.org/prep/standards/html_node/Directory-Variables.htmlhttp://gnu.org/prep/standards/html_node/DESTDIR.html
The variable sdkdir has been added to the more standards ones,
to configure the directory used with RTE_SDK when using the DPDK makefiles
to build an application.
It is still possible to build DPDK with the "install T=" rule without
specifying any DESTDIR. In such case there is no install, as before.
The old usage of an installed SDK is:
make -C examples/helloworld RTE_SDK=$(readlink -m $DESTDIR) \
RTE_TARGET=x86_64-native-linuxapp-gcc
RTE_TARGET can be specified but is useless now with an installed SDK.
The RTE_SDK directory must now point to a different path depending of
the installation.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
The real installation was called "binary install" and was done
after the build when DESTDIR was specified.
Remove this limitation and move the code in install rule only.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
The multi-target install create some subdirectories with the target name
which is not standard for a "make install" procedure.
The uninstall procedure cannot be applied properly (without removing
all files in a directory). It would need to pre-compute paths.
As it is a packaging issue, it is removed from the build system capabilities.
The variable BUILD_DIR is also renamed to RTE_OUTPUT used in other files.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
It is not possible to test every configs on an unique machine.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Fixes following error (observed when versioning macros used):
LD libdpdk.so
/usr/bin/ld: /root/dpdk/build/lib/libdpdk.so: version node not found
for symbol <function>@DPDK_x.y
Also resulting combined library contains symbol version information:
$ readelf -a build/lib/libdpdk.so | grep rte_eal_ | grep @ | head
<...> GLOBAL DEFAULT 12 rte_eal_alarm_set@@DPDK_2.0
<...> GLOBAL DEFAULT 12 rte_eal_pci_write_config@@DPDK_2.1
<...> GLOBAL DEFAULT 12 rte_eal_remote_launch@@DPDK_2.0
...
Versioning fixed by merging all version scripts into one automatically and
feeding it to final library.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Building RTE_LIBRTE_PMD_XENVIRT was broken when RTE_BUILD_COMBINE_LIBS was
enabled (http://dpdk.org/ml/archives/dev/2015-November/028660.html).
Now the underlying issue is rather simple, the xen code needs libxenstore.
But rte.app.mk so far only considered that when RTE_BUILD_COMBINE_LIBS was
disabled.
While it is correct to create the DPDK sublib linking only in the
RTE_BUILD_COMBINE_LIBS=n case, the libxenstore should be added to the linked
libs in any case if RTE_LIBRTE_PMD_XENVIRT is enabled.
Reported-by: Thiago Martins <thiagocmartinsc@gmail.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
We have encountered a CPU where the AES-NI instruction set is disabled
due to export restrictions. Since the build machine and target machine
is different, using -native configs doesn't work, and on this CPU, the
application refuses to run due to the AES CPU flags being amiss.
The patch passes EXTRA_CFLAGS to the figure-out-cpu-flags helper,
which allows us to add -mno-aes to the compile flags and resolve this
problem.
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The initial problem has been seen while building mlx4 pmd as a shared
library on Ubuntu 14.04 (gcc 4.8.4-2ubuntu1~14.04).
Resulting .so will lack the DT_NEEDED entry for libibverbs:
marchand@ubuntu1404:~/dpdk$ ldd ./build/lib/librte_pmd_mlx4.so
linux-vdso.so.1 => (0x00007fff87ebb000)
libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007f2ced21a000)
/lib64/ld-linux-x86-64.so.2 (0x00007f2ced821000)
And trying to load it in testpmd triggers this error:
[...]
EAL: librte_pmd_mlx4.so: undefined symbol: ibv_query_port
[...]
After some strace, the problem comes from the --as-needed option passed to the
linker.
It is safer to specify libraries we depend on after the objects we are linking
into a shared library, especially when the linker is invoked with options like
--as-needed.
Fixes: bef06a8a06 ("mk: set library dependencies in shared object file")
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
created the new xgene1 machine target to address the difference
in optional armv8-a CRC extension availability compared to
default armv8-a machine target(enabled CRC extension by default)
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
armv8-a has optional CRC32 extension, march=armv8-a+crc enables code
generation for the ARMv8-A architecture together with
the optional CRC32 extensions.
added RTE_MACHINE_CPUFLAG_CRC32 to detect the availability of
CRC32 extension in compile time. At run-time, The RTE_CPUFLAG_CRC32
can be used to find the availability.
armv8-a+crc target support added in GCC 4.9,
Used inline assembly and emulated __ARM_FEATURE_CRC32 to work
with tool-chain < 4.9
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch provides the initial implementation of the AES-NI multi-buffer
based crypto poll mode driver using DPDK's new cryptodev framework.
This PMD is dependent on Intel's multibuffer library, see the whitepaper
"Fast Multi-buffer IPsec Implementations on Intel® Architecture
Processors", see ref 1 for details on the library's design and ref 2 to
download the library itself. This initial implementation is limited to
supporting the chained operations of "hash then cipher" or "cipher then
hash" for the following cipher and hash algorithms:
Cipher algorithms:
- RTE_CRYPTO_CIPHER_AES_CBC (with 128-bit, 192-bit and 256-bit keys supported)
Authentication algorithms:
- RTE_CRYPTO_AUTH_SHA1_HMAC
- RTE_CRYPTO_AUTH_SHA256_HMAC
- RTE_CRYPTO_AUTH_SHA512_HMAC
- RTE_CRYPTO_AUTH_AES_XCBC_MAC
Important Note:
Due to the fact that the multi-buffer library is designed for
accelerating IPsec crypto operation, the digest's generated for the HMAC
functions are truncated to lengths specified by IPsec RFC's, ie RFC2404
for using HMAC-SHA-1 with IPsec specifies that the digest is truncate
from 20 to 12 bytes.
Build instructions:
To build DPDK with the AESNI_MB_PMD the user is required to download
(ref 2) and compile the multi-buffer library on there system before
building DPDK. The environmental variable AESNI_MULTI_BUFFER_LIB_PATH
must be exported with the path where you extracted and built the multi
buffer library and finally set CONFIG_RTE_LIBRTE_PMD_AESNI_MB=y in
config/common_linuxapp.
Current status: It's doesn't support crypto operation
across chained mbufs, or cipher only or hash only operations.
ref 1:
https://www-ssl.intel.com/content/www/us/en/intelligent-systems/intel-technology/fast-multi-buffer-ipsec-implementations-ia-processors-p
ref 2: https://downloadcenter.intel.com/download/22972
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
This patch adds a PMD for the Intel Quick Assist Technology DH895xxC
hardware accelerator.
This patch depends on a QAT PF driver for device initialization. See
the file docs/guides/cryptodevs/qat.rst for configuration details
This patch supports a limited subset of QAT device functionality,
currently supporting chaining of cipher and hash operations for the
following algorithmsd:
Cipher algorithms:
- RTE_CRYPTO_CIPHER_AES_CBC (with 128-bit, 192-bit and 256-bit keys supported)
Hash algorithms:
- RTE_CRYPTO_AUTH_SHA1_HMAC
- RTE_CRYPTO_AUTH_SHA256_HMAC
- RTE_CRYPTO_AUTH_SHA512_HMAC
- RTE_CRYPTO_AUTH_AES_XCBC_MAC
Some limitation on this patchset which shall be contributed in a
subsequent release:
- Chained mbufs are not supported.
- Hash only is not supported.
- Cipher only is not supported.
- Only in-place is currently supported (destination address is
the same as source address).
- Only supports session-oriented API implementation (session-less
APIs are not supported).
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: John Griffin <john.griffin@intel.com>
Signed-off-by: Des O Dea <des.j.o.dea@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
This library add support for adding a chain of offload operations to a
mbuf. It contains the definition of the rte_mbuf_offload structure as
well as helper functions for attaching offloads to mbufs and a mempool
management functions.
This initial implementation supports attaching multiple offload
operations to a single mbuf, but only a single offload operation of a
specific type can be attach to that mbuf.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch contains the initial proposed APIs and device framework for
integrating crypto packet processing into DPDK.
features include:
- Crypto device configuration / management APIs
- Definitions of supported cipher algorithms and operations.
- Definitions of supported hash/authentication algorithms and
operations.
- Crypto session management APIs
- Crypto operation data structures and APIs allocation of crypto
operation structure used to specify the crypto operations to
be performed on a particular mbuf.
- Extension of mbuf to contain crypto operation data pointer and
extra flags.
- Burst enqueue / dequeue APIs for processing of crypto operations.
Signed-off-by: Des O Dea <des.j.o.dea@intel.com>
Signed-off-by: John Griffin <john.griffin@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Add virtual PMD which communicates with COMBO cards through sze2
layer using libsze2 library.
Since link_speed is uint16_t, there can not be used number for 100G
speed, therefore link_speed is set to ETH_LINK_SPEED_10G until the
type of link_speed is solved.
Signed-off-by: Matej Vido <matejvido@gmail.com>
When using a linker option not known by the compiler like -rpath,
the library linkage was failing.
It is fixed by prefixing the option with -Wl, as it is done in other
makefiles.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This patch changes the ICC conditional check to disable
-no-inline-max-size and -no-inline-max-total-size to be
for all versions of icc greater than 14 and not just for version 15.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Created the new thunderx machine target to address difference
in "cache line size" and "-mcpu=thunderx" vs default armv8-a machine target
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Make DPDK run on ARMv7-A architecture. This patch assumes
ARM Cortex-A9. However, it is known to be working on Cortex-A7
and Cortex-A15.
Signed-off-by: Vlastimil Kosar <kosar@rehivetech.com>
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: David Marchand <david.marchand@6wind.com>
There several issues with alignment when compiling for ARMv7.
They are not considered to be fatal (ARMv7 supports unaligned
access of 32b words), so we just leave them as warnings. They
should be solved later, however.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Vlastimil Kosar <kosar@rehivetech.com>
Acked-by: David Marchand <david.marchand@6wind.com>
This implementation is based on IBM POWER version of
rte_cpuflags. We use software emulation of HW capability
registers, because those are usually not directly accessible
from userspace on ARM.
Signed-off-by: Vlastimil Kosar <kosar@rehivetech.com>
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: David Marchand <david.marchand@6wind.com>
In its current state, this driver implements the bare minimum to initialize
itself and Mellanox ConnectX-4 adapters without doing anything else
(no RX/TX for instance). It is disabled by default since it is based on the
mlx4 driver and also depends on libibverbs.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Or Ami <ora@mellanox.com>
Otherwise building with KERNELCC="ccache gcc" will fail:
ccache: invalid option -- 'p'
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The malloc library is now part of the EAL.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
librte_pmd_mlx4.so needs to be linked with libibverbs otherwise, the PMD is
not able to open Mellanox devices and the following message is printed by
testpmd at startup
"librte_pmd_mlx4: cannot access device, is mlx4_ib loaded?".
Applications dependency on libibverbs are moved to be only valid in static
mode, in shared mode, applications do not depend on it anymore,
librte_pmd_mlx4.so keeps this dependency and thus is linked with libibverbs.
MLX4 cannot be supported in combined shared library because there is no clean
way of adding -libverbs to the combined library.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Some .so libraries needs to be linked with external libraries. For that the
LDLIBS and EXTRA_LDFLAGS variables should be present on the link line when
those .so files are created. PMD Makefile is responsible for filling the
LDLIBS variable with the link to the external library it needs.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This is build infrastructure changes for bnx2x driver.
- enable BNX2X poll mode driver in default config.
- add it to mk
- put entry in MAINTAINERS
Note: I intentionally did not list myself as maintainer of this
driver. QLogic has discussed taking over as maintainer.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Harish Patil <harish.patil@qlogic.com>
proc_info displays statistics information including extended stats for
given DPDK ports and dumps the memory information for DPDK.
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This commit adds a poll mode driver for the mPIPE hardware present on
TILE-Gx SoCs.
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Signed-off-by: Zhigang Lu <zlu@ezchip.com>
This commit adds support for the TILE-Gx platform, as well as the TILE
CPU architecture. This architecture port is fairly simple due to its
reliance on generics for most arch stuff.
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Signed-off-by: Zhigang Lu <zlu@ezchip.com>
The library name is now being pinned to "dpdk" instead of intel_dpdk,
powerpc_dpdk, etc. As a result, we no longer need this config item.
This patch removes it.
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Signed-off-by: Zhigang Lu <zlu@ezchip.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
When next ABI is enabled, the shared lib extension is .so.x.1.
That's why a double basename was introduced.
But the "ifeq NEXT_ABI" was forgotten, removing the .so
extension when NEXT_ABI is disabled.
It was preventing the linker from finding the .so libraries.
Fixes: 506f51cc0d ("mk: enable next abi preview")
Reported-by: John McNamara <john.mcnamara@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
When a change makes really hard to keep ABI compatibility,
instead of waiting next release to break the ABI, it is smoother
to introduce the new code as a preview and disable it when packaging.
The flag RTE_NEXT_ABI must be used to "ifdef" the new code.
When the release is out, a dynamically linked application can use
the new shared libraries with the old ABI while developpers can prepare
their application for the next ABI by reading the deprecation notice
and easily testing the new code.
When starting the next release cycle, the "ifdefs" will be removed
and the ABI break will be marked by incrementing LIBABIVER. The map
files will also be updated.
The default value is enabled to be developer compliant.
The packagers must disable it as done in pkg/dpdk.spec.
When enabled, all shared library numbers are incremented by appending
a minor .1 to the old ABI number. In the next release, only impacted
libraries will have a major +1 increment.
The impacted libraries must provide an alternative map file to use
with this option.
The ABI policy is updated.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
CONFIG_RTE_BUILD_SHARED_LIB and CONFIG_RTE_BUILD_COMBINE_LIBS does not
have quotes in their values (only y or n). That's why the variables
RTE_BUILD_SHARED_LIB and RTE_BUILD_COMBINE_LIBS are always identical to
their CONFIG_ counterpart, and are useless.
In order to have consistent naming of config options in the makefiles,
these options are removed and the "CONFIG_ prefixed" variables are used.
Fixes: e25e4d7ef1 ("mk: shared libraries")
Fixes: 4d3d79e7a5 ("mk: combined library")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
When a target is finished building, it reports just "Build complete".
When building multiple targets simultaneously, e.g.
make install T=x86_64-native-linuxapp-*
and one target fails, it's not always obvious which of the builds
failed. To help this, we add the actual target that is completed to the
"Build complete" message.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Adds cxgbe poll mode driver for DPDK under drivers/net/cxgbe directory.
This patch:
1. Adds the Makefile to compile cxgbe pmd.
2. Registers and initializes the cxgbe pmd driver.
Enable cxgbe PMD for compilation and linking with changes to:
1. config/common_linuxapp to add macros for cxgbe pmd.
2. drivers/net/Makefile to add cxgbe pmd to the compile list.
3. mk/rte.app.mk to add cxgbe pmd to link.
Update MAINTAINERS file to claim responsibility for the cxgbe PMD.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
[Thomas: add disabled config for bsdapp]
When we get the address of vring descriptor table in VHOST_SET_VRING_ADDR
message, will try to reallocate vhost device and virt queue to the same
numa node.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
On Fedora 22, the "ar" binary operates by default in deterministic mode,
making the "u" parameter irrelevant, and leading to warning messages
getting printed in the build output like below.
INSTALL-LIB librte_kvargs.a
ar: `u' modifier ignored since `D' is the default (see `U')
There are two options to remove these warnings:
* add in the "U" flag to make "ar" non-deterministic again
* remove the "u" flag to have all objects always updated
This patch takes the second approach. It also explicitly adds in the "D"
flag to make behaviour consistent across different distributions which
may have different defaults.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The combined lib was being created after building the lib root dir.
With the new directory hierarchy, it should be created after the
drivers root dir instead.
Fixes: 980ed498eb ("drivers: create new directory")
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Li Wei <lw@cn.fujitsu.com>
Simplify the ifdefs in rte.app.mk to make the code more
readable and maintainable by introducing a internal
_LDLIBS-y variable to build up the LDLIBS variable.
The new internal variable _LDLIBS-y should not be
used outside of the rte.app.mk file.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
NO_AUTOLIBS is not required as it was not used or defined in the config files.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
With GCC 4.4.7 from CentOS 6.5, the following errors arise:
lib/librte_pmd_ixgbe/ixgbe_rxtx.c: In function 'ixgbe_dev_rx_queue_setup':
lib/librte_pmd_ixgbe/ixgbe_rxtx.c:2509: error: missing initializer
lib/librte_pmd_ixgbe/ixgbe_rxtx.c:2509: error: (near initialization for 'dev_info.driver_name')
lib/librte_pmd_ixgbe/ixgbe_rxtx.c: In function 'ixgbe_set_rsc':
lib/librte_pmd_ixgbe/ixgbe_rxtx.c:4072: error: missing initializer
lib/librte_pmd_ixgbe/ixgbe_rxtx.c:4072: error: (near initialization for 'dev_info.driver_name')
lib/librte_pmd_ixgbe/ixgbe_rxtx.c: In function 'ixgbe_recv_pkts_lro_single_alloc':
lib/librte_pmd_ixgbe/ixgbe_rxtx.c:1479: error: 'next_rsc_entry' may be used uninitialized in this function
lib/librte_pmd_ixgbe/ixgbe_rxtx.c:1480: error: 'next_rxe' may be used uninitialized in this function
The "missing initializer" warning is a GCC bug which seems fixed in 4.7.
The same warning is thrown by clang.
The "may be used uninitialized" warning is another GCC bug which seems fixed in 4.7.
Fixes: 8eecb3295a ("ixgbe: add LRO support")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com>
Null PMD was not found when using a statically linked application:
EAL: no driver found for eth_null1
EAL: failed to initialize eth_null1 device
Fixes: c743e50c47 ("null: new poll mode driver")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The virtio pmd is not restricted to uio anymore.
Fixes: da978dfdc4 ("virtio: use port IO to get PCI resource")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
In case of documents without image, an empty rm command can be seen if V=1.
Remove it to avoid disturbing debugging.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
The fuse library is needed for vhost-cuse as required in commit 28a1ccca41.
The case vhost-user was forgotten for application linking.
Fixes: 28a1ccca41 ("vhost: add build option for vhost-user")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Re-ordered the guide-pdf-% and guide-% rules to allow
the doc-guides-pdf target to build with make 3.81. It
builds unmodified with all later versions of make.
Fixes: ebf8050afd ("doc: add pdf output")
Reported-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add make system support for building PDF versions of
the guides. Requires Python Sphinx and TexLive Full.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Move the rte.extvars.mk to an internal directory and
update rte.vars.mk to find the file in the new location.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The '-fdirectives-only' flag doesn't exist in cpp of FreeBSD.
To remove expanding macros when parsing the config files won't
add any issue.
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This PMD manages all variants of Mellanox ConnectX-3 (EN 40, EN 10, Pro EN
40) as well as their virtual functions in SR-IOV context through IB Verbs
(libibverbs) and the dedicated user-space driver (libmlx4).
It is disabled by default due to dependencies on these libraries and only
supports Linux userland at the moment partly because /sys (sysfs) support is
required.
Also claim responsibility in the MAINTAINERS file.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Olga Shern <olgas@mellanox.com>
This app demonstrate usage of new rte_jobstats library.
It is basically the orginal l2fwd with following modifications to met
library requirements:
- main_loop() was split into two jobs: forward job and flush job. Logic
for those jobs is almost the same as in original application.
- stats is moved to rte_alarm callback to not introduce overhead of
printing.
- stats are expanded to show rte_jobstats statistics.
- added new parameter '-l' to automatic thousands separator.
Comparing original l2fwd and l2fwd-jobstats apps will show approach what
is needed to properly write own application with rte_jobstats
measurements.
New available statistics:
- Total and % of fwd and flush execution time
- management time - overhead of rte_timer + overhead of rte_jobstats
library
- Idle time and % of time spent waiting for fwd or flush to be ready to
execute.
- per job execution time and period.
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Commit 71f0ab1849 broke compilation
on some versions of Debian and Ubuntu where gcc has been modified
to only emit MAJOR.MINOR part of the version from 'gcc -dumpversion'.
Drop the micro-version from gcc version comparisons to work around
this, it wasn't being used for anything anyway.
Fixes: 71f0ab1849 ("mk: rework gcc version detection to permit versions newer than 4.x")
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Separately comparing major and minor versions becomes seriously clumsy
when with major version changes, convert the entire version string into
a numeric value (ie 4.6.0 becomes 460 and 5.0.0 becomes 500) and use
that for comparisons, eliminate unnecessary negations while at it.
This makes the comparisons simpler, more obvious and makes gcc 5.0
naturally recognized at least as capable as newest 4.x.
This three-digit scheme would run into trouble if gcc ever went to
two-digit version segments, but that hasn't happened in the last 10+
years so it seems like a safe assumption.
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
x32 ABI provides benefits of x86-64 while using 32-bit pointers and
avoiding overhead of 64-bit pointers.
Test report: http://dpdk.org/ml/archives/dev/2015-February/012599.html
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Tested-by: Haifeng Tang <haifengx.tang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Adding new reorder unit test for the test app.
The command to run the unit test from the test shell is: reorder_autotest
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
1. Add init function to scan and initialize fm10k PF device.
2. Add implementation to register fm10k pmd PF driver.
3. Add 3 functions fm10k_dev_configure, fm10k_stats_get and
fm10k_stats_get.
4. Add fm10k.h to define macros and basic data structure.
5. Add fm10k_logs.h to control log message output.
6. Change config/common_bsdapp and config/common_linuxapp, add
macros to control fm10k pmd driver compile for linux and bsd.
7. Add Makefile.
8. Change lib/Makefile to add fm10k driver into compile list.
9. Change mk/rte.app.mk to add fm10k lib into link.
10. Add ABI version of librte_pmd_fm10k
Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
librte_vhost is not a plugin but a library, move it to proper section
to fix sample app build in shared, non-combined library setup.
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
This is all-important now that the libraries are versioned: DT_SONAME
presence instructs the runtime dynamic linker to load the shared object
by the versioned name in DT_SONAME instead of the the unversioned symlink
name used during build.
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
To differentiate libraries that break ABI, we add a library version number
suffix to the library, which must be incremented when a given libraries ABI is
broken. This patch enforces that addition, sets the initial abi soname
extension to 1 for each library and creates a symlink to the base SONAME so that
the test applications will link properly.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Add initial pass header files to support symbol versioning.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
This reverts commit ca0038c009.
It forces clean target of application to have double-colon.
As stated in make doc:
"Double-colon rules are somewhat obscure and not often very useful"
And it's not needed since POSTCLEAN allow to add some clean targets.
Reported-by: Olivier Matz <olivier.matz@6wind.com>
Reported-by: John Mcnamara <john.mcnamara@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The vhost library relies on libfuse, and thats included when we do a normal
shared object build, but when we specify combined libs, its gets left out. Add
it back in.
Reported-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
In some cases application may want to have additional rules
for clean. This can be handled by allowing the double colon
form of rule.
https://www.gnu.org/software/make/manual/html_node/Double_002dColon.html
Single colon and double colon rules for same target causes
an error.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch add Support for ICC 15.
ICC 15 changed inline-max-size and inline-max-total-size default values,
so for ICC 15 flags -no-inline-max-size -no-inline-max-total-size must be added.
additionally disable compile error for:
13368 - loop was not vectorized with "vector always assert"
15527 - loop was not vectorized: function call to fprintf cannot be vectorize
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
When building static archives with CONFIG_COMBINED_LIBS, we still need to
specify --whole-archive to pull in all the proper constructors.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Lyn M <netinal7@gmail.com>
Tested-by: Lyn M <netinal7@gmail.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
It appeared in commit 21cdc2e77a ("fix 32-bit link with gcc")
that linker options must be prefixed by -Wl, when using CC.
So CPU_LDFLAGS is prefixed in rte.lib.mk.
Then commit 815cfb7925 ("fix link of combined shared library using CC")
introduced another prefixing of CPU_LDFLAGS in rte.sharelib.mk,
included in lib/Makefile.
Because CPU_LDFLAGS is an exported variable, the prefixing is done twice.
Initial patch of commit 815cfb7925 had a workaround but it hasn't
been applied in favor of this proper fix.
Now variables are not overriden when prefixing.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The option "-z muldefs" was set only if not using ld directly.
By the way, this option seems to be a useless hack introduced
with shared and combined libraries support (e25e4d7ef1).
The clean approach is to remove it.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
RTE_LIBNAME was defined only if BUILDING_RTE_SDK.
So external applications like examples were trying to link with -l
without any library name.
This bug appeared after fixing link to combined library (removing
link to separate libraries).
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Commit 944088c2ab ("fix link to combined library") introduced
a check with a wrong configuration option name.
So link is broken in the case combined library is not enabled.
main.o: In function `rte_pktmbuf_free':
main.c:(.text+0x9c): undefined reference to `per_lcore__lcore_id'
Signed-off-by: Yong Liu <yong.liu@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
[Thomas: fix option name in comments]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
