I am a new hns3 pmd developer and reviewer for upstreaming hns3
pmd driver. So I want to help out here as well.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Adding bare minimum PMD library and doc build infrastructure
and claim the maintainership for txgbe PMD.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
I'm moving on to a new position in November and won't be able to continue
as a stack library maintainer.
Thanks to fellow maintainer Olivier, and the rest of the DPDK community,
for the support over the past few years.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Note that config/rte_config.h contains several configuration
switches, providing for fine control of the PMD's
runtime behaviour.
The meson infrastructure is expanded as additional files are
added to this patchset.
Adds announcement of availability of the new driver
for Intel Dynamic Load Balancer 1.0 hardware.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Adds the meson build infrastructure, which includes
compile-time constants in rte_config.h. DLB2 is
only supported on Linux 64 bit X86 platforms at this time.
Adds announcement of availability for the new driver
for Intel Dynamic Load Balancer 2.0 hardware.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
This example sets up a scenario that VXLAN packets can be received
by different PF queues based on VNID and each queue is bound to a VM
with a VNID so that the VM can receive its inner packets.
Usually, OVS is used to do the software encap/decap for VXLAN packets.
And the VXLAN packets offloading can be replaced with flow rules in
testpmd like Chapter "Sample VXLAN flow rules" in Testpmd Application
User Guide.
And this example hasn't been used for a long time.
So deprecate this example.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The sub-directories of config/ are maintained by
different architecture maintainers.
Some wildcards are used to describe the lib, drivers and app files
which are specific to some architectures.
The EAL Arm files have split responsibilities depending on 32/64 suffix,
and the common files are shared between Armv7 and Armv8 sections.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Use the newer macros defined by meson in all DPDK source code, to ensure
there are no errors when the old non-standard macros are removed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
I'm resigning from DPDK virtio and vhost maintainer as I'm leaving Intel.
Sincerely thank Maxime, Chenbo and the community for all the support.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Since librte_ipsec was first introduced in 19.02 and there were no changes
in it's public API since 19.11, it should be considered mature enough to
remove the 'experimental' tag from it.
The RTE_SATP_LOG2_NUM enum is also being dropped from rte_ipsec_sa.h to
avoid possible ABI problems in the future.
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add meson based build infrastructure along with the
OTX2 regexdev (REE) device functions.
Add Marvell OCTEON TX2 regex guide.
Signed-off-by: Guy Kaneti <guyk@marvell.com>
This patch enables the optimized calculation of CRC32-Ethernet and
CRC16-CCITT using the AVX512 and VPCLMULQDQ instruction sets. This CRC
implementation is built if the compiler supports the required instruction
sets. It is selected at run-time if the host CPU, again, supports the
required instruction sets.
Signed-off-by: Mairtin o Loingsigh <mairtin.oloingsigh@intel.com>
Signed-off-by: David Coyle <david.coyle@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Jasvinder Singh <jasvinder.singh@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds support for run-time selection of the optimal
architecture-specific CRC path, based on the supported instruction set(s)
of the CPU.
The compiler option checks have been moved from the C files to the meson
script. The rte_cpu_get_flag_enabled function is called automatically by
the library at process initialization time to determine which
instructions the CPU supports, with the most optimal supported CRC path
ultimately selected.
Signed-off-by: Mairtin o Loingsigh <mairtin.oloingsigh@intel.com>
Signed-off-by: David Coyle <david.coyle@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Jasvinder Singh <jasvinder.singh@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Adding Connor as additional maintainer to bonding.
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
As decided in the Technical Board in November 2019,
the kernel module igb_uio is moved to the dpdk-kmods repository
in the /linux/igb_uio/ directory.
Minutes of Technical Board meeting:
https://mails.dpdk.org/archives/dev/2019-November/151763.html
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
RCU library supporting quiescent state was introduced
in 19.05 release and has been around 4 releases, it
should be mature enough to remove the experimental tag.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: David Christensen <drc@linux.vnet.ibm.com>
Since rte_mcslock APIs were introduced in 19.08 release,
it is now possible to remove the experimental tag from:
rte_mcslock_lock()
rte_mcslock_unlock()
rte_mcslock_trylock()
rte_mcslock_is_locked()
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Phil Yang <phil.yang@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: David Christensen <drc@linux.vnet.ibm.com>
The devtools/get-maintainer.sh script does not work with examples
because there is no title line between them: it returns a longer list
than expected.
Add the missing titles for each example to fix this behavior.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
The stack library was first released in 19.05, and its interfaces have been
stable since their initial introduction. This commit promotes the full
interface to stable, starting with the 20.11 major version.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The temporary flag RTE_ETH_DEV_CLOSE_REMOVE is removed.
It was introduced in DPDK 18.11 in order to give time for PMDs to migrate.
The old behaviour was to free only queues when closing a port.
The new behaviour is calling rte_eth_dev_release_port() which does
three more tasks:
- trigger event callback
- reset state and few pointers
- free all generic port resources
The private port resources must be released in the .dev_close callback.
The .remove callback should:
- call .dev_close callback
- call rte_eth_dev_release_port()
- free multi-port device shared resources
Despite waiting two years, some drivers have not migrated,
so they may hit issues with the incompatible new behaviour.
After sending emails, adding logs, and announcing the deprecation,
the only last solution is to declare these drivers as unmaintained:
ionic, liquidio, nfp
Below is a summary of what to implement in those drivers.
* The freeing of private port resources must be moved
from the ".remove(device)" function to the ".dev_close(port)" function.
* If a generic resource (.mac_addrs or .hash_mac_addrs) cannot be freed,
it must be set to NULL in ".dev_close" function to protect from
subsequent rte_eth_dev_release_port() freeing.
* Note 1:
The generic resources are freed in rte_eth_dev_release_port(),
after ".dev_close" is called in rte_eth_dev_close(), but not when
calling ".dev_close" directly from the ".remove" PMD function.
That's why rte_eth_dev_release_port() must still be called explicitly
from ".remove(device)" after calling the ".dev_close" PMD function.
* Note 2:
If a device can have multiple ports, the common resources must be freed
only in the ".remove(device)" function.
* Note 3:
The port is supposed to be in a stopped state when it is closed.
If it is not the case, it is free to the PMD implementation
how to react when trying to close a non-stopped port:
either try to stop it automatically or just return an error.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Move libefx (base driver) into common driver.
Prepare to add vDPA driver which will use the common driver as well.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Add new example application to showcase the API of the newly
introduced SWX pipeline type.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch updates Mellanox maintainers mails from
the Mellanox domain to Nvidia domain.
Cc: stable@dpdk.org
Signed-off-by: Ori Kam <orika@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Removed the documentation maintainers.
The documentation is now, currently, unmaintained.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
There is new link_speed value introduced. It's INT_MAX value which
means that speed is unknown. To simplify processing of the value
in application, new function is added which convert link_speed to
string. Also dpdk examples have many duplicated code which format
entire link status structure to text.
This commit adds two functions:
* rte_eth_link_speed_to_str - format link_speed to string
* rte_eth_link_to_str - convert link status structure to string
Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Co-work with Jeff, setting me as new maintainer for igb, igc and ixgbe.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The BPF lib was introduced in 18.05.
There were no changes in its public API since 19.11.
It should be mature enough to remove its 'experimental' tag.
RTE_BPF_XTYPE_NUM is also being dropped from rte_bpf_xtype to
avoid possible ABI problems in the future.
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Make is not supported for compiling DPDK, the config files are no
longer needed.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Make is no longer supported for compiling DPDK, scripts used with make
are no longer needed.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The git trees dpdk-next-qos and dpdk-next-pipeline were created
to share the load of patches merging.
It has been decided in the Technical Board that the load is not big
enough to justify keeping these repositories.
The patches for ethdev TM and MTR will be managed in dpdk-next-net.
The sched and meter libraries will be managed in the main tree.
The packet framework will be managed in the main tree as well.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Chenbo has done an excellent job in reviewing,
contributing and testing patches.
This patch adds him as co-maintainer for Vhost, Virtio
and vDPA components.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
The script checkpatch.pl (used in checkpatches.sh) can use a dictionary
from the codespell project to check spelling.
There are multiple dictionaries to be used.
The script build-dict.sh concatenate multiple dictionaries and remove
some annoying false positives.
The dictionary built by this script must be saved in a file which
is referenced with the environment variable DPDK_CHECKPATCH_CODESPELL.
The easiest is to export this variable in ~/.config/dpdk/devel.config.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Following the new RegEx class.
There is a need to create a dedicated test application in order to
validate this class and PMD.
Unlike net device this application loads data from a file.
This commit introduces the new RegEx test app.
The basic app flow:
1. Configure the RegEx device to use one queue, and set the rule
database, using precompiled file.
2. Allocate mbufs based on the requested number of jobs, each job will
i get one mbuf.
3. Enqueue as much as possible jobs.
4. Dequeue jobs.
5. if the number of dequeue jobs < requested number of jobs job to step
Signed-off-by: Ori Kam <orika@mellanox.com>
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
This commit introduce the RegEx poll mode drivers class, and
adds Mellanox RegEx PMD.
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Signed-off-by: Ori Kam <orika@mellanox.com>
Setting Martin Spinler as new and only maintainer for Netcope
libsze2/nfb drivers
Signed-off-by: Jakub Neruda <neruda@netcope.com>
Acked-by: Martin Spinler <spinler@cesnet.cz>
DPDK allows calling some part of its API from a non-EAL thread but this
has some limitations.
OVS (and other applications) has its own thread management but still
want to avoid such limitations by hacking RTE_PER_LCORE(_lcore_id) and
faking EAL threads potentially unknown of some DPDK component.
Introduce a new API to register non-EAL thread and associate them to a
free lcore with a new NON_EAL role.
This role denotes lcores that do not run DPDK mainloop and as such
prevents use of rte_eal_wait_lcore() and consorts.
Multiprocess is not supported as the need for cohabitation with this new
feature is unclear at the moment.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The experimental tags were removed, but the comment
is still having API classification as EXPERIMENTAL
Fixes: 931cc531aa ("rawdev: remove experimental tag")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
As RegEx usage become more used by DPDK applications, for example:
* Next Generation Firewalls (NGFW)
* Deep Packet and Flow Inspection (DPI)
* Intrusion Prevention Systems (IPS)
* DDoS Mitigation
* Network Monitoring
* Data Loss Prevention (DLP)
* Smart NICs
* Grammar based content processing
* URL, spam and adware filtering
* Advanced auditing and policing of user/application security policies
* Financial data mining - parsing of streamed financial feeds
* Application recognition.
* Dmemory introspection.
* Natural Language Processing (NLP)
* Sentiment Analysis.
* Big data database acceleration.
* Computational storage.
Number of PMD providers started to work on HW implementation,
along side with SW implementations.
This lib adds the support for those kind of devices.
The RegEx Device API is composed of two parts:
- The application-oriented RegEx API that includes functions to setup
a RegEx device (configure it, setup its queue pairs and start it),
update the rule database and so on.
- The driver-oriented RegEx API that exports a function allowing
a RegEx poll Mode Driver (PMD) to simultaneously register itself as
a RegEx device driver.
RegEx device components and definitions:
+-----------------+
| |
| o---------+ rte_regexdev_[en|de]queue_burst()
| PCRE based o------+ | |
| RegEx pattern | | | +--------+ |
| matching engine o------+--+--o | | +------+
| | | | | queue |<==o===>|Core 0|
| o----+ | | | pair 0 | | |
| | | | | +--------+ +------+
+-----------------+ | | |
^ | | | +--------+
| | | | | | +------+
| | +--+--o queue |<======>|Core 1|
Rule|Database | | | pair 1 | | |
+------+----------+ | | +--------+ +------+
| Group 0 | | |
| +-------------+ | | | +--------+ +------+
| | Rules 0..n | | | | | | |Core 2|
| +-------------+ | | +--o queue |<======>| |
| Group 1 | | | pair 2 | +------+
| +-------------+ | | +--------+
| | Rules 0..n | | |
| +-------------+ | | +--------+
| Group 2 | | | | +------+
| +-------------+ | | | queue |<======>|Core n|
| | Rules 0..n | | +-------o pair n | | |
| +-------------+ | +--------+ +------+
| Group n |
| +-------------+ |<-------rte_regexdev_rule_db_update()
| | | |<-------rte_regexdev_rule_db_compile_activate()
| | Rules 0..n | |<-------rte_regexdev_rule_db_import()
| +-------------+ |------->rte_regexdev_rule_db_export()
+-----------------+
RegEx: A regular expression is a concise and flexible means for matching
strings of text, such as particular characters, words, or patterns of
characters. A common abbreviation for this is â~@~\RegExâ~@~].
RegEx device: A hardware or software-based implementation of RegEx
device API for PCRE based pattern matching syntax and semantics.
PCRE RegEx syntax and semantics specification:
http://regexkit.sourceforge.net/Documentation/pcre/pcrepattern.html
RegEx queue pair: Each RegEx device should have one or more queue pair to
transmit a burst of pattern matching request and receive a burst of
receive the pattern matching response. The pattern matching
request/response embedded in *rte_regex_ops* structure.
Rule: A pattern matching rule expressed in PCRE RegEx syntax along with
Match ID and Group ID to identify the rule upon the match.
Rule database: The RegEx device accepts regular expressions and converts
them into a compiled rule database that can then be used to scan data.
Compilation allows the device to analyze the given pattern(s) and
pre-determine how to scan for these patterns in an optimized fashion that
would be far too expensive to compute at run-time. A rule database
contains a set of rules that compiled in device specific binary form.
Match ID or Rule ID: A unique identifier provided at the time of rule
creation for the application to identify the rule upon match.
Group ID: Group of rules can be grouped under one group ID to enable
rule isolation and effective pattern matching. A unique group identifier
provided at the time of rule creation for the application to identify
the rule upon match.
Scan: A pattern matching request through *enqueue* API.
It may possible that a given RegEx device may not support all the
features
of PCRE. The application may probe unsupported features through
struct rte_regexdev_info::pcre_unsup_flags
By default, all the functions of the RegEx Device API exported by a PMD
are lock-free functions which assume to not be invoked in parallel on
different logical cores to work on the same target object. For instance,
the dequeue function of a PMD cannot be invoked in parallel on two logical
cores to operates on same RegEx queue pair. Of course, this function
can be invoked in parallel by different logical core on different queue
pair. It is the responsibility of the upper level application to
enforce this rule.
In all functions of the RegEx API, the RegEx device is
designated by an integer >= 0 named the device identifier *dev_id*
At the RegEx driver level, RegEx devices are represented by a generic
data structure of type *rte_regexdev*.
RegEx devices are dynamically registered during the PCI/SoC device
probing phase performed at EAL initialization time.
When a RegEx device is being probed, a *rte_regexdev* structure and
a new device identifier are allocated for that device. Then, the
regexdev_init() function supplied by the RegEx driver matching the
probed device is invoked to properly initialize the device.
The role of the device init function consists of resetting the hardware
or software RegEx driver implementations.
If the device init operation is successful, the correspondence between
the device identifier assigned to the new device and its associated
*rte_regexdev* structure is effectively registered.
Otherwise, both the *rte_regexdev* structure and the device identifier
are freed.
The functions exported by the application RegEx API to setup a device
designated by its device identifier must be invoked in the following
order:
- rte_regexdev_configure()
- rte_regexdev_queue_pair_setup()
- rte_regexdev_start()
Then, the application can invoke, in any order, the functions
exported by the RegEx API to enqueue pattern matching job, dequeue
pattern matching response, get the stats, update the rule database,
get/set device attributes and so on
If the application wants to change the configuration (i.e. call
rte_regexdev_configure() or rte_regexdev_queue_pair_setup()), it must
call rte_regexdev_stop() first to stop the device and then do the
reconfiguration before calling rte_regexdev_start() again. The enqueue and
dequeue functions should not be invoked when the device is stopped.
Finally, an application can close a RegEx device by invoking the
rte_regexdev_close() function.
Each function of the application RegEx API invokes a specific function
of the PMD that controls the target device designated by its device
identifier.
For this purpose, all device-specific functions of a RegEx driver are
supplied through a set of pointers contained in a generic structure of
type *regexdev_ops*.
The address of the *regexdev_ops* structure is stored in the
*rte_regexdev* structure by the device init function of the RegEx driver,
which is invoked during the PCI/SoC device probing phase, as explained
earlier.
In other words, each function of the RegEx API simply retrieves the
*rte_regexdev* structure associated with the device identifier and
performs an indirect invocation of the corresponding driver function
supplied in the *regexdev_ops* structure of the *rte_regexdev*
structure.
For performance reasons, the address of the fast-path functions of the
RegEx driver is not contained in the *regexdev_ops* structure.
Instead, they are directly stored at the beginning of the *rte_regexdev*
structure to avoid an extra indirect memory access during their
invocation.
RTE RegEx device drivers do not use interrupts for enqueue or dequeue
operation. Instead, RegEx drivers export Poll-Mode enqueue and dequeue
functions to applications.
The *enqueue* operation submits a burst of RegEx pattern matching
request to the RegEx device and the *dequeue* operation gets a burst of
pattern matching response for the ones submitted through *enqueue*
operation.
Typical application utilisation of the RegEx device API will follow the
following programming flow.
- rte_regexdev_configure()
- rte_regexdev_queue_pair_setup()
- rte_regexdev_rule_db_update() Needs to invoke if precompiled rule
database not
provided in rte_regexdev_config::rule_db for rte_regexdev_configure()
and/or application needs to update rule database.
- rte_regexdev_rule_db_compile_activate() Needs to invoke if
rte_regexdev_rule_db_update function was used.
- Create or reuse exiting mempool for *rte_regex_ops* objects.
- rte_regexdev_start()
- rte_regexdev_enqueue_burst()
- rte_regexdev_dequeue_burst()
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Ori Kam <orika@mellanox.com>
Rather than checking the binutils version number, which can lead to
unnecessary disabling of AVX512 if fixes have been backported to distro
versions, we can instead check the output of "as" from binutils to see if
it is correct.
The check in the script uses the minimal assembly reproduction code posted
to the public bug tracker for gcc/binutils for those issues [1]. If the
binutils bug is present, the instruction parameters - specifically the
displacement parameter - will be different in the disassembled output
compared to the input. Therefore the check involves assembling a single
instruction and disassembling it again, checking that the two match.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90028
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Ahead of changes to rework the file, move the pkg-config file generation to
a new directory under buildtools. This allows the meson code to be
separated out from the main meson.build for simplicity, and also allows any
additional scripts for working with the pkg-config files to be placed there
too.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Sunil Pai G <sunil.pai.g@intel.com>
