If txq's next-to-use plus nb_pkts equal txq's nb_tx_desc when using
SVE xmit algorithm, the txq's next-to-use will equal nb_tx_desc after
the xmit, this does not cause Tx exceptions, but may affect other ops
that depend on this field, such as tx_descriptor_status.
Fixes: f0c243a6cb ("net/hns3: support SVE Tx")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Currently, the number of Tx send bytes is obtained by accumulating the
length of the batch 'mbuf' packets of the current loop cycle.
Unfortunately, it uses svcntd (which means all lane, regardless of
whether the corresponding lane is valid) which may lead to overflow,
and thus refers to an invalid mbuf.
Because the SVE xmit algorithm applies only to a single mbuf, the
mbuf's data_len is equal pkt_len, so this patch fixes it by using
svaddv_u64(svbool_t pg, svuint64_t data_len) which only adds valid
lanes.
Fixes: fdcd6a3e02 ("net/hns3: add bytes stats")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
The Rx and Tx vector algorithm of hns3 PMD don't support PTP
function. Currently, hns3 driver uses 'pf->ptp_enable' to check
whether PTP is enabled so as to not select Rx and Tx vector
algorithm. And the variable is set when call rte_eth_timesync_enable().
Namely, it may not be set before selecting Rx/Tx function, let's say
the case: set PTP offload in dev_configure(), do dev_start() and then
call rte_eth_timesync_enable(). In this case, all PTP packets can not
be received to application. So this patch fixes the check based on the
RTE_ETH_RX_OFFLOAD_TIMESTAMP flag.
Fixes: 3ca3dcd651 ("net/hns3: fix vector Rx/Tx when PTP enabled")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Show whether support modifying VF VLAN filter or not.
Sample output changes:
+ -- support VF VLAN FILTER MOD: Yes
Signed-off-by: Jie Hai <haijie1@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Rename the function name with prefix hns3_ to keep the same code
style with other files and adjust some code to make it more readable.
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Fix code check warnings according to:
- function should have same name with previous declaration;
- local variable should no be referenced in macro referenced;
- macro argument 'adapter' should be enclosed in parentheses.
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Rename hns3 dump files and abstract a head file for dump.
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Increase the number of default Rx/Tx queue pairs to 8,
and add MQ feature flag to vDPA protocol features.
Signed-off-by: Abhimanyu Saini <absaini@amd.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Change cidx and pidx definition to mean used queue and avail
queue index respectively.
Signed-off-by: Abhimanyu Saini <absaini@amd.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Pickup new FW interface definitions for avail and used indexes.
Signed-off-by: Abhimanyu Saini <absaini@amd.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
The used/avail queue indexes are not bound by queue size,
because HW calculates descriptor entry index by performing
a simple modulo between queue index and queue_size.
So, do not check initial used and avail queue indexes
against queue size because it is possible for these
indexes to be greater than queue size in the
following cases:
1) The queue is created to be migrated into, or
2) The client issues a qstop/qstart after running datapath
Fixes: 4dda72dbde ("common/sfc_efx/base: add base virtio support for vDPA")
Cc: stable@dpdk.org
Signed-off-by: Abhimanyu Saini <absaini@amd.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Currently ring pmd does not support ``rte_power_monitor`` api.
This patch adds support by adding monitor callback that is called
whenever we enter sleep state and need to check if it is time to wake
up.
Signed-off-by: Herakliusz Lipiec <herakliusz.lipiec@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The relation between the isolated mode in ethdev flow API
and bifurcated driver behaviour was not clearly explained.
It is made clear in the how-to guide that isolated mode is required
for flow bifurcation to the kernel.
On the other side, the impact of the isolated mode on a bifurcated
driver is made more explicit.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Dariusz Sosnowski <dsosnowski@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
There's a bug in memif_stats_get() function due to confusion
between C2S (client->server) and S2C (server->client) rings,
causing a crash if there's a different number of Rx and Tx queues.
Fixit by selectiing the correct rings for Rx and Tx i.e for Rx, S2C
rings are selected and for Tx, C2S rings are selected.
Bugzilla ID: 734
Fixes: 09c7e63a71 ("net/memif: introduce memory interface PMD")
Cc: stable@dpdk.org
Signed-off-by: Huzaifa Rahman <huzaifa.rahman@emumba.com>
Reviewed-by: Joyce Kong <joyce.kong@arm.com>
The TAP device only lasts as long as the DPDK application that opened
it is running. This behavior is bad if the DPDK application needs
to be updated transparently without disturbing other services
using the tap device.
Add a persist feature to the TAP device. If this flag is set, the
kernel network device remains even if after the application has exited.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
On Linux and most other systems, network interface index is a 32-bit
integer. Indexes overflowing the 16-bit integer are frequently seen
when used inside a Docker container.
Fixes: 7c25284e30 ("net/tap: add netlink back-end for flow API")
Fixes: 2bc06869cd ("net/tap: add remote netdevice traffic capture")
Cc: stable@dpdk.org
Signed-off-by: Alex Kiselev <alex@bisonrouter.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
This commit extends the timeout for service_may_be_active()
from 100ms to 1000ms. Local testing on a idle and loaded system
(compiling DPDK with all cores) always completes after 1 ms.
The wait time for a service-lcore to finish is also extended
from 100ms to 1000ms.
The same timeout waiting code was duplicated in two tests, and
is now refactored to a standalone function avoiding duplication.
Reported-by: David Marchand <david.marchand@redhat.com>
Suggested-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
The dev->device.numa_node field is set by each bus driver for
every device it manages to indicate on which NUMA node this device lies.
When this information is unknown, the assigned value is not consistent
across the bus drivers.
Set the default value to SOCKET_ID_ANY (-1) by all bus drivers
when the NUMA information is unavailable. This change impacts
rte_eth_dev_socket_id() in the same manner.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Test basic functionality and demonstrate use of following thread
attributes api. Additionally, test attributes are processed when
supplied to rte_thread_create().
* rte_thread_attr_init
* rte_thread_attr_set_affinity
* rte_thread_attr_get_affinity
* rte_thread_attr_set_priority
Signed-off-by: Narcisa Vasile <navasile@linux.microsoft.com>
Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Test basic functionality and demonstrate use of following thread
lifetime api.
* rte_thread_create
* rte_thread_detach
* rte_thread_equal
* rte_thread_join
Existing tests are updated to adapt to the thread_main function
prototype change.
The dependency on the pthread API can then be removed.
Signed-off-by: Narcisa Vasile <navasile@linux.microsoft.com>
Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Add rte_thread_equal() that tests if two rte_thread_id are equal.
Signed-off-by: Narcisa Vasile <navasile@linux.microsoft.com>
Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
The *rte_thread_create()* function can optionally receive an
rte_thread_attr_t object that will cause the thread to be created with
the affinity and priority described by the attributes object. If
no rte_thread_attr_t is passed (parameter is NULL), the default
affinity and priority are used.
On Windows, the function executed by a thread when the thread starts is
represented by a function pointer of type DWORD (*func) (void*).
On other platforms, the function pointer is a void* (*func) (void*).
Performing a cast between these two types of function pointers to
uniformize the API on all platforms may result in undefined behavior.
To fix this issue, a wrapper that respects the signature required by
CreateThread() has been created on Windows.
Signed-off-by: Narcisa Vasile <navasile@linux.microsoft.com>
Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Implement thread attributes for:
* thread affinity
* thread priority
Implement functions for managing thread attributes.
Priority is represented through an enum that allows for two levels:
* RTE_THREAD_PRIORITY_NORMAL
* RTE_THREAD_PRIORITY_REALTIME_CRITICAL
Affinity is described by the rte_cpuset_t type.
An rte_thread_attr_t object can be set to the default values
by calling rte_thread_attr_init().
Signed-off-by: Narcisa Vasile <navasile@linux.microsoft.com>
Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
The rate parameter modified to uint32_t, so that it can work
for more than 64 Gbps.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
As announced in the deprecation note, remove the Rx offload flag
'RTE_ETH_RX_OFFLOAD_HEADER_SPLIT' and 'split_hdr_size' field from
the structure 'rte_eth_rxmode'. Meanwhile, the place where the examples
and apps initialize the 'split_hdr_size' field, and where the drivers
check if the 'split_hdr_size' value is 0 are also removed.
User can still use `RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT` for per-queue packet
split offload, which is configured by 'rte_eth_rxseg_split'.
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
In some cases application may receive a packet that should have been
received by the kernel. In this case application uses KNI or other means
to transfer the packet to the kernel.
With bifurcated driver we can have a rule to route packets matching
a pattern (example: IPv4 packets) to the DPDK application and the rest
of the traffic will be received by the kernel.
But if we want to receive most of the traffic in DPDK except specific
pattern (example: ICMP packets) that should be processed by the kernel,
then it's easier to re-route these packets with a single rule.
This commit introduces new rte_flow action which allows application to
re-route packets directly to the kernel without software involvement.
Add new testpmd rte_flow action 'send_to_kernel'. The application
may use this action to route the packet to the kernel while still
in the HW.
Example with testpmd command:
flow create 0 ingress priority 0 group 1 pattern eth type spec 0x0800
type mask 0xffff / end actions send_to_kernel / end
Signed-off-by: Michael Savisko <michaelsav@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
As part of DPDK 21.11 release, it was announced that the
use of attributes 'ingress' and 'egress' in 'transfer'
rules was deprecated. The transition period is over.
Starting from DPDK 22.11, the use of direction attributes
with attribute 'transfer' is not allowed. To enforce that,
a generic check is added to flow rule validate API.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
These actions are supported by no drivers.
The patch breaks ABI.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
The action is supported by no drivers.
The patch breaks ABI.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
The action is supported by no drivers.
The patch breaks ABI.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
The action is supported by no drivers.
The patch breaks ABI.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
Flags for IEEE1588 with ``PKT_*`` prefix has been changed to
``RTE_MBUF_F_*``. So in this patch updating the
old flags.
Fixes: b9b509246d ("mbuf: remove deprecated offload flags")
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
Tested-by: Yu Jiang <yux.jiang@intel.com>
Flags for IEEE1588 with ``PKT_*`` prefix has been changed to
``RTE_MBUF_F_*``. So in this patch updating the
old flags.
Fixes: b9b509246d ("mbuf: remove deprecated offload flags")
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
Using rte_mtr_color_in_protocol_set(), user can configure
combination of protocol headers, like outer_vlan and outer_ip,
can be enabled on given meter object.
But rte_mtr_meter_vlan_table_update() and
rte_mtr_meter_dscp_table_update() do not have information that
which table needs to be updated corresponding to protocol header
i.e. inner or outer.
Adding protocol paramreter will allow user to provide required
protocol information so that corresponding inner or outer table
can be updated corresponding to protocol header.
If user wishes to configure both inner and outer table then
API must be called twice with correct protocol information.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Create a new Flow API action: METER_MARK.
It Meters a packet stream and marks its packets with colors.
The marking is done on a metadata, not on a packet field.
Unlike the METER action, it performs no policing at all.
A user has the flexibility to create any policies with the help of
the METER_COLOR item later, only meter profile is mandatory here.
Add testpmd command line to match for METER_MARK action:
flow create ... actions meter_mark mtr_profile 20 / end
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Introduce a new Meter API to retrieve a Meter profile and policy
objects using the profile/policy ID previously created with
meter_profile_add() and meter_policy_create() functions.
That allows to save the pointer and avoid any lookups in the
corresponding lists for quick access during a flow rule creation.
Also, it eliminates the need for CIR, CBS and EBS calculations
and conversion to a PMD-specific format when the profile is used.
Pointers are destroyed and cannot be used after the corresponding
meter_profile_delete() or meter_policy_delete() are called.
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Extend modify_field Flow API with support of Meter Color Marker
modifications. It allows setting the packet's metadata to any
color marker: green, yellow or red. A user is able to specify
an initial packet color for Meter API or create simple Metering
and Marking flow rules based on his own coloring algorithm.
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Provide an ability to use a Color Marker set by a Meter
as a matching item in Flow API. The Color Marker reflects
the metering result by setting the metadata for a
packet to a particular codepoint: green, yellow or red.
Add testpmd command line to match on a meter color:
flow create 0 ingress group 0 pattern meter color is green / end
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Similar to RISC-V, the current version for LoongArch do not support
vector. Re-use vector processing stubs in ixgbe PMD defined for PPC
for LoongArch. This enables ixgbe PMD usage in scalar mode on
LoongArch.
The ixgbe PMD driver was validated with Intel X520-DA2 NIC and the
test-pmd application, l2fwd, l3fwd examples.
Signed-off-by: Min Zhou <zhoumin@loongson.cn>
Add all necessary elements for DPDK to compile and run EAL on
LoongArch64 Soc.
This includes:
- EAL library implementation for LoongArch ISA.
- meson build structure for 'loongarch' architecture.
RTE_ARCH_LOONGARCH define is added for architecture identification.
- xmm_t structure operation stubs as there is no vector support in
the current version for LoongArch.
Compilation was tested on Debian and CentOS using loongarch64
cross-compile toolchain from x86 build hosts. Functions were tested
on Loongnix and Kylin which are two Linux distributions supported
LoongArch host based on Linux 4.19 maintained by Loongson
Corporation.
We also tested DPDK on LoongArch with some external applications,
including: Pktgen-DPDK, OVS, VPP.
The platform is currently marked as linux-only because there is no
other OS than Linux support LoongArch host currently.
The i40e PMD driver is disabled on LoongArch because of the absence
of vector support in the current version.
Similar to RISC-V, the compilation of following modules has been
disabled by this commit and will be re-enabled in later commits as
fixes are introduced:
net/ixgbe, net/memif, net/tap, example/l3fwd.
Signed-off-by: Min Zhou <zhoumin@loongson.cn>
Build fails if RTE_LOG_DP_LEVEL is set to RTE_LOG_DEBUG.
Fix the same by including the required header.
lib/rcu/rte_rcu_qsbr.h:678:40: error: expected ‘)’ before ‘PRIu64’
678 | "%s: status: least acked token = %" PRIu64,
| ^~~~~~
Fixes: 30a1de105a ("lib: remove unneeded header includes")
Cc: stable@dpdk.org
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
<ctype.h> and <errno.h> need to be included for the build
since they were removed from <rte_common.h>.
examples/l2fwd-cat/cat.c: In function ‘parse_set’:
examples/l2fwd-cat/cat.c:66:16:
warning: implicit declaration of function ‘isblank’
66 | while (isblank(*str))
| ^~~~~~~
examples/l2fwd-cat/cat.c:18:1:
note: include ‘<ctype.h>’ or provide a declaration of ‘isblank’
17 | #include "cat.h"
+++ |+#include <ctype.h>
18 |
examples/l2fwd-cat/cat.c:70:15:
warning: implicit declaration of function ‘isdigit’
70 | if ((!isdigit(*str) && *str != '(') || *str == '\0')
| ^~~~~~~
examples/l2fwd-cat/cat.c:70:15:
note: include ‘<ctype.h>’ or provide a declaration of ‘isdigit’
examples/l2fwd-cat/cat.c:75:17:
error: ‘errno’ undeclared (first use in this function)
75 | errno = 0;
| ^~~~~
examples/l2fwd-cat/cat.c:18:1:
note: ‘errno’ is defined in header ‘<errno.h>’;
did you forget to ‘#include <errno.h>’?
17 | #include "cat.h"
+++ |+#include <errno.h>
Fixes: 72b452c5f2 ("eal: remove unneeded includes from a public header")
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
GCC-12 warns when a pointer of type union points to an array of same
defined size, as union internally gets paded with pad bytes.
../examples/common/neon/port_group.h:42:21: error: array subscript
'union <anonymous>[0]' is partly outside array bounds of
'uint16_t[5]' {aka 'short unsigned int[5]'}
[-Werror=array-bounds]
42 | pnum->u64 = gptbl[v].pnum;
| ^~
../examples/common/neon/port_group.h:21:23: note: object 'pn' of
size [0, 10]
21 | port_groupx4(uint16_t pn[FWDSTEP + 1], uint16_t *lp, uint16x8_t dp1
| ~~~~~~~~~^~~~~~~~~~~~~~~
../examples/common/neon/port_group.h:43:21: error: array subscript
'union <anonymous>[0]' is partly outside array bounds of
'uint16_t[5]' {aka 'short unsigned int[5]'} [-Werror=array-bounds]
43 | pnum->u16[FWDSTEP] = 1;
| ^~
Fixes: 732115ce38 ("examples/l3fwd: move packet group function in common")
Cc: stable@dpdk.org
Signed-off-by: Amit Prakash Shukla <amitprakashs@marvell.com>
