In function ena_com_set_hash_ctrl(), the return value is assigned to
"ret" variable, but it is not returned. Fix it by adding the return.
Fixes: 99ecfbf845 ("ena: import communication layer")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Jan Medala <jan@semihalf.com>
Before this patch, the management of dependencies between directories
had several issues:
- the generation of .depdirs, done at configuration is slow: it can take
more than one minute on some slow targets (usually ~10s on a standard
PC without -j).
- for instance, it is possible to express a dependency like:
- app/foo depends on lib/librte_foo
- and lib/librte_foo depends on app/bar
But this won't work because the directories are traversed with a
depth-first algorithm, so we have to choose between doing 'app' before
or after 'lib'.
- the script depdirs-rule.sh is too complex.
- we cannot use "make -d" for debug, because the output of make is used for
the generation of .depdirs.
This patch moves the DEPDIRS-* variables in the upper Makefile, making
the dependencies much easier to calculate. A DEPDIRS variable is still
used to process library dependencies in LDLIBS.
After this commit, "make config" is almost immediate.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Robin Jarry <robin.jarry@6wind.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The hardware may reject adding host_info in case support for
host_info is missing in the list of supported features. On the
other hand the list of supported features may contain support
for the host_info - typical bootstrap problem.
This patch solves it by removing check against support for
host_info attribute and improves error handling by reacting
only to host attribute write failure to the hardware.
Fixes: 99ecfbf845 ("ena: import communication layer")
Cc: stable@dpdk.org
Signed-off-by: Jakub Palider <jpa@semihalf.com>
While ENA can handle checksum calculations in almost all cases,
it cannot do so when DF bit in IPv4 header is not set,
that is DF=0, and TSO is requested. For that situation pseudo
header must be prepared manually.
Signed-off-by: Jakub Palider <jpa@semihalf.com>
Replace the raw I/O device memory read/write access with eal
abstraction for I/O device memory read/write access to fix
portability issues across different architectures.
Suggested-by: Jan Medala <jan@semihalf.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Jan Medala <jan@semihalf.com>
Previously the capability bitmap for Rx offloads was mistakenly taken
from Tx capability bitmap field. This patch fixes the problem.
Signed-off-by: Jakub Palider <jpa@semihalf.com>
This makes struct rte_eth_dev independent of struct rte_pci_device by
replacing it with a pointer to the generic struct rte_device.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Only the drivers itself can decide if it could fill PCI information fields
of dev_info.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Add a new macro RTE_PMD_REGISTER_KMOD_DEP() that allows a driver to
declare the list of kernel modules required to run properly.
Today, most PCI drivers require uio/vfio.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The next_to_clean and next_to_use ring pointers sometimes were kept
wrapped around ring size, sometimes used beyond this limit. From now
on we increment them without regard to ring size limits, but when
reading the values they are wrapped accordingly. Moreover unit16_t
are unsed whenever possible.
Signed-off-by: Tal Avraham <talavr@annapurnalabs.com>
Signed-off-by: Jakub Palider <jpa@semihalf.com>
All macros related to driver registeration renamed from DRIVER_*
to RTE_PMD_*
This includes:
DRIVER_REGISTER_PCI -> RTE_PMD_REGISTER_PCI
DRIVER_REGISTER_PCI_TABLE -> RTE_PMD_REGISTER_PCI_TABLE
DRIVER_REGISTER_VDEV -> RTE_PMD_REGISTER_VDEV
DRIVER_REGISTER_PARAM_STRING -> RTE_PMD_REGISTER_PARAM_STRING
DRIVER_EXPORT_* -> RTE_PMD_EXPORT_*
Fix PMDINFOGEN tool to look for matches of RTE_PMD_REGISTER_*.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Use sizeof dest rather than sizeof src for limiting copy length,
and replace strncpy with snprintf to ensure NULL termination.
Coverity issue: 127795
Fixes: 372c1af5ed ("net/ena: add dedicated memory area for extra device info")
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Remove the 'name' member from rte_pci_driver and move to generic
rte_driver.
Most of the PMD drivers were initially using DRIVER_REGISTER_PCI(<name>..)
as well as assigning a name to eth_driver.pci_drv.name member.
In this patch, only the original DRIVER_REGISTER_PCI(<name>..) name has
been populated into the rte_driver.name member - assignments through
eth_driver has been removed.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
[Shreyansh: Rebase and expand changes to newly added files]
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Simplify crypto and ethdev pci drivers init by using newly introduced
init macros and helpers.
Those drivers then don't need to register as "rte_driver"s anymore.
Exceptions:
- virtio and mlx* use RTE_INIT directly as they have custom initialization
steps.
- VDEV devices are not modified - they continue to use PMD_REGISTER_DRIVER.
Update documentation for replacing an example referring to
PMD_REGISTER_DRIVER.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Pure coding style, but it might make it easier later if we want to move
fields in rte_cryptodev_driver and eth_driver structures.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
As discussed in the past release, driver names are modified
to be more consistent, and the future driver should follow
this new convention.
Driver names consist of:
"driver category"_"driver folder name"_"optional extra name".
For example:
- Crypto null driver -> "crypto_null"
- Network IXGBE VF driver -> "net_ixgbe_vf"
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
drivers/net/ena/base/ena_com.c(346):
error #3656: variable "dev_node" may be used before its value is set
ENA_MEM_ALLOC_COHERENT_NODE(ena_dev->dmadev,
^
drivers/net/ena/base/ena_com.c(399):
error #3656: variable "prev_node" may be used before its value is set
ENA_MEM_ALLOC_COHERENT_NODE(ena_dev->dmadev,
^
Fixes: 3d3edc265f ("net/ena: make coherent memory allocation NUMA-aware")
Reported-by: Eoin Breen <eoin.breen@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Jan Medala <jan@semihalf.com>
Avoid submitting doorbell when:
* no packets have been submitted to TX
* no free resources have been submitted while RX
Sending doorbell without actual work to be performed by device
violates ENA specification and can lead to unpredictable behavior.
Fixes: 1173fca25a ("ena: add polling-mode driver")
Signed-off-by: Alexander Matushevsky <matua@amazon.com>
Signed-off-by: Jan Medala <jan@semihalf.com>
Memory zones should be freed using the proper memzone_free function not
rte_free which is for malloc calls.
After allocating memzone it's required to zeroize memory in it, so do so
before storing the handle for later freeing.
Fixes: 9ba7981ec9 ("ena: add communication layer for DPDK")
Signed-off-by: Alexander Matushevsky <matua@amazon.com>
Signed-off-by: Jakub Palider <jpa@semihalf.com>
Signed-off-by: Jan Medala <jan@semihalf.com>
While allocating (coherent) memory, get information about calling node Id
and pass that as parameter when reserving a memzone.
Signed-off-by: Alexander Matushevsky <matua@amazon.com>
Signed-off-by: Jakub Palider <jpa@semihalf.com>
Signed-off-by: Jan Medala <jan@semihalf.com>
Depending on HW revision readless communcation between host and device
may be unavailable. In that case prevent PMD from setting up readless
communication mechanism.
"readless" refers to ability to read ENA registers without actually
issuing read request from host (x86). Instead, host programs 2 registers
on the device that triggers a DMA from device to host and reports a
register value. However, this functionality is not going to be available
in all types of devices. The decision if this mode is supported or not,
is taken from revision_id in pci configuration space.
Signed-off-by: Alexander Matushevsky <matua@amazon.com>
Signed-off-by: Jakub Palider <jpa@semihalf.com>
Signed-off-by: Jan Medala <jan@semihalf.com>
Increase maintenance and debug potentiality with dedicated areas of memory
where additional information can be stored by the ENA device.
Signed-off-by: Alexander Matushevsky <matua@amazon.com>
Signed-off-by: Jakub Palider <jpa@semihalf.com>
Signed-off-by: Jan Medala <jan@semihalf.com>
Synchronize ENA communication layer with latest ENA FW version.
Signed-off-by: Alexander Matushevsky <matua@amazon.com>
Signed-off-by: Jakub Palider <jpa@semihalf.com>
Signed-off-by: Jan Medala <jan@semihalf.com>
Since now the PMD_REGISTER_DRIVER macro sets the driver names,
there is no need to have the rte_driver structure setting it
statically, as it will get overridden.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Modify the PMD_REGISTER_DRIVER macro, adding a name argument to it. The
addition of a name argument creates a token that can be used for subsequent
macros in the creation of unique symbol names to export additional bits of
information for use by the pmdinfogen tool. For example:
PMD_REGISTER_DRIVER(ena_driver, ena);
registers the ena_driver struct as it always did, and creates a symbol
const char this_pmd_name0[] __attribute__((used)) = "ena";
which pmdinfogen can search for and extract. The subsequent macro
DRIVER_REGISTER_PCI_TABLE(ena, ena_pci_id_map);
creates a symbol const char ena_pci_tbl_export[] __attribute__((used)) =
"ena_pci_id_map";
Which allows pmdinfogen to find the pci table of this driver
Using this pattern, we can export arbitrary bits of information.
pmdinfo uses this information to extract hardware support from an object
file and create a json string to make hardware support info discoverable
later.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Remy Horton <remy.horton@intel.com>
librte_malloc was long since merged into librte_eal, mop up the
leftover references to it from driver Makefiles.
Fixes: 2f9d47013e ("mem: move librte_malloc to eal/common")
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Applied with qede Makefile update too.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The macro RTE_VERIFY always checks a condition.
It is optimized with "unlikely" hint.
While this macro is well suited for test applications, it is preferred
in libraries and examples to enable such check in debug mode.
That's why the macro RTE_ASSERT is introduced to call RTE_VERIFY only
if built with debug logs enabled.
A lot of assert macros were duplicated and enabled with a specific flag.
Removing these #ifdef allows to test these code branches more easily
and avoid dead code pitfalls.
The ENA_ASSERT is kept (in debug mode only) because it has more
parameters to log.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Some statistics were deprecated since release 2.1 (49f386542a).
The last deprecated counter to be used was imcasts.
The VF loopback statistics are also removed as they are used only
in igb and duplicated in extended statistics.
The new counters should be added to extended statistics.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
With (ICC) 16.0.2 20160204, getting following warnings:
.../drivers/net/ena/base/ena_com.c(492): error #3656: variable
"flags" may be used before its value is set
ENA_SPINLOCK_LOCK(admin_queue->q_lock, flags);
.../drivers/net/ena/base/ena_com.c(1971): error #3656: variable
"mem_handle" may be used before its value is set
ENA_MEM_ALLOC_COHERENT(ena_dev->dmadev, len,
For both warnings the variable value is ignored, so there is no defect.
To comfort compiler warning, a initial value provided to variables.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
The link speed configuration is now done with bitmaps so 100G speed
requires only a new bit flag.
The actual link speed is a number so its size must be increased from
16-bit to 32-bit.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Tested-by: Matej Vido <vido@cesnet.cz>
The speed capabilities of a device can be retrieved with
rte_eth_dev_info_get().
The new field speed_capa is initialized in the drivers without
taking care of device characteristics in this patch.
When the capabilities of a driver are accurate, the table in
overview.rst must be filled.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
The speed numbers ETH_LINK_SPEED_ are renamed ETH_SPEED_NUM_.
The prefix ETH_LINK_SPEED_ is kept for AUTONEG and will be used
for bit flags in next patch.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
FreeBSD was not defined in ena_plat.h
ETIME is not defined in FreeBSD.
In file included from DPDK/drivers/net/ena/base/ena_com.h:37:0,
from DPDK/drivers/net/ena/ena_ethdev.h:39,
from DPDK/drivers/net/ena/ena_ethdev.c:41:
DPDK/drivers/net/ena/base/ena_plat.h:48:2: error: #error "Invalid platform"
Fixes: 99ecfbf845 ("ena: import communication layer")
Fixes: 9ba7981ec9 ("ena: add communication layer for DPDK")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Fix for multiple compilation errors for ICC:
error #188: enumerated type mixed with another type
error #592: variable "flags" is used before its value is set
Fixes: 99ecfbf845 ("ena: import communication layer")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
This is a PMD for the Amazon ethernet ENA (Elastic Network Adapters)
family.
The driver operates variety of ENA adapters through feature negotiation
with the adapter and upgradable commands set.
ENA driver handles PCI Physical and Virtual ENA functions.
Signed-off-by: Evgeny Schemeilin <evgenys@amazon.com>
Signed-off-by: Jan Medala <jan@semihalf.com>
Signed-off-by: Jakub Palider <jpa@semihalf.com>
Release Note addition:
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Implementation of platform specific code for ENA communication layer.
Signed-off-by: Evgeny Schemeilin <evgenys@amazon.com>
Signed-off-by: Jan Medala <jan@semihalf.com>
Signed-off-by: Jakub Palider <jpa@semihalf.com>
Low level common abstraction for ENA device communication.
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: Jan Medala <jan@semihalf.com>
Signed-off-by: Jakub Palider <jpa@semihalf.com>
