This patch moves the definition of 3 variables in testpmd.h
into the respective .c file. The idea behind this move is
to allow external applications to compile against testpmd
without throwing compilation errors related to multiple
definition of variables.
Also, an extern dcb_q_mapping in testpmd.h is removed
since it appears that this variable is not defined
elsewhere in the tree.
Signed-off-by: Georgios Katsikas <katsikas.gp@gmail.com>
Removed the hardcoded preconfigured Rx VLAN offload configuration
from testpmd and changed the Rx offload command line parameters from
disable to enable.
It has been decided by the Technical Board that testers who wish to
use these offloads will now have to explicitly write them in the
command-line when running testpmd.
The agreement is to keep two exceptions enabled by default in 18.02:
Rx CRC strip and Tx fast free.
Motivation:
Some PMDs such at the mlx4 may not implement all the offloads.
After the offload API rework assuming no offload is enabled by default,
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API") trying
to enable a not supported offload is clearly an error which will cause
configuration failing.
Considering that testpmd is an application to test the PMD, it should
not fail on a configuration which was not explicitly requested.
The behavior of this test application is then turned to an opt-in
model.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Using registration to all ports includes also the ports which should not
be used by the application.
It is nice to print each port event by testpmd but in case of RMV
event, testpmd tries to detach the port and this case is problematic
when the port should not be used by the application.
Check the port validation before detach API calling.
Fixes: 4fb82244b3 ("app/testpmd: extend event printing")
Signed-off-by: Matan Azrad <matan@mellanox.com>
If an invalid number of TX queues is configured from testpmd run-time
command like "port config all txq number" or from --txq in the command
to start testpmd, the global variable nb_txq is updated by this invalid
value without this patch. It may cause testpmd crash. This patch refuses
invalid txq setting and keeps its last correct value.
Fixes: ce8d561418 ("app/testpmd: add port configuration settings")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
If an invalid number of RX queues is configured from testpmd run-time
command like "port config all rxq number" or from --rxq in the command
to start testpmd, the global variable nb_rxq is updated by this invalid
value without this patch. It may cause testpmd crash. This patch refuses
invalid rxq setting and keeps its last correct value.
Fixes: ce8d561418 ("app/testpmd: add port configuration settings")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
There are new Ethernet device events - NEW and DESTROY, and new option
to register all ports by one call.
Adjust application to aforementioned changes.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Enable the DEV_TX_OFFLOAD_MBUF_FAST_FREE in case the underlying device
supports.
This is to preserve the previous offloads configuration made according
to the PMD defaults.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
On ethdev there is an API to configure VLAN offloads after the port
was started and without reconfiguration of the port or queues.
In the current design of the application, when the Rx offloads are
changed (through "port config all" CLI command) the port configuration
is overwritten, therefore the configuration made for the VLAN is lost.
This patch is to address the issue by a configuration of each port Rx
offloads separately instead of using the global Rx config. Such
adjustment is required due to the conversion of the application to the
new offloads API.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Since testpmd is now using the new Ethdev offloads API and there is
a way configure each of the tx offloads from CLI or command line,
there is no need for the txqflags configuration anymore.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch adds command line option to set hex value for the ports Tx
offloads flags.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Ethdev Tx offloads API has changed since:
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")
Convert the application to use the new API.
This patch mandates the port to be stopped when configure the Tx
offloads. This is because the PMD must be aware to the offloads changes
on the device and queue configuration.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch adds supports for checking if a single port is stopped.
currently there is a function to check only for all ports.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Ethdev Rx offloads API has changed since:
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
Convert the application to use the new API. The is no functionality
changes rather simple conversion of the flags.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Instead of using USERx logs, register a dynamic log type, as introduced in
commit c1b5fa94a4 ("eal: support dynamic log types").
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The memzone header is often included without good reason.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
When using "show port xstats all" command to show xstats, the output
is usually too long to obtain what you really want, especially when
multi-queue is enabled.
Added an option to set whether zero values should be displayed
or not for xstats. The "set xstats-hide-zero on|off" command enables
the user to decide if the zero values should be shown while
displaying xstats.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Signed-off-by: Elza Mathew <elza.mathew@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When number of DCB traffic class is 4, user priority should be
mapped to traffic class 0/1/2/3.
Fixes: cb60ede6e3 ("ethdev: rename DCB field in config structs")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This commit extends the testpmd application with new forwarding engine
that demonstrates the use of ethdev traffic management APIs and softnic
PMD for QoS traffic management.
In this mode, 5-level hierarchical tree of the QoS scheduler is built
with the help of ethdev TM APIs such as shaper profile add/delete,
shared shaper add/update, node add/delete, hierarchy commit, etc.
The hierarchical tree has following nodes; root node(x1, level 0),
subport node(x1, level 1), pipe node(x4096, level 2),
tc node(x16348, level 3), queue node(x65536, level 4).
During runtime, each received packet is first classified by mapping the
packet fields information to 5-tuples (HQoS subport, pipe, traffic class,
queue within traffic class, and color) and storing it in the packet mbuf
sched field. After classification, each packet is sent to softnic port
which prioritizes the transmission of the received packets, and
accordingly sends them on to the output interface.
To enable traffic management mode, following testpmd command is used;
$ ./testpmd -c c -n 4 --vdev
'net_softnic0,hard_name=0000:06:00.1,soft_tm=on' -- -i
--forward-mode=tm
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
In container, the process cannot be terminated by SIGINT/SIGTERM when
execute with 'stats-period' option.
Fixed by adding a flag to exit stats period loop after received either
SIGINT or SIGTERM.
Fixes: cfea1f3048 ("app/testpmd: print statistics periodically")
Cc: stable@dpdk.org
Signed-off-by: Phil Yang <phil.yang@arm.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
The corrupted code didn't check the port availability when
it was trying to set the forward port IDs array.
However, when it was counting the number of ports, the availability
was checked by RTE_ETH_FOREACH_DEV iterator.
Hence, even when ETH devices ports were not in ATTACHED state,
the testpmd tried to forward traffic by them and got segmentation
fault at queue access time.
For example:
When EAL command line parameters include two devices, the first
is failsafe with two sub devices and the second is any device,
testpmd gets two devices by the iterator and sets for forwarding
both, the failsafe device and the failsafe first sub device
(instead of the second sub device).
After the first failsafe sub device state was changed to DEFERRED,
testpmd tries to forward traffic through the deferred device
because it didn't check the port availability in setting time.
The fix uses the RTE_ETH_FOREACH_DEV iterator for the forward
port IDs default setting.
Fixes: cb894d99ec ("ethdev: add deferred intermediate device state")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds GSO support to the csum forwarding engine. Oversized
packets transmitted over a GSO-enabled port will undergo segmentation
(with the exception of packet-types unsupported by the GSO library).
GSO support is disabled by default.
GSO support may be toggled on a per-port basis, using the command:
"set port <port_id> gso on|off"
The maximum packet length (including the packet header and payload) for
GSO segments may be set with the command:
"set gso segsz <length>"
Show GSO configuration for a given port with the command:
"show port <port_id> gso"
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The GRO library provides two modes to reassemble packets. Currently, the
csum forwarding engine has supported to use the lightweight mode to
reassemble TCP/IPv4 packets. This patch introduces the heavyweight mode
for TCP/IPv4 GRO in the csum forwarding engine.
With the command "set port <port_id> gro on|off", users can enable
TCP/IPv4 GRO for a given port. With the command "set gro flush <cycles>",
users can determine when the GROed TCP/IPv4 packets are flushed from
reassembly tables. With the command "show port <port_id> gro", users can
display GRO configuration.
The GRO library doesn't re-calculate checksums for merged packets. If
users want the merged packets to have correct IP and TCP checksums,
please select HW IP checksum calculation and HW TCP checksum calculation
for the port which the merged packets are transmitted to.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Call the mlockall() function, to attempt to lock all of its process
memory into physical RAM, and preventing the kernel from paging any
of its memory to disk.
When using testpmd for performance testing, depending on the code path
taken, we see a couple of page faults in a row. These faults effect
the overall drop-rate of testpmd. On Linux the mlockall() call will
prefault all the pages of testpmd (and the DPDK libraries if linked
dynamically), even without LD_BIND_NOW.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.
Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.
release_17_11 and deprecation docs have been updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The testpmd was doing old BSD lint style casts of rte_memcpy
to (void). This is unnecessary.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
When PF is reset, a message will show it and all its
VF need to be reset.
User can run the command "port reset port_id"
to reset the VF port and to keep same port id without
any configuration. Then user can run "port stop port_id"
and "port start port_id" to reconfigure its forwarding
mode and parameters as previous ones.
To avoid crash, current forwarding should be stopped
before running "port reset port_id".
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
The lsc_interrupt flag is enabled by default, and when the --tx-first is
used as a command line parameter, the 32 packets can be sent out before
the link state is up, resulting in the loss of the packets, and no further
forwarding will take place.
E.g. ./build/app/testpmd -c f0 -- --tx-first --stats-period 1
When the --tx-first is used, the lsc_interrupt flag needs to be disabled,
ensuring the links are up before forwarding traffic. Therefore, during the
parameter checking at startup, if --tx-first is used, we now warn the user,
and set lsc_interrupt to 0.
Fixes: 99cabef088 ("app/testpmd: add parameter to start forwarding Tx first")
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The device state should be handled by the ethdev layer when possible.
Applications should not have to do it.
Not setting the state to UNUSED will make the port_id of the device
valid for all ethdev API functions, usually resulting in segfault.
Fixes: 284c908cc5 ("app/testpmd: request device removal interrupt")
Cc: stable@dpdk.org
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Tested-by: Shachar Beiser <shacharbe@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Providing this parameter requests flow API isolated mode on all ports at
initialization time. It ensures all traffic is received through the
configured flow rules only (see flow command).
Ports that do not support this mode are automatically discarded.
Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch enables TCP/IPv4 GRO library in csum forwarding engine.
By default, GRO is turned off. Users can use command "gro (on|off)
(port_id)" to enable or disable GRO for a given port. If a port is
enabled GRO, all TCP/IPv4 packets received from the port are performed
GRO. Besides, users can set max flow number and packets number per-flow
by command "gro set (max_flow_num) (max_item_num_per_flow) (port_id)".
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Remove the dependency of this subsystem upon bus specific device
representation.
Devargs only validates that a device declaration is correct and handled
by a bus. The device interpretation is done afterward within the bus.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Add parameter to print port statistics periodically
(disabled by default), if interactive mode is not enabled.
This is useful to allow the user to see port statistics
without having to get into the internal command line.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add parameter to start forwarding sending first
a burst of packets, which is useful when testing
a loopback connection.
This was already implemented as an internal command,
but adding it as a parameter is interesting, as it
allows the user to test a loopback connection without
entering in the internal command line.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This is changing the API of rte_eal_dev_detach().
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Change the rte_eth_dev_callback_process function to return int,
and add a void *ret_param parameter.
The new parameter is used by ixgbe and i40e instead of abusing
the user data of the callback.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
When ixgbe bypass is not explicitly disabled while ixgbe is disabled:
app/test-pmd/testpmd.c:304:27: error:
‘RTE_PMD_IXGBE_BYPASS_TMT_OFF’ undeclared here
The ixgbe bypass feature is meaningful only if ixgbe is enabled.
So we need to check both.
A best fix will be to enable bypass always and remove this option.
Fixes: e261265e42 ("ethdev: move bypass functions to ixgbe PMD")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Fixing typos across dpdk source code using codespell utility.
Skipped the ethdev driver's base code fixes to keep the base
code intact.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Move all bypass functions to ixgbe pmd and remove function
pointers from the eth_dev_ops struct.
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The test assumes the socket ids are contiguous. This
is not necessarily the case on all servers and may cause
mempool creation to fail.
Fixing it by detecting the list of valid socket ids and
use it for the mempool creation.
Fixes: 7acf894d07 ("app/testpmd: detect numa socket count")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add two parameters to testpmd:
--print-event <event name>
--mask-event <event name>
To enable or disable to printing of events. This display is configured
on a per-event basis. By default, all except VF_MBOX are displayed.
Fixes: 76ad4a2d82 ("app/testpmd: add generic event handler")
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Previous numa_support = 0 by default, it need to add --numa to testpmd
command line to enable numa, so port_numa and ring_numa were initialized
at function launch_args_parse(), now testpmd change numa_support = 1 as
default, so port_numa and ring_numa also need to initialize by default,
otherwise port->socket_id will be probed to wrong value.
Fixes: 999b2ee0fe ("app/testpmd: enable NUMA support by default")
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Disable latency stats gathering by default,
so there is not performance degradation if user
is not interested in them.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
