Add eventmode support to ipsec-secgw. With the aid of event helper
configure and use the eventmode capabilities.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add eventmode helper eh_conf_init and eh_conf_uninit
functions which purpose is to initialize and
uninitialize eventmode helper configuration.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add support for Rx and Tx internal ports. When internal ports are
available then a packet can be received from eth port and forwarded
to event queue by HW without any software intervention. The same
applies to Tx side where a packet sent to an event queue can by
forwarded by HW to eth port without any software intervention.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
In eventmode workers can be drafted differently according to the
capabilities of the underlying event device. The added functions will
receive an array of such workers and probe the eventmode properties to
choose the worker.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add routines to display the eventmode configuration and provide
an overview of the devices used.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add Tx adapter support. The event helper init routine will initialize
the Tx adapter according to the configuration. If Tx adapter config
is not present it will generate a default config.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add Rx adapter support. The event helper init routine will initialize
the Rx adapter according to the configuration. If Rx adapter config
is not present it will generate a default config. If there are enough
event queues available it will map eth ports and event queues 1:1
(one eth port will be connected to one event queue). Otherwise it
will map all eth ports to one event queue.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add event device port-lcore link and specify which event queues should
be connected to the event port. Generate a default config for event
port-lcore links if it is not specified in the configuration. This
routine will check the number of available ports and then create links
according to the number of cores available. This patch also adds a new
entry in the eventmode conf to denote that all queues are to be linked
with every port. This enables one core to receive packets from all
ethernet ports.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add framework for eventmode helper. Event mode involves
initialization of multiple devices like eventdev, ethdev
and etc. Add routines to initialize and uninitialize event
device. Generate a default config for event device if it
is not specified in the configuration. Currently event
helper supports single event device only.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The default flow created would enable security processing on all ESP
packets. If the default flow is created, SA based rte_flow creation
would be skipped.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Change format for uint64_t to %"PRIu64" to make compiler happy.
Fixes: 103809d032 ("app/test-fib: add test application for FIB")
Cc: stable@dpdk.org
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Compiler can throw warning message for routes and lookup files.
Fixes: 103809d032 ("app/test-fib: add test application for FIB")
Cc: stable@dpdk.org
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
This patch allows C++ programs to use librte_fib library routines.
Previously C++ programs were not able to link this library and programs
would fail to get linked. With this patch compilation and linking
will be successful.
Fixes: 39e9272484 ("fib: add FIB library")
Fixes: 40d41a8a7b ("fib: support IPv6")
Cc: stable@dpdk.org
Signed-off-by: Asim Jamshed <asim.jamshed@gmail.com>
Signed-off-by: Saikrishna Edupuganti <saikrishna.edupuganti@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
libjansson4 is not enough to build telemetry. Replace it with
libjansson-dev.
Fixes: 99889bd852 ("ci: introduce Travis builds for GitHub repositories")
Cc: stable@dpdk.org
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
Acked-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
None of the public functions modify IPv6 address passed. So their
parameters are made const - with the exception of bulk functions.
This exception is due to compatibility problems - some compilers report
problems with const-casting of array of arrays.
Previously only lookup and add were updated to have addresses passed as
const so I'm adding this fixline.
Fixes: d82927d2f8 ("lpm6: make IPv6 address immutable")
Cc: stable@dpdk.org
Signed-off-by: Andrzej Ostruszka <aostruszka@marvell.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Clean up indent and line ordering in Makefile and meson.build
for consistency in linux/ and freebsd/ directories.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Since the kernel modules are moved to kernel/ directory,
there is no need anymore for the sub-directory eal/ in
linux/, freebsd/ and windows/.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
The EAL API (with doxygen documentation) is moved from
common/include/ to include/, which makes more clear that
it is the global API for all environments and architectures.
Note that the arch-specific and OS-specific include files are not
in this global include directory, but include/generic/ should
cover the doxygen documentation for them.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
The variable common_sources allows to change the list of common files
from an arch-specific or OS-specific meson file.
For consistency and least surprise principle, this variable is removed.
Now the list of common sources is defined only in common/meson.build.
As a consequence, the temporary list of files which are currently supported
on Windows, is moved from windows/eal/meson.build.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
The arch-specific directories arm, ppc and x86 in common/include/arch/
are moved as include/ sub-directories of respective arch directories:
- arm/include/
- ppc/include/
- x86/include/
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The arch-specific directories arm, ppc and x86 in common/arch/
are moved at the same level as the OS-specific directories.
It makes more clear that EAL is covering a matrix combining OS and arch.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The directories ppc_64 are renamed as ppc in
- config/
- lib/librte_eal/common/arch/
- lib/librte_eal/common/include/arch/
The EAL directories are not really renamed, but symbolically linked,
because they will be moved with their new name in the next commits.
If ppc_32 needs to be supported, it can be in the same directory.
The arch directories arm and x86 are already covering both 32 and 64-bit
sub-architectures.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@redhat.com>
When moving files to the directory kernel/,
the file BSDmakefile.meson was left in eal/.
Also the intermediate makefiles in linux/ and freebsd/ became useless.
Fixes: acaa9ee991 ("move kernel modules directories")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Introduction of pinned external buffers doubled memory loads in the
rte_pktmbuf_prefree_seg() function. Analysis of the generated assembly
code shows unnecessary load of the pool field of the rte_mbuf structure.
Here is the snippet of the assembly for "if (!RTE_MBUF_DIRECT(m))":
Before the change the code was:
movq 0x18(%rbx), %rax // load the ol_flags field
test %r13, %rax // check if ol_flags equals to 0x60...0
jz 0x9a8718 <Block 2> // jump out to "if (m->next != NULL)"
After the change the code became:
movq 0x18(%rbx), %rax // load ol_flags
test %r14, %rax // check if ol_flags equals to 0x60...0
jnz 0x9bea38 <Block 2> // jump in to "if (!RTE_MBUF_HAS_EXTBUF(m)"
movq 0x48(%rbx), %rax // load the pool field
jmp 0x9bea78 <Block 7> // jump out to "if (m->next != NULL)"
Look like this absolutely unneeded memory load of the pool field is an
optimization for the external buffer case in GCC (4.8.5), since Clang
generates the same assembly for both before and after the change versions.
Plus, GCC favors the external buffer case over the simple case.
This assembly code layout causes the performance degradation because the
rte_pktmbuf_prefree_seg() function is a part of a very hot path.
Workaround this compilation issue by moving the check for pinned buffer
apart from the check for external buffer and restore the initial code
flow that favors the direct mbuf case over the external one.
Fixes: 6ef1107ad4 ("mbuf: detach mbuf with pinned external buffer")
Cc: stable@dpdk.org
Signed-off-by: Alexander Kozyrev <akozyrev@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
As per the comments in this code section, since there is a matching device,
it is now its responsibility to manage the devargs we've just inserted.
But the matching device ptr's devargs is still uninitialized or not pointing
to the newest dev_args that were passed as a parameter to local_dev_probe().
This is needed particularly in the case when *probe is called again* on an
already probed device as part of adding a representor port to OVS-DPDK.
Fixes: 7e8b266501 ("eal: fix hotplug add / remove")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Gaetan Rivet <grive@u256.net>
When the input string is "key=[", the ending '\0' is replaced
by a ',', leading to a heap buffer overflow.
Check the content of ctx1 to avoid this problem.
Fixes: cc0579f233 ("kvargs: support list value")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
The return was not properly placed, and only the first test case
was validated.
Fixes: e495f54355 ("kvargs: add test case in app/test")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Empty elements passed to the kvargs parser are silently
ignored. Examples of valid strings:
""
","
",,,,,,key=val,,,,"
Fix the unit tests to conform to this behavior.
Note: the test_invalid_kvargs() function is currently broken, which
explain why the tests were not failing. It is fixed in the next commit.
Fixes: e495f54355 ("kvargs: add test case in app/test")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
This is a helper function in case components would like to do more work
than just logging a message based on log level, like for example
collecting some stats if the log type is DEBUG etc..
A few existing relevant usage converted to this new API.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Andrzej Ostruszka <aostruszka@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
When --no-huge mode is used, the memory is currently allocated with
mmap(NULL, ...). This is fine in most cases, but can fail in cases
where DPDK is run on a machine with an IOMMU that is of more limited
address width than that of a VA, because we're not specifying the
address hint for mmap() call.
Fix it by preallocating VA space before mapping it.
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: David Marchand <david.marchand@redhat.com>
Tested-by: Jun W Zhou <junx.w.zhou@intel.com>
Currently, when we are creating DMA mappings for memory that's
either external or is backed by hugepages in IOVA as PA mode, we
assume that each page is necessarily discontiguous. This may not
actually be the case, especially for external memory, where the
user is able to create their own IOVA table and make it
contiguous. This is a problem because VFIO has a limited number
of DMA mappings, and it does not appear to concatenate them and
treats each mapping as separate, even when they cover adjacent
areas.
Fix this so that we always map contiguous memory in a single
chunk, as opposed to mapping each segment separately.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Ray Kinsella <ray.kinsella@intel.com>
The source callback list grows infinitely when more than alarm
is queued.
This fix recognizes that an alarm interrupt in FreeBSD should never
have more than one callback on its list, so if
rte_intr_callback_register() is called with an interrupt handle type
of RTE_INTR_HANDLE_ALARM, so if such an interrupt type already has a
non-empty list, then a new callback is not created, but the kevent
timer is restarted properly.
Fixes: 23150bd8d8 ("eal/bsd: add interrupt thread")
Cc: stable@dpdk.org
Signed-off-by: Mit Matelske <mit@pt.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
_cpuset TLS variable stores the CPU affinity of eal thread.
Populate the _cpuset TLS variable for control thread to
1) Make rte_thread_get_affinity() and eal_thread_dump_affinity
functional with control thread.
2) Quick access to cpu affinity.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Add Travis CI jobs to run unit tests on aarch64 platform.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Aaron Conole <aconole@redhat.com>
As fast-tests suite generated with only applicable cases included,
hugepage is not a mandatory to run the test.
Ignore the result of hugepage set up, so that validation in environment
without hugepage can proceed.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Aaron Conole <aconole@redhat.com>
In environments where hugepage are not available, such as
containers, many cases in fast-tests suite should also run
if no-huge EAL option is used.
Flag is appended to each case in fast-tests suite to indicate
whether it lives with no-huge mode.
With the flag, fast-tests suite can be generated based on
detected hugepage availability of building environment.
All cases will be valid if hugepage is available, whereas
only applicable cases will be added if environment has no
hugepage support.
Suggested-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
When running with '--no-huge' flag, tests failed with messages as:
ACL context creation with invalid NUMA should have failed!
fbk hash creation should have failed
test_table_pipeline: Check pipeline invalid params failed.
These cases test against invalid socket ID as input parameter, and
expect error return. But function calls return success because
invalid sock ID is overwritten to SOCKET_ID_ANY when in no-huge mode.
The tests against invalid socket ID are skipped in no-huge mode.
Fixes: 5640171c52 ("malloc: fix external heap allocation in no-huge mode")
Cc: stable@dpdk.org
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Yipeng Wang <yipeng1.wang@intel.com>
Concatenating to test_args if event_eth_tx_adapter_autotest is executed
makes all subsequent tests inherit from the drivers loading while this
is unneeded.
Fixes: 207b1c813f ("test: fix build without ring PMD")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Installing with ninja is quite verbose by default, hide ninja output under
TEST_MESON_BUILD_VERBOSE and TEST_MESON_BUILD_VERY_VERBOSE options.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Fix check symbol change script to detect new diff file when
it is in between "--- /dev/null" to "b/lib/...".
Current awk line expects line to start with "a/..."
which is not always true for all diffs.
As a result if in_map was '1' earlier, it will not be changed
to '0' and we get check patch errors which are not true.
Fixes: 4bec48184e ("devtools: add checks for ABI symbol addition")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Honnappa and Konstantin contributed actively to the ring library
and volunteered to replace myself as maintainers.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The 32-bit arm machine doesn't support unaligned memory access. It
will cause a bus error on aarch32 with the custom element size ring.
Thread 1 "test" received signal SIGBUS, Bus error.
__rte_ring_enqueue_elems_64 (n=1, obj_table=0xf5edfe41, prod_head=0, \
r=0xf5edfb80) at /build/dpdk/build/include/rte_ring_elem.h:177
177 ring[idx++] = obj[i++];
Fixes: cc4b218790 ("ring: support configurable element size")
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
If contigmem is not able to allocate all of the
requested buffers, it frees whatever buffers were
able to be allocated up until that point.
But the pointers are not set to NULL in that case.
After the load fails, the FreeBSD kernel will
immediately call the contigmem unload handler, which
tries to free the buffers again since the pointers
were not set to NULL.
It's not clear that we should just rely on the unload
handler getting called after load failure. So let's
keep the existing cleanup code in the load handler,
but explicitly set the pointers to NULL after freeing
them.
Fixes: 5f51eca224 ("contigmem: free allocated memory on error")
Cc: stable@dpdk.org
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
There is a non-optimal check if doorbell is needed present in the
mlx5_tx_handle_completion() function. Advancing a copy of the txq
consumer index and checking this copy with initial value causes
unnecessary memory loads and hurts the performance. It is better to
have a simple small boolean variable for this purpose. That allows
to eliminate all the excessive memory operations with the txq consumer
index and restore the performance of the tx completions.
Fixes: 1fd9af05e4 ("net/mlx5: update Tx error handling routine")
Cc: stable@dpdk.org
Signed-off-by: Alexander Kozyrev <akozyrev@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Previous fix added, at the end of functions
flow_dv_translate_item_ipv4() and flow_dv_translate_item_ipv6(), the
setting of cvlan_tag mask.
In the case of unspecified item (item->spec == null) these functions
return, and the new code section is not reached.
This patch moves the setting of cvlan_tag mask to be done before the
check of item->spec, to make sure it is always executed.
Fixes: 797329d6c4 ("net/mlx5: fix match on ethertype and CVLAN tag")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch makes IO memory allocation with socketid,
the txq or rxq descriptor and IO resource can be allocated with
socketid that passed by queue setup ops, which can improve
performance for cross-numa scene.
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
