When KNI is being used at runtime, output a warning message about its
deprecated status. This is part of the deprecation process for KNI
agreed by the DPDK technical board.[1]
[1] https://mails.dpdk.org/archives/dev/2022-June/243596.html
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
To ensure all users are aware of KNI's deprecated status at build time,
this library is marked as a deprecated library: the library is disabled
by default. It can be re-enabled by setting disabled_libs to the empty
string (or other string not including 'kni').
The dependent NIC driver, drivers/net/kni, is disabled accordingly as it
depends on the library.
NOTE: This is part of the deprecation process for KNI agreed by the DPDK
technical board.[1]
[1] https://mails.dpdk.org/archives/dev/2022-June/243596.html
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Add support for a list of deprecated libs to the lib/meson.build file.
This will be used to mark libraries that are planned to be removed from
DPDK. The first user of this will be KNI in a next patch.
Deprecated libraries should still be tested in the CI, so update our
build testing and CI scripts.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Callbacks for mempool events were registered in a process-shared tailq.
This was inherently incorrect because the same function
may be loaded to a different address in each process.
Make the tailq process-private.
Use the EAL tailq lock to reduce the number of different locks
this module operates.
Fixes: da2b9cb25e ("mempool: add event callbacks")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add API to allow uncore frequency adjustment.
Uncore is a term used by Intel to describe function
of a microprocessor that are closely connected
to the core to achieve high performance.
This is done through manipulating related uncore frequency control
sysfs entries to adjust the minimum and maximum uncore frequency values
and works on Linux for Intel hardware.
Signed-off-by: Tadhg Kearney <tadhg.kearney@intel.com>
Reviewed-by: David Hunt <david.hunt@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
This patch fixes the build failure by typecasting to match
_mm512_i32gather_epi64() definition.
Bugzilla ID: 1096
Fixes: db354bd2e1 ("member: add NitroSketch mode")
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Tested-by: Ali Alnubani <alialnu@nvidia.com>
If DPDK applications should be used with a minimal set of privileges,
using the msr kernel module on linux should not be necessary.
Since at least kernel 4.4 the rdmsr call to obtain the last non-turbo
boost frequency can be left out, if the sysfs interface is used.
Also RHEL 7 with recent kernel updates should include the sysfs interface
for this (I only looked this up for CentOS 7).
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Tested-by: David Hunt <david.hunt@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
The rte_pcapng_write_packets() function fails when we try to write more
packets than the IOV_MAX limit. writev() system call is limited by the
IOV_MAX limit. The iovcnt argument is valid if it is greater than 0 and
less than or equal to IOV_MAX as defined in <limits.h>.
To avoid this problem, we can check that all segments of the next
packet will fit into the iovec buffer, whose capacity will be limited
by the IOV_MAX limit. If not, we flush the current iovec buffer to the
file by calling writev() and, if successful, fit the current packet at
the beginning of the flushed iovec buffer.
Fixes: 8d23ce8f5e ("pcapng: add new library for writing pcapng files")
Cc: stable@dpdk.org
Signed-off-by: Mário Kuka <kuka@cesnet.cz>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Sketching algorithm provide high-fidelity approximate measurements and
appears as a promising alternative to traditional approaches such as
packet sampling.
NitroSketch [1] is a software sketching framework that optimizes
performance, provides accuracy guarantees, and supports a variety of
sketches.
This commit adds a new data structure called sketch into
membership library. This new data structure is an efficient
way to profile the traffic for heavy hitters. Also use min-heap
structure to maintain the top-k flow keys.
[1] Zaoxing Liu, Ran Ben-Basat, Gil Einziger, Yaron Kassner, Vladimir
Braverman, Roy Friedman, Vyas Sekar, "NitroSketch: Robust and General
Sketch-based Monitoring in Software Switches", in ACM SIGCOMM 2019.
https://dl.acm.org/doi/pdf/10.1145/3341302.3342076
Signed-off-by: Alan Liu <zaoxingliu@gmail.com>
Signed-off-by: Yipeng Wang <yipeng1.wang@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Tested-by: Yu Jiang <yux.jiang@intel.com>
Currently, Rx buffer split supports length based split. With Rx queue
offload RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT enabled and Rx packet segment
configured, PMD will be able to split the received packets into
multiple segments.
However, length based buffer split is not suitable for NICs that do split
based on protocol headers. Given an arbitrarily variable length in Rx
packet segment, it is almost impossible to pass a fixed protocol header to
driver. Besides, the existence of tunneling results in the composition of
a packet is various, which makes the situation even worse.
This patch extends current buffer split to support protocol header based
buffer split. A new proto_hdr field is introduced in the reserved field
of rte_eth_rxseg_split structure to specify protocol header. The proto_hdr
field defines the split position of packet, splitting will always happen
after the protocol header defined in the Rx packet segment. When Rx queue
offload RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT is enabled and corresponding
protocol header is configured, driver will split the ingress packets into
multiple segments.
Examples for proto_hdr field defines:
To split after ETH-IPV4-UDP, it should be defined as
proto_hdr = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4_EXT_UNKNOWN |
RTE_PTYPE_L4_UDP
For inner ETH-IPV4-UDP, it should be defined as
proto_hdr = RTE_PTYPE_TUNNEL_GRENAT | RTE_PTYPE_INNER_L2_ETHER |
RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN | RTE_PTYPE_INNER_L4_UDP
If the protocol header is repeated with the previously defined one,
the repeated part should be omitted. For example, split after ETH, ETH-IPV4
and ETH-IPV4-UDP, it should be defined as
proto_hdr0 = RTE_PTYPE_L2_ETHER
proto_hdr1 = RTE_PTYPE_L3_IPV4_EXT_UNKNOWN
proto_hdr2 = RTE_PTYPE_L4_UDP
If protocol header split can be supported by a PMD, the
rte_eth_buffer_split_get_supported_hdr_ptypes function can
be used to obtain a list of these protocol headers.
For example, let's suppose we configured the Rx queue with the
following segments:
seg0 - pool0, proto_hdr0=RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4,
off0=2B
seg1 - pool1, proto_hdr1=RTE_PTYPE_L4_UDP, off1=128B
seg2 - pool2, proto_hdr2=0, off1=0B
The packet consists of ETH_IPV4_UDP_PAYLOAD will be split like
following:
seg0 - ipv4 header @ RTE_PKTMBUF_HEADROOM + 2 in mbuf from pool0
seg1 - udp header @ 128 in mbuf from pool1
seg2 - payload @ 0 in mbuf from pool2
Now buffer split can be configured in two modes. User can choose length
or protocol header to configure buffer split according to NIC's
capability. For length based buffer split, the mp, length, offset field
in Rx packet segment should be configured, while the proto_hdr field
must be 0. For protocol header based buffer split, the mp, offset,
proto_hdr field in Rx packet segment should be configured, while the
length field must be 0.
Note: When protocol header split is enabled, NIC may receive packets
which do not match all the protocol headers within the Rx segments.
At this point, NIC will have two possible split behaviors according to
matching results, one is exact match, another is longest match.
The split result of NIC must belong to one of them.
The exact match means NIC only do split when the packets exactly match all
the protocol headers in the segments. Otherwise, the whole packet will be
put into the last valid mempool. The longest match means NIC will do split
until packets mismatch the protocol header in the segments. The rest will
be put into the last valid pool.
Pseudo-code for exact match:
FOR each seg in segs except last one
IF proto_hdr is not matched THEN
BREAK
END IF
END FOR
IF loop breaked THEN
put whole pkt in last seg
ELSE
put protocol header in each seg
put everything else in last seg
END IF
Pseudo-code for longest match:
FOR each seg in segs except last one
IF proto_hdr is matched THEN
put protocol header in seg
ELSE
BREAK
END IF
END FOR
put everything else in last seg
Signed-off-by: Yuan Wang <yuanx.wang@intel.com>
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Signed-off-by: Wenxuan Wu <wenxuanx.wu@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add a new ethdev API to retrieve supported protocol headers
of a PMD, which helps to configure protocol header based buffer split.
Signed-off-by: Yuan Wang <yuanx.wang@intel.com>
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Signed-off-by: Wenxuan Wu <wenxuanx.wu@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Exclude CRC fields, the minimum Ethernet packet
length is 60 bytes. When the actual packet length
is less than 60 bytes, padding is added to the tail.
When GRO is performed on a packet containing a padding
field, mbuf->pkt_len is the one that contains the
padding field, which leads to the error of thinking
of the padding field as the actual content of the packet.
We need to trim away this extra padding field during
GRO processing.
Fixes: 0d2cbe59b7 ("lib/gro: support TCP/IPv4")
Cc: stable@dpdk.org
Signed-off-by: Jun Qiu <jun.qiu@jaguarmicro.com>
Acked-by: Jiayu Hu <Jiayu.hu@intel.com>
Code clean up due to if-check not required
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Added parameters in rte_bbdev_queue_data to expose information
with regards to any queue related failure and warning
which cannot be supported in existing API.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Extended bbdev operations to support FFT based operations.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Added more options in the API to expose the number
of queues exposed and related priority.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Added device status information, so that the PMD can
expose information related to the underlying accelerator device status.
Minor order change in structure to fit into padding hole.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Mingshan Zhang <mingshan.zhang@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Updated the enum for rte_bbdev_op_type
to allow to keep ABI compatible for enum insertion
while adding padded maximum value for array need.
Removing RTE_BBDEV_OP_TYPE_COUNT and instead exposing
RTE_BBDEV_OP_TYPE_SIZE_MAX.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Allows application to query maximum number of mbuf segments that can
be chained together.
Signed-off-by: Gerry Gribbon <ggribbon@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Swapped position of mbuf next pointer and second dynamic field (dynfield2)
if the build is configured to disable IOVA as PA.
This is to move the mbuf next pointer to first cache line.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
If IOVA as PA is disabled during build, mbuf physical address field is
undefined. This space is used to add the second dynamic field.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
IOVA mode in DPDK is either PA or VA.
The new build option enable_iova_as_pa configures the mode to PA
at compile time.
By default, this option is enabled.
If the option is disabled, only drivers which support it are enabled.
Supported driver can set the flag pmd_supports_disable_iova_as_pa
in its build file.
mbuf structure holds the physical (PA) and virtual address (VA).
If IOVA as PA is disabled at compile time, PA field (buf_iova)
of mbuf is redundant as it is the same as VA
and is replaced by a dummy field.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Added APIs rte_mbuf_iova_set and rte_mbuf_iova_get to set and get the
physical address of an mbuf respectively. Updated applications and
library to use the same.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
A flush threshold for the mempool cache was introduced in DPDK version
1.3, but rte_mempool_do_generic_get() was not completely updated back
then, and some inefficiencies were introduced.
Fix the following in rte_mempool_do_generic_get():
1. The code that initially screens the cache request was not updated
with the change in DPDK version 1.3.
The initial screening compared the request length to the cache size,
which was correct before, but became irrelevant with the introduction of
the flush threshold. E.g. the cache can hold up to flushthresh objects,
which is more than its size, so some requests were not served from the
cache, even though they could be.
The initial screening has now been corrected to match the initial
screening in rte_mempool_do_generic_put(), which verifies that a cache
is present, and that the length of the request does not overflow the
memory allocated for the cache.
This bug caused a major performance degradation in scenarios where the
application burst length is the same as the cache size. In such cases,
the objects were not ever fetched from the mempool cache, regardless if
they could have been.
This scenario occurs e.g. if an application has configured a mempool
with a size matching the application's burst size.
2. The function is a helper for rte_mempool_generic_get(), so it must
behave according to the description of that function.
Specifically, objects must first be returned from the cache,
subsequently from the backend.
After the change in DPDK version 1.3, this was not the behavior when
the request was partially satisfied from the cache; instead, the objects
from the backend were returned ahead of the objects from the cache.
This bug degraded application performance on CPUs with a small L1 cache,
which benefit from having the hot objects first in the returned array.
(This is probably also the reason why the function returns the objects
in reverse order, which it still does.)
Now, all code paths first return objects from the cache, subsequently
from the backend.
The function was not behaving as described (by the function using it)
and expected by applications using it. This in itself is also a bug.
3. If the cache could not be backfilled, the function would attempt
to get all the requested objects from the backend (instead of only the
number of requested objects minus the objects available in the backend),
and the function would fail if that failed.
Now, the first part of the request is always satisfied from the cache,
and if the subsequent backfilling of the cache from the backend fails,
only the remaining requested objects are retrieved from the backend.
The function would fail despite there are enough objects in the cache
plus the common pool.
4. The code flow for satisfying the request from the cache was slightly
inefficient:
The likely code path where the objects are simply served from the cache
was treated as unlikely. Now it is treated as likely.
Signed-off-by: Morten Brørup <mb@smartsharesystems.com>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Morten Brørup <mb@smartsharesystems.com>
Some of the HW has support for choosing memory pools based on the
packet's size.
This is often useful for saving the memory where the application
can create a different pool to steer the specific size of the
packet, thus enabling more efficient usage of memory.
For example, let's say HW has a capability of three pools,
- pool-1 size is 2K
- pool-2 size is > 2K and < 4K
- pool-3 size is > 4K
Here,
pool-1 can accommodate packets with sizes < 2K
pool-2 can accommodate packets with sizes > 2K and < 4K
pool-3 can accommodate packets with sizes > 4K
With multiple mempool capability enabled in SW, an application may
create three pools of different sizes and send them to PMD. Allowing
PMD to program HW based on the packet lengths. So that packets with
less than 2K are received on pool-1, packets with lengths between 2K
and 4K are received on pool-2 and finally packets greater than 4K
are received on pool-3.
Signed-off-by: Hanumanth Pothula <hpothula@marvell.com>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Before this patch, implementation details and configuration of hairpin
queues were decided internally by the PMD. Applications had no control
over the configuration of Rx and Tx hairpin queues, despite number of
descriptors, explicit Tx flow mode and disabling automatic binding.
This patch addresses that by adding:
- Hairpin queue capabilities reported by PMDs.
- New configuration options for Rx and Tx hairpin queues.
Main goal of this patch is to allow applications to provide
configuration hints regarding placement of hairpin queues.
These hints specify whether buffers of hairpin queues should be placed
in host memory or in dedicated device memory. Different memory options
may have different performance characteristics and hairpin configuration
should be fine-tuned to the specific application and use case.
This patch introduces new hairpin queue configuration options through
rte_eth_hairpin_conf struct, allowing to tune Rx and Tx hairpin queues
memory configuration. Hairpin configuration is extended with the
following fields:
- use_locked_device_memory - If set, PMD will use specialized on-device
memory to store RX or TX hairpin queue data.
- use_rte_memory - If set, PMD will use DPDK-managed memory to store RX
or TX hairpin queue data.
- force_memory - If set, PMD will be forced to use provided memory
settings. If no appropriate resources are available, then device start
will fail. If unset and no resources are available, PMD will fallback
to using default type of resource for given queue.
If application chooses to use PMD default memory configuration, all of
these flags should remain unset.
Hairpin capabilities are also extended, to allow verification of support
of given hairpin memory configurations. Struct rte_eth_hairpin_cap is
extended with two additional fields of type rte_eth_hairpin_queue_cap:
- rx_cap - memory capabilities of hairpin RX queues.
- tx_cap - memory capabilities of hairpin TX queues.
Struct rte_eth_hairpin_queue_cap exposes whether given queue type
supports use_locked_device_memory and use_rte_memory flags.
Signed-off-by: Dariusz Sosnowski <dsosnowski@nvidia.com>
NIC HW controllers often come with congestion management support on
various HW objects such as Rx queue depth or mempool queue depth.
Also, it can support various modes of operation such as RED
(Random early discard), WRED etc on those HW objects.
Add a framework to express such modes(enum rte_cman_mode) and
introduce (enum rte_eth_cman_obj) to enumerate the different
objects where the modes can operate on.
Add RTE_CMAN_RED mode of operation and RTE_ETH_CMAN_OBJ_RX_QUEUE,
RTE_ETH_CMAN_OBJ_RX_QUEUE_MEMPOOL objects.
Introduce reserved fields in configuration structure
backed by rte_eth_cman_config_init() to add new configuration
parameters without ABI breakage.
Add rte_eth_cman_info_get() API to get the information such as
supported modes and objects.
Add rte_eth_cman_config_init(), rte_eth_cman_config_set() APIs
to configure congestion management on those object with associated mode.
Finally, add rte_eth_cman_config_get() API to retrieve the
applied configuration.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Sunil Kumar Kori <skori@marvell.com>
Added the ethdev Rx/Tx desc dump API which provides functions for query
descriptor from device. HW descriptor info differs in different NICs.
The information demonstrates I/O process which is important for debug.
As the information is different between NICs, the new API is introduced.
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
The relation between the isolated mode in ethdev flow API
and bifurcated driver behaviour was not clearly explained.
It is made clear in the how-to guide that isolated mode is required
for flow bifurcation to the kernel.
On the other side, the impact of the isolated mode on a bifurcated
driver is made more explicit.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Dariusz Sosnowski <dsosnowski@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
The dev->device.numa_node field is set by each bus driver for
every device it manages to indicate on which NUMA node this device lies.
When this information is unknown, the assigned value is not consistent
across the bus drivers.
Set the default value to SOCKET_ID_ANY (-1) by all bus drivers
when the NUMA information is unavailable. This change impacts
rte_eth_dev_socket_id() in the same manner.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Add rte_thread_equal() that tests if two rte_thread_id are equal.
Signed-off-by: Narcisa Vasile <navasile@linux.microsoft.com>
Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
The *rte_thread_create()* function can optionally receive an
rte_thread_attr_t object that will cause the thread to be created with
the affinity and priority described by the attributes object. If
no rte_thread_attr_t is passed (parameter is NULL), the default
affinity and priority are used.
On Windows, the function executed by a thread when the thread starts is
represented by a function pointer of type DWORD (*func) (void*).
On other platforms, the function pointer is a void* (*func) (void*).
Performing a cast between these two types of function pointers to
uniformize the API on all platforms may result in undefined behavior.
To fix this issue, a wrapper that respects the signature required by
CreateThread() has been created on Windows.
Signed-off-by: Narcisa Vasile <navasile@linux.microsoft.com>
Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Implement thread attributes for:
* thread affinity
* thread priority
Implement functions for managing thread attributes.
Priority is represented through an enum that allows for two levels:
* RTE_THREAD_PRIORITY_NORMAL
* RTE_THREAD_PRIORITY_REALTIME_CRITICAL
Affinity is described by the rte_cpuset_t type.
An rte_thread_attr_t object can be set to the default values
by calling rte_thread_attr_init().
Signed-off-by: Narcisa Vasile <navasile@linux.microsoft.com>
Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
The rate parameter modified to uint32_t, so that it can work
for more than 64 Gbps.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
As announced in the deprecation note, remove the Rx offload flag
'RTE_ETH_RX_OFFLOAD_HEADER_SPLIT' and 'split_hdr_size' field from
the structure 'rte_eth_rxmode'. Meanwhile, the place where the examples
and apps initialize the 'split_hdr_size' field, and where the drivers
check if the 'split_hdr_size' value is 0 are also removed.
User can still use `RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT` for per-queue packet
split offload, which is configured by 'rte_eth_rxseg_split'.
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
In some cases application may receive a packet that should have been
received by the kernel. In this case application uses KNI or other means
to transfer the packet to the kernel.
With bifurcated driver we can have a rule to route packets matching
a pattern (example: IPv4 packets) to the DPDK application and the rest
of the traffic will be received by the kernel.
But if we want to receive most of the traffic in DPDK except specific
pattern (example: ICMP packets) that should be processed by the kernel,
then it's easier to re-route these packets with a single rule.
This commit introduces new rte_flow action which allows application to
re-route packets directly to the kernel without software involvement.
Add new testpmd rte_flow action 'send_to_kernel'. The application
may use this action to route the packet to the kernel while still
in the HW.
Example with testpmd command:
flow create 0 ingress priority 0 group 1 pattern eth type spec 0x0800
type mask 0xffff / end actions send_to_kernel / end
Signed-off-by: Michael Savisko <michaelsav@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
As part of DPDK 21.11 release, it was announced that the
use of attributes 'ingress' and 'egress' in 'transfer'
rules was deprecated. The transition period is over.
Starting from DPDK 22.11, the use of direction attributes
with attribute 'transfer' is not allowed. To enforce that,
a generic check is added to flow rule validate API.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
These actions are supported by no drivers.
The patch breaks ABI.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
The action is supported by no drivers.
The patch breaks ABI.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
The action is supported by no drivers.
The patch breaks ABI.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
The action is supported by no drivers.
The patch breaks ABI.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
Using rte_mtr_color_in_protocol_set(), user can configure
combination of protocol headers, like outer_vlan and outer_ip,
can be enabled on given meter object.
But rte_mtr_meter_vlan_table_update() and
rte_mtr_meter_dscp_table_update() do not have information that
which table needs to be updated corresponding to protocol header
i.e. inner or outer.
Adding protocol paramreter will allow user to provide required
protocol information so that corresponding inner or outer table
can be updated corresponding to protocol header.
If user wishes to configure both inner and outer table then
API must be called twice with correct protocol information.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Create a new Flow API action: METER_MARK.
It Meters a packet stream and marks its packets with colors.
The marking is done on a metadata, not on a packet field.
Unlike the METER action, it performs no policing at all.
A user has the flexibility to create any policies with the help of
the METER_COLOR item later, only meter profile is mandatory here.
Add testpmd command line to match for METER_MARK action:
flow create ... actions meter_mark mtr_profile 20 / end
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Introduce a new Meter API to retrieve a Meter profile and policy
objects using the profile/policy ID previously created with
meter_profile_add() and meter_policy_create() functions.
That allows to save the pointer and avoid any lookups in the
corresponding lists for quick access during a flow rule creation.
Also, it eliminates the need for CIR, CBS and EBS calculations
and conversion to a PMD-specific format when the profile is used.
Pointers are destroyed and cannot be used after the corresponding
meter_profile_delete() or meter_policy_delete() are called.
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Extend modify_field Flow API with support of Meter Color Marker
modifications. It allows setting the packet's metadata to any
color marker: green, yellow or red. A user is able to specify
an initial packet color for Meter API or create simple Metering
and Marking flow rules based on his own coloring algorithm.
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Provide an ability to use a Color Marker set by a Meter
as a matching item in Flow API. The Color Marker reflects
the metering result by setting the metadata for a
packet to a particular codepoint: green, yellow or red.
Add testpmd command line to match on a meter color:
flow create 0 ingress group 0 pattern meter color is green / end
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add all necessary elements for DPDK to compile and run EAL on
LoongArch64 Soc.
This includes:
- EAL library implementation for LoongArch ISA.
- meson build structure for 'loongarch' architecture.
RTE_ARCH_LOONGARCH define is added for architecture identification.
- xmm_t structure operation stubs as there is no vector support in
the current version for LoongArch.
Compilation was tested on Debian and CentOS using loongarch64
cross-compile toolchain from x86 build hosts. Functions were tested
on Loongnix and Kylin which are two Linux distributions supported
LoongArch host based on Linux 4.19 maintained by Loongson
Corporation.
We also tested DPDK on LoongArch with some external applications,
including: Pktgen-DPDK, OVS, VPP.
The platform is currently marked as linux-only because there is no
other OS than Linux support LoongArch host currently.
The i40e PMD driver is disabled on LoongArch because of the absence
of vector support in the current version.
Similar to RISC-V, the compilation of following modules has been
disabled by this commit and will be re-enabled in later commits as
fixes are introduced:
net/ixgbe, net/memif, net/tap, example/l3fwd.
Signed-off-by: Min Zhou <zhoumin@loongson.cn>
Build fails if RTE_LOG_DP_LEVEL is set to RTE_LOG_DEBUG.
Fix the same by including the required header.
lib/rcu/rte_rcu_qsbr.h:678:40: error: expected ‘)’ before ‘PRIu64’
678 | "%s: status: least acked token = %" PRIu64,
| ^~~~~~
Fixes: 30a1de105a ("lib: remove unneeded header includes")
Cc: stable@dpdk.org
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
