The current_primary_port is initialised to an invalid value
during bonded device creation.
It must be set to a valid value later.
This fix sets it to a valid value when the first slave port
is added to the bonding device.
Fixes: 2efb58cbab ("bond: new link bonding library")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This structure has immutable function pointers.
Also fix indentation.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
If a bonded device is created when there are no slave devices
there is a loop in bond_ethdev_promiscuous_enable() which results
in a segmentation fault.
The solution is to initialise the current_primary_port to an
invalid port value when the bonded port is created.
Fixes: 2efb58cbab ("bond: new link bonding library")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The current code for detecting link during slave addition can cause a
slave interface to be activated twice -- once during slave_configure()
and again at the end of __eth_bond_slave_add_lock_free(). This will
either cause the active slave count to be incorrect or will cause the
802.3ad activation function to panic. Ensure that the interface is not
activated more than once.
Fixes: 46fb436836 ("bond: add mode 4")
Signed-off-by: Eric Kinzie <ekinzie@brocade.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Declan Doherty <declan.doherty@intel.com>
If the link state of a slave is "up" when added, it is added to the list
of active slaves but, even if it is the only slave, is not selected as
the primary interface. Generally, handling of link state interrupts
selects an interface to be primary, but only if the active count is zero.
This change avoids the situation where there are active slaves but
no primary.
Fixes: 2efb58cbab ("bond: new link bonding library")
Signed-off-by: Eric Kinzie <ekinzie@brocade.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Declan Doherty <declan.doherty@intel.com>
The bonding PMD in mode 4 puts all enslaved interfaces into promiscuous
mode in order to receive LACPDUs and must filter unwanted packets
after the traffic has been "collected". Allow broadcast and multicast
through so that ARP and IPv6 neighbor discovery continue to work.
Fixes: 46fb436836 ("bond: add mode 4")
Signed-off-by: Eric Kinzie <ekinzie@brocade.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Copy all needed fields from the mode8023ad_private structure in
bond_mode_8023ad_conf_get(). This help ensure that a subsequent call
to rte_eth_bond_8023ad_setup() is not passed uninitialized data that
would result in either incorrect behavior or a failed sanity check.
Fixes: 46fb436836 ("bond: add mode 4")
Signed-off-by: Eric Kinzie <ekinzie@brocade.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Ensure that a bonded slave device is not detached,
until it is removed from the bonded device.
Fixes: 2efb58cbab ("bond: new link bonding library")
Fixes: a45b288ef2 ("bond: support link status polling")
Fixes: 494adb7f63 ("ethdev: add device fields from PCI layer")
Fixes: b1fb53a39d ("ethdev: remove some PCI specific handling")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Check that the bonded device has no slaves before detaching it.
Fixes: 8d30fe7fa7 ("bonding: support port hotplug")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
fix the error reported by checkpatch:
"ERROR: return is not a function, parentheses are not required"
remove parentheses in return like:
"return (logical expressions)"
remove parentheses in return a function like:
"return (rte_mempool_lookup(...))"
Fixes: 6307b909b8 ("lib: remove extra parenthesis after return")
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Fragmented IPv4 packets have no TCP/UDP headers, so we hashed
random data introducing reordering of the fragments.
Signed-off-by: Andriy Berestovskyy <aber@semihalf.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
The following messages might appear after some idle time:
"PMD: Failed to allocate LACP packet from pool"
The fix ensures the mempool size is greater than the sum
of TX descriptors.
Signed-off-by: Andriy Berestovskyy <aber@semihalf.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Parallel build of bonding driver can fail because of
missing dependency.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Declan Doherty <declan.doherty@intel.com>
These statistics are marked deprecated, leave them alone.
Also keep track of imissed across all ports.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
ICC complains about enumerated types being mixed in link bonding driver,
as ETH_MQ_RX_RSS is an enum type of mq_mode and not a bitmask as it was
being treated.
Fixes: 734ce47f71 ("bonding: support RSS dynamic configuration")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
In case of creating bond device without add any slaves and
quit from testpmd, application crashed since rx/tx queues
are NULL.
Add checking of this parameters before trying to free.
Signed-off-by: Raslsn Darawsheh <rdarawsheh@asaltech.com>
Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
remove pci_dev, pci_drv, rte_bond_pmd and pci_id_table.
handle numa_node for vdevs
handle RTE_ETH_DEV_INTR_LSC for vdevs
rename the function valid_bonded_device to check_for_bonded_device
remove branches on pci_dev
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Initialise dev_flags, driver, kdrv, drv_name and numa_node fields
in eth_dev data.
for the following vdevs:
null
ring
pcap
af_packet
xenvirt
mpipe
bonding
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch adds fills bonding port's stats with a sum of corresponding
values taken from bonded slaves, when stats are requested for bonding port.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Bonding device implements independent management of RSS settings. It
stores its own copies of settings i.e. RETA, RSS hash function and RSS
key. It’s required to ensure consistency.
1) RSS hash function set for bonding device is maximal set of RSS hash
functions supported by all bonded devices. That mean, to have RSS support
for bonding, all slaves should be RSS-capable.
2) RSS key is propagated over the slaves "as is".
3) RETA for bonding is an internal table managed by bonding API, and is
used as a pattern to set up slaves. Its size is GCD of all RETA sizes, so
it can be easily used as a pattern providing expected behavior, even if
slaves RETA sizes are different.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
If the name parameter to rte_eth_bond_create() was NULL,
there was a segmentation fault because eth_dev was also NULL.
Add error handling of mac_addrs memory allocation.
Add call to rte_eth_dev_release_port() in error handling.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Tested-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
On slave activation in LACP (8023AD) SOCKET_ANY_ID (which is -1)
is being casted to unsigned char and then to signed int.
The result is that socket_id has value of 255, not -1.
This results to memory allocation failure.
Fixes: 46fb436836 ("bond: add mode 4")
Signed-off-by: Sergey Balabanov <balabanovsv@ecotelecom.ru>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch depends on the Port Hotplug Framework.
It implements the rte_dev_uninit_t() function for the link bonding pmd.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Cleanup the code in bonding that checks ports.
* Use standard rte_eth_dev_is_valid_port
* Change name of driver string to avoid variable namespace conflicts
* Get rid of unnecessary string comparison stuff. A simple pointer
check is enough here.
* Get rid of unnecessary assignment of driver_name, it is already
done by common code.
* Don't generate unnecessary log messages on error.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Move malloc inside eal and create a new section in MAINTAINERS file for
Memory Allocation in EAL.
Create a dummy malloc library to avoid breaking applications that have
librte_malloc in their DT_NEEDED entries.
This is the first step towards using malloc to allocate memory directly
from memsegs. Thus, memzones would allocate memory through malloc,
allowing to free memzones.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Add missing initialization of to pci_dev driver
The link from pci_dev back to the ethernet driver was not being set.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When stopping the bond device we don't need to try and free up the LACPDU's
from deactivated devices since this is covered by
bond_mode_8023ad_deactivate_slave().
This fixes the following:
[ 0.100569] PANIC in bond_ethdev_stop():
[ 0.100589] line 1172 assert "port->rx_ring != NULL" failed
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Declan Doherty <declan.doherty@intel.com>
On Fortville NIC, link status change interrupt callback is not executed when
slave in bonding is (re-)started. It causes that slave's NIC is inactive even
if its link status is up on the start.
This patch invokes lsc callback, just after port's start, to check its initial
link status and manage properly.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
On machines that are strict on pointer alignment, current code breaks
on GCC's -Wcast-align checks on casts from narrower to wider types.
This patch introduces new unaligned_uint(16|32|64)_t types, which
correctly retain alignment in such cases. Strict alignment
architectures will need to define CONFIG_RTE_ARCH_STRICT_ALIGN in
order to effect these new types.
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Remove 2 unneeded memset's. The info area is already cleared rte_eth_dev_info_get
and the statistics buffer is cleared by rte_eth_stats_get
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move bonded ethdev pmd to drivers/net
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
