The function bnxt_vnic_rss_configure_thor() returns early when
all receive queues are stopped without releasing the hwrm
spinlock, which causes subsequent HWRM operations to hang. Fix
by ensuring that the lock is released before returning from
this function.
Fixes: 38412304b5 ("net/bnxt: enable RSS for thor-based controllers")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Receive queue state needs to reflect "started" state when rebuilding
the RSS table for Thor-based NICs. Move state update so that receive
queues being started are included in the RSS table.
Fixes: 38412304b5 ("net/bnxt: enable RSS for thor-based controllers")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
A previous commit made updating of the RSS table when a receive
queue is stopped/started conditional on vnic->rx_queue_cnt being
nonzero. This count is only nonzero for dynamically created VNICs,
so the RSS table was not being updated in the normal path.
Fix by restoring the original logic.
Also ensure that vnic->rx_queue_cnt is initialized to zero when
reinitializing the VNIC array.
Fixes: 36024b2e7f ("net/bnxt: allow dynamic creation of VNIC")
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
While issuing hwrm_queue_qportcfg command, we are setting the
drv_qmap_cap bit which is causing the firmware to return incorrect COS
queue mapping.
This bit is not required when COS classification is enabled.
Fixes: 698aa7e953 ("net/bnxt: add code to determine the Tx COS queue")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
During initialization sequence in bnxt_alloc_mem()
if bnxt_alloc_async_cp_ring() fails, driver invokes bnxt_free_mem()
which in turn call bnxt_free_vnic_mem() which causes the error logs
"bnxt_free_vnic_mem(): VNIC is not freed yet!". This is because
vnic memory is allocated but not initialized yet.
Fix this by moving bnxt_init_vnics() from bnxt_init_nic() to
bnxt_alloc_vnic_mem(). Also get rid of bnxt_init_nic() as the
initialization is done in respective functions now.
Fixes: 1bf01f5135 ("net/bnxt: prevent device access when device is in reset")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
bnxt_init_chip called on port start keeps incrementing rx_cosq_cnt.
Hence more vnics are allocated with less number of rings on each port
stop/start operation. Eventually vnic allocation fails due to incorrect
ring group as no ring gets allocated to the vnic.
Fixes: 84d49664b5 ("net/bnxt: support CoS classification")
Signed-off-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
filter->mac_index is used to check, if a same mac is
already programmed. Hence, filter->dflt member is not
needed which is also used for mac addr redundancy check.
This patch fixes it by moving mac_index based redundant
check from bnxt_mac_addr_add_op to bnxt_add_mac_filter
Fixes: 6118503d80 ("net/bnxt: fix VLAN filtering")
Cc: stable@dpdk.org
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Update "mbuf->ol_flags" correctly for inner and ourter ip checksum
errors in case of tunnel and non-tunnel packets.
Fixes: 65ee636872 ("net/bnxt: fix Rx checksum flags")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Creating a flow is a normal event; should not be logged at error level.
Fixes: 5c1171c972 ("net/bnxt: refactor filter/flow")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Rdma-core needs the dst_vport (port_id) action be after push/pop VLAN
and modify hdr actions otherwise it will reject to create rule.
This pach validates the port_id is after push/pop VLAN and set VLAN
VID/PCP otherwise PMD spits out errors.
Fixes: 5f163d520c ("net/mlx5: support modify VLAN ID on existing VLAN header")
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Currently if user want to set VLAN id/pcp on an about to be pushed VLAN
header, the of_set_vlan_vid/of_set_vlan_pcp must be present _before_
action of_push_vlan:
[1] ... actions of_set_vlan_vid vlan_vid 2 / of_push_vlan ...
This is misleading because people think rule [1] intends to set VLAN id
on the existing VLAN header and then push one new VLAN header on top of
it.
A more natual way to set VLAN id/pcp on an to be pushed VLAN header
should be:
[2] ... actions of_push_vlan / of_set_vlan_vid vlan_vid 2 / ...
Fixes: a5f2da0b81 ("net/mlx5: support modify VLAN ID on new VLAN header")
Fixes: 68fad36350 ("net/mlx5: support modifying VLAN priority on VLAN header")
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
DRV_LOG macro is used to print log messages, one per line.
In several locations this macro is used with redundant '\n' character
at the end of the log message, causing blank lines between log lines.
This patch removes the '\n' character where it is redundant.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Max frame size is not set to HW, so packets above the MTU
do not get dropped by HW. The patch fixed the issue.
Fixes: 50370662b7 ("net/ice: support device and queue ops")
Cc: stable@dpdk.org
Signed-off-by: Jiaqi Min <jiaqix.min@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
The link status for 82599eb got from link status register was not
correct, check the enable/disable flag of tx laser when getting the link
status, set the link status down if tx laser disabled since the tx laser
flag could be set correctly when up/down the link status.
Fixes: dc66e5fd01 ("net/ixgbe: improve link state check on VF")
Cc: stable@dpdk.org
Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
FreeBSD OS doesn't support igb_uio interrupt, so it will fail when
unregister the interrupt callback in port close. We can fix the issue by
passing -ENOENT when check the return value of unregister interrupt
callback function.
Fixes: f2f4990eff ("net/ixgbe: release port upon close")
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Qinq strip is not supported by i40e. When user tries to turn on
QinQ strip, the driver gives unsupported return value and log.
Signed-off-by: Tao Zhu <taox.zhu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
When a new hash profile is created, we need to reset all related
GLQF_HSYMM registers, otherwise unexpected hash behaviour may happen
on packet that hits that profile.
The patch fixes the issue that we only do reset when symmetric hash
is required, but actually for non symmetric hash we also need this,
since GLQF_HSYMM might be polluted by previous configuration.
Fixes: ddae044035 ("net/ice/base: enable symmetric hash for RSS")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Simei Su <simei.su@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
MACsec setting is not valid when port is stopped.
In order to make it valid, the patch changes the setting
to where port is started.
Fixes: 597f9fafe1 ("app/testpmd: convert to new Tx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
The current code doesn't support L4 matching, it only supports L3
matching so remove the code for inner L4.
Fixes: efc16c6214 ("net/ice: support flow director GTPU tunnel")
Signed-off-by: Yahui Cao <yahui.cao@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Fixes: ed838a5fe9 ("net/ixgbe: use intrinsics to count packet in NEON Rx")
Cc: stable@dpdk.org
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Ptype parse is missing in aarch64 vector PMD. It makes packet type info
provided by NIC get lost, thus requires extra CPU cycles to do this.
Add the parse process to utilize NIC hardware capability.
In test with l3fwd (removed port conf DEV_RX_OFFLOAD_CHECKSUM),
observed over 3% performance gain.
Fixes: b20971b6cc ("net/ixgbe: implement vector driver for ARM")
Cc: stable@dpdk.org
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch removes deprecated feature 'Flow Director' from hns3.ini
and hns3_vf.ini because the feature has been removed from the
feature list in the following commit:
Commit 030febb664 ("doc: remove deprecated ethdev features")
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
A tag is a transient data which can be used during flow match. This can be
used to store match result from a previous table so that the same pattern
need not be matched again on the next table. Even if outer header is
decapsulated on the previous match, the match result can be kept.
Some device expose internal registers of its flow processing pipeline and
those registers are quite useful for stateful connection tracking as it
keeps status of flow matching. Multiple tags are supported by specifying
index.
Example testpmd commands are:
flow create 0 ingress pattern ... / end
actions set_tag index 2 value 0xaa00bb mask 0xffff00ff /
set_tag index 3 value 0x123456 mask 0xffffff /
vxlan_decap / jump group 1 / end
flow create 0 ingress pattern ... / end
actions set_tag index 2 value 0xcc00 mask 0xff00 /
set_tag index 3 value 0x123456 mask 0xffffff /
vxlan_decap / jump group 1 / end
flow create 0 ingress group 1
pattern tag index is 2 value spec 0xaa00bb value mask 0xffff00ff /
eth ... / end
actions ... jump group 2 / end
flow create 0 ingress group 1
pattern tag index is 2 value spec 0xcc00 value mask 0xff00 /
tag index is 3 value spec 0x123456 value mask 0xffffff /
eth ... / end
actions ... / end
flow create 0 ingress group 2
pattern tag index is 3 value spec 0x123456 value mask 0xffffff /
eth ... / end
actions ... / end
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
The function rte_eth_dev_count() was marked as deprecated in DPDK 18.05
in commit d9a42a69fe ("ethdev: deprecate port count function").
It was planned to be removed after 19.11 LTS release,
but given we must not break ABI between 19.11 and 20.11,
it is removed now.
Note the ABI version is not dumped in this commit
because other changes already did.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Since the encap action is not supported in RX, we need to split the
hairpin flow into RX and TX.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
When using hairpin all traffic from TX hairpin queues should jump
to dedecated table where matching can be done using regesters.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
When splitting flows for example in hairpin / metering, there is a need
to combine the flows. This is done using ID.
This commit introduce a simple way to generate such IDs.
The reason why bitmap was not used is due to fact that the release and
allocation are O(n) while in the chosen approch the allocation and
release are O(1)
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This commit introduce the setting and matching on registers.
This item and and action will be used with number of different
features like hairpin, metering, metadata.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
When starting the port, in addition to creating the queues
we need to bind the hairpin queues.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This commits adds the hairpin get capabilities function.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This commit adds the support for creating Tx hairpin queues.
Hairpin queue is a queue that is created using DevX and only used
by the HW.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Currently all Tx queues are created using Verbs.
This commit modify the naming so it will not include verbs,
since in next commit a new type will be introduce (hairpin)
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This commit adds the support for creating Rx hairpin queues.
Hairpin queue is a queue that is created using DevX and only used
by the HW. This results in that all the data part of the RQ is not being
used.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This commit query and store the hairpin capabilities from the device.
Those capabilities will be used when creating the hairpin queue.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This commit introduce hairpin queue type.
The hairpin queue in build from Rx queue binded to Tx queue.
It is used to offload traffic coming from the wire and redirect it back
to the wire.
There are 3 new functions:
- rte_eth_dev_hairpin_capability_get
- rte_eth_rx_hairpin_queue_setup
- rte_eth_tx_hairpin_queue_setup
In order to use the queue, there is a need to create rte_flow
with queue / RSS action that targets one or more of the Rx queues.
Signed-off-by: Ori Kam <orika@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
The queue state defines are internal to the DPDK.
This commit moves them to a private header file.
Signed-off-by: Ori Kam <orika@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Adding support to parse higig2 header in RTE flow for octeontx2.
And added devargs to configure port for higig2.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adding support to configure specific switch types like high2 and dsa
on a port. When this switch type is configured, it is expected that
all the traffic on that port should be of specific type only.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
LBK interface does not support any flow control related
HW configurations.
Skip flow control set requests on LBK bound ethports.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
VF index needs to be checked against maxvf count
before incrementing it for preparing pf_func.
Fixes: 520270d518 ("net/octeontx2: support PF and VF action")
Cc: stable@dpdk.org
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
New MTU value is not propagated to vport in HW when MTU update request
is sent while ports are stopped.
This patch fixes the logic error for above mentioned condition.
Fixes: d121a6b5f7 ("net/qede: fix VF MTU update")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Reviewed-by: Rasesh Mody <rmody@marvell.com>
In our testing we have identified a critical FW bug. Performance
is degraded significantly for certain packet sizes with 8.40.25.0 FW.
This patch updates the FW to version 8.40.33.0. The updated FW has a
fix to performance issue.
The patch also adds initialization for FW overlay RAM as part of
hardware initialization which is required by the new FW.
Fixes: 3b307c55f2 ("net/qede/base: update FW to 8.40.25.0")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Add checking of l4_csum_checked and frag flags before checking the
l4_csum_error flag.
In case of IP fragment/unchecked L4 csum - add PKT_RX_L4_CKSUM_UNKNOWN
flag to the indicated mbuf.
Fixes: 1173fca25a ("ena: add polling-mode driver")
Cc: stable@dpdk.org
Signed-off-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Maciej Bielski <mba@semihalf.com>
Reviewed-by: Michal Krawczyk <mk@semihalf.com>
Flow director rule can't be created when the flow table is nearly full.
The patch fixed this issue to enable created flows reaching the maximum
number.
Fixes: 1a2fc1799f ("net/ice: reject duplicated flow for flow director")
Signed-off-by: Ying A Wang <ying.a.wang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
This patch corrects key_len and queues check. The key_len and queues
are not supported to configure for RSS in rte_flow.
Fixes: 5ad3db8d4b ("net/ice: enable advanced RSS")
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
A new gtp flow's profile will capture other profile's non-gtp ptypes
which is unexpected. For example, a RSS flow for inner IP / UDP on
regular tunnel packet's behaviour will be changed by a following GTP RSS
rule where inner IP is the only inputset, since all tunnel ptypes have
been shifted from the first profile to the second one.
The patch fixes the issue by correcting the ptype mapping that prevents
the ptype shift.
Fixes: d1c2f76b44 ("net/ice/base: support GTP and PPPoE protocols")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Simei Su <simei.su@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
This patch corrects logic error for checking rss->types to match
pattern in RSS action parser.
Fixes: 5ad3db8d4b ("net/ice: enable advanced RSS")
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
