This patch addresses the following issues with Tx batching:
1. Tx stall observed in some conditions:
The batching code doesn't request for a completion when only a partial
chain of packets is transmitted due to mbuf allocation errors. Because
of this, Tx consumer index is not updated correctly and it eventually
leads to qfull condition. Fix this by requesting a completion for the
last packet in the partial chain that is transmitted successfully.
2. Tx stall seen with Jumbo frames:
With jumbo frames, number of TxBDs is > 1. While setting up these
additional BDs in bnxt_start_xmit(), the flags field is being set using
the OR-assignment operator. We end up using a stale value of the flags
field (from a previous use of that descriptor). This results in an
invalid completion and eventually leads to tx stall. Fix this to just
assign the flags field with the right value.
Fixes: 5735eb2419 ("net/bnxt: support Tx batching")
Cc: stable@dpdk.org
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The HW can have limits on the minimum packet size it can support,
or the maximum number of segments it can support. Check for such
possibilities. Also check if we are going to have a 0 length buffer.
Fixes: 6eb3cc2294 ("net/bnxt: add initial Tx code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
We wrongly update lflags in the Tx descriptor; avoid it.
Also, instead of calculating the last producer index to see if mbuf
segments are chained, check if the pointer is NULL to iterate through
the segment list.
Fixes: 6eb3cc2294 ("net/bnxt: add initial Tx code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
In function mlx5_rxq_ibv_new(), pointer *tmpl allocation is attempted
at the start, but not validated or freed in case of error.
In function mlx5_txq_ibv_new(), pointer *txq_ibv allocation is
attempted at the start, but not freed in case of error.
This patch adds pointers initialization, validation and freeing.
Fixes: 09cb5b5817 ("net/mlx5: separate DPDK from verbs Rx queue objects")
Fixes: faf2667fe8 ("net/mlx5: separate DPDK from verbs Tx queue objects")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Patch [1] added, among other definitions, the macro MLX5_ST_SZ_DB.
Patch [2] added later the macro MLX5_ST_SZ_BYTES, which is exactly
the same macro with a different name.
Each of these macros was used in very few places.
This patch removes the definition of MLX5_ST_SZ_DB, and replaces it
with MLX5_ST_SZ_BYTES wherever it was used.
Macro MLX5_ST_SZ_BYTES was preffered since it is the same macro
name used in kernel code, see [3].
[1] http://patches.dpdk.org/patch/45254/
[2] http://patches.dpdk.org/patch/49403/
[3] https://lists.openwall.net/netdev/2014/10/02/75
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Add support to match all TCP control bits (flags)
except "NS (ECN-nonce)" via Direct Verbs (DV) or Direct Rule (DR)
engine.
Signed-off-by: Jack Min <jackmin@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
This driver should use dynamic log level not RTE_LOGTYPE_PMD.
Other drivers were converted back in 18.02.
This is really a bug, all other drivers use dynamic log levels
by now.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Multiple functions were declared in header file mlx5_rxtx.h,
implemented in mlx5_rxq.c, and called only in mlx5_rxq.c.
This patch moves all these functions declarations into mlx5_rxq.c,
as static functions.
Some functions implementation was copied higher in the file to
precede the functions calls.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Return value of function mlx5_rxq_releasable() was not described
correctly in function description.
This patch updates the description to correctly describe the optional
return values.
Fixes: a6d83b6a92 ("net/mlx5: standardize on negative errno values")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Function mlx5_rxq_ibv_release() is called in several places.
Before each call except one, the input parameter is validated to make
sure it is not null.
This patch adds the validation where it is missing.
It also changes a priv_ prefix, left in a comment, to mlx5_ prefix.
Fixes: af4f09f282 ("net/mlx5: prefix all functions with mlx5")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Functions implemented but never called:
mlx5_rxq_ibv_releasable()
mlx5_rxq_cleanup()
mlx5_txq_ibv_releasable()
Function declared but not implemented:
rxq_alloc_mprq_buf()
This patch removes these functions from code and header file.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Currently, i40e Flow Director action parser only allows following nine
action combinations: (QUEUE, PASSTHRU, DROP, QUEUE + MARK, PASSTHRU +
MARK, DROP + MARK, QUEUE + FLAG, PASSTHRU + FLAG, DROP + FLAG)
Using the existing Cloud Filter profile on the NIC, it is possible to
add support for two more combinations as: (MARK + RSS, MARK + FLAG +
RSS)
Addition of these new combinations would allow more applications to
utilize DPDK rte_flow to implement hardware flow offloads with Intel
Ethernet 700 series network adapters, including but not limited to the
existing OVS DPDK partial hardware flow offload feature.
Signed-off-by: Mesut Ali Ergin <mesut.a.ergin@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Also rename arp_hrd, arp_pro, arp_hln, arp_pln and arp_op fields
to avoid conflict with the #defines in gnu libc.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since ice can support 128, 512, 2K RSS RETA size value, change the
update API to set it to resize the RSS RETA table. And by default,
use 512 to sync with ETH_RSS_RETA_SIZE_x maximum value definition.
Also the flag ICE_FLAG_RSS_AQ_CAPABLE is missed to set.
Fixes: 690175ee51 ("net/ice: support getting device information")
Fixes: ff963bfa7c ("net/ice: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Tx desc's DD status is not cleaned by NIC automatically after packets
have been transmitted until software refill a new packet during next
loop. So when tx_free_thresh + tx_rs_thresh > nb_desc, it is possible
that an outdated DD status be checked as tx_next_dd, then segment fault
happen due to free a NULL mbuf pointer.
Then patch fixes this issue by
1. try to adapt tx_rs_thresh to an aggressive tx_free_thresh.
2. queue setup fail when tx_free_thresh + tx_rs_thresh > nb_desc
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Tx desc's DD status is not cleaned by NIC automatically after packets
have been transmitted until software refill a new packet during next
loop. So when tx_free_thresh + tx_rs_thresh > nb_desc, it is possible
that an outdated DD status be checked as tx_next_dd, then segment fault
happen due to free a NULL mbuf pointer.
Then patch fixes this issue by
1. try to adapt tx_rs_thresh to an aggressive tx_free_thresh.
2. queue setup fail when tx_free_thresh + tx_rs_thresh > nb_desc
Fixes: 50370662b7 ("net/ice: support device and queue ops")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Tx desc's DD status is not cleaned by NIC automatically after packets
have been transmitted until software refill a new packet during next
loop. So when tx_free_thresh + tx_rs_thresh > nb_desc, it is possible
that an outdated DD status be checked as tx_next_dd, then segment fault
happen due to free a NULL mbuf pointer.
Then patch fixes this issue by
1. try to adapt tx_rs_thresh to an aggressive tx_free_thresh.
2. queue setup fail when tx_free_thresh + tx_rs_thresh > nb_desc
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The nic's interrupt source has some active handler, which maybe call
ixgbe_dev_link_update() to set link handler. We should cancel the
link handler before remove dev to prevent executing the link handler.
It triggers segfault.
Fixes: 0408f47ba4 ("net/ixgbe: fix busy polling while fiber link update")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Wei Zhao <wei.zhao1@intel.com>
This commit sets the min and max supported MTU values for ice devices
via the ice_dev_info_get() function. Min MTU supported is set to
ETHER_MIN_MTU and max mtu is calculated as the max packet length
supported minus the transport overhead.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Refuse to create the second RSS flow rule as only one RSS key and
HASH register for each PF port. Users should delete the first rule
before setup the second rule.
Fixes: ecad87d223 ("net/i40e: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Wenjie Li <wenjiex.a.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Some application, e.g. the l3fwd-power sample uses rte_eth_rx_queue_count()
API to get the get the number of used descriptors of a Rx queue. This patch
adds fm10k implementation for this API.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Support link up and down functions for ice, and when stop the ice,
makes the link down also.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The "make clean" command had a number of issues:
- the "--ignore-fail-on-non-empty" flag is not present on BSD
- the call to remove the build folder would fail if there was no build
folder present.
These are fixed by only removing the build folder if it exists, and by
using -p flag to rmdir in place of --ignore-fail-on-non-empty
Fixes: 22119c4591 ("examples: use pkg-config in makefiles")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The examples/meson.build file scanned the filesystem to find all examples
to build (for examples=all option) and install. However, using run_command
and scanning the filesystem prevented ninja from properly detecting the
addition or removal of any examples - one had to recreate the build
directory from scratch to guarantee correct detection of all examples. This
patch replaces this generated list with a static list of examples, thereby
allowing proper tracking by ninja/meson, but at the cost of having to
update this file when a new example is added or removed.
This also fixes an issue with Windows builds, since "sh" is not available
there.
Fixes: 2daf565f91 ("examples: install as part of ninja install")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
While the examples were being installed into the appropriate install path
when processing the examples/meson.build file, that file was only processed
if the "examples" meson parameter was non-empty. Since we now do more than
just build the examples, we need to unconditionally process the file.
Fixes: 2daf565f91 ("examples: install as part of ninja install")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Start a new release cycle with empty release notes.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Function rte_power_set_env will no longer return
success on attempt to set env in initialized state.
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Reviewed-by: Rami Rosen <ramirose@gmail.com>
Acked-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add deprecation note for making changes in data structures, APIs
and macros in order to have more traffic classes, flexible
mapping of pipe queues to traffic classes, subport level
configuration of pipes and queues, etc. These changes are aligned
to improvements suggested in the RFC-
https://mails.dpdk.org/archives/dev/2018-November/120035.html
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
This patch adds deprecation notice of changing iv behaviour
when using Galois Counter Mode of operation.
With this change, IV of all supported sizes can be used.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
It is planned to make the rte_mem_config struct of the EAL private to
remove it from the visible ABI. Add a notice to announce the intention.
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Two public functions from EAL and metrics libraries need to return
some new error codes instead of calling rte_panic or rte_exit.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Arnon Warshavsky <arnon@qwilt.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
