Because accuracy of timing to the microsecond is not guaranteed
in rte_eal_alarm_set, this function will not be called before
the requested time, but may be called a period of time
afterwards which can not be calculated. In order to ensure
test alarm running success, this patch added the delay time
before check the flag.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Providing this parameter requests flow API isolated mode on all ports at
initialization time. It ensures all traffic is received through the
configured flow rules only (see flow command).
Ports that do not support this mode are automatically discarded.
Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Seen on Ubuntu 16.04 with GCC 5.4.0:
lib/librte_ether/rte_ethdev.c: In function 'get_mac_addr_index':
lib/librte_ether/rte_ethdev.c:2369:26: error:
'dev_info.max_mac_addrs' may be used uninitialized in this function
Indeed, rte_eth_dev_info_get() do not write into dev_info
if the port_id is not valid.
So we need to check the port_id and return in case of error.
This extra check should not be needed because the port_id is always
checked before calling get_mac_addr_index().
However it does not hurt.
Reported-by: Matan Azrad <matan@mellanox.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Matan Azrad <matan@mellanox.com>
Add the support of the Traffic Management API,
rte_tm_hierarchy_commit.
When calling this API, the driver tries to enable
the TM configuration on HW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
To support QoS scheduler APIs, create a new C file for
the TM (Traffic Management) ops but without any function
implemented.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add the support of the Traffic Management API,
rte_tm_hierarchy_commit.
When calling this API, the driver tries to enable
the TM configuration on HW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
To support QoS scheduler APIs, create a new C file for
the TM (Traffic Management) ops but without any function
implemented.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The rte_flow feature breaks the monolithic approach for ethdev by
introducing the new rte_flow API to ethdev using a plugin-like approach.
Basically, the rte_flow API is still logically part of ethdev:
- It extends the ethdev functionality: rte_flow is a new feature/
capability of ethdev;
- all its functions work on an Ethernet device: the first parameter of the
rte_flow functions is Ethernet device port ID.
Also, the rte_flow API is a sort of capability plugin for ethdev:
- the rte_flow API functions have their own name space: they are called
rte_flow_operationXYZ() as opposed to rte_eth_dev_flow_operationXYZ());
- the rte_flow API functions are placed in separate files in the same
librte_ether folder as opposed to rte_ethdev.[hc].
The way it works is by using the existing ethdev API function
rte_eth_dev_filter_ctrl() to query the current Ethernet device port ID for
the support of the rte_flow capability and return the pointer to the
rte_flow operations when supported and NULL otherwise:
struct rte_flow_ops *eth_flow_ops;
int rte = rte_eth_dev_filter_ctrl(eth_port_id,
RTE_ETH_FILTER_GENERIC, RTE_ETH_FILTER_GET, ð_flow_ops);
This patch reuses the same approach for ethdev Traffic Management API.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Removed unnecessary macro RTE_STD_C11, which is used
for unnamed structs.
Since there is no longer an unnamed structure in
rte_cryptodev_sym_session, this is not needed and
it is actually breaking compilation on icc:
lib/librte_cryptodev/rte_cryptodev.h(887): error: expected a declaration
__extension__ void *sess_private_data[0];
^
Fixes: 7c110ce7aa4e ("cryptodev: remove mempool from session")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
It isn't necessary to use rte_bus_find_by_name() to find a reference to
our own bus.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Instead of getting the name from the devargs lets take it from the
rte_device.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Added API change description - moved bypass functions
from the rte_ethdev library to ixgbe PMD
Fixes: e261265e42a1 ("ethdev: move bypass functions to ixgbe PMD")
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Used rte_log2_u32() to replace integer log2() to
remove libm dependency.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
NXP Copyright has been wrongly worded with '(c)' at various places.
This patch removes these extra characters. It also removes
"All rights reserved".
Only NXP copyright syntax is changed. Freescale copyright is not
modified.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
vaddvq_u16() is not available for armv7.
Emulate the vaddvq_u16() using armv7 NEON intrinsics.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
The ReadTheDocs theme is no longer available by default in
Sphinx versions >= 1.3.1 and if it isn't available then an
exception is raised. This patch imports the ReadTheDocs
theme when it is available and warns but proceeds when it
isn't.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Add a note to indicate that only first four ports can be
tested with this application.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Updated note to make users aware that the packet capture framework
is initialized by default only in testpmd. Other primary applications
need to explicitly modify the code to do this initialization.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Add libnuma as a dependency to the Linux Getting Started Guide
since it is a new requirement in DPDK 17.08+.
Fixes: 1b72605d2416 ("mem: balanced allocation of hugepages")
Signed-off-by: John McNamara <john.mcnamara@intel.com>
From documentation it is very unclear how VMDq configuration can be
tweaked, and online search offer very poor results.
This patch will ultimately spawn an online documentation page
for the rte_eth_vmdq_rx_conf struct which will eventually add a bit of
documentation about the rx_mode tag and how to allow e.g. VMDq pools
to receive packets without VLAN tags.
Signed-off-by: Tom Barbette <tom.barbette@ulg.ac.be>
Acked-by: John McNamara <john.mcnamara@intel.com>
In order to be able to replicate a configuration onto a second port,
device configuration should be fully described and available.
Other configuration items (i.e. MAC addresses) are stored within
rte_eth_dev_data, but not this one.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
This trivial patch removes wrong comments about
the return value of the rte_bus_dump(), as
this method does not return any value
(it's return type is void)
Fixes: a97725791eec ("bus: introduce bus abstraction")
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Virtual device/driver probing done via name.
A new alternative method introduced to probe the device with providing
driver name in devargs as "driver=<driver_name>".
This patch removes alternative method and fixes virtual device usages
with proper device names.
Fixes: 87c3bf29c642 ("test: do not short-circuit null device creation")
Fixes: d39670086a63 ("eal: parse driver argument before probing drivers")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
The current virtio supports Transmit Segmentation Offload, but
does not really support Large Receive Offload. The driver was confusing
the two offloads.
Fixes: 86d59b21468a ("net/virtio: support LRO")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The virtio driver is confused about the meaning of the ip_checksum
flag. In DPDK, ip_checksum means the hardware is capable of checking
the Layer 3 IP checksum. But KVM/QEMU does not do that. The flag
VIRTIO_NET_F_GUEST_CSUM controls whether the receive side does
Layer 4 (TCP/UDP) checksum offload.
Fix by erroring out any requests to do IP checksum.
Fixes: 96cb6711939e ("net/virtio: support Rx checksum offload")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
This patch enables TCP/IPv4 GRO library in csum forwarding engine.
By default, GRO is turned off. Users can use command "gro (on|off)
(port_id)" to enable or disable GRO for a given port. If a port is
enabled GRO, all TCP/IPv4 packets received from the port are performed
GRO. Besides, users can set max flow number and packets number per-flow
by command "gro set (max_flow_num) (max_item_num_per_flow) (port_id)".
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
In this patch, we introduce five APIs to support TCP/IPv4 GRO.
- gro_tcp4_reassemble: reassemble an inputted TCP/IPv4 packet.
- gro_tcp4_tbl_create: create a TCP/IPv4 reassembly table, which is used
to merge packets.
- gro_tcp4_tbl_destroy: free memory space of a TCP/IPv4 reassembly table.
- gro_tcp4_tbl_pkt_count: return the number of packets in a TCP/IPv4
reassembly table.
- gro_tcp4_tbl_timeout_flush: flush timeout packets from a TCP/IPv4
reassembly table.
TCP/IPv4 GRO API assumes all inputted packets are with correct IPv4
and TCP checksums. And TCP/IPv4 GRO API doesn't update IPv4 and TCP
checksums for merged packets. If inputted packets are IP fragmented,
TCP/IPv4 GRO API assumes they are complete packets (i.e. with L4
headers).
In TCP/IPv4 GRO, we use a table structure, called TCP/IPv4 reassembly
table, to reassemble packets. A TCP/IPv4 reassembly table includes a key
array and a item array, where the key array keeps the criteria to merge
packets and the item array keeps packet information.
One key in the key array points to an item group, which consists of
packets which have the same criteria value. If two packets are able to
merge, they must be in the same item group. Each key in the key array
includes two parts:
- criteria: the criteria of merging packets. If two packets can be
merged, they must have the same criteria value.
- start_index: the index of the first incoming packet of the item group.
Each element in the item array keeps the information of one packet. It
mainly includes three parts:
- firstseg: the address of the first segment of the packet
- lastseg: the address of the last segment of the packet
- next_pkt_index: the index of the next packet in the same item group.
All packets in the same item group are chained by next_pkt_index.
With next_pkt_index, we can locate all packets in the same item
group one by one.
To process an incoming packet needs three steps:
a. check if the packet should be processed. Packets with one of the
following properties won't be processed:
- FIN, SYN, RST, URG, PSH, ECE or CWR bit is set;
- packet payload length is 0.
b. traverse the key array to find a key which has the same criteria
value with the incoming packet. If find, goto step c. Otherwise,
insert a new key and insert the packet into the item array.
c. locate the first packet in the item group via the start_index in the
key. Then traverse all packets in the item group via next_pkt_index.
If find one packet which can merge with the incoming one, merge them
together. If can't find, insert the packet into this item group.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
