Segmented frames not supported for out-of-place case.
This patch returns err if such config is requested.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Asymmetric crypto is not required for test-crypto-perf application.
Disabling the feature using 'ff_disable' field.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Shally Verma <shallyv@marvell.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Currently, there's no return status check from lcore's jobs.
In case of fail - crypto-perf tool returns success anyway.
This patch adds such a detection and returns proper status at the end.
Fixes: ce8af1a439 ("app/crypto-perf: wait for cores launched by app")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Jozwiak <tjozwiakgm@gmail.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch changes 'only_once' variable to 'display_once',
which should be atomic type due to fact, that all runner functions
can be executed in paraller way on different lcores.
Fixes: df52cb3b6e ("app/crypto-perf: move verify as single test type")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Jozwiak <tjozwiakgm@gmail.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Adding a new field, ff_disable, to allow applications to control the
features enabled on the crypto device. This would allow for efficient
usage of HW/SW offloads.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The format for printing float is incorrect for the following fields
in pmd-cyclecount test: Cycles/Op,Cycles/Enq,Cycles/Deq.
Currently, the format is %.f3. This format will round off the number to
the nearest integer and append a 3 after that.
This patch changes the format to %.3f. This will print the number as a
floating point with a precision of 3 fractional digits.
Fixes: 96dfeb609b ("app/crypto-perf: add new PMD benchmarking mode")
Cc: stable@dpdk.org
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
The socket_id is used as an array index so should be within the range
of zero to max numa nodes. Add a range check to ensure we don't get
excessive values.
Coverity issue: 336812
Coverity issue: 336829
Fixes: 2c59bd32b7 ("cryptodev: do not create session mempool internally")
CC: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Rename the macro and all instances in DPDK code, but keep a copy of
the old macro defined for legacy code linking against DPDK
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This patch uses the two session mempool approach to crypto perf
application. One mempool is for session header objects, and the other
is for session private data.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch changes the cryptodev queue pair configure structure
to enable two mempool passed into cryptodev PMD simutaneously.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds telemetry as a dependecy to all applications. Without these
changes, the --telemetry flag will not be recognised and applications will
fail to run if they want to enable telemetry.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The field, 'cipher_iv.data' is allocated twice when cipher is not null.
Ideally the allocation should depend only on the field
'cperf_options.cipher_iv_sz'. This will make sure this code path gets
valid for ciphers which doesn't require IV.
Fixes: 0fbd75a99f ("cryptodev: move IV parameters to session")
Cc: stable@dpdk.org
Signed-off-by: Akash Saxena <akash.saxena@caviumnetworks.com>
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
IV is not required for all ciphers. Making sure the null check is done
only when 'cipher_iv_sz' is non-zero.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Akash Saxena <akash.saxena@caviumnetworks.com>
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Authentication key is not required for all algorithms. Making sure the
null check is done only when 'auth_key_sz' is non-zero.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Signed-off-by: Ayuj Verma <ayuj.verma@caviumnetworks.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Auth IV offset was not being set when creating the crypto session.
Fixes: acf8616901 ("cryptodev: add auth IV")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The crypto performance application was not being compiled
with -O3, which means that the performance shown may not be
optimal.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Using a small number of sessions results in rte_mempool_create call
with cache_size > n, which fails. There is no need to cache the elements,
as there is no performance impact.
Fixes: 501c0a3b14 ("app/crypto-perf: limit number of sessions")
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Crypto dev would specify its headroom and tailroom requirement and the
application is expected to honour this while creating buffers.
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Currently, the info structure contains the maximum number
of sessions that a device can manage.
This field was useful when the session mempool was created inside
each device, but now it is created at the application level.
Most PMDs do not have a limitation on the sessions managed,
but a few do, therefore this field must remain in the structure.
However, a new value, 0, can be used to indicate that
a device does not have an actual maximum of sessions.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Instead of creating a fixed number of sessions,
calculate the necessary number based on number of devices
and queue pairs used.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
rte_cryptodev_get_header_session_size() and
rte_cryptodev_get_private_session_size() functions are
targeting symmetric sessions.
With the future addition of asymmetric operations,
these functions need to be renamed from *cryptodev_*_session_*
to *cryptodev_sym_*_session_* to be symmetric specific.
The two original functions are marked as deprecated
and will be removed in 18.08, so applications can still
use the functions in 18.05.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Shally Verma <shally.verma@caviumnetworks.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
inlined from ‘cperf_test_vector_get_from_file’ at
app/test-crypto-perf/cperf_test_vector_parsing.c:578:11:
app/test-crypto-perf/cperf_test_vector_parsing.c:510:3: error:
‘strncpy’ output truncated before terminating nul copying as many bytes
from a string as its length [-Werror=stringop-truncation]
strncpy(entry, line, strlen(line));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
app/test-crypto-perf/cperf_test_vector_parsing.c:528:5: error:
‘strncat’ output truncated before terminating nul copying as many bytes
from a string as its length [-Werror=stringop-truncation]
strncat(entry, line, strlen(line));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Found this issue with meson build and gcc 8.1.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The crypto performance application requires at least
two cores: one master core that launches the other slaves
and one core acting as slave running the crypto device.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
The current code usages the default mempool ops while
creating the mempool for crypto usages. Adding the support
for best_mempool_ops to enable it for devices using
non default mempools.
Signed-off-by: Ashish Jain <ashish.jain@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
If number of available devices are more than logical core,
there is no need to throw an error.
Just use the less number of devices instead.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
IOVA addresses should be found by calling rte_virt2iova() as
opposed to rte_virt2phy(), as physical address may not be
equal to IOVA address.
Fixes: 2eb6a1a3e5 ("app/crypto-perf: fix crypto op init")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Add remaining subdirectories in the app folder to the meson build.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Two macros were defined in cryptodev, to serve the same
purpose: RTE_CRYPTODEV_NAME_LEN (in the config file) and
RTE_CRYPTODEV_NAME_MAX_LEN (in the rte_cryptodev.h file).
Since the second one is part of the external API,
the first one has been removed, avoiding duplications.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Add support for IMIX performance tests, where a distribution
of various packet sizes can be submitted to a crypto
device, testing a closer to a real world scenario.
A sequence of packet sizes, selected randomly from a list of packet
sizes (with "buffer-sz" parameter) with a list of the weights
per packet size (using "imix" parameter), is generated
(the length of this sequence is the same length as the pool,
set with "pool-sz" parameter).
This sequence is used repeteadly for all the crypto
operations submitted to the crypto device (with "--total-ops" parameter).
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Repeated occurrences of 'the'.
The change was obtained using the following command:
sed -i "s;the the ;the ;" `git grep -l "the "`
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The mempool and the physical address of the crypto operation
at mempool initialization were not being set,
leading to incorrect physical addresses.
Fixes: bf9d6702ec ("app/crypto-perf: use single mempool")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Renamed data type from phys_addr_t to rte_iova_t.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The following inline functions and macros have been renamed to be
consistent with the IOVA wording:
rte_mbuf_data_dma_addr -> rte_mbuf_data_iova
rte_mbuf_data_dma_addr_default -> rte_mbuf_data_iova_default
rte_pktmbuf_mtophys -> rte_pktmbuf_iova
rte_pktmbuf_mtophys_offset -> rte_pktmbuf_iova_offset
The deprecated functions and macros are kept to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Rename buf_physaddr to buf_iova.
Keep the deprecated name in an anonymous union to avoid breaking
the API.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The function rte_mempool_virt2phy() is renamed to rte_mempool_virt2iova().
The new function has one less parameter because it is unused.
The deprecated function is kept as an alias to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The function rte_malloc_virt2phy() is renamed to rte_malloc_virt2iova().
The deprecated name is kept as an alias to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
app/test-crypto-perf/main.c:596:6: error: ‘total_nb_qps’ may be
used uninitialized in this function [-Werror=maybe-uninitialized]
if (i == total_nb_qps)
^
Fixes: c4f916e332 ("app/crypto-perf: support multiple queue pairs")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
According to the API, AES-CCM has special requirements
when setting IV and AAD fields.
The L2fwd-crypto app is updated to set the nonce (IV)
and AAD in the right positions in these two fields
(1 byte after start of IV field and 18 bytes after start
of AAD).
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
In order to improve memory utilization, a single mempool
is created, containing the crypto operation and mbufs
(one if operation is in-place, two if out-of-place).
This way, a single object is allocated and freed
per operation, reducing the amount of memory in cache,
which improves scalability.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add support for multiple queue pairs, when there are
more logical cores available than crypto devices enabled.
For instance, if there are 4 cores available and
2 crypto devices, each device will have two queue pairs.
This is useful to have multiple logical cores using
a single crypto device, without needing to initialize
a crypto device per core.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
For throughput and latency tests, it is not required
to populate the mbufs with any test vector.
For verify test, there is already a function that rewrites
the mbufs every time they are going to be used with
crypto operations.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
When running the verify test, mbufs in the pool were
populated with the test vector loaded from a file.
To avoid limiting the number of operations to the pool size,
mbufs will be rewritten with the test vector, before
linking them to the crypto operations.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Instead of parsing number of segments, from the command line,
parse segment size, as it is a more usual case to have
the segment size fixed and then different packet sizes
will require different number of segments.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Since DPDK 17.08, there is specific parameters
for AEAD algorithm, like AES-GCM. When verifying
crypto operations with test vectors, the parser
was not reading AEAD data (such as IV or key).
Fixes: 8a5b494a7f ("app/test-crypto-perf: add AEAD parameters")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
