When RSS init, because of profile overlap, the GTPU_IPV4 packets
don't hit GTPU_INNER_IPV4 profile which causes no hash value. Because
of no PPPoE profile, the PPPoE packets also has no hash value. This
patch solves this issue by pulling GTPU_IPV4 profile into inner ipv4
group and creating related PPPoE profile at the same time.
Fixes: 4717a12cfaf1 ("net/ice: initialize and update RSS based on user config")
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When create a RSS rule with void action, the error log is "Invalid
input set". This patch fix the issue by adding check for the type of
first actions item.
Fixes: 7615a6895009 ("net/ice: rework for generic flow enabling")
Cc: stable@dpdk.org
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch enables PPPoE control packets with src mac and session id
and PPPoE data packets with ip address and L4 port in rte_flow.
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch add the total input set byte number check,
as there is a hardware requirement for the total number
of 32 byte.
Fixes: 47d460d63233 ("net/ice: rework switch filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch add more specific tunnel type for ipv4/ipv6 packet,
it enable tcp/udp layer of ipv4/ipv6 as L4 payload but without
L4 dst/src port number as input set for the switch filter rule.
Fixes: 47d460d63233 ("net/ice: rework switch filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch add check for protocol type of IPv4 packet,
it need to update tunnel type when NVGRE is in payload.
Fixes: 6bc7628c5e0b ("net/ice: change default tunnel type")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch add more support for switch parser of PPPoE packet,
it enable parse tcp/udp L4 layer and ipv4/ipv6 L3 layer parser for
PPPoE payload, so we can use L4 dst/src port and L3 ip address as
input set for switch filter PPPoE related rule.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Fix the build error in DCF when CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC
compilation option is enabled. Legacy 16 byte Rx descriptor is not
supported in DCF. If it is enabled, DCF configuration stops.
Fixes: 929eceefaba7 ("net/ice: add queue start and stop for DCF")
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This fix has been added to address memory leak issues resulting from
triggering a sudden driver reset which does not allow us to follow our
normal removal flows for SW XLT entries for advanced features.
- Adding call to destroy flow profile locks when clearing SW XLT tables.
- Extraction sequence entries were not correctly cleared previously
which could cause ownership conflicts for repeated reset-replay calls.
Fixes: 969890d505b1 ("net/ice/base: enable clearing of HW tables")
Cc: stable@dpdk.org
Signed-off-by: Vignesh Sridhar <vignesh.sridhar@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
The ice_parse_caps function is used to convert the capability block data
coming from firmware into a structured format used by other parts of the
code.
The current implementation directly updates the hw->func_caps and
hw->dev_caps structures. It is directly called from within
ice_aq_discover_caps. This causes the discover_caps function to have the
side effect of modifying the hw capability structures, which is not
intuitive.
Split this function into ice_parse_dev_caps and ice_parse_func_caps.
These functions will take a pointer to the dev_caps and func_caps
respectively. Also create an ice_parse_common_caps for sharing the
capability logic that is common to device and function.
Doing so enables a future refactor to allow reading and parsing
capabilities into a local caps structure instead of modifying the
members of the hw structure directly.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
The current implementation for reading device and function capabilities
from firmware, ice_aq_discover_caps, has potentially undesirable
side effects.
ice_aq_discover_caps calls ice_parse_caps, resulting in overwriting the
capabilities stored in the hw structure. This is ok during
initialization, but means that code which wants to read the capabilities
after initialization cannot use ice_aq_discover_caps without being
careful of the side effects.
Factor out the AQ command logic into a new ice_aq_list_caps function.
This will be used by the ice_aq_discover_caps function.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Remove unused macro and function.
Declare no external referenced function as static.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
To implement a FW workaround for LFC, a set_local_mib must be
performed after every link up event. For systems that do not
have DCB configured, we need to move the function
ice_aq_set_lldp_mib() from the DCB specific ice_dcb.c to
ice_common.c so that the driver always has access to this AQ
command.
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Cleanup code style issue reported by kernel checkpatch.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
An IP header combined with GTP-U header should be regarded as
inner layer for RSS, otherwise it mess the field vector between
an IPv4 rule and IPv6 rule e.g:
testpmd> flow create 0 ingress pattern eth / ipv4 / udp / gtpu / \
gtpu_psc / ipv4 / udp / end actions rss types ipv4-udp end key_len \
0 queues end / end
testpmd> flow create 0 ingress pattern eth / ipv4 / udp / gtpu / \
gtpu_psc / ipv6 / udp / end actions rss types ipv6-udp end key_len \
0 queues end / end
Fixes: b7d34ccc47b5 ("net/ice/base: packet encapsulation for RSS")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Support redirect a switch rule if its action is to VSI list.
Fixes: 397b4b3c5095 ("net/ice: enable flow redirect on switch")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Kernel driver reads EEPROM data from flash but DPDK reads from
shadow ram. This patch fixes the issue by changing method to get
EEPROM data from flash.
Fixes: 68a1ab82ad74 ("net/ice: speed up to retrieve EEPROM")
Cc: stable@dpdk.org
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add support to allow the original VF actions in DCF.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Introduce the RTE_LOG_REGISTER macro to avoid the code duplication
in the logtype registration process.
It is a wrapper macro for declaring the logtype, registering it and
setting its level in the constructor context.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add support to add and delete MAC address filter in DCF.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Ting Xu <ting.xu@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Add support to get and reset Rx/Tx stats in DCF. Query stats
from PF.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Ting Xu <ting.xu@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Add queue start and stop in DCF. Support queue enable and disable
through virtual channel. Add support for Rx queue mbufs allocation
and queue reset.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Ting Xu <ting.xu@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Add queues and Rx queue irqs configuration during device start
in DCF. The setup is sent to PF via virtchnl.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Ting Xu <ting.xu@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Add support to get complete device information for DCF, including
Rx/Tx offload capabilities and default configuration.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Ting Xu <ting.xu@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Enable RSS parameters initialization and get the supported
flexible descriptor RXDIDs bitmap from PF during DCF init.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Ting Xu <ting.xu@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Initialize and update RSS configure based on user request
(rte_eth_rss_conf) from dev_configure and .rss_hash_update ops.
All previous default configure has been removed.
Signed-off-by: Junyu Jiang <junyux.jiang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Replacing flow profile locks with RSS profile locks in the function to
remove all RSS rules for a given VSI. This is to align the locks used
for RSS rule addition to VSI and removal during VSI teardown to avoid
a race condition owing to several iterations of the above operations.
In function to get RSS rules for given VSI and protocol header replacing
the pointer reference of the RSS entry with a copy of hash value to
ensure thread safety.
Signed-off-by: Vignesh Sridhar <vignesh.sridhar@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
set_rss_lut failed due to incorrect vsi_id mask. vsi_id is 10 bit
but mask was 0x1FF whereas it should be 0x3FF.
For vsi_num >= 512, FW set_rss_lut has been failing with return code
EACCESS (vsi ownership issue) because software was providing
incorrect vsi_num (dropping 10th bit due to incorrect mask) for
set_rss_lut admin command
Fixes: a90fae1d0755 ("net/ice/base: add admin queue structures and commands")
Cc: stable@dpdk.org
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
In order to find proper dummy packets for switch filter,
it need to check ipv4 next protocol number, if it is 0x06,
which means next payload is TCP, we need to use TCP
format dummy packet.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
This patch add support to get tunnel type of recipe
after get recipe from FW. This will fix the issue in
function ice_find_recp() for tunnel type comparing.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add FDIR support for MAC_IPV6_GTPU type with outer IPv6 address, teid
and qfi fields matching.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
The grst_delay variable in ice_check_reset contains the maximum time
(in 100 msec units) that the driver will wait for a reset event to
transition to the Device Active state. The value is the sum of three
separate components:
1) The maximum time it may take for the firmware to process its
outstanding command before handling the reset request.
2) The value in RSTCTL.GRSTDEL (the delay firmware inserts between first
seeing the driver reset request and the actual hardware assertion).
3) The maximum expected reset processing time in hardware.
Referring to this total time as "grst_delay" is misleading and
potentially confusing to someone checking the code and cross-referencing
the hardware specification.
Fix this by renaming the variable to "grst_timeout", which is more
descriptive of its actual use.
Signed-off-by: Nick Nunley <nicholas.d.nunley@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
System diagnostic solution extend the ability to fetch FW
internal status data and error indication.
Signed-off-by: Sharon Haroni <sharon.haroni@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add outer IP address fields while generating the training packets for
GTPU, so that we can support FDIR based on outer IP of GTPU.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
The ice_discover_caps function is used to read the device and function
capabilities, updating the hardware capabilities structures with
relevant data.
The exact number of capabilities returned by the hardware is unknown
ahead of time. The AdminQ command will report the total number of
capabilities in the return buffer.
The current implementation involves requesting capabilities once,
reading this returned size, and then re-requested with that size.
This isn't really necessary. The firmware interface has a maximum size
of ICE_AQ_MAX_BUF_LEN. Firmware can never return more than
ICE_AQ_MAX_BUF_LEN / sizeof(struct ice_aqc_list_caps_elem) capabilities.
Avoid the retry loop by simply allocating a buffer of size
ICE_AQ_MAX_BUF_LEN. This is significantly simpler than retrying. The
extra allocation isn't a big deal, as it will be released after we
finish parsing the capabilities.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
The profile id map lock should be held till the caller completes
all references of that profile entries.
The current code releases the lock right after the match search.
This caused a driver issue when the profile map entries were
referenced after it was freed in other thread after the lock was
released earlier.
Also return type of get/set profile functions were changed to
return the ice status instead of the profile entry pointer.
This will prevent the caller referencing the profile fields
outside the lock.
Signed-off-by: Victor Raj <victor.raj@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Remove PPPoD's packet type from PPPoE's ptype bitmap.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
In the flow API, add ability to add IPV4/IPV6 rules that match on
packets with or without inner L4 protocols.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
There isn't a case for 1G SGMII in ice_get_media_type() so add
the handling for it.
Also handle the special case where some direct attach
cables may report that they support 1G SGMII, but
that is erroneous since SGMII is supposed to be a
backplane media type (between a MAC and a PHY). If
the driver doesn't handle this special case then a
user could see the 'Port' in ethtool change from
'Direct attach Copper' to 'Backplane' when they have
forced the speed to 1G, but the cable hasn't changed.
Lastly, change ice_aq_get_phy_caps() to save the
module_type info if the function was called with
ICE_AQC_REPORT_TOPO_CAP. This call uses the media
information to populate the module_type. If no
media is present then the values in module_type
will be 0.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
This patch add initialization for prof_res_bm_init flag
to zero in order that the possible resource for field vector
in the package file can be initialized.(in ice_init_prof_result_bm)
Fixes: 453d087ccaff ("net/ice/base: add common functions")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
This patch add more tunnel type definition ipv4/ipv6 packet,
it enable tcp/udp layer of ipv4/ipv6 as L4 payload but without
L4 dst/src port number as input set for switch filter rule.
For example:
we can download a switch rule to direct ipv4 packet with specific
source and destination ip address to queue index 1.
"eth / ipv4 src is 192.168.0.1 dst is 192.168.0.2 / udp /
end actions queue index 1 / end"
this type of rule will be matched with ipv4/udp file only.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
The parameter ref_cnt is used for tracking how many
rules are reusing this VSI list, so it can only be
updated when a rule which using this list be deleted.
Fixes: f89aa3affa9e ("net/ice/base: support removing advanced rule")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
