Commit Graph

41 Commits

Author SHA1 Message Date
Igor Romanov
70febdcfd6 examples: check status of getting MAC address
The return value of rte_eth_macaddr_get() was changed from void to int.
Update the usage of the functions according to the new return type.

Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
2019-10-07 15:00:55 +02:00
Ivan Ilchenko
f430bbcecf examples: take promiscuous mode switch result into account
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these functions across examples according to new return type.

Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
2019-10-07 15:00:54 +02:00
Ivan Ilchenko
089e5ed727 examples: check status of getting ethdev info
rte_eth_dev_info_get() return value was changed from void to
int, so this patch modify rte_eth_dev_info_get() usage across
examples according to its new return type.

Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
2019-10-07 14:45:35 +02:00
David Marchand
0c9da7555d net: replace IPv4/v6 constants with uppercase name
Since we change these macros, we might as well avoid triggering complaints
from checkpatch because of mixed case.

old=RTE_IPv4
new=RTE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"

old=RTE_ETHER_TYPE_IPv4
new=RTE_ETHER_TYPE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"

old=RTE_ETHER_TYPE_IPv6
new=RTE_ETHER_TYPE_IPV6
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"

Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
2019-06-03 16:54:54 +02:00
Stephen Hemminger
2b7a03c50b examples/bond: use lcore accessors
Referring to lcore_config directly is no longer recommended.
Also remove unnecessary assignment of slave_core_id.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Marchand <david.marchand@redhat.com>
2019-06-03 12:30:17 +02:00
Olivier Matz
a7c528e5d7 net: add rte prefix to IP structure
Add 'rte_' prefix to structures:
- rename struct ipv4_hdr as struct rte_ipv4_hdr.
- rename struct ipv6_hdr as struct rte_ipv6_hdr.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
2019-05-24 13:34:46 +02:00
Olivier Matz
35b2d13fd6 net: add rte prefix to ether defines
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.

Do not update the command line library to avoid adding a dependency to
librte_net.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
2019-05-24 13:34:45 +02:00
Olivier Matz
538da7a1ca net: add rte prefix to ether functions
Add 'rte_' prefix to functions:
- rename is_same_ether_addr() as rte_is_same_ether_addr().
- rename is_zero_ether_addr() as rte_is_zero_ether_addr().
- rename is_unicast_ether_addr() as rte_is_unicast_ether_addr().
- rename is_multicast_ether_addr() as rte_is_multicast_ether_addr().
- rename is_broadcast_ether_addr() as rte_is_broadcast_ether_addr().
- rename is_universal_ether_addr() as rte_is_universal_ether_addr().
- rename is_local_admin_ether_addr() as rte_is_local_admin_ether_addr().
- rename is_valid_assigned_ether_addr() as rte_is_valid_assigned_ether_addr().
- rename eth_random_addr() as rte_eth_random_addr().
- rename ether_addr_copy() as rte_ether_addr_copy().
- rename ether_format_addr() as rte_ether_format_addr().

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
2019-05-24 13:34:45 +02:00
Olivier Matz
6d13ea8e8e net: add rte prefix to ether structures
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.

Do not update the command line library to avoid adding a dependency to
librte_net.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
2019-05-24 13:34:45 +02:00
Olivier Matz
e482e0fa6a net: add rte prefix to ARP defines
Add 'RTE_' prefix to defines:
- rename ARP_HRD_ETHER as RTE_ARP_HRD_ETHER.
- rename ARP_OP_REQUEST as RTE_ARP_OP_REQUEST.
- rename ARP_OP_REPLY as RTE_ARP_OP_REPLY.
- rename ARP_OP_REVREQUEST as RTE_ARP_OP_REVREQUEST.
- rename ARP_OP_REVREPLY as RTE_ARP_OP_REVREPLY.
- rename ARP_OP_INVREQUEST as RTE_ARP_OP_INVREQUEST.
- rename ARP_OP_INVREPLY as RTE_ARP_OP_INVREPLY.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
2019-05-24 13:34:44 +02:00
Olivier Matz
f2745bfebc net: add rte prefix to ARP structures
Also rename arp_hrd, arp_pro, arp_hln, arp_pln and arp_op fields
to avoid conflict with the #defines in gnu libc.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
2019-05-24 13:34:44 +02:00
Radu Nicolau
292fdb7602 examples/bond: fix crash when there is no active slave
If bond_ethdev_rx_burst() called more times with no active slaves
the active slave index will point out of bounds, resulting in a
segfault.
The configured slaves needs to be checked, and if none became active
there is no point going further.

Do not start the packet processing threads until all configured
slaves become active.

Fixes: cc7e8ae84f ("examples/bond: add example application for link bonding mode 6")
Cc: stable@dpdk.org

Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Chas Williams <chas3@att.com>
2018-12-13 16:32:10 +00:00
Radu Nicolau
2eee509c7c examples/bond: fix initialization order
Queue setup will fail if called before adding slaves.

Fixes: 7a0665940f ("net/bonding: inherit descriptor limits from slaves")
Cc: stable@dpdk.org

Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Chas Williams <chas3@att.com>
2018-12-13 16:32:10 +00:00
Ferruh Yigit
323e7b667f ethdev: make default behavior CRC strip on Rx
Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.

PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.

Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
2018-09-14 20:08:41 +02:00
Ferruh Yigit
4f5701f28b examples: fix RSS hash function configuration
ethdev layer introduced checks for application requested RSS hash
functions and returns error for ones unsupported by hardware

This check breaks some sample applications which blindly configures
RSS hash functions without checking underlying hardware support.

Updated examples to mask out unsupported RSS has functions during device
configuration.
Prints a log if configuration values updated by this check.

Fixes: aa1a6d87f1 ("ethdev: force RSS offload rules again")

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Meijuan Zhao <meijuanx.zhao@intel.com>
Tested-by: Yingya Han <yingyax.han@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
2018-07-05 15:46:48 +02:00
Ferruh Yigit
ab3ce1e0c1 ethdev: remove old offload API
In DPDK 17.11, the ethdev offloads API has changed:
	commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")
	commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
The new API is documented in the programmer's guide:
	http://doc.dpdk.org/guides/prog_guide/poll_mode_drv.html#hardware-offload

For reminder, the main concepts in the new API were:
	- All offloads are disabled by default
	- Distinction between per port and per queue offloads.

The transition bits are now removed:
	- Translation of the old API in ethdev
	- rte_eth_conf.rxmode.ignore_offload_bitfield
	- ETH_TXQ_FLAGS_IGNORE

The old API bits are now removed:
	- Rx per-port rte_eth_conf.rxmode.[bit-fields]
	- Tx per-queue rte_eth_txconf.txq_flags
	- ETH_TXQ_FLAGS_NO*

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Shahaf Shuler <shahafs@mellanox.com>
2018-07-04 21:50:32 +02:00
Gaetan Rivet
b65ecf1993 devargs: rename legacy API
The previous symbols were deprecated for two releases.
They are now marked as such and cannot be used anymore.

They are replaced by ones respecting the new namespace that are marked
experimental.

As a result, eth_dev attach and detach are slightly reworked to follow
the changes.

Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
2018-04-25 04:00:37 +02:00
Thomas Monjalon
d9a42a69fe ethdev: deprecate port count function
Some DPDK applications wrongly assume these requirements:
    - no hotplug, i.e. ports are never detached
    - all allocated ports are available to the application

Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.

In order to fix this common mistake in all external applications,
the function rte_eth_dev_count is deprecated, while introducing
the new functions rte_eth_dev_count_avail and rte_eth_dev_count_total.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
2018-04-18 00:48:41 +02:00
Thomas Monjalon
a9dbe18022 fix ethdev port id validation
Some DPDK applications wrongly assume these requirements:
    - no hotplug, i.e. ports are never detached
    - all allocated ports are available to the application

Such application assume a valid port index is in the range [0..count[.

There are three consequences when using such wrong design:
    - new ports having an index higher than the port count won't be valid
    - old ports being detached (RTE_ETH_DEV_UNUSED) can be valid

Such mistake will be less common with growing hotplug awareness.
All applications and examples inside this repository - except testpmd -
must be fixed to use the function rte_eth_dev_is_valid_port.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
2018-04-18 00:37:05 +02:00
Thomas Monjalon
8728ccf376 fix ethdev ports enumeration
Some DPDK applications wrongly assume these requirements:
    - no hotplug, i.e. ports are never detached
    - all allocated ports are available to the application

Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.

There are three consequences when using such wrong design:
    - new ports having an index higher than the port count won't be seen
    - old ports being detached (RTE_ETH_DEV_UNUSED) can be seen as ghosts
    - failsafe sub-devices (RTE_ETH_DEV_DEFERRED) will be seen by the application

Such mistake will be less common with growing hotplug awareness.
All applications and examples inside this repository - except testpmd -
must be fixed to use the iterator RTE_ETH_FOREACH_DEV.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
2018-04-18 00:25:27 +02:00
Radu Nicolau
0bb76fc945 examples/bond: check mbuf allocation
Coverity issue: 257008
Fixes: cc7e8ae84f ("examples/bond: add example application for link bonding mode 6")
Cc: stable@dpdk.org

Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
2018-02-01 01:20:37 +01:00
Radu Nicolau
e6509c6cbb examples/bond: fix vdev name
Fixes: 73db5bad ("net: align ethdev and eal driver names")
Cc: stable@dpdk.org

Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2018-01-31 20:57:29 +01:00
Kevin Laatz
867a6c66ec examples: increase default ring sizes to 1024
Increase the default RX/TX ring sizes to 1024/1024 to
accommodate for NICs with higher throughput (25G, 40G etc)

Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
2018-02-01 00:10:42 +01:00
Shahaf Shuler
c1b7778886 examples/bond: convert to new ethdev offloads API
Ethdev offloads API has changed since:

commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")

This commit support the new API.

Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Radu Nicolau <radu.nicolau@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
2018-01-16 18:47:49 +01:00
Bruce Richardson
3998e2a072 examples: use SPDX tag for Intel copyright files
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
2018-01-04 22:41:39 +01:00
Bruce Richardson
015f9489c4 examples: remove dependency on PCI
All PCI functionality should be hidden from apps via the PCI bus driver,
the EAL and individual device drivers. Therefore remove the inclusion of
rte_pci.h from sample apps.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
2017-11-07 21:55:36 +01:00
Thomas Monjalon
4c00cfdc0e remove useless memzone includes
The memzone header is often included without good reason.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-11-06 22:12:08 +01:00
Zhiyong Yang
f8244c6399 ethdev: increase port id range
Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.

Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.

release_17_11 and deprecation docs have been updated in this patch.

Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
2017-10-06 18:23:25 +02:00
Thomas Monjalon
b59069278b examples: remove duplicate includes
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
2017-07-16 17:30:25 +02:00
Roman Zhukov
60efb44f73 examples: adjust Rx and Tx descriptors to device limits
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
2017-07-08 18:47:00 +02:00
Jerin Jacob
98a7ea332b fix typos using codespell utility
Fixing typos across dpdk source code using codespell utility.
Skipped the ethdev driver's base code fixes to keep the base
code intact.

Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
2017-06-14 23:54:13 +02:00
Jeff Guo
60da774e6e examples: enable HW CRC strip by default
Since VF can not disable/enable HW CRC strip for non-DPDK PF drivers,
and kernel driver almost default enable that feature, if disable it in
example app's rxmode, VF driver will report the VF launch failure. So
this patch default to enable HW CRC strip to let VF launch successful.

Cc: stable@dpdk.org

Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
2017-04-10 22:36:37 +02:00
Amine Kherbouche
f03723017a remove unused ring includes
This patch removes all unused <rte_ring.h> headers.

Signed-off-by: Amine Kherbouche <amine.kherbouche@6wind.com>
2016-09-16 10:16:02 +02:00
Piotr Azarewicz
3ca530edd4 examples/bond: check thread termination
The example is calling rte_eal_wait_lcore without checking return value.
Now it is fixed by checking the value and print proper message.

Coverity issue: 37789, 37790
Fixes: cc7e8ae84f ("examples/bond: add example application for link bonding mode 6")

Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
2016-07-11 17:21:21 +02:00
Daniel Mrzyglod
56faae8269 examples/bond: fix FreeBSD build
Error:
examples/bond/main.c:431:24: error: use of undeclared identifier 'AF_INET'

AF_INET defined in sys/socket.h

This header included for Linux:
. /<snip>/include/rte_ip.h
.. /usr/include/netinet/in.h
... /usr/include/sys/socket.h

But not for FreeBSD:
. /<snip>/include/rte_ip.h
.. /usr/include/netinet/in.h
... /usr/include/machine/endian.h
... /usr/include/netinet6/in6.h
. /<snip>/include/rte_tcp.h

Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
2015-12-07 03:21:13 +01:00
Olivier Matz
4ae39dfa69 examples/bond: fix build with clang
Fix the following compilation error:

examples/bond/main.c:717:1: error: control reaches end of
  non-void function [-Werror,-Wreturn-type]

The prompt() function does not return anything, so fix its prototype
to be void.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
2015-05-19 17:35:33 +02:00
Konstantin Ananyev
824cb29c0e apps: fix default mbuf size
Latest mbuf changes (priv_size addition and related fixes)
exposed small problem with testpmd and few other sample apps:
when mbuf size is exaclty 2KB or less, that causes
ixgbe PMD to select scattered RX even for configs with 'normal'
max packet length (max_rx_pkt_len == ETHER_MAX_LEN).
To overcome that problem and unify the code, new macro was created
to represent recommended minimal buffer length for mbuf.
When appropriate, samples are updated to use that macro.

Fixes: dfb03bbe2b ("app/testpmd: use standard functions to initialize
mbufs and mbuf pool")

Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
2015-05-11 15:51:14 +02:00
Olivier Matz
ea0c20ea95 apps: use helper to create mbuf pools
When it's possible, use the new helper to create the mbuf pools.
Most of the patch is trivial, except for the following files that
have some specifics (indirect mbufs):
- ip_fragmentation
- ip_pipeline
- ipv4_multicast
- vhost

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2015-04-28 11:34:10 +02:00
David Marchand
ff708facfc tailq: remove unneeded inclusions
Only keep inclusion where really needed.

Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
2015-03-10 11:47:46 +01:00
Thomas Monjalon
4b1b380213 bond: remove debug function to fix link with shared lib
The function print_client_stats was used in the example without being
clearly exported in the map file. So it breaks linking with shared library
when debug is enabled.
It's better to remove this function as it probably could be implemented
with statistics API.

Fixes: cc7e8ae84f ("add example application for link bonding mode 6")

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
2015-03-04 11:19:25 +01:00
Michal Jastrzebski
cc7e8ae84f examples/bond: add example application for link bonding mode 6
This patch contains an example for link bonding mode 6.
It interact with user by a command prompt. Available commands are:
Start - starts ARP_thread which respond to ARP_requests and sends
ARP_updates (this
Is enabled by default after startup),
Stop  -stops ARP_thread,
Send count ip - send count ARP requests for IP,
Show - prints basic bond information, like IPv4 statistics from clients
Help,
Quit.
The best way to test mode 6 is to use this example together with
previous patch:
[PATCH 3/4] bond: add debug info for mode 6 link bonding.
Connect clients thru switch to bonding machine and send:
arping -c 1 bond_ip or
generate IPv4 traffic to bond_ip (IPv4 traffic from different clients
should be then balanced on slaves in round robin manner).

Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
2015-02-20 23:07:02 +01:00