This commit addresses a compilation issue against Glibc >= 2.25, which
implements assert() through a nonstandard ({ }) construct. Such constructs
can normally not be used without __extension__ keyword when -pedantic is
enabled, as is the case when compiling mlx4 and mlx5 PMDs in debug mode.
While assert.h checks for the compiler ability to support GNU extensions,
Clang, unlike GCC, does not allow the above syntax when combining
-std=gnu99 with -pedantic.
Work around missing keyword by moving these PMDs to a stricter compliance
standard without GNU extensions but properly checked by Glibc. Doing so is
supported on the DPDK side since includes have been cleaned up.
Even in C11, using types other than _Bool or signed/unsigned int for
bit-fields is an extension. Some GCC versions complain about that when
-pedantic checks are enabled.
The RTE_STD_C11 macro correctly prevented this issue with C99 but not with
C11 as it becomes a no-op. Forcing the extension keyword addresses it.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Tested-by: Yongseok Koh <yskoh@mellanox.com>
In 2 modes (802.3ad and TLB) of the link bonding driver, monitoring of
link status is used to determine the active slaves to use. These
functions are currently using the rte_link_link_get which could block
for up to 9 seconds, depending on the slave device.
In the 802.3ad periodic callback and in the TLB slave callback the
link status of slaves are checked using rte_eth_link_get function.
This patch changes to the no-wait version of the link get function to
avoid the possible issues which could be introduced if this call was
to block for an extended period of time.
Fixes: 46fb436836 ("bond: add mode 4")
Fixes: 7c76a747e6 ("bond: add mode 5")
Cc: stable@dpdk.org
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
In function i40e_vsi_config_tc_queue_mapping(), if 'enabled_tcmap' is 0,
'total_tc' might be 0. Then 'total_tc' might be used in a division
by 0 in "qpnum_per_tc = i40e_align_floor(vsi->nb_qps / total_tc)".
Fix it by changing 'total_tc' from 0 to 1 just as func
i40e_vsi_update_queue_mapping() does.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
In current implementation, when checking VF link state, PF state
is checked too, although the function has a parameter to tell
if PF state checking is needed.
But in some scenario, user may not care about the PF state.
This patch enables the unused parameter to only check the VF
link state.
Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Repairs a bug in the stats_reset where the wrong queue was
being passed into Tx reset.
Fixes: 727b3fe292 ("net/ark: integrate PMD")
Cc: stable@dpdk.org
Signed-off-by: John Miller <john.miller@atomicrules.com>
This change allows a user extension to provide unique private
callback data for all ports.
Arkville is a single-function multi-port device. User_data resides
in the singleton Arkville structure. This structure is shared across
all ports.
With this patch, we are providing a unique user pointer for each port
rather than a common pointer across multiple ports.
Signed-off-by: John Miller <john.miller@atomicrules.com>
Use port type to determine the supported speed capabilities.
Fixes: e274f57322 ("ethdev: add speed capabilities")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
When starting a vmxnet3 device, it is always writing the permanent MAC
address, even if a different MAC address was configured. Write from
the device data instead which holds the current one.
Signed-off-by: George Wilkie <gwilkie@brocade.com>
Acked-by: Shrikrishna Khare <skhare@vmware.com>
Make vmxnet3_process_events less noisy by removing logging when there
are no events to process and by making link, device-change and debug
events DEBUG level rather than ERR.
Change these to use PMD_DRV_LOG instead of PMD_INIT_LOG since they
don't happen at device init.
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Acked-by: Shrikrishna Khare <skhare@vmware.com>
Generate link-state change notifications by listening to interrupts
generated by the device. Make use of the existing
vmxnet3_process_events function that was compiled out, but change it
to call vmxnet3_dev_link_update on a VMXNET3_ECR_LINK event and to not
be so noisy in its log messages.
Enable interrupts on starting the device, using a new helper function,
vmxnet3_enable_intr, based on vmxnet3_disable_intr and validated
against the FreeBSD driver.
Keep track of the number of interrupts registered for to avoid
hardcoding these in vmxnet3_enable/disable_intr and to provision for
any future rxq intr support.
Factor out the guts of vmxnet3_dev_link_update minus the started check
to allow the new function to be called from vmxnet3_dev_start in the
lsc-enabled case to ensure that the link state is correctly set from
the actual state at that point.
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Implement xstats_get() to allow a number of driver-specific Tx and Rx
stats to be retrieved.
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Acked-by: Shrikrishna Khare <skhare@vmware.com>
Most NICs like virtio, igb/ixgbe etc. don't reset counters on
dev_start and arguably this helps in monitoring the counters
across a longer time span with multiple device start/stops.
vmxnet3 behavior is opposite to that and counters are reset by
the host side implementation each time the device is restarted.
Change the driver to save the counters in its private context
before it is reset by writing CMD_ACTIVATE to REG_CMD.
Signed-off-by: Nachiketa Prachanda <nprachan@brocade.com>
Acked-by: Shrikrishna Khare <skhare@vmware.com>
When exiting a DPDK application, the TAP remote was left
with the link down even if it was initially up.
The device flags of the remote netdevice are saved when probing,
and restored when calling the close function.
The remote state is not set down when calling the stop function anymore.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
New command 'ddp del (port) (profile_path)' removes previously
loaded profile and deletes it from the list of the loaded profiles.
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch adds ability to remove already loaded profile
or write profile without registering it
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
TPID can be set by set_switch_config aq, change the TPID setting
by set_switch_config on new FW release.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds extended processing of DDP packages:
- Execution of adminq command sections to support AQ-depended profiles,
for example, for programming cloud filters types.
- Ability to write a profile without registering it in the list of
applied profiles, to be used for AQ-depended profiles.
- Profile rollback is implemented to support restoration of original
parser/analyzer configuration without the need of core reset,
for example, for deploying new profile without resetting device.
- Search for a specific section in a profile, to be used by driver
to access metadata sections with description of PCTYPE/PTYPEs
defined in the profile.
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
This patch allows detection of upcoming core reset in case NIC gets
stuck while performing FLR reset. The i40e_pf_reset() function returns
I40E_ERR_NOT_READY when global reset was detected.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Instead of accessing register directly, use newly added AQC in
order to blink LEDs. Introduce and utilize a new flag to prevent
excessive API version checking.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Adds double VLAN tagging ethertype fields to Set Switch Parameters AQ
command. These were added in firmware API 1.7.
Callers of i40e_aq_set_switch_config() can specify the ethertypes to
use by filling out the corresponding fields in struct i40e_hw.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds new phy types for 25G Active Optical Cables (AOC) and
Active Copper Cables (ACC) support.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Store information about FEC modes, that were requested. It will be used
in printing link status information function and this way there is no
need to call admin queue there.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
During NVMupdate, state machine gets into unrecoverable state because
i40e_clean_adminq_subtask can get scheduled after the admin queue
command but before other state variables are updated.
This patch adds locking around admin queue command and update of
state variables so that adminq_subtask will have accurate information
whenever it gets scheduled.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Modify the necessary files to be compatible with the new virtchnl.h file
instead of relying on i40e_virtchnl.h variant. This mostly changes
references to VIRTCHNL_ variables by removing prefix of I40E_.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
According to the standard, state machine of LACP should transmit lacpdu
when partner's state changes from slow to fast, rather than from fast
to slow.
Fixes: 46fb436836 ("bond: add mode 4")
Cc: stable@dpdk.org
Signed-off-by: Sha Zhang <zhangsha.zhang@huawei.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
When a port is using a bogus SFP, the PCI probing returns an error,
preventing to register a portid.
To give a better chance to the applications to retry after the SFP is
changed, move this check in eth_i40e_dev_configure(), so that only a
port reconfiguration is needed to retry.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Cleanup the DMA map logic for memsegs. Earlier, in case
DMA mapping reaching end of segment, it reports a spurious error.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Correct the while condition for cleanup in case of failure.
Fixes: a0d5c9caf0 ("bus/fslmc: add frame queue based dq storage")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
changing the NXP DPDK helper repository from helper to extras.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Configuring the MC FW to configure data alignment by default.
This help in improving performance for some of the platform variants.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
After adding a fdir rule for IPv6 with input set TC, IPv6 packets
with the specific TC can't be assigned the right queue.
The root cause is that TC is parsed wrongly, this patch fixes
TC parsing problem.
Fixes: 7d83c152a2 ("net/i40e: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Fm10k host driver can't manage PHY directly and provides a fake link
status by always reporting LINK_UP. We should initialize link status
in device start, otherwise application will get LINK_DOWN status
when LSC configured.
Fixes: 9ae6068c86 ("fm10k: add dev start/stop")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
