Add support to generate ipad and opad for MD5.
Skip the call to additional command WRITE_SA during SA creation.
Instead use the software defined function to generate opad and ipad.
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Based on the hard limits configured in the SA context,
PMD passes corresponding event subtype to the application
to notify hard expiry event
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Removed unnecessary datapointer(DPTR) update and remove ESN update
from microcode command word 0 based on the latest microcode.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
In outbound inline case, use NIX Tx offset instead of
NIX Tx address for cn10kb as per new instruction format.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Fix later skip to include mbuf priv data as mbuf->buf_addr
is populated based on calculation including per-mbuf priv area.
Fixes: 706eeae607 ("net/cnxk: add multi-segment Rx for CN10K")
Cc: stable@dpdk.org
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add support to override soft expiry poll frequency via devargs.
Also provide helper API to indicate reassembly support on a chip
and documentation for devargs that are already present.
Fixes: 780b9c8924 ("net/cnxk: support zero AURA for inline meta")
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Enabled the flag pmd_supports_disable_iova_as_pa in cnxk driver build
files as they work with IOVA as VA. Updated cn9k and cn10k soc build
configurations to disable the IOVA as PA build by default.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Presently, HW is programmed only to receive packets from LPB pool.
Making all packets received from LPB pool.
But, CNXK HW supports two pools,
- SPB -> packets with smaller size (less than 4K)
- LPB -> packets with bigger size (greater than 4K)
Patch enables multiple mempool capability, pool is selected based
on the packet's length. So, basically, PMD programs HW for receiving
packets from both SPB and LPB pools based on the packet's length.
This is achieved by enabling rx multiple mempool offload,
RTE_ETH_RX_OFFLOAD_MUL_MEMPOOL. This allows the application to send
more than one pool(in our case two) to the driver, with different
segment(packet) lengths, which helps the driver to configure both
pools based on segment lengths.
This is often useful for saving the memory where the application
can create a different pool to steer the specific size of the
packet, thus enabling effective use of memory.
Signed-off-by: Hanumanth Pothula <hpothula@marvell.com>
The rate parameter modified to uint32_t, so that it can work
for more than 64 Gbps.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
As announced in the deprecation note, remove the Rx offload flag
'RTE_ETH_RX_OFFLOAD_HEADER_SPLIT' and 'split_hdr_size' field from
the structure 'rte_eth_rxmode'. Meanwhile, the place where the examples
and apps initialize the 'split_hdr_size' field, and where the drivers
check if the 'split_hdr_size' value is 0 are also removed.
User can still use `RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT` for per-queue packet
split offload, which is configured by 'rte_eth_rxseg_split'.
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Using rte_mtr_color_in_protocol_set(), user can configure
combination of protocol headers, like outer_vlan and outer_ip,
can be enabled on given meter object.
But rte_mtr_meter_vlan_table_update() and
rte_mtr_meter_dscp_table_update() do not have information that
which table needs to be updated corresponding to protocol header
i.e. inner or outer.
Adding protocol paramreter will allow user to provide required
protocol information so that corresponding inner or outer table
can be updated corresponding to protocol header.
If user wishes to configure both inner and outer table then
API must be called twice with correct protocol information.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
As per current design, rte_security_session_create()
unnecessarily use 2 mempool objects for a single session.
To address this, the API will now take only 1 mempool
object instead of 2. With this change, the library layer
will get the object from mempool and session priv data is
stored contiguously in the same mempool object.
User need to ensure that the mempool created in application
is big enough for session private data as well. This can be
ensured if the pool is created after getting size of session
priv data using API rte_security_session_get_size().
Since set and get pkt metadata for security sessions are now
made inline for Inline crypto/proto mode, a new member fast_mdata
is added to the rte_security_session.
To access opaque data and fast_mdata will be accessed via inline
APIs which can do pointer manipulations inside library from
session_private_data pointer coming from application.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Tested-by: Gagandeep Singh <g.singh@nxp.com>
Tested-by: David Coyle <david.coyle@intel.com>
Tested-by: Kevin O'Sullivan <kevin.osullivan@intel.com>
The API rte_security_get_userdata() was being unused by most of
the drivers and it was retrieving userdata from mbuf dynamic field.
Hence, the API was removed and the application can directly get the
userdata from dynamic field. This helps in removing extra checks
in datapath.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
In vector mode, DF bit is not programmed correctly, as the
return value of vsetq_lane_u64() is ignored, which actually
contains the updated value, leading HW to free mbufs though
NIX_TX_OFFLOAD_MBUF_NOFF_F flag is set.
Hence, save return value of vsetq_lane_u64() appropriately so
that DF bit is programmed correctly.
Fixes: 862e281287 ("net/cnxk: add vector Tx for CN9K")
Fixes: f71b7dbbf0 ("net/cnxk: add vector Tx for CN10K")
Cc: stable@dpdk.org
Signed-off-by: Hanumanth Pothula <hpothula@marvell.com>
While configuring NIX, local variables 'nb_rxq' and 'nb_txq'
are declared as 8bit variables, leading to an integer overflow
when an application sends Rxq/Txq value greater than 255.
Hence, declare local variables, 'nb_rxq' and 'nb_txq' as 16bit
variable. Also, during the cleanup, make sure PFC tree is not created.
Fixes: b75e0aca84 ("net/cnxk: add device configuration operation")
Cc: stable@dpdk.org
Signed-off-by: Hanumanth Pothula <hpothula@marvell.com>
Remove L2 header update for outbound inline packets as
application is already taking care of the same.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
There has been support for similar action PORT_ID for
some time already, but this action will be deprecated.
Support action REPRESENTED_PORT before the transition.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add multi-seg support for Inline IPsec.
Also in reassembly, FI_PAD is not required to compute pointer to
Fragment info because it is only at CPT_PARSE_HDR_S + FI_OFFSET * 8
and is always 8B aligned.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Rahul Bhansali <rbhansali@marvell.com>
Enable ESN and anti-replay in IPsec capabilities
Add support for session update security API
Fix the CPT command population for ESN enabled case
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Limit port specific SA table size to 1 entry when not used.
This is useful when inline device is enabled as then
Port specific SA table will not be used for Inline IPsec
inbound processing.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Wait for CPT flow control on WQE path. This is to
avoid CPT queue overflow and thereby a CPT misc
interrupt.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Enable below ciphers and auths as part of capabilities for inline IPsec
AES_CTR, AES_XCBC_MAC, AES_GMAC.
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Add capabilities for HMAC_SHA2 and udp encap for 9k
security offload in inline mode.
Set explicit IV mode in IPsec context when IV is provided by the
application
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Use the Full context SA structures and command in IPsec fast path.
For inline outbound, populate CPT instruction as per full context.
Added new macros and functions with respect to full context.
Populate WQE ptr in CPT instruction with proper offset from mbuf.
Also add option to override outbound inline SA IV for debug
Update mbuf length based on IP version in Rx post process purposes
via environment variable.
User can set env variable as:
export ETH_SEC_IV_OVR="0x0, 0x0,..."
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add support for zero aura for inline meta packets and register
callback to ROC to create meta pool via mempool. Also
add devargs to override meta buffer count and size.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Similar to other RQ's, delay inline device RQ until dev is started
to avoid traffic reception when device is stopped.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Limit meta AURA workaround to CN10K A0.
Also other NIX and Inline related Erratas applicable for CN10K A1.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Fix missing FC wait for outbound path in vector mode.
Currently only poll mode has it.
Fixes: 358d02d20a ("net/cnxk: support flow control for outbound inline")
Cc: stable@dpdk.org
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add FC check in vector event Tx path, the check needs to be
performed after head wait right before LMTST is issued.
Since, SQB pool FC updates are delayed w.r.t the actual
utilization of pool add sufficient slack to avoid overflow.
Added a new device argument to override the default SQB slack
configured, can be used as follows:
-a 0002:02:00.0,sqb_slack=32
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add support to enable PTP per ethernet device when that
specific ethernet device is connected to event device via
Rx adapter.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Remove deprecated fdir_conf from device configuration.
Assume that mode is equal to RTE_FDIR_MODE_NONE.
Add internal Flow Director configuration copy in ixgbe and txgbe device
private data since flow API supports requires it. Initialize mode to
the first flow rule mode on the rule validation or creation.
Since Flow Director configuration data types are still used by some
drivers internally, move it from public API to ethdev driver internal
API.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Dongdong Liu <liudongdong3@huawei.com>
Do not include <ctype.h>, <errno.h>, and <stdlib.h> from <rte_common.h>,
because they are not used by this file.
Include the needed headers directly from the files that need them.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Start a new release cycle with empty release notes.
The ABI version becomes 23.0.
The map files are updated to the new ABI major number (23).
The ABI exceptions are dropped and CI ABI checks are disabled because
compatibility is not preserved.
Special handling of removed drivers is also dropped in check-abi.sh and
a note has been added in libabigail.abignore as a reminder.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This fix replaces the usage of roc_nix_num_xstats_get() which is compile
time RoC API with runtime RoC roc_nix_xstats_names_get() API resolving
xstat count difference for cn9k and cn10k while displaying xstats
for ethdev ports
Fixes: 825bd1d9d8 ("common/cnxk: update extra stats for inline device")
Cc: stable@dpdk.org
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Disabling a specific PFC class on a SQ is resulting in disabling PFC
on the entire port.
Fixes: 9544713564 ("net/cnxk: support priority flow control")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Current PFC implementation does not support VFs.
This patch enables PFC on VFs too.
Also fix the config of aura.bp to be based on number
of buffers(aura.limit) and corresponding shift
value(aura.shift).
Fixes: cb4bfd6e7b ("event/cnxk: support Rx adapter")
Cc: stable@dpdk.org
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
