When choosing a vector path to take, an extra condition must be
satisfied to ensure the max SIMD bitwidth allows for the CPU enabled
path.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Queue stats are stored in 'struct rte_eth_stats' as array and array size
is defined by 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag.
As a result of technical board discussion, decided to remove the queue
statistics from 'struct rte_eth_stats' in the long term.
Instead PMDs should represent the queue statistics via xstats, this
gives more flexibility on the number of the queues supported.
Currently queue stats in the xstats are filled by ethdev layer, using
some basic stats, when queue stats removed from basic stats the
responsibility to fill the relevant xstats will be pushed to the PMDs.
During the switch period, temporary 'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS'
device flag is created. Initially all PMDs using xstats set this flag.
The PMDs implemented queue stats in the xstats should clear the flag.
When all PMDs switch to the xstats for the queue stats, queue stats
related fields from 'struct rte_eth_stats' will be removed, as well as
'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS' flag.
Later 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag also can be
removed.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Change eth_dev_stop_t return value from void to int.
Make eth_dev_stop_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The function rte_eth_dev_release_port() is partially resetting
the struct rte_eth_dev. The drivers were completing this reset
with more pointers set to NULL in the close or remove operations.
More pointers are reset at ethdev level,
and some redundant assignments are removed from PMDs.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When closing a port, it is supposed to be already stopped,
and marked as such with "dev_started" state zeroed by the stop API.
Resetting "dev_started" before calling the driver close operation
was hiding the case of not properly stopped port being closed.
The flag "dev_started" is not changed anymore in "rte_eth_dev_close()".
In case the "dev_stop" function is called from "dev_close",
bypassing "rte_eth_dev_stop()" API,
the "dev_started" state must be explicitly reset in the PMD
in order to keep the same behaviour.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
RTE_ARCH_xx flags are used to distinguish platform architectures.
These flags can be used to pick different code paths for different
architectures at compile time.
For Arm platforms, there are 3 flags in use: RTE_ARCH_ARM,
RTE_ARCH_ARMv7 and RTE_ARCH_ARM64.
RTE_ARCH_ARM64 is for 64-bit aarch64 platforms,
and RTE_ARCH_ARM & RTE_ARCH_ARMv7 are for 32-bit platforms.
RTE_ARCH_ARMv7 is for ARMv7 platforms as its name suggested.
The issue is meaning of RTE_ARCH_ARM is not clear enough.
Because no info about platform word length is included in the name.
To make the flag names more clear, a naming scheme is proposed.
RTE_ARCH_ARM (all Arm platforms)
|
+----RTE_ARCH_32 (New. 32-bit platforms of all architectures)
| |
| +----RTE_ARCH_ARMv7 (ARMv7 platforms)
| |
| +----RTE_ARCH_ARMv8_AARCH32 (aarch32 state on aarch64 machine)
|
+----RTE_ARCH_64 (64-bit platforms of all architectures)
|
+----RTE_ARCH_ARM64 (64-bit Arm platforms)
RTE_ARCH_32 will be explicitly defined for 32-bit platforms.
To fit into the new naming scheme, current usage of RTE_ARCH_ARM in
project is mapped to (RTE_ARCH_ARM && RTE_ARCH_32).
Matching flags for other architectures are:
RTE_ARCH_X86
|
+----RTE_ARCH_32
| |
| +----RTE_ARCH_I686
| |
| +----RTE_ARCH_X86_X32
|
+----RTE_ARCH_64
|
+----RTE_ARCH_X86_64
RTE_ARCH_PPC_64 ---- RTE_ARCH_64
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Add packed indirect descriptors format into virtio Tx
region. When initializing vring, packed indirect
descriptors will be initialized if ring type is packed.
Fixes: bc80357cd677 ("net/virtio: drop unused field in Tx region structure")
Cc: stable@dpdk.org
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
ethdev library was updated with new speed 200G
Add 200G speed capa to virtio device
Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
rte_ethdev states new rule for NICs: they should return UNKNOWN
speed if speed is unknown and interface is up, in case of down
interface, NONE speed should be returned.
Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The secondary processes are not allowed to release shared resources.
Only process-private resources should be freed in a secondary process.
Most of the time, there is no process-private resource,
so the close operation is just forbidden in a secondary process.
After adding proper check in the port close functions,
some redundant checks in the device remove functions are dropped.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The temporary flag RTE_ETH_DEV_CLOSE_REMOVE is removed.
It was introduced in DPDK 18.11 in order to give time for PMDs to migrate.
The old behaviour was to free only queues when closing a port.
The new behaviour is calling rte_eth_dev_release_port() which does
three more tasks:
- trigger event callback
- reset state and few pointers
- free all generic port resources
The private port resources must be released in the .dev_close callback.
The .remove callback should:
- call .dev_close callback
- call rte_eth_dev_release_port()
- free multi-port device shared resources
Despite waiting two years, some drivers have not migrated,
so they may hit issues with the incompatible new behaviour.
After sending emails, adding logs, and announcing the deprecation,
the only last solution is to declare these drivers as unmaintained:
ionic, liquidio, nfp
Below is a summary of what to implement in those drivers.
* The freeing of private port resources must be moved
from the ".remove(device)" function to the ".dev_close(port)" function.
* If a generic resource (.mac_addrs or .hash_mac_addrs) cannot be freed,
it must be set to NULL in ".dev_close" function to protect from
subsequent rte_eth_dev_release_port() freeing.
* Note 1:
The generic resources are freed in rte_eth_dev_release_port(),
after ".dev_close" is called in rte_eth_dev_close(), but not when
calling ".dev_close" directly from the ".remove" PMD function.
That's why rte_eth_dev_release_port() must still be called explicitly
from ".remove(device)" after calling the ".dev_close" PMD function.
* Note 2:
If a device can have multiple ports, the common resources must be freed
only in the ".remove(device)" function.
* Note 3:
The port is supposed to be in a stopped state when it is closed.
If it is not the case, it is free to the PMD implementation
how to react when trying to close a non-stopped port:
either try to stop it automatically or just return an error.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The device operation .dev_close was returning void.
This driver interface is changed to return an int.
Note that the API rte_eth_dev_close() is still returning void,
although a deprecation notice is pending to change it as well.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
virtio 1.0 introduced a mechanism for the driver to verify that the
feature bits it sets are accepted by the device. This mechanism consists
in setting the VIRTIO_STATUS_FEATURE_OK status bit and re-reading it,
which gives a chance for the device to clear it if the features
were not accepted.
This is currently being done only in modern virtio-pci devices but since
the appropriate vhost-user messages have been added, it can also be done
in virtio-user (vhost-user only).
This patch activates this mechanism on virtio-user.
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
'_rte_eth_dev_callback_process()' & '_rte_eth_dev_reset()' internal APIs
has unconventional underscore ('_') prefix.
Although this is not documented most probably this is to mark them as
internal. Since we have '__rte_internal' flag to mark this, removing '_'
from API names.
For '_rte_eth_dev_reset()', there is already a public API named
'rte_eth_dev_reset()', so renaming '_rte_eth_dev_reset()' to
'rte_eth_dev_internal_reset'.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
This patch is a preparation to hide the 'struct eth_dev_ops' from
applications by moving some device operations from 'struct eth_dev_ops'
to 'struct rte_eth_dev'.
Mentioned ethdev APIs are in the data path and implemented as inline
because of performance reasons.
Exposing 'struct eth_dev_ops' to applications is bad because it is a
contract between ethdev and PMDs, not really needs to be known by
applications, also changes in the struct causing ABI breakages which
shouldn't.
To be able to both keep APIs inline and hide the 'struct eth_dev_ops',
moving device operations used in ethdev inline APIs to 'struct
rte_eth_dev' to the same level with Rx/Tx burst functions.
The list of dev_ops moved:
eth_rx_queue_count_t rx_queue_count;
eth_rx_descriptor_done_t rx_descriptor_done;
eth_rx_descriptor_status_t rx_descriptor_status;
eth_tx_descriptor_status_t tx_descriptor_status;
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Introduce the RTE_LOG_REGISTER macro to avoid the code duplication
in the logtype registration process.
It is a wrapper macro for declaring the logtype, registering it and
setting its level in the constructor context.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Runtime checks for vectorized datapath are organized into device
configuration function. Remove duplicated check in device init
function.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The AVX512 packed ring datapath selection was only done
at build time, but it should also be checked at runtime
that the CPU supports it.
This patch add a CPU flags check so that non-vectorized
path is selected at runtime if AVX512 is not supported.
Also in meson build enable vectorization only for relevant file, not for
all driver.
Fixes: ccb10995c2ad ("net/virtio: add election for vectorized path")
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
In case VIRTIO_F_ORDER_PLATFORM(36) is not negotiated, then the frontend
and backend are assumed to be implemented in software, that is they can
run on identical CPUs in an SMP configuration.
Thus a weak form of memory barriers like rte_smp_r/wmb, other than
rte_cio_r/wmb, is sufficient for this case(vq->hw->weak_barriers == 1)
and yields better performance.
For the above case, this patch helps yielding even better performance
by replacing the two-way barriers with C11 one-way barriers for used
index in split ring.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Rewrite vectorized path selection logic. Default setting comes from
vectorized devarg, then checks each criteria.
Packed ring vectorized path need:
AVX512F and required extensions are supported by compiler and host
VERSION_1 and IN_ORDER features are negotiated
mergeable feature is not negotiated
LRO offloading is disabled
Split ring vectorized rx path need:
mergeable and IN_ORDER features are not negotiated
LRO, chksum and vlan strip offloadings are disabled
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Previously, virtio split ring vectorized path was enabled by default.
This is not suitable for everyone because that path does not follow
virtio spec. Add new devarg for virtio vectorized path selection. By
default vectorized path is disabled.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch adds a support of VIRTIO_NET_F_SPEED_DUPLEX feature
for virtio driver.
There are two ways to specify speed of the link:
'speed' devarg
negotiate speed from qemu via VIRTIO_NET_F_SPEED_DUPLEX
The highest priority is devarg. If devarg is not specified,
drivers tries to negotiate it from qemu.
Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Some applications like pktgen use link speed to calculate
transmission rate. It limits outcome traffic to hardcoded 10G.
This patch adds speed devarg which allows to configure
link speed of virtio device.
Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Refactor vdpa specific devargs parsing to more generic way.
Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Fix comment that is no more correct as the code evolved.
Fixes: 9470427c88e1 ("net/virtio: do not store PCI device pointer at shared memory")
Cc: stable@dpdk.org
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch fixes the situation where data path does not work properly
when vhost reconnects to virtio in server mode with packed ring.
Currently, virtio and vhost share memory of vring. For split ring, vhost
can read the status of descriptors directly from the available ring and
the used ring during reconnection. Therefore, the data path can
continue.
But for packed ring, when reconnecting to virtio, vhost cannot get the
status of descriptors via the descriptor ring. By resetting Tx
and Rx queues, the data path can restart from the beginning.
Fixes: 4c3f5822eb21 ("net/virtio: add packed virtqueue defines")
Cc: stable@dpdk.org
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Virtio spec only set rule that packed ring maximum size is up to 2^15
entries. Should not limit packed ring size to power of two.
Fixes: aea29aa5d37b ("net/virtio: enable packed virtqueues by default")
Cc: stable@dpdk.org
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This driver supports none of DCB or VMDQ modes, therefore must
check and return error if configured incorrectly.
Fixes: c1f86306a026 ("virtio: add new driver")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This driver supports none of DCB, RSS or VMDQ modes, therefore must
check and return error if configured incorrectly.
Virtio can distribute Rx packets across multi-queue, but there is
no controls (algorithm, redirection table, hash function) except
number of Rx queues and ETH_MQ_RX_NONE is the best fit meaning
no method is enforced on how to route packets to MQs.
Fixes: c1f86306a026 ("virtio: add new driver")
Cc: stable@dpdk.org
Signed-off-by: Dilshod Urazov <dilshod.urazov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
On x86, iopl permissions are only available to root user (or users that
have the CAP_SYS_RAWIO capability).
But those permissions are only needed when the virtio devices accesses
are done with inb/outb instructions, which is when the device is bound
to a UIO kernel module.
So far, the virtio driver was refusing to register based on the check
on IO permissions.
This check does not make sense when binding the device to vfio.
Now that the check on IO permissions has been abstracted in the ioport
API, we can remove it on virtio side.
We still need to call rte_eal_iopl_init() in the virtio constructor so
that the interrupt thread inherits this permission in the case it could
be used with UIO later.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Tiwei Bie <tiwei.bie@intel.com>
Enabling/disabling of allmulticast mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change return value of the callbacks from void to int. Make
implementations across all drivers return negative errno
values in case of error conditions.
Both callbacks are updated together because a large number of
drivers assign the same function to both callbacks.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Enabling/disabling of promiscuous mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change eth_dev_infos_get_t return value from void to int.
Make eth_dev_infos_get_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This Tx counter has never been used.
Fixes: 9658d17da27b ("virtio: maintain stats per queue")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Replace rte_intr_enable() with rte_intr_ack() API
for acking an interrupt in interrupt handlers and
rx_queue_intr_enable() callbacks of PMD's.
This is inline with original intent of this change in PMDs
to ack interrupts after handling is completed if
device is backed by UIO, IGB_UIO or VFIO(with INTx).
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Shahed Shaikh <shshaikh@marvell.com>
Tested-by: Shahed Shaikh <shshaikh@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Virtio requires pseudo-header checksum in TCP/UDP checksum to do
offload, but it was lost when Tx prepare is introduced. Also
rte_validate_tx_offload() should be used to validate Tx offloads.
Also it is incorrect to do virtio_tso_fix_cksum() after prepend
to mbuf without taking prepended size into account, since layer 2/3/4
lengths provide incorrect offsets after prepend.
Fixes: 4fb7e803eb1a ("ethdev: add Tx preparation")
Cc: stable@dpdk.org
Signed-off-by: Dilshod Urazov <dilshod.urazov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Set RTE_ETH_DEV_CLOSE_REMOVE upon probe so all the private
resources for the port can be freed by rte_eth_dev_close().
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
We should unmap the device when we failed to initialize the device.
Fixes: 6ba1f63b5ab0 ("virtio: support specification 1.0")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
For legacy devices, we should also unmap the port IO
resource on device removal.
Fixes: b8f04520ad71 ("virtio: use PCI ioport API")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
We should free queues when we failed to initialize the virtio device.
Fixes: 26b683b4f7d0 ("net/virtio: setup Rx queue interrupts")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When eth_virtio_dev_init() is cleaning up, it does not correctly set
the mac_addrs variable to NULL, which will lead to a double free.
Found during unit-test fixes.
Fixes: 43d18765c027 ("net/virtio: fix memory leak on failure")
Cc: stable@dpdk.org
Reported-by: Michael Santana <msantana@redhat.com>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
We are consistently passing 1 as the argument in the data path,
so there is no need to define avail/used flags as function-like
macros anymore. This patch changes the avail and used flags to
constants. And a frequently used combination is also introduced.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch fixes the multi-process support for virtio-user.
Currently virtio-user just provides some limited secondary
process supports. Only some basic operations can be done in
secondary process on virtio-user port, e.g. getting port stats.
Actions which will trigger the communication with vhost backend
can't be done in secondary process for now, as the fds are
not synced between processes. The processing of server mode
devargs is also moved into virtio_user_dev_init().
Fixes: cdb068f031c6 ("bus/vdev: scan by multi-process channel")
Fixes: ee27edbe0c10 ("drivers/net: share vdev data to secondary process")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add a helper for sending commands in split ring to make the
code consistent with the corresponding code in packed ring.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Drop the unused field tx_indir_pq from virtio_tx_region
structure.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
