Use the ptt[PF translation table] handler that is passed rather than using
main ptt from the HW function.
In ecore_hw_get_resc()'s error flow, release the MFW generic resource lock
only if needed.
Change the verbosity level of GRC timeout from DP_INFO() to DP_NOTICE().
Reduce verbosity of print in ecore_hw_bar_size().
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Status Block reallocation - allow a PF and its child VF to change SB
between them using new base driver APIs.
The changes that are inside base driver flows are:
New APIs ecore_int_igu_reset_cam() and ecore_int_igu_reset_cam_default()
added to reset IGU CAM.
a. During hw_prepare(), driver would re-initialize the IGU CAM.
b. During hw_stop(), driver would initialize the IGU CAM to default.
Use igu_sb_id instead of sb_idx [protocol index] to allow setting of
the timer-resolution in CAU[coalescing algorithm unit] for all SBs,
sb_idx could limit SBs 0-11 only to be able change their timer-resolution.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Allow opening Multiple Tx queues on a single qzone for VFs.
This is supported by Rx/Tx TLVs now having an additional extended TLV that
passes the `qid_usage_idx', a unique number per each queue-cid that was
opened for a given queue-zone.
Fix to overcome TX timeout issue due to more than 16 CIDs by adding an
additional VF legacy mode. This will detach the CIDs from the original
only-existing legacy mode suited for older releases.
Following this change, only VFs that would publish VFPF_ACQUIRE_CAP_QIDS
would have the new CIDs scheme applied. I.e., the new 'legacy' mode is
actually whether this capability is published or not.
Changed the logic to clear doorbells for legacy and non-legacy VFs, so
the PF is cleaning the doorbells for both cases.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Move ecore_crc32() macro to within base driver to qede_crc32() and use
OSAL_CRC32() where required.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
A step toward having multi-Txq support on same queue-zone for VFs.
This change takes care of:
- VFs assume a single CID per-queue, where queue X receives CID X.
Switch to a model similar to that of PF - I.e., Use different CIDs
for Rx/Tx, and use mapping to acquire/release those. Each VF
currently will have 32 CIDs available for it [for its possible 16
Rx & 16 Tx queues].
- To retain the same interface for PFs/VFs when initializing queues,
the base driver would have to retain a unique number per-each queue
that would be communicated in some extended TLV [current TLV
interface allows the PF to send only the queue-id]. The new TLV isn't
part of the current change but base driver would now start adding
such unique keys internally to queue_cids. This would also force
us to start having alloc/setup/free for L2 [we've refrained from
doing so until now]
The limit would be no-more than 64 queues per qzone [This could be
changed if needed, but hopefully no one needs so many queues]
- In IOV, Add infrastructure for up to 64 qids per-qzone, although
at the moment hard-code '0' for Rx and '1' for Tx [Since VF still
isn't communicating via new TLV which index to associate with a
given queue in its queue-zone].
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
L2 handler changes:
This is change to remove the queue-id/qzone difference for Tx queues.
It does that by mainly doing:
a. VFs queues are no longer determined by the SBs they're using.
Instead, the ecore-client needs to maintain those and choose the values
to be used by VF when initializing it.
b. Eliminate the HW-cid array in the hw-function.
To do that, have all the rx/tx functionality turn into 'handle' base -
when queue would be started the caller would get a (void*) handle,
which it would later use with ecore for configuring various
queue-related stop [update, close].
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Allow only trusted VFs to be promisc/multi-promisc. The reasonable
thing is to use the 'trusted' node instead of simply allowing VFs to
become promiscuous.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
This change is in preparation to work with new FW 8.18.9.0.
Rename the defines to use E4_ and structs to use e4_. This renaming
is to add support for future chipsets.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Typo in ecore_sriov.c; Ending line with , instead of ;
Fixes: 379cbb2c446a ("net/qede/base: semantic change")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
When a server doesn't support ARI, VF offsets begin at a much higher
number. As a result, ecore miscalculates the first_vf_in_pf and
initialization fails since base driver incorrectly learns there are
no SBs for its VF [as its VFs are out of range].
Fixes: 22d07d939c3c ("net/qede/base: update")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Set pointers to NULL after freeing the allocations. Change OSAL_FREE
macro to take care of this and cleanup relevant code.
Fixes: 26ae839d06e9 ("qede: add DCBX support")
Fixes: ec94dbc57362 ("qede: add base driver")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add support for 8.14.x.x firmware.
The new firmware adds support for external PHY BCM8485x; configures
fixed link speed with transceiver/cable not supporting negotiation;
supports engine swap; supports overriding PCIe preset equalization
value; checks pause too long for ports and reads die temperature
every second for shutdown threshold.
It includes change in FLR flow when there is a SW initiated FLR.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Receive indication that VFs are malicious and pass it to the
caller/clients and stop serving those VF's additional resource requests.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add a check and fail the VF's probe request if VF is already in
VF_ACQUIRED state.
Fixes: 22d07d939c3c ("net/qede/base: update")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Rx queue access is still done prior to the index being validated by PF.
Hence move Rx queue and status block validation check before accessing
Rx queue to prevent malicious VFs from using out-of-bound queue indices.
Fixes: 98bc693e1938 ("net/qede/base: change queue start")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Remove unmeaningful function ID value in print.
Don't print the number of Multicast filters as part of Acquire response,
as this is an obsolete field which isn't enforced by PF.
Fixes: 86a2265e59d7 ("qede: add SRIOV support")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
This patch updates the base driver and incorporates necessary changes
required to bring in the new firmware 8.10.9.0.
In addition, it would allow driver to add new functionalities that might
be needed in future.
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Some 64-bit variables are printed for debug.
%PRIx64 qualifier must be used because %lx is not long enough
on 32-bit systems
Fixes: ec94dbc57362 ("qede: add base driver")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Harish Patil <harish.patil@qlogic.com>
