Read the GLGEN_CLKSTAT_SRC register to determine which PSM clock
frequency is selected. This ensures that the rate limiter profile
calculations will be correct.
Fixes: 453d087ccaff ("net/ice/base: add common functions")
Cc: stable@dpdk.org
Signed-off-by: Ben Shelton <benjamin.h.shelton@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
ice_add_mac_rule allow user to add rule to port based on
hw->port_info->lport number. Function in some case should
allow user to add filter rule on different port, write
another function which implemented that behaviour.
The same situation is which removing mac function.
Add new API function which allow user to choose port on which
rule going to be added. Leave add mac rule function that always
add rule on hw->port_info->lport to avoid changes in components
which don't need to choose different port. Also add function to
remove rule from specific port.
Alloc more switch_info structs to track separately rules for each
port. Choose switch_info struct basing on logic port number
because in FW added rules are connected with port.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Increase the maximum time that the driver will wait for a PF reset
from 200 milliseconds to 300 milliseconds, to account for possibility
of a slightly longer than expected PF reset.
Fixes: 453d087ccaff ("net/ice/base: add common functions")
Cc: stable@dpdk.org
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
When RDMA is not enabled, when checking for completion of a CORER or
GLOBR do not wait for the PE unit to be loaded (indicated by GLNVM_ULD
register's PE_DONE bit being set) since that does not happen and will
cause issues such as failing to initialize the device.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
The pointer cmd is set to an address of a structure, which can never be
NULL. Remove the check-for-NULL lines since it's dead code anyway.
Signed-off-by: Jeb Cramer <jeb.j.cramer@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Remove unused code.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Remove redundant empty lines
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Removing Rx flex descriptor metadata and flag programming from the code,
these registers cannot be written to as they are read only.
The programming for all fields per RxDID is now handled differently.
Signed-off-by: Vignesh Sridhar <vignesh.sridhar@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add AQC get link topology handle support. This is needed to determine
Direct Attach (DA) or backplane media type for PHY types that support
either. Get link topology handle cage node type request can be used to
determine if a cage is present or not. If a cage is present for PHY
types that supports both DA and backplane media type, then the media
type is DA, else the media type is backplane.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Correct abbreviation issues found by running abbrevcheck.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
This function is needed by the driver to move PSM leaf nodes to a new
parent.
Additionally, add struct ice_aqc_move_txqs to struct ice_aq_desc so
driver code can access it.
Signed-off-by: Ben Shelton <benjamin.h.shelton@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
The driver detects and warns about FW rollback mode before getting the NVM
version (through ice_init_nvm) which results in "0.00 0x0 0.0.0" being
printed. Fix this by calling ice_init_nvm earlier.
This could have been fixed by moving ice_print_rollback_msg as well, but
it made more sense to move ice_init_nvm closer to the flow that gets the
FW version information (i.e. control queue init flow).
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
The GLV_REPC register contains statistics for tracking received packets
that are discarded due to certain errors.
This register behaves differently from some of the other related
statistics registers in two ways. First, it contains two 16bit
statistics, and thus cannot be read as a 32bit or 40bit statistic.
Second, the two stats do not roll over, but instead cap at 0xFFFF.
Add a new ice_stat_update_repc function which will read the register and
increment the appropriate statistics in the ice_eth_stats structure.
Since the register does not roll over, make use of the "Write Clear"
behavior, and write to the register to reset it every time we read it.
Add extra space for the two statistics that are counted by this
register, rx_errors, and rx_no_desc.
For now, wrap the new function and stats counters in !LINUX_SUPPORT.
This can later be removed if and when the Linux driver implements
support for reading the statistics.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add additional functions to aide in caching PHY
configuration. In order to cache the initial modes,
we need to determine the operating mode based on
capabilities. Add helper functions for flow control
and FEC to take a set of capabilities and return the
operating mode matching those capabilities. Also add
a helper function to determine whether a PHY capability
matches a PHY configuration.
Introduce a mask for valid link speeds and unwrap
ice_copy_caps_to_cfg() for more builds so that we can utilize
it in more places.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
The dynamic device personalization (DDP) file download onto the device
can fail, and when this happens the driver has to transition to "safe
mode" where only basic functionality is possible.
The device though doesn't understand safe mode, and so the opcodes to
discover device/function capabilities (0x000A and 0x000B) return all
the capabilities of the device, which includes capabilities that the
driver cannot support when in safe mode.
The initialization flows in the driver are based on the capabilities
information (obtained by the driver with the above mentioned opcodes).
To reuse the same initialization flows in safe mode, it becomes
necessary for the driver to override the currently stored capabilities
information with safe mode capabilities. This is done by a new function
introduced in this patch - ice_set_safe_mode_caps.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Improve debug print message.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
read/write module eeprom on i2c bus.
Signed-off-by: Scott W Taylor <scott.w.taylor@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Remove firmware logging debug code.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
correct argument pi(port_info) passed in function
ice_sched_get_first_node(), otherwise it will return the incorrect
node.
functions ice_sched_get_agg_node and ice_sched_cfg_sibl_node_prio:
change argument from hw to pi for it to align to correct port.
Moved saving tc node bw info from hardware structure(hw) to port info
structure(pi). This change allows multiple ports to save and replay
the information correctly.
Signed-off-by: Tarun Singh <tarun.k.singh@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
New support function added - ice_get_pfa_module_tlv(), the driver or
other modules can make use of this function to read the pfa area.
Signed-off-by: Tarun Singh <tarun.k.singh@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Store the number of functions the device has. This value can be
very useful when calculating how to best allocate global resources.
Signed-off-by: Kevin Scott <kevin.c.scott@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add new switch cases to init RXDID descs MD fields.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
This patch adds code to detect NVM rollback. The rollback detection
is done as part of the HW init flow. When NVM rollback is detected,
a warning message is printed along with the FW/NVM version data.
To do this, this patch adds a helper function ice_get_nvm_version.
Also, a pointer to hw->nvm is already available in ice_init_nvm. Just use
this instead of &hw->nvm.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add a helper function to get FW mode. The FW mode can be normal,
debug, recovery or rollback.
This makes ice_is_fw_in_rec_mode redundant, so remove it.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Cleanup hardware registers macros in ice_auto_generator.h.
Fixes: 51c7f09f3f81 ("net/ice/base: add registers for Intel E800 Series NIC")
Cc: stable@dpdk.org
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
use __func__ instead of function name in ice_debug calls.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add internal usage flag, bit 91 as described in spec.
Update width of internal queue state to 122 also as described in spec.
Signed-off-by: Ashish Shah <ashish.n.shah@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
According to recent specification versions, the field in the Queue
Shutdown AdminQ command consisting of the "driver unloading" indication
is not a 4 byte field (it is byte.bit 16.0). Change it to a byte and
remove the unnecessary endian conversion.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Modify ice_stat_update40 to use rd64 instead of two calls to rd32.
Additionally, drop the now unnecessary hireg function parameter.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
1. Do not unnecessarily initialize local variable.
2. Cleanup ice_update_link_info.
3. Don't clear auto_fec bit in ice_cfg_phy_fec.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
To make sure that we don't reuse the same result index
which is already in use, for chaining some other recipe.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
With the current NVM, after GLOBR, before the first link up event, FW
will return to base driver, the pacing value of 20 percents for some
reason, in the get-link-status AQ command. We then use this value as
the pacing param for the set-mac-info AQ command. As result, we are
limited to 20 percents of the available bandwidth until the first
set-mac-info AQ call after the link up event.
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Currently we are always setting prefena to 0. This is causing the
hardware to only fetch descriptors when there are none free in the cache
for a received packet instead of prefetching when it has used the last
descriptor regardless of incoming packets.
Fix this by allowing the hardware to prefetch Rx descriptors.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Replace the use of the ICE_DBG_AQ_MSG bit when dumping firmware logging
messages with a separate distinct type ICE_DBG_FW_LOG. This is useful
so that developers may enable ICE_DBG_FW_LOG and get firmware logging
messages, without also dumping AdminQ messages at the same time.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
On devices with more than 4 ports, the maximum number of TCs per port is
limited to 4.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch makes a change to add a "func cap" prefix when printing
function capabilities, and a "dev cap" prefix when printing device
capabilities.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Adding missing debug logs and fixing existing debug logs.
Signed-off-by: Marta Plantykow <marta.a.plantykow@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The ice_init_all_ctrlq and ice_shutdown_all_ctrlq functions create and
destroy the locks used to protect the send and receive process of each
control queue.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The ice_debug_cq function is only called from ice_controlq.c, and has no
other callers outside of that file. Move it and mark it static to avoid
namespace pollution.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In order to initialize the current status of the FW logging,
the api ice_get_fw_log_cfg is added. The function retrieves
the current setting of the FW logging from HW and updates the
ice_hw structure accordingly.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
1. Separated the calls to initialize and allocate the HW XLT tables
from call to fill table. This is to allow the ice_init_hw_tbls call
to be made prior to package download so that all HW structures are
correctly initialized. This will avoid any invalid memory references
if package download fails on unloading the driver.
2. Fill HW tables with package content after successful package download.
3. Free HW table and flow profile allocations when unloading driver.
4. Add flag in block structure to check if lists in block are
initialized. This is to avoid any NULL reference in releasing flow
profiles that may have been freed in previous calls to free tables.
Signed-off-by: Vignesh Sridhar <vignesh.sridhar@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
After the transition from cable-unplug to cable-plug events, FW will
clear the set-phy-cfg data, sent by user. Thus, we will need to
cache these info.
1. The submitted data when set-phy-cfg is called. This info will be used
later to check if FW clears out the PHY info, requested by user.
2. The FC, FEC and LinkSpeed, requested by user. This info will be used
later, by device driver, to construct the new input data for the
set-phy-cfg AQ command.
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Added code to save the queue bandwidth information when it is applied
and it is replayed when queue is re-enabled again. Earlier saved value
is used for replay purpose.
Added vsi_handle, tc, and q_handle argument to the ice_cfg_q_bw_lmt,
ice_cfg_q_bw_dflt_lmt.
Signed-off-by: Tarun Singh <tarun.k.singh@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The driver must send its version information to the firmware, so
the firmware knows the driver is up. Otherwise, it will cause unexpected
OS package downloading when multiple driver instances running on the
same device.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Revert the workaround for allocating TCAM and FV entries to align
with latest firmware.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. Add call to replay RSS configurations
2. Add RSS configurations to end of list and not the head to avoid
inversion on replay.
Signed-off-by: Vignesh Sridhar <vignesh.sridhar@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add flow director related support base code.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add module to support DCB related features.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Code added to check the FW recovery mode. This function will be
used by the drivers during init to check whether the FW is in
recovery mode or not. If FW is in recovery mode then the drivers
need to run in a recovery mode where it can allow only limited
operations. Link should be down, allow only certain AQ commands
etc.
Signed-off-by: Victor Raj <victor.raj@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
