The include file should not change the GCC compile options for
the whole file being compiled, but only for the one inline function
that needs it. Using the push_options/pop_options fixes this.
Signed-off-by: Stephen Hemminger <shemming@brocade.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The argument to rte_jhash2() is not changed.
Signed-off-by: Stephen Hemminger <shemming@brocade.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
rte_pktmbuf_attach copies the packet meta data but does not
copy the offload flags. This means that cloned packets lose
their offload settings such as vlan tag.
Signed-off-by: Stephen Hemminger <shemming@brocade.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
In order to distinguish clearly this implementation from the extension
vmxnet3-usermap, it is renamed to reflect its usage of uio framework.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Thomas Graf <tgraf@redhat.com>
Since commit 10ed994 (pci: use igb_uio mapping only when needed),
the flag RTE_PCI_DRV_NEED_IGB_UIO must be set even if RTE_EAL_UNBIND_PORTS
is disabled.
It was not the case for virtio_uio and vmxnet3_uio so the uio resources were
not mapped when RTE_EAL_UNBIND_PORTS was not defined.
Specifically, pci_uio_map_resource() was not called so
pci_dev->mem_resource was not mapped.
Signed-off-by: Daniel Kan <dan@nyansa.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
When not using vmxnet3-uio and virtio-uio PMDs, prevent igb_uio from binding
these devices. This way, vmxnet3 and virtio PMDs won't fail to initialize
because of a device silently bound to igb_uio.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
In order to distinguish clearly this implementation from the extension
virtio-net-pmd, it is renamed to reflect its usage of uio framework.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Chris Wright <chrisw@redhat.com>
In order to make this tool available among other system commands,
the name must be more specific.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Chris Wright <chrisw@redhat.com>
Insert get_physaddr() into public API as rte_mem_virt2phy().
rte_mem_virt2phy() permits to obtain the physical address of any
virtual address mapped to the current process.
get_physaddr() was working only for addresses pointing exactly to
the first byte of a page.
Note that this function is very slow and shouldn't be called
after initialization to avoid a performance bottleneck.
The memory must be locked with mlock(). The function rte_mem_lock_page()
is a mlock() helper that lock the whole page.
A better name would be rte_mem_virt2phys but rte_mem_virt2phy is more
consistent with rte_mempool_virt2phy.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This reverts commit 57c24af85d
which was wrongly rebased in 1.6.0 branch:
- commit log must be changed for 1.6.0
- it breaks building for 32-bit
A new version of this commit has to be done.
The initial commit doesn't build for 32-bit:
8ea9ff83 (mem: allow virtual memory address hinting)
lib/librte_eal/linuxapp/eal/eal.c: In function ‘eal_parse_base_virtaddr’:
build/include/rte_common.h:133:22:
error: cast from pointer to integer of different size
[-Werror=pointer-to-int-cast]
RTE_PTR_ALIGN_FLOOR((typeof(ptr))RTE_PTR_ADD(ptr, (align) - 1), align)
^
RTE_PTR_ALIGN_CEIL return type is the same as what we give it as input.
So instead of casting the returned value, cast 'addr' which should be the same
as base_virtaddr.
Reported-by: Mats Liljegren <mats.liljegren@enea.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This reverts commits
a0cdfcf9 (use pcap-config to guess compilation flags),
ef5b2363 (fix build with empty LIBPCAP_CFLAGS) and
60191b89 (fix build when pcap_sendpacket is unavailable).
These patches are creating more problems than solving the initial one
(which was a build error with too old pcap libraries).
Since old pcap libraries are not that common, just revert them.
Reported-by: Meir Tseitlin <mirots@gmail.com>
Reported-by: Mats Liljegren <mats.liljegren@enea.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Due to a merge conflict between commits 4c745617a1 and 9d5752d80,
rte_eth_pcap.c was not compiling with the following error:
rte_eth_pcap.c: In function 'rte_pmd_init_internals':
rte_eth_pcap.c:559:30: error: dereferencing pointer to incomplete type
rte_eth_pcap.c:560:15: error: dereferencing pointer to incomplete type
rte_eth_pcap.c:561:18: error: dereferencing pointer to incomplete type
rte_eth_pcap.c:603:47: error: dereferencing pointer to incomplete type
rte_eth_pcap.c: In function 'rte_pmd_pcap_init':
rte_eth_pcap.c:732:73: error: 'dict' undeclared (first use in this
function)
rte_eth_pcap.c:732:73: note: each undeclared identifier is reported
only once for each function it appears in
This commit replaces "struct args_dict" by "struct rte_kvargs" to fix
the compilation issue.
By the way, it also removes the declaration of these functions from
the header file as no other file in DPDK references one of them. It
avoids to include <rte_kvargs.h> in rte_eth_pcap.h.
Reported-by: Meir Tseitlin <mirots@gmail.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Applications can test versions, for compatibility, this way:
#if RTE_VERSION >= RTE_VERSION_NUM(1,2,3,4)
RTE_VERSION was already defined for use with rte_config.
It is moved in rte_version.h and updated to current version number.
Note that the first tag having this helper is 1.2.3r2.
Releases r0 have not this patch.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The entries for the configuration of the reception and of the transmission
of pause frames are inverted in the mode conversion array.
Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
Some features are not available if LIBRTE_CMDLINE is disabled:
- interactive mode
- ethernet address parsing
Note: ethernet address parsing could be rewritten without cmdline dependency.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Some features are not available if LIBRTE_CMDLINE is disabled:
- interactive commands
- cmdline tests
Remove also cmdline_parse includes which are not needed.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
ether_addr_equal() was added in Linux 3.5. compare_ether_addr() was
deleted in 3.14. Start using ether_addr_equal() and provide an own
implementation for older kernels.
This fixes the compilation with Linux 3.14-rc1.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The netdev_features_t typedef appeared in Linux 3.3, but checking the kernel
version isn't enough with some distributions (such as Debian Wheezy) that
backported it into 3.2, causing a compilation failure due to redefinition.
Since the presence of a typedef can't be tested at compile time, this commit
adds type kni_netdev_features_t, which, depending on the kernel version,
translates either to u32 or netdev_features_t.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
No need to keep residues of a fix which is replaced by another one.
This reverts commit 5a6d9897f9
(residual fix about resetting big Tx queues).
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Use command line parameters to get the name of the interface.
This name is converted into if_index, which is provided as
device info.
Signed-off-by: Mats Liljegren <mats.liljegren@enea.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Before libpcap 1.0.0, pcap_sendpacket was not available on linux targets (unless
backported).
When using such a library, we won't be able to send packet on the wire, yet we
can still dump packets into a pcap file.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
For backwards compatibility, pcap.h includes pcap/pcap.h.
Hence, to be compatible with older pcap libraries, we must include pcap.h.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
In rte.sdkbuild.mk with CONFIG_RTE_LIBRTE_PMD_PCAP=y,
we error-exit if LIBPCAP_CFLAGS is empty.
On some distros (e.g., Centos 6.4), it is normal for "pcap-config --cflags"
to output only a newline, because pcap header files reside in /usr/include/.
Solution is to remove the line that checks whether LIBPCAP_CFLAGS is empty.
Signed-off-by: Robert Sanford <rsanford@prolexic.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Use pcap-config to populate CFLAGS and LDFLAGS.
LIBPCAP_CFLAGS and LIBPCAP_LDFLAGS can be used to override this (useful when
cross-compiling).
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This field is intended for pcap to describe the name of the interface
as known to Linux. It is an interface index, but can be translated into
an interface name using if_indextoname() function.
When using pcap, interrupt affinity becomes important, and this field
gives the application a chance to ensure that interrupt affinity is set
to the lcore handling the device.
Signed-off-by: Mats Liljegren <mats.liljegren@enea.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Some Poll-Mode Drivers (PMD) are not reconfigurable and,
thus, do not implement (rx|tx)_queue_release functions.
For these drivers, the functions rte_eth_dev_(rx|tx)_queue_config
must return an ENOTSUP error only when reconfiguring,
but not at initial configuration.
Move the FUNC_PTR_OR_ERR_RET check into the case of reconfiguration.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
Add into the `rte_eth_stats` data structure 4 (64-bit) counters
of XOFF/XON pause frames received and sent on a given port.
Update em, igb, and ixgbe drivers to return the value of the 4 XOFF/XON
counters through the `rte_eth_stats_get` function exported by the DPDK
API.
Display the value of the 4 XOFF/XON counters in the `testpmd` application.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
1) Make device RX and TX offload capabilities to be returned in the
rte_eth_dev_info data structure by the function rte_eth_dev_info_get
The following initial set of RX offload capabilities are defined:
- VLAN header stripping
- IPv4 header checksum check
- UDP checksum check
- TCP checksum check
- TCP large receive offload (LRO)
The following initial set of TX offload capabilities are defined:
- VLAN header insertion
- IPv4 header checksum computation
- UDP checksum computation
- TCP checksum computation
- SCTP checksum computation
- TCP segmentation offload (Transmit Segmentation Offload)
- UDP segmentation offload
2) Update the eth_dev_infos_get() function of the igb and ixgbe PMDs
to return the offload capabilities which are supported by the
device and that are effectively managed by the driver.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
When the user specifies --create-uio-dev in dpdk eal start options, the
DPDK will create the /dev/uioX instead of waiting that a program does it
(which is usually hotplug).
This option is useful in embedded environments where there is no hotplug
to do the work.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add a new function pci_get_uio_dev() that parses /sys/bus/pci/devices
to get the uio device associated with a PCI device. This patch just
moves some code that was in pci_uio_map_resource() in the new function
without any functional change.
Thanks to this change, the next commit will be easier to understand.
Moreover it improves readability: having smaller functions help to
understand what pci_uio_map_resource() does.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Intel 82546EB Gigabit ethernet controller is reported to be working
with copper.
Tested-by: Ognjen Joldzic <ognjen.joldzic@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Some devices need to be unbound in order to be used via the PMD
without kernel module.
Signed-off-by: Damien Millescamps <damien.millescamps@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Since DPDK 1.4, if RTE_EAL_UNBIND_PORTS is disabled, igb_uio mapping is
done for all devices (commit eee16c964c), breaking some non-Intel drivers.
But pci_uio_map_resource() should only be called for Intel devices
(using igb_uio kernel module).
The flag RTE_PCI_DRV_NEED_IGB_UIO is set for all those devices, even when
RTE_EAL_UNBIND_PORTS is disabled (fixes commit a22f5ce8fc).
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Damien Millescamps <damien.millescamps@6wind.com>
Since DPDK 1.4, bars mapping is checked and prevent from initializing
drivers which do not use igb_uio mapping (see commit eee16c964c).
There is no need to check for bars mapping, especially BAR0 is not required.
If bars mapping failed, then pci_uio_map_resource will fail and we won't reach
this check. So get rid of BAR0 check.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Damien Millescamps <damien.millescamps@6wind.com>
In --no-huge mode, mempool provides objects with their associated
header/trailer fitting in a standard page (usually 4KB).
This means all non-UIO driver should work correctly in this mode,
since UIO drivers allocate ring sizes that cannot fit in a page.
Extend rte_mempool_virt2phy to obtain the correct physical address when
elements of the pool are not on the same physically contiguous memory region.
Reason for this patch is to be able to run on a kernel < 2.6.37 without
the need to patch it, since all kernel below are either bugged or don't
have huge page support at all (< 2.6.28).
Signed-off-by: Damien Millescamps <damien.millescamps@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Allow external libraries and applications to know if hugepages
are enabled.
Signed-off-by: Damien Millescamps <damien.millescamps@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
When huge pages are disabled, memory is allocated for a single, undefined
CPU socket using malloc(), causing rte_memzone_reserve_aligned() to fail
most of the time.
This patch causes that memory to use SOCKET_ID_ANY instead of 0, and allow
it to be used in place of any socket ID specified by user.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Damien Millescamps <damien.millescamps@6wind.com>
Before this patch, rte_malloc(SOCKET_ID_ANY) was equivalent to
rte_malloc(this_socket). If the user specifies SOCKET_ID_ANY, it means that
memory can be allocated on any socket. So fix the behavior of rte_malloc() in
order to do that. The current CPU socket is still the default, but if it fails,
other sockets are tested.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Remove an error log in memzone_reserve_aligned_thread_unsafe().
It is up to the caller to log the error, and this is already done
in DPDK code (especially in network drivers).
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Get physical address of any rte_malloc allocated buffer using
function rte_malloc_virt2phy(addr).
The rte_memzone pointer is now stored in each allocated memory block
header to allow simple computation of physical address of a block
using the memzone it comes from.
The function rte_malloc_virt2phy has a dependency on rte_memory.h:
phys_addr_t must be defined.
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Some functions don't modify their parameter which should be marked as const.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Extract rte_mem_virt2phy() from get_physaddr().
rte_mem_virt2phy() permits to obtain the physical address of any
virtual address mapped to the current process calling this function.
Note that this function is very slow and shouldn't be called
after initialization to avoid a performance bottleneck.
The memory must be locked with mlock(). The function rte_mem_lock_page()
is a mlock() helper that lock the whole page.
A better name would be rte_mem_virt2phys but rte_mem_virt2phy is more
consistent with rte_mempool_virt2phy.
Signed-off-by: Damien Millescamps <damien.millescamps@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
According to Intel Developer's Manual:
"The RDTSC instruction is not a serializing instruction. It does not necessarily wait
until all previous instructions have been executed before reading the counter. Simi-
larly, subsequent instructions may begin execution before the read operation is
performed. If software requires RDTSC to be executed only after all previous instruc-
tions have completed locally, it can either use RDTSCP (if the processor supports that
instruction) or execute the sequence LFENCE;RDTSC."
So add a rte_rdtsc_precise function that do a memory barrier before rdtsc to
synchronize operations and ensure that the TSC read is done at the expected place.
Use r/w memory barrier instead of lfence to serialize both loads and stores.
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Reviewed-by: François-Frédéric Ozog <ff@ozog.com>
Reviewed-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
TSC frequency was guessed by reading CLOCK_MONOTONIC_RAW or sleeping 1 sec.
Now, read frequency from cpuinfo first.
Keep other methods as fallbacks.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
Read flags from /proc/cpuinfo and warn if constant_tsc or nonstop_tsc is
not found.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
