Describe how to use hardware checksum API.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The tx mbuf flags are now ordered from the lowest value to the
the highest. Add comments to explain where to add new flags.
By the way, move the PKT_TX_VXLAN_CKSUM at the right place.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
fdir field in rte_mbuf is extended to support flex bytes reported when fdir match.
8 flex bytes can be reported in maximum.
The reported flex bytes are part of flexible payload.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This field is added for librte_distributor. User of librte_distributor
is advocated to set value of mbuf->hash.usr before calling
rte_distributor_process. The value of usr is the tag which stands as
identifier of flow.
Signed-off-by: Qinglai Xiao <jigsaw@gmail.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Implement the configuration API of VXLAN destination UDP port,
and add new Rx offload flags for supporting VXLAN packet offload.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
Replace the "reserved2" field with the "packet_type" field
and add the "inner_l2_l3_len" field in the rte_mbuf structure.
The "packet_type" field is used to indicate ordinary packet format and also
tunneling packet format such as IP in IP, IP in GRE, MAC in GRE and MAC in UDP.
The "inner_l2_len" and the "inner_l3_len" fields are added
in the second cache line, they use 2 bytes for TX offloading of tunnels.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add in a doxygen comment for the ctrl mbuf flag definition.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Update the format of the RX flags to match that of the TX flags. In
general the flags are now specified as "1ULL << X", with a few
exceptions.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch takes the existing TX flags defined for the mbuf and shifts
each uniquely defined one left so that additional RX flags can be
defined without having RX and TX flags mixed together. Under the new
scheme, RX flags start at bit 0 and work left, TX flags start at bit 55
and work right, and bits 56-63 are reserved for generic mbuf use, not
for offloads.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move the vlan_tci field up by two bytes in the mbuf data structure. This
has two effects:
* Ensures the the ixgbe vector driver places the vlan tag in the correct
place in the mbuf.
* Allows a second vlan tag field, if one is added in the future, to be
placed after the existing vlan field, rather than before.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
While some applications may store metadata about packets in the packet
mbuf headroom, this is not a workable solution for packet metadata which
is either:
* larger than the headroom (or headroom is needed for adding pkt headers)
* needs to be shared or copied among packets
To support these use cases in applications, we reserve a general
"userdata" pointer field inside the second cache-line of the mbuf. This
is better than having the application store the pointer to the external
metadata in the packet headroom, as it saves an additional cache-line
from being used.
Apart from storing metadata, this field also provides a general 8-byte
scratch space inside the mbuf for any other application uses that are
applicable.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The receive functions for packets do not modify the next pointer so
the next pointer should always be cleared on mbuf free, just in case.
The slow-path TX needs to clear it, and the standard mbuf free function
also needs to clear it. Fast path TX does not handle chained mbufs so
is unaffected
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The l2_len and l3_len fields are used for TX offloads and so should be
put on the second cache line, along with the other fields only used on
TX.
The l2 and l3 lengths can be accessed as a single uint16_t for
performance, as well as individually.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This change splits the mbuf in two to move the pool and next pointers to
the second cache line. This frees up 16 bytes in first cache line.
The reason for this change is that we believe that there is no possible
way that we can ever fit all the fields we need to fit into a 64-byte
mbuf, and so we need to start looking at a 128-byte mbuf instead. Examples
of new fields that need to fit in, include -
* 32-bits more for filter information for support for the new filters in
the i40e driver (and possibly other future drivers)
* an additional 2-4 bytes for storing info on a second vlan tag to allow
drivers to support double Vlan/QinQ
* 4-bytes for storing a sequence number to enable out of order packet
processing and subsequent packet reordering
as well as potentially a number of other fields or splitting out fields
that are superimposed over each other right now, e.g. for the qos scheduler.
We also want to allow space for use by other non-Intel NIC drivers that may
be open-sourced to dpdk.org in the future too, where they support fields
and offloads that currently supported hardware doesn't.
If we accept the fact of a 2-cache-line mbuf, then the issue becomes
how to rework things so that we spread our fields over the two
cache lines while causing the lowest slow-down possible. The general
approach that we are looking to take is to focus the first cache
line on fields that are updated on RX , so that receive only deals
with one cache line. The second cache line can be used for application
data and information that will only be used on the TX leg. This would
allow us to work on the first cache line in RX as now, and have the
second cache line being prefetched in the background so that it is
available when necessary. Hardware prefetches should help us out
here. We also may move rarely used, or slow-path RX fields e.g. such
as those for chained mbufs with jumbo frames, to the second
cache line, depending upon the performance impact and bytes savings
achieved.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add markers or "labels" at given points inside the mbuf which can be
used instead of individual fields to identify the start of logical
sections inside the mbuf.
The use of typedefs and dummy fields was chosen over using unions
because of a couple reasons:
* unions cause an extra level of indentation (more likely two levels as
a union containing a struct for multiple fields would be needed). This
makes the lines longer than they need to be and increases the need for
wrapping. [This was the main reason]
* with markers, you can apply multiple markers at the same point if
wanted.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The metadata macros are only used by libs and apps using the rte_port
packet framework library, so move them to a header file there.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Removed the explicit zero-sized metadata definition at the end of the
mbuf data structure. Updated the metadata macros to take account of this
change so that all existing code which uses those macros still works.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
* Ensure comments line up correctly
* Simplify the #ifdefs around the refcnt fields to make them clearer
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Since the flags field is now 64-bits, we can allow one bit to be used to
indicate a control i.e. non-packet mbuf. Dedicate the high bit (bit 63)
for this purpose and add in a utility macro to test if a given mbuf has
the bit set or not.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The offload flags field (ol_flags) was 16-bits and had no further room
for expansion. This patch increases the field size to 64-bits, using up
the remaining reserved space in the single-cache-line mbuf.
NOTE: none of the values for existing flags have been changed, i.e. no
new numbers have been explicitly reserved between existing flag
definitions.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
* Reorder the fields in the mbuf so that we have fields that are used
together side-by-side in the structure. This means that we have a
contiguous block of 8-bytes in the mbuf which are used to reset an mbuf
of descriptor rearm, and a block of 16-bytes of data (excluding flags)
which are set on RX from the received packet descriptor.
* Use dummy fields as appropriate to ensure alignment or to reserve gaps
for later field additions.
* Place most items which are not used by fast-path RX separately at the end
of the structure so they can later be moved to a separate cache line.
[The l2/l3 length fields are not moved at this stage as doing so will
cause overflow to the next cache line].
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The mbuf structure already contains a pointer to the beginning of the
buffer (m->buf_addr). It is not needed to use 8 bytes again to store
another pointer to the beginning of the data.
Using a 16 bits unsigned integer is enough as we know that a mbuf is
never longer than 64KB. We gain 6 bytes in the structure thanks to
this modification.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
* Updated to apply to latest on mainline.
* Disabled vector PMD in config as it relies heavily on the mbuf layout
This will be re-enabled in a subsequent commit once vPMD has been
reworked to take account of mbuf changes.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The vlan_macip structure combined a vlan tag id with l2 and l3 headers
lengths for tracking offloads. However, this structure was only used as
a unit by the e1000 and ixgbe drivers, not generally.
This patch removes the structure from the mbuf header and places the
fields into the mbuf structure directly at the required point, without
any net effect on the structure layout. This allows us to treat the vlan
tags and header length fields as separate for future mbuf changes. The
drivers which were written to use the combined structure still do so,
using a driver-local definition of it.
Reduce perf regression caused by splitting vlan_macip field. This is
done by providing a single uint16_t value to allow writing/clearing
the l2 and l3 lengths together. There is still a small perf hit to the
slow path TX due to the reads from vlan_tci and l2/l3 lengths being
separated. (<5% in my tests with testpmd with no extra params).
Unfortunately, this cannot be eliminated, without restoring the vlan
tags and l2/l3 lengths as a combined 32-bit field. This would prevent
us from ever looking to move those fields about and is an artificial tie
that applies only for performance in igb and ixgbe drivers. Therefore,
this patch keeps the vlan_tci field separate from the lengths as the
best solution going forward.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
In some cases we may want to tag a packet for a particular destination
or output port, so rename the "in_port" field in the mbuf to just "port"
so that it can be re-used for this purpose if an application needs it.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The rte_pktmbuf structure was initially included in the rte_mbuf
structure. This was needed when there was 2 types of mbuf (ctrl and
packet). As the control mbuf has been removed, we can merge the
rte_pktmbuf into the rte_mbuf structure.
Advantages of doing this:
- the access to mbuf fields is easier (ex: m->data instead of m->pkt.data)
- make the structure more consistent: for instance, there was no reason
to have the ol_flags field in rte_mbuf
- it will allow a deeper reorganization of the rte_mbuf structure in the
next commits, allowing to gain several bytes in it
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
[Bruce: updated for latest code and new example apps]
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The initial role of rte_ctrlmbuf is to carry generic messages (data
pointer + data length) but it's not used by the DPDK or it applications.
Keeping it implies:
- loosing 1 byte in the rte_mbuf structure
- having some dead code rte_mbuf.[ch]
This patch removes this feature. Thanks to it, it is now possible to
simplify the rte_mbuf structure by merging the rte_pktmbuf structure
in it. This is done in next commit.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
* Updated patch to HEAD.
* Modified patch to retain the old function names for ctrl mbufs as
macros. This helps with app compatibility, and allows the concept
of a control mbuf to be reintroduced via a single-bit flag in
a future change.
* Updated the packet framework ip_pipeline example application to
work following this change.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
It seems that RTE_MBUF_SCATTER_GATHER is not the proper name for the
feature it provides. "Scatter gather" means that data is stored using
several buffers. RTE_MBUF_REFCNT seems to be a better name for that
feature as it provides a reference counter for mbufs.
The macro RTE_MBUF_SCATTER_GATHER is poisoned to ensure this
modification is seen by drivers or applications using it.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
New packet flags of both RX and TX have been added to support i40e.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Heqing Zhu <heqing.zhu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Added zero-size field (offset in data structure) to specify the beginning
of packet meta-data in the packet buffer just after the mbuf.
The size of the packet meta-data is application specific and the packet
meta-data is managed by the application.
The packet meta-data should always be accessed through the provided macros.
This is used by the Packet Framework libraries (port, table, pipeline).
There is absolutely no performance impact due to this mbuf field, as it
does not take any space in the mbuf structure (zero-size field).
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
This commit removes trailing whitespace from lines in files. Almost all
files are affected, as the BSD license copyright header had trailing
whitespace on 4 lines in it [hence the number of files reporting 8 lines
changed in the diffstat].
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: remove spaces before tabs in libs]
[Thomas: remove more trailing spaces in non-C files]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The DPDK dump functions are useful for remote debugging of an
applications. But when application runs as a daemon, stdout
is typically routed to /dev/null.
Instead change all these functions to take a stdio FILE * handle
instead. An application can then use open_memstream() to capture
the output.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
[Thomas: fix quota_watermark example]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
rte_pktmbuf_attach copies the packet meta data but does not
copy the offload flags. This means that cloned packets lose
their offload settings such as vlan tag.
Signed-off-by: Stephen Hemminger <shemming@brocade.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Allow poll-mode drivers to maintain their own caches of mbufs, by allowing them
to check if it's ok to free an mbuf (to their local cache) without actually
freeing it back to the memory pool itself.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
