This patch adds new tunnel type for MPLS-in-GRE and MPLS-in-UDP.
MPLS-in-GRE protocol link:
https://tools.ietf.org/html/rfc4023
MPLS-in-UDP protocol link:
https://tools.ietf.org/html/rfc7510
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
VXLAN-GPE enables VXLAN for all protocols. Protocol link:
https://www.ietf.org/id/draft-ietf-nvo3-vxlan-gpe-05.txt
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This patch introduce new TX offload flags for device that supports
IP or UDP tunneled packet L3/L4 checksum and TSO offload.
It will be used for non-standard tunnels.
The support from the device is for inner and outer checksums on
IPV4/TCP/UDP and TSO for *any packet with the following format*:
<some headers> / [optional IPv4/IPv6] / [optional TCP/UDP] / <some
headers> / [optional inner IPv4/IPv6] / [optional TCP/UDP]
For example the following packets can use this feature:
1. eth / ipv4 / udp / VXLAN / ip / tcp
2. eth / ipv4 / GRE / MPLS / ipv4 / udp
Please note that specific tunnel headers that contain payload length,
sequence id or checksum will not be updated.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add few details to remind TSO flag, checksum flags and header lengths.
The doxygen syntax for MPLS-in-UDP is fixed.
Fixes: d95188551f ("mbuf: introduce new Tx offload flag for MPLS-in-UDP")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
When introducing rte_eth_tx_prepare(), the constraints on checksum
pre-filling for Tx offloads were relaxed because implemented in
the PMDs with rte_net_intel_cksum_flags_prepare() helper.
As a consequence, these old requirements are removed for:
- PKT_TX_OUTER_IP_CKSUM
- PKT_TX_IP_CKSUM
- PKT_TX_[L4]_CKSUM
- PKT_TX_TCP_SEG
Not sure SCTP offload is properly implemented though.
A reference to rte_eth_tx_prepare() is added in rte_eth_tx_burst() doc.
Fixes: 609dd68ef1 ("mbuf: enhance the API documentation of offload flags")
Fixes: 4fb7e803eb ("ethdev: add Tx preparation")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The rte_ctrlmbuf structure is not used by any example application
in dpdk. Remove it, as announced on the mailing list.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Gcc-8 discovers issue with platform_mempool_ops.
rte_mbuf_pool_ops.c:26:3: error: ‘strncpy’ output truncated before
terminating nul copying as many bytes from a string as its length
[-Werror=stringop-truncation]
strncpy(mz->addr, ops_name, strlen(ops_name));
Since the ops_name is already checked for size, using strncpy
here is unnecessary; just use strcpy.
Fixes: a3acc3144a ("mbuf: add pool ops selection functions")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The existing rte_eal_mbuf_default mempool ops can return the compile time
default ops name if the user has not provided command line inputs for
mempool ops name. It will break the logic of best mempool ops as it will
never return platform hw mempool ops.
This patch introduces a new API to just return the user mempool ops only.
Fixes: 8b0f7f4341 ("mbuf: maintain user and compile time mempool ops name")
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add non-EAL libraries to DPDK build. The compat lib is a special case,
along with the previously-added EAL, but all other libs can be build using
the same set of commands, where the individual meson.build files only need
to specify their dependencies, source files, header files and ABI versions.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Add checks during build to ensure that all symbols in the EXPERIMENTAL
version map section have __experimental tags on their definitions, and
enable the warnings needed to announce their use. Also add an
ALLOW_EXPERIMENTAL_APIS define to allow individual libraries and files
to declare the acceptability of experimental api usage
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Append the __rte_experimental tag to api calls appearing in the
EXPERIMENTAL section of their libraries version map
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Introduce a new helper for pktmbuf pool, which will allow
the application to optionally specify the mempool ops name
as well.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
This patch add support for various mempool ops config helper APIs.
1.User defined mempool ops
2.Platform detected HW mempool ops (active).
3.Best selection of mempool ops by looking into user defined,
platform registered and compile time configured.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
At present the userdefined mempool ops name overwrites
the default mempool ops name variable in internal_config.
This patch change the logic to maintain the value of
user defined only in the internal config.
The pktmbuf_create_pool is updated to reflect the same ie.
use user defined. If not present than use the default.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
For consistency with the Rx flags, the flags PKT_TX_VLAN_PKT and
PKT_TX_QINQ_PKT are respectively renamed as PKT_TX_VLAN and
PKT_TX_QINQ. The old defines are deprecated but will stay for some time
for compatibility.
Reported-by: Morten Brørup <mb@smartsharesystems.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Do not panic when calling rte_pktmbuf_free(NULL) with mbuf debug
enabled, it is a valid operation.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Reported-by: Keith Wiles <keith.wiles@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
It is unnecessary to cast from void * to struct rte_mbuf *,
the change can make code clearer.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
When RTE_MBUF_REFCNT_ATOMIC=n, the decrement of the mbuf reference
counter uses an atomic operation. This is not necessary and impacts
the performance (seen with TRex traffic generator).
We cannot replace rte_atomic16_add_return() by rte_mbuf_refcnt_update()
because it would add an additional check.
Solves this by introducing __rte_mbuf_refcnt_update(), which
updates the reference counter without doing anything else.
Fixes: 8f094a9ac5 ("mbuf: set mbuf fields while in pool")
Cc: stable@dpdk.org
Suggested-by: Hanoch Haim <hhaim@cisco.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Many exported headers rely on definitions found in rte_config.h without
including it, as shown by the following command:
grep -L '^#include <rte_config.h>' -- \
$(grep -Rl \
$(sed -n '/^#define \([^ ]\+\).*$/{s//\1/;H;};${x;s/\n//;s/\n/\\|/g;p;}' \
build/include/rte_config.h) \
-- build/include/)
We cannot assume external applications will include rte_config.h on their
own, neither directly nor through a -include parameter like DPDK does
internally.
This not only causes obvious compilation failures that can be reproduced
with check-includes.sh such as:
[...]/rte_memory.h:88:43: error: ‘RTE_CACHE_LINE_SIZE’ was not declared in
this scope
#define __rte_cache_aligned __rte_aligned(RTE_CACHE_LINE_SIZE)
^
It also results in less visible issues, for instance rte_hash_crc.h relying
on RTE_ARCH_X86_64's presence to provide dedicated inline functions.
This patch partially reverts the commit below and adds missing include
lines to the remaining files.
Fixes: f1a7a5c5f4 ("remove include of generated config header")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
In virtio, UDP Fragmentation Offload (UFO) includes two parts: host UFO
and guest UFO. Guest UFO means the frontend can receive large UDP
packets, and host UFO means the backend can receive large UDP packets.
This patch supports host UFO and guest UFO for vhost-user.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Update rte_mbuf_sanity_check() to check sanity of data_len and pkt_len
fields. For segmented packets it is supposed that head's pkt_len field
should be the sum of all segments data_len values.
Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
There is no reason to have local variable m2.
Fixes: af75078fec ("first public release")
Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Update types of variables to correspond to nb_segs type change from
uint8_t to uint16_t.
Fixes: 97cb466d65 ("mbuf: use 2 bytes for port and nb segments")
Cc: stable@dpdk.org
Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The following inline functions and macros have been renamed to be
consistent with the IOVA wording:
rte_mbuf_data_dma_addr -> rte_mbuf_data_iova
rte_mbuf_data_dma_addr_default -> rte_mbuf_data_iova_default
rte_pktmbuf_mtophys -> rte_pktmbuf_iova
rte_pktmbuf_mtophys_offset -> rte_pktmbuf_iova_offset
The deprecated functions and macros are kept to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Rename buf_physaddr to buf_iova.
Keep the deprecated name in an anonymous union to avoid breaking
the API.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The function rte_mempool_virt2phy() is renamed to rte_mempool_virt2iova().
The new function has one less parameter because it is unused.
The deprecated function is kept as an alias to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The memzone header is often included without good reason.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated for a while.
As explained in [1], these flags were kept to let the applications and
PMDs move to the new flag. There is also a need to support Rx vlan
offload without vlan strip (at least for the ixgbe driver).
This patch renames the old flags for this feature, knowing that some
PMDs were using PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT to indicate that
the vlan tci has been saved in the mbuf structure.
It is likely that some PMDs do not set the proper flags when doing vlan
offload, and it would be worth making a pass on all of them.
Link: [1] http://dpdk.org/ml/archives/dev/2017-June/067712.html
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add security crypto flags and update mbuf fields to support
IPsec crypto offload for transmitted packets, and to indicate
crypto result for received packets.
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The list of libraries in LDLIBS was generated from the DEPDIRS-xyz
variable. This is valid when the subdirectory name match the library
name, but it's not always the case, especially for PMDs.
The patches removes this feature and explicitly adds the proper
libraries in LDLIBS.
Some DEPDIRS-xyz variables become useless, remove them.
Reported-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
DPDK has support for both sw and hw mempool and
currently user is limited to use ring_mp_mc pool.
In case user want to use other pool handle,
need to update config RTE_MEMPOOL_OPS_DEFAULT, then
build and run with desired pool handle.
Introducing eal option to override default pool handle.
Now user can override the RTE_MEMPOOL_OPS_DEFAULT by passing
pool handle to eal `--mbuf-pool-ops-name=""`.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
In order to support more than 256 virtual ports, the field "port"
in rte_mbuf has been increased to 16 bits. The initialization/reset
value of the field "port" should be changed from 0xff to 0xffff
accordingly.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
When calling rte_pktmbuf_alloc_bulk, if there are
not enough objects in the mempool, it returns
a negative value, which should be reflected
in the Doxygen comments.
Fixes: 9ec201f5d6 ("mbuf: provide bulk allocation")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
IANA assigns a destination port of 4789 for the VXLAN in the Service
Name and Transport Protocol Port Number Registry. This is mentioned in
RFC 7348.
Fixes: f295a00a2b ("mbuf: add definitions of unified packet types")
Cc: stable@dpdk.org
Signed-off-by: Cian Ferriter <cian.ferriter@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Some PMDs need to know the tunnel type in order to handle advance TX
features. This patch adds a new TX offload flag for MPLS-in-UDP packets.
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
rte_pktmbuf_headroom() and rte_pktmbuf_tailroom() should be usable
with any segment, not only with headered ones, so is_header should be 0
when we call for sanity check inside them.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
There is no need for initializing the complete
packet buffer with zero as the packet data area will be
overwritten by the NIC Rx HW anyway.
The testpmd configures the packet mempool
with around 180k buffers with
2176B size. In existing scheme, the init routine
needs to memset around ~370MB vs the proposed scheme
requires only around ~22MB on 128B cache aligned system.
Useful in running DPDK in HW simulators/emulators,
where millions of cycles have an impact on boot time.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Different drivers use internal macros like force_inline for compiler
always inline feature.
Standardizing it through __rte_always_inline macro.
Verified the change by comparing the output binary file.
No difference found in the output binary file with this change.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The debug assertions when allocating a raw mbuf are not correct since
commit 8f094a9ac5 ("mbuf: set mbuf fields while in pool"),
which triggers a panic when using this function in debug mode
Change the expected number of segments to 1 instead of 0, and
factorize these sanity checks.
Fixes: 8f094a9ac5 ("mbuf: set mbuf fields while in pool")
Signed-off-by: Gregory Etelson <gregory@weka.io>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
With GCC 7 we need to explicitly document when we are falling through from
one switch case to another.
Fixes: af75078fec ("first public release")
Fixes: 8bae1da2af ("hash: fallback to software CRC32 implementation")
Fixes: 9ec201f5d6 ("mbuf: provide bulk allocation")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This commit addresses the following errors:
In file included from /tmp/check-includes.sh.681.c:1:0:
build/include/rte_mbuf_ptype.h:587:35: error: unknown type name 'uint32_t'
[...]
build/include/rte_mbuf_ptype.h:662:51: error: unknown type name 'size_t'
[...]
Fixes: 288541c8ff ("mbuf: add functions to dump packet type")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
On i686 builds, the uin64_t type is 64-bits in size but is aligned to
32-bits only. This causes mbuf fields for rearm_data to not be 16-byte
aligned on 32-bit builds, which causes errors with some vector PMDs which
expect the rearm data to be aligned as on 64-bit.
Given that we cannot use the extra space in the data structures anyway, as
it's already used on 64-bit builds, we can just force alignment of the
physical address in the mbuf to 8-bytes in all cases. This has no effect on
64-bit systems, but fixes the updated PMDs on 32-bit.
Fixes: f4356d7ca1 ("net/i40e: eliminate mbuf write on rearm")
Fixes: f160666a10 ("net/ixgbe: eliminate mbuf write on rearm")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The reorganization of the mbuf structure induces an ABI breakage.
Bump the library version, and update the documentation accordingly.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Move this field in the second cache line, since no driver use it
in Rx path. The freed space will be used by a timestamp in next
commit.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Change the size of m->port and m->nb_segs to 16 bits. It is now possible
to reference a port identifier larger than 256 and have a mbuf chain
larger than 256 segments.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
To avoid multiple stores on fast path, Ethernet drivers
aggregate the writes to data_off, refcnt, nb_segs and port
to an uint64_t data and write the data in one shot
with uint64_t* at &mbuf->rearm_data address.
Some of the non-IA platforms have store operation overhead
if the store address is not naturally aligned.This patch
fixes the performance issue on those targets.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Set the value of m->refcnt to 1, m->nb_segs to 1 and m->next
to NULL when the mbuf is stored inside the mempool (unused).
This is done in rte_pktmbuf_prefree_seg(), before freeing or
recycling a mbuf.
Before this patch, the value of m->refcnt was expected to be 0
while in pool.
The objectives are:
- to avoid drivers to set m->next to NULL in the early Rx path, since
this field is in the second 64B of the mbuf and its access could
trigger a cache miss
- rationalize the behavior of raw_alloc/raw_free: one is now the
symmetric of the other, and refcnt is never changed in these functions.
To optimize the freeing of the segments, we try try to only update
m->refcnt, m->next, and m->nb_segs when it's required (idea from
Konstantin Ananyev <konstantin.ananyev@intel.com>).
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Rename __rte_mbuf_raw_free() as rte_mbuf_raw_free() and make
it public. The old function is kept for compat but is marked as
deprecated.
The next commit changes the behavior of rte_mbuf_raw_free() to
make it more consistent with rte_mbuf_raw_alloc().
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Document the function and make it public, since it is used at several
places in the drivers. The old one is marked as deprecated.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Before this patch, the management of dependencies between directories
had several issues:
- the generation of .depdirs, done at configuration is slow: it can take
more than one minute on some slow targets (usually ~10s on a standard
PC without -j).
- for instance, it is possible to express a dependency like:
- app/foo depends on lib/librte_foo
- and lib/librte_foo depends on app/bar
But this won't work because the directories are traversed with a
depth-first algorithm, so we have to choose between doing 'app' before
or after 'lib'.
- the script depdirs-rule.sh is too complex.
- we cannot use "make -d" for debug, because the output of make is used for
the generation of .depdirs.
This patch moves the DEPDIRS-* variables in the upper Makefile, making
the dependencies much easier to calculate. A DEPDIRS variable is still
used to process library dependencies in LDLIBS.
After this commit, "make config" is almost immediate.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Robin Jarry <robin.jarry@6wind.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
When possible, replace the uses of rte_mempool_create() with
the helper provided in librte_mbuf: rte_pktmbuf_pool_create().
This is the preferred way to create a mbuf pool.
This also updates the documentation.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
mi->next will be assigned to NULL few lines later, trivial patch
Fixes: ea672a8b16 ("mbuf: remove the rte_pktmbuf structure")
Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This patch adds function rte_pktmbuf_linearize to let crypto PMD coalesce
chained mbuf before crypto operation and extend their capabilities to
support segmented mbufs when device cannot handle them natively.
Included unit tests for rte_pktmbuf_linearize functionality:
1) Creates banch of segmented mbufs with different size and number of
segments.
2) Fills noncontigouos mbuf with sequential values.
3) Uses rte_pktmbuf_linearize to coalesce segmented buffer into one
contiguous.
4) Verifies data in linearized buffer.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add a new Tx flag in mbuf, that can be set by applications to
enable the MACsec offload for a packet to be transmitted.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Added API for `rte_eth_tx_prepare`
uint16_t rte_eth_tx_prepare(uint8_t port_id, uint16_t queue_id,
struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
Added fields to the `struct rte_eth_desc_lim`:
uint16_t nb_seg_max;
/**< Max number of segments per whole packet. */
uint16_t nb_mtu_seg_max;
/**< Max number of segments per one MTU */
These fields can be used to create valid packets according to the
following rules:
* For non-TSO packet, a single transmit packet may span up to
"nb_mtu_seg_max" buffers.
* For TSO packet the total number of data descriptors is "nb_seg_max",
and each segment within the TSO may span up to "nb_mtu_seg_max".
Added functions:
int
rte_validate_tx_offload(struct rte_mbuf *m)
to validate general requirements for tx offload set in mbuf of packet
such a flag completness. In current implementation this function is
called optionaly when RTE_LIBRTE_ETHDEV_DEBUG is enabled.
int rte_net_intel_cksum_prepare(struct rte_mbuf *m)
to prepare pseudo header checksum for TSO and non-TSO tcp/udp packets
before hardware tx checksum offload.
- for non-TSO tcp/udp packets full pseudo-header checksum is
counted and set.
- for TSO the IP payload length is not included.
int
rte_net_intel_cksum_flags_prepare(struct rte_mbuf *m, uint64_t ol_flags)
this function uses same logic as rte_net_intel_cksum_prepare, but
allows application to choose which offloads should be taken into
account, if full preparation is not required.
PERFORMANCE TESTS
-----------------
This feature was tested with modified csum engine from test-pmd.
The packet checksum preparation was moved from application to Tx
preparation step placed before burst.
We may expect some overhead costs caused by:
1) using additional callback before burst,
2) rescanning burst,
3) additional condition checking (packet validation),
4) worse optimization (e.g. packet data access, etc.)
We tested it using ixgbe Tx preparation implementation with some parts
disabled to have comparable information about the impact of different
parts of implementation.
IMPACT:
1) For unimplemented Tx preparation callback the performance impact is
negligible,
2) For packet condition check without checksum modifications (nb_segs,
available offloads, etc.) is 14626628/14252168 (~2.62% drop),
3) Full support in ixgbe driver (point 2 + packet checksum
initialization) is 14060924/13588094 (~3.48% drop)
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Fixes typos present in the documentation and code comments.
Signed-off-by: Alain Leon <xerebz@gmail.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Previous patch updated the functions without updating all the comments.
Fixes: 591a9d7985 ("add FILE argument to debug functions")
Signed-off-by: Mauricio Vasquez B <mauricio.vasquez@polito.it>
Acked-by: John McNamara <john.mcnamara@intel.com>
When receiving coalesced packets in virtio, the original size of the
segments is provided. This is a useful information because it allows to
resegment with the same size.
Add a RX new flag in mbuf, that can be set when packets are coalesced by
a hardware or virtual driver when the m->tso_segsz field is valid and is
set to the segment size of original packets.
This flag is used in next commits in the virtio pmd.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Following discussions in [1] and [2], introduce a new bit to
describe the Rx checksum status in mbuf.
Before this patch, only one flag was available:
PKT_RX_L4_CKSUM_BAD: L4 cksum of RX pkt. is not OK.
And same for L3:
PKT_RX_IP_CKSUM_BAD: IP cksum of RX pkt. is not OK.
This had 2 issues:
- it was not possible to differentiate "checksum good" from
"checksum unknown".
- it was not possible for a virtual driver to say "the checksum
in packet may be wrong, but data integrity is valid".
This patch tries to solve this issue by having 4 states (2 bits)
for the IP and L4 Rx checksums. New values are:
- PKT_RX_L4_CKSUM_UNKNOWN: no information about the RX L4 checksum
-> the application should verify the checksum by sw
- PKT_RX_L4_CKSUM_BAD: the L4 checksum in the packet is wrong
-> the application can drop the packet without additional check
- PKT_RX_L4_CKSUM_GOOD: the L4 checksum in the packet is valid
-> the application can accept the packet without verifying the
checksum by sw
- PKT_RX_L4_CKSUM_NONE: the L4 checksum is not correct in the packet
data, but the integrity of the L4 data is verified.
-> the application can process the packet but must not verify the
checksum by sw. It has to take care to recalculate the cksum
if the packet is transmitted (either by sw or using tx offload)
And same for L3 (replace L4 by IP in description above).
This commit tries to be compatible with existing applications that
only check the existing flag (CKSUM_BAD).
[1] http://dpdk.org/ml/archives/dev/2016-May/039920.html
[2] http://dpdk.org/ml/archives/dev/2016-June/040007.html
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The functions rte_get_rx_ol_flag_name() and rte_get_tx_ol_flag_name()
can dump one flag, or set of flag that are part of the same mask (ex:
PKT_TX_UDP_CKSUM, part of PKT_TX_L4_MASK). But they are not designed to
dump the list of flags contained in mbuf->ol_flags.
This commit introduce new functions to do that. Similarly to the packet
type dump functions, the goal is to factorize the code that could be
used in several applications and reduce the risk of desynchronization
between the flags and the dump functions.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
An IPv4 packet is considered as a fragment if:
- MF (more fragment) bit is set
- or Fragment_Offset field is non-zero
Update the API documentation of packet types to reflect this.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Dumping the packet type is useful for debug purposes. Instead
of having each application providing its function to do that,
introduce functions to do it.
It factorizes the code and reduces the risk of desynchronization between
the new packet types and the dump function.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Add support of Nvgre tunnels in rte_net_get_ptype(). At the same
time, as Nvgre transports Ethernet, we need to add the support for inner
Vlan, QinQ, and Mpls.
Signed-off-by: Jean Dao <jean.dao@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Add a new RTE_PTYPE_L2_ETHER_QINQ packet type, and its support in
rte_net_get_ptype().
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Add a new RTE_PTYPE_L2_ETHER_VLAN packet type, and its support in
rte_net_get_ptype().
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
The file rte_mbuf.h starts to be quite big, and next commits
will introduce more functions related to packet types. Let's
move them in a new file.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Introduce a new function to read the packet data from an mbuf chain. It
linearizes the data if required, and also ensures that the mbuf is large
enough.
This function is used in next commits that add a software parser to
retrieve the packet type.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
To support tunneling packet offload capabilities on Tx side, PMDs
(e.g., i40e) need to know what kind of tunneling type of this packet.
Instead of analyzing the packet itself, we depend on applications to
correctly set the tunneling type. These flags are defined inside
rte_mbuf.ol_flags.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Some application use rte_mbuf_raw_alloc() function to improve
performance by not resetting mbuf's fields to their default state.
This can be however problematic for mbuf consumers that need some
headroom, meaning that data_off field gets decremented after
allocation. When the mbuf is re-used afterwards, there might not
be enough room for the consumer to prepend anything, if the data_off
field is not reset to its default value.
This patch adds a new rte_pktmbuf_reset_headroom() function that
applications can call to reset the data_off field.
This patch also replaces current data_off affectations in the mbuf
lib with a call to this function.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
On error, the mempool object has to be freed, and rte_errno should be a
positive value.
Fixes: 152ca51790 ("mbuf: use default mempool handler from config")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Exported header files used by applications should allow the strictest
compiler flags. Language extensions used in many places must be explicitly
marked to avoid warnings and compilation failures.
Unnamed structs/unions are allowed since C11, however many compiler
versions do not use this mode by default.
This commit prevents the following errors:
error: ISO C99 doesn't support unnamed structs/unions
error: struct has no named members
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Exported header files used by applications should allow the strictest
compiler flags. Language extensions used in many places must be explicitly
marked or removed to avoid warnings and compilation failures.
This commit prevents the following errors:
error: type of bit-field `[...]' is a GCC extension
Note: the standard does not require implementations to issue a diagnostic
message with these, and such errors do not occur with recent GCC or clang
versions. However, GCC 4.7 is still common and using the extension keyword
is easier than checking compiler version.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Exported header files used by applications should allow the strictest
compiler flags. Language extensions used in many places must be explicitly
marked or removed to avoid warnings and compilation failures.
The extension keyword is used whenever the C99 syntax cannot do it.
This commit prevents the following errors:
error: ISO C forbids zero-size array `[...]'
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The function __rte_mbuf_raw_alloc was reserved for internal use and
has been deprecated in favor of the public function rte_mbuf_raw_alloc.
It can be safely removed now.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
In rte_pktmbuf_pool_create(), the rte_errno variable was not always
set on failure.
Fixes: 152ca51790 ("mbuf: use default mempool handler from config")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Following the discussions from:
http://dpdk.org/ml/archives/dev/2015-July/021721.htmlhttp://dpdk.org/ml/archives/dev/2016-April/038143.html
The value of these flags is 0, making them useless. Today, no example
application checks them on Rx, and only few drivers sets them and
silently give wrong packets to the application, which should not happen.
This patch removes the unused flags from rte_mbuf and their use in the
drivers. The i40e and fm10k are kept as they are today and should be
fixed to drop bad packets. The enic driver is managed by its maintainer
in another patch.
Fixes: c22265f6 ("mbuf: add new packet flags for i40e")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Do not add 0x when using %p in format strings to avoid dump messages
with double 0x0x, e.g.,
dump mbuf at 0x0x7fac7b17c800, phys=17b17c880, buf_len=2176
pkt_len=2064, ol_flags=0, nb_segs=1, in_port=255
segment at 0x0x7fac7b17c800, data=0x0x7fac7b17c8f0, data_len=2064
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
By default, the mempool ops used for mbuf allocations is a multi
producer and multi consumer ring. We could imagine a target (maybe some
network processors?) that provides an hardware-assisted pool
mechanism. In this case, the default configuration for this architecture
would contain a different value for RTE_MBUF_DEFAULT_MEMPOOL_OPS.
Signed-off-by: David Hunt <david.hunt@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The behavior of PKT_RX_VLAN_PKT was not very well defined, resulting in
PMDs not advertising the same flags in similar conditions.
Following discussion in [1], introduce 2 new flags PKT_RX_VLAN_STRIPPED
and PKT_RX_QINQ_STRIPPED that are better defined:
PKT_RX_VLAN_STRIPPED: a vlan has been stripped by the hardware and its
tci is saved in mbuf->vlan_tci. This can only happen if vlan stripping
is enabled in the RX configuration of the PMD.
For now, the old flag PKT_RX_VLAN_PKT is kept but marked as deprecated.
It should be removed from applications and PMDs in a future revision.
This patch also updates the drivers. For PKT_RX_VLAN_PKT:
- e1000, enic, i40e, mlx5, nfp, vmxnet3: done, PKT_RX_VLAN_PKT already
had the same meaning than PKT_RX_VLAN_STRIPPED, minor update is
required.
- fm10k: done, PKT_RX_VLAN_PKT already had the same meaning than
PKT_RX_VLAN_STRIPPED, and vlan stripping is always enabled on fm10k.
- ixgbe: modification done (vector and normal), the old flag was set
when a vlan was recognized, even if vlan stripping was disabled.
- the other drivers do not support vlan stripping.
For PKT_RX_QINQ_PKT, it was only supported on i40e, and the behavior was
already correct, so we can reuse the same bit value for
PKT_RX_QINQ_STRIPPED.
[1] http://dpdk.org/ml/archives/dev/2016-April/037837.html,
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Some architectures (ex: Power8) have a cache line size of 128 bytes,
so the drivers should not expect that prefetching the second part of
the mbuf with rte_prefetch0(&m->cacheline1) is valid.
This commit add helpers that can be used by drivers to prefetch the
rx or tx part of the mbuf, whatever the cache line size.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The rte_pktmbuf_detach() function should decrease refcnt on a direct
buffer as stated in doc/guides/prog_guide/mbuf_lib.rst:
"whenever the indirect buffer is detached, the reference counter on the
direct buffer is decremented."
Signed-off-by: Hiroyuki Mikita <h.mikita89@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Many drivers provide their own implementation of rte_mbuf_raw_alloc(),
duplicating the code. Introduce a new public function in rte_mbuf to
allocate a raw mbuf (uninitialized).
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
The macro RTE_VERIFY always checks a condition.
It is optimized with "unlikely" hint.
While this macro is well suited for test applications, it is preferred
in libraries and examples to enable such check in debug mode.
That's why the macro RTE_ASSERT is introduced to call RTE_VERIFY only
if built with debug logs enabled.
A lot of assert macros were duplicated and enabled with a specific flag.
Removing these #ifdef allows to test these code branches more easily
and avoid dead code pitfalls.
The ENA_ASSERT is kept (in debug mode only) because it has more
parameters to log.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Some flags were poisoned after having been removed from EAL and mbuf
in releases 1.8 (b10eef348d, 62814bc2e9) and 2.0 (4769bc5a27).
After several releases, they have probably disappeared from all
applications going to upgrade to DPDK 16.07.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
X550 will do VxLAN & NVGRE RX checksum off-load automatically.
This patch exposes the result of the checksum off-load.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
As cryptodev library does not depend on mbuf_offload library
any longer, this patch removes it.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Macros RTE_MBUF_DATA_DMA_ADDR and RTE_MBUF_DATA_DMA_ADDR_DEFAULT
are defined in each PMD driver file. Convert macros to inline
functions and move them to common lib/librte_mbuf/rte_mbuf.h file.
PMD drivers include rte_mbuf.h file directly/indirectly hence no
additioanl header file inclusion is necessary.
Signed-off-by: Ravi Kerur <rkerur@gmail.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
rte_pktmbuf_alloc_bulk allocates a bulk of packet mbufs.
There is related thread about this bulk API.
http://dpdk.org/dev/patchwork/patch/4718/
Thanks to Konstantin's loop unrolling.
Attached the wiki page about duff's device. It explains the performance
optimization through loop unwinding, and also the most dramatic use of
case label fall-through.
https://en.wikipedia.org/wiki/Duff%27s_device
In this implementation, while() loop is used because we could not assume
count is strictly positive. Using while() loop saves one line of check.
Signed-off-by: Gerald Rogers <gerald.rogers@intel.com>
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
No need to split mbuf structure to two cache lines for 128-byte cache
line size targets as it can fit on a single 128-byte cache line.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This library add support for adding a chain of offload operations to a
mbuf. It contains the definition of the rte_mbuf_offload structure as
well as helper functions for attaching offloads to mbufs and a mempool
management functions.
This initial implementation supports attaching multiple offload
operations to a single mbuf, but only a single offload operation of a
specific type can be attach to that mbuf.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Increase the number of possible subports per port to allow up to 16 bits.
It is still possible that this will require excessive RAM.
Although mbuf structure is changed, it is ABI compatiable since it
just expands existing sched part of structure to overlap pre-existing hole
in the hash element of structure.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Chaining/segmenting mbufs can be useful in many places, so make it
global.
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: Johan Faltstrom <johan.faltstrom@netinsight.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The extended unified packet type is now part of the standard ABI.
As mbuf struct is changed, the mbuf library version is incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
When DPDK is being compiled in C++ project using g++ then
'invalid conversion from' error appears. Added explicit
typecast on function return to get rid of the error.
Fixes: 7755baae83 ("mbuf: silence warning on pointer arithmetic")
Signed-off-by: Sergey Balabanov <balabanovsv@ecotelecom.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
It looks better to have a data buffer address that is aligned to
8 bytes. This is the case when there is no mbuf private area, but
if there is one, the alignment depends on the size of this area
that is located between the mbuf structure and the data buffer.
Indeed, some drivers expects to have the buffer address aligned
to an even address, and moreover an unaligned buffer may impact
the performance when accessing to network headers.
Add a check in rte_pktmbuf_pool_create() to verify the alignment
constraint before creating the mempool. For applications that use
the alternative way (direct call to rte_mempool_create), also
add an assertion in rte_pktmbuf_init().
By the way, also add the MBUF log type.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
A packet is tunnelled if the tunnel type is identified or if it has
an inner part.
Fix also some typos in RTE_PTYPE_INNER_L3_MASK and IP comments.
Fixes: f295a00a2b ("mbuf: add definitions of unified packet types")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The comment for TX offload flags stated that those flags started at bit
55 and then were added to the right of that, leaving 8 bits reserved for
generic mbuf (i.e. non-offload) use. This comment may not have been
clear as 5 of the 8 flags which were reserved have now been used for TX
offloads.
This patch:
* updates the description so that it now reflects reality that
only three flags are available for generic mbuf use
* reserved the final generic flag so that it can't be taken over for TX
offload in future
* clarifies the comment for TX flags to indicate that they should be
counting downwards not upwards.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
As unified packet types are used instead, those old bit masks and
the relevant macros for packet type indication need to be removed.
To avoid breaking ABI compatibility, all the changes would be
enabled by RTE_NEXT_ABI, which is disabled by default.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
As there are only 6 bit flags in ol_flags for indicating packet
types, which is not enough to describe all the possible packet
types hardware can recognize. For example, i40e hardware can
recognize more than 150 packet types. Unified packet type is
composed of L2 type, L3 type, L4 type, tunnel type, inner L2 type,
inner L3 type and inner L4 type fields, and can be stored in
'struct rte_mbuf' of 32 bits field 'packet_type'.
To avoid breaking ABI compatibility, all the changes would be
enabled by RTE_NEXT_ABI.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
In order to unify the packet type, the field of 'packet_type' in
'struct rte_mbuf' needs to be extended from 16 to 32 bits.
Accordingly, some fields in 'struct rte_mbuf' are re-organized to support
this change for Vector PMD.
As 'struct rte_kni_mbuf' for KNI should be right mapped to
'struct rte_mbuf', it should be modified accordingly.
In ixgbe PMD driver, corresponding changes are added for the mbuf changes,
especially the bit masks of packet type for 'ol_flags' are replaced by
unified packet type. In addition, more packet types (UDP, TCP and SCTP)
are supported in vectorized ixgbe PMD.
To avoid breaking ABI compatibility, all the changes would be enabled by
RTE_NEXT_ABI.
Note that around 2% performance drop (64B) was observed of doing 4 ports
(1 port per 82599 card) IO forwarding on the same SNB core.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add mbuf field to store the IEEE1588 RX register index and other flags.
The size of the structure is not changed (still 2 cache lines).
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Use the reserved 16 bits in rte_mbuf structure for the outer vlan,
also add QinQ offloading flags for both RX and TX sides.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
The new version nodes inherit from the previous ones which
already include a default catch-all line for not exported symbols.
Reported-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
There are a number of instances in the code where rte_pktmbuf_mtod()
is used to get the mbuf data pointer, only to add an offset before
casting the result to some other header type. This patch adds a new
rte_pktmbuf_mtod_offset() macro to eliminate these awful double cast
situations.
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Translating from an mbuf element to the mbuf pointer does not break alignment
constraints. However, the compiler is unaware of this fact and complains on
-Wcast-align. This patch modifies the code to use RTE_PTR_SUB(), thereby
silencing the compiler by casting through (void *).
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
In __rte_pktmbuf_prefree_seg(), there was an optimization to avoid using
a costly atomic operation when updating the mbuf reference counter if
its value is 1. Indeed, it means that we are the only owner of the mbuf,
and therefore nobody can change it at the same time.
We can generalize this optimization directly in rte_mbuf_refcnt_update()
so the other callers of this function, like rte_pktmbuf_attach(), can
also take advantage of this optimization.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Latest mbuf changes (priv_size addition and related fixes)
exposed small problem with testpmd and few other sample apps:
when mbuf size is exaclty 2KB or less, that causes
ixgbe PMD to select scattered RX even for configs with 'normal'
max packet length (max_rx_pkt_len == ETHER_MAX_LEN).
To overcome that problem and unify the code, new macro was created
to represent recommended minimal buffer length for mbuf.
When appropriate, samples are updated to use that macro.
Fixes: dfb03bbe2b ("app/testpmd: use standard functions to initialize
mbufs and mbuf pool")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Remove one limitation of rte_pktmbuf_attach(): "mbuf we're attaching to
must be direct".
Now, when we attach to an indirect mbuf:
- copy the all relevant fields (addr, len, offload, ...) as before
- get the pointer to the mbuf that embeds the data buffer (direct mbuf),
and increase the reference counter of this one.
When detaching the mbuf, we can retrieve this direct mbuf as the pointer
is determined from the buffer address.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add a new priv_size field in mbuf structure that should
be initialized at mbuf pool creation. This field contains the
size of the application private data in mbufs.
Introduce new static inline functions rte_mbuf_from_indirect()
and rte_mbuf_to_baddr() to replace the existing macros, which
take the private size in account when attaching and detaching
mbufs.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Zoltan Kiss <zoltan.kiss@linaro.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add a new wrapper to rte_mempool_create() to simplify the creation
of a packet mbuf pool.
This wrapper can be used if there is no specific mempool flags, and
no specific mbuf or pool constructor function, which is most of the
use cases.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Allow the user to use the default rte_pktmbuf_init() function even
if the mbuf private size is not 0.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This code retrieving the pool private area is duplicated in many
places, we can use of function for it.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Deduct the mbuf data room size from mempool->elt_size and priv_size,
instead of using an hardcoded value that is not related to the real
buffer size.
To use rte_pktmbuf_pool_init(), the user can either:
- give a NULL parameter to rte_pktmbuf_pool_init(): in this case, the
private size is assumed to be 0, and the room size is
mp->elt_size - sizeof(struct rte_mbuf).
- give the rte_pktmbuf_pool_private filled with appropriate
data_room_size and priv_size values.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
CONFIG_RTE_MBUF_SCATTER_GATHER was renamed into CONFIG_RTE_MBUF_REFCNT
by commit 62814bc2e9 and removed by commit 4769bc5a27.
Some traces remain because of delayed patches.
It can also be removed from doxygen config.
It is now poisoned in rte_mbuf.h to warn any misuse.
Fixes: d0dff9ba44 ("doc: sample application user guide")
Fixes: fc1f2750a3 ("doc: programmers guide")
Fixes: 4769bc5a27 ("mbuf: remove build option to disable refcnt")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
The logic used in the condition check before freeing an mbuf is
sometimes confusing, so explain it in a proper comment.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Fix a couple of doxygen comments in mbuf structure:
- seqn had no doxygen syntax.
- usr was not generating proper link to function.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch removes all references to RTE_MBUF_REFCNT, setting the refcnt
field in the mbuf struct permanently.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Currently for mbufs with refcnt, we cannot free mbufs with external memory
buffers (ie. vhost zero copy), as they are recognized as indirect
attached mbufs and therefore we free the direct mbuf it points to,
resulting in an error in the case of external memory buffers.
We solve the issue by introducing the IND_ATTACHED_MBUF flag, which indicates
that the mbuf is an indirect attached mbuf pointing to another mbuf.
When we free an mbuf, we only free the direct mbuf if the flag is set.
Freeing an mbuf with external buffer is the same as freeing a non attached mbuf.
The flag is set during attach and clear on detach.
So in the case of vhost zero copy where we have mbufs with external
buffers, by default we just free the mbuf and it is up to the user to deal with
the external buffer.
This patch would allow the removal of the RTE_MBUF_REFCNT config option,
setting refcnt for all mbufs permanently.
The patch also modifies the vhost example as it was using the
RTE_MBUF_INDIRECT macro to detect if it was an mbuf with external buffer.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This library provides reordering capability for out of order mbufs based
on a sequence number in the mbuf structure.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Richardson Bruce <bruce.richardson@intel.com>
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Since previous commit, the flag PKT_TX_UDP_TUNNEL_PKT is not used by any PMD,
remove it from mbuf API and from csumonly (testpmd). In csumonly, the
PKT_TX_OUTER_IP_CKSUM flag is already set for vxlan checksum, providing
enough information to the underlying driver.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
The alias PKT_TX_IPV4_CSUM is only used in one place of i40e driver.
Remove it and only keep the legacy flag PKT_TX_IP_CSUM.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
To differentiate libraries that break ABI, we add a library version number
suffix to the library, which must be incremented when a given libraries ABI is
broken. This patch enforces that addition, sets the initial abi soname
extension to 1 for each library and creates a symlink to the base SONAME so that
the test applications will link properly.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Add linker version script files to each DPDK library to put a stake in the
ground from which we can start cleaning up API's
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Include rte_memory.h for lib files that use __rte_cache_aligned
attribute.
Consider the following code:
struct per_core_foo {
...
} __rte_cache_aligned;
struct global_foo {
struct per_core_foo foo[RTE_MAX_CORE];
};
If __rte_cache_aligned is not defined (rte_memory.h is not included),
the code compiles but the structure is not aligned... it defines the
structure and creates a global variable called __rte_cache_aligned.
And this can lead to really bad things if this code is in a .h that
is included by files that may or may not include rte_memory.h
Signed-off-by: Jia Yu <jyu@vmware.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The template mbuf_initializer is hard coded with a buflen which
might have been set differently by the application at the time of
mbuf pool creation.
- move buf_len fields out of rearm_data marker.
- make ixgbe_recv_pkts_vec() not touch buf_len field at all
(as all other RX functions behave).
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Jean-Mickael Guerin <jean-mickael.guerin@6wind.com>
Replace the inner_l2_len and the inner_l3_len field with the
outer_l2_len and outer_l3_len field, and rework csum forward engine
and i40e PMD due to these changes.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Replace PKT_TX_VXLAN_CKSUM with PKT_TX_UDP_TUNNEL_PKT in order to indicate
a packet is an UDP tunneling packet, and introduce 3 TX offload flags for
outer IP TX checksum, which are PKT_TX_OUTER_IP_CKSUM, PKT_TX_OUTER_IPV4
and PKT_TX_OUTER_IPV6 respectively.
Rework csum forward engine and i40e PMD due to these changes.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The reason of redefining the PKT_TX_IPV4 and the PKT_TX_IPV6 is listed below,
It will avoid to send a packet with a bad info:
- we receive a Ether/IP6/IP4/L4/data packet
- the driver sets PKT_RX_IPV6_HDR
- the stack decapsulates IP6
- the stack sends the packet, it has the PKT_TX_IPV6 flag but it's an IPv4 packet.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Implement TSO (TCP segmentation offload) in ixgbe driver. The driver is
now able to use PKT_TX_TCP_SEG mbuf flag and mbuf hardware offload infos
(l2_len, l3_len, l4_len, tso_segsz) to configure the hardware support of
TCP segmentation.
In ixgbe, when doing TSO, the IP length must not be included in the TCP
pseudo header checksum. A new function ixgbe_fix_tcp_phdr_cksum() is
used to fix the pseudo header checksum of the packet before giving it to
the hardware.
In the patch, the tx_desc_cksum_flags_to_olinfo() and
tx_desc_ol_flags_to_cmdtype() functions have been reworked to make them
clearer. This should not impact performance as gcc (version 4.8 in my
case) is smart enough to convert the tests into a code that does not
contain any branch instruction.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Some of the NICs supported by DPDK have a possibility to accelerate TCP
traffic by using segmentation offload. The application prepares a packet
with valid TCP header with size up to 64K and deleguates the
segmentation to the NIC.
Implement the generic part of TCP segmentation offload in rte_mbuf. It
introduces 2 new fields in rte_mbuf: l4_len (length of L4 header in bytes)
and tso_segsz (MSS of packets).
To delegate the TCP segmentation to the hardware, the user has to:
- set the PKT_TX_TCP_SEG flag in mbuf->ol_flags (this flag implies
PKT_TX_TCP_CKSUM)
- set the flag PKT_TX_IPV4 or PKT_TX_IPV6
- set PKT_TX_IP_CKSUM if it's IPv4, and set the IP checksum to 0 in
the packet
- fill the mbuf offload information: l2_len, l3_len, l4_len, tso_segsz
- calculate the pseudo header checksum without taking ip_len in account,
and set it in the TCP header, for instance by using
rte_ipv4_phdr_cksum(ip_hdr, ol_flags)
The API is inspired from ixgbe hardware (the next commit adds the
support for ixgbe), but it seems generic enough to be used for other
hw/drivers in the future.
This commit also reworks the way l2_len and l3_len are used in igb
and ixgbe drivers as the l2_l3_len is not available anymore in mbuf.
Signed-off-by: Mirek Walukiewicz <miroslaw.walukiewicz@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Introduce new functions to calculate checksums. These new functions
are derivated from the ones provided csumonly.c but slightly reworked.
There is still some room for future optimization of these functions
(maybe SSE/AVX, ...).
This API will be modified in tbe next commits by the introduction of
TSO that requires a different pseudo header checksum to be set in the
packet.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
In test-pmd (rxonly.c), the code is able to dump the list of ol_flags.
The issue is that the list of flags in the application has to be
synchronized with the flags defined in rte_mbuf.h.
This patch introduces 2 new functions rte_get_rx_ol_flag_name()
and rte_get_tx_ol_flag_name() that returns the name of a flag from
its mask. It also fixes rxonly.c to use this new functions and to
display the proper flags.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
This definition is specific to Intel PMD drivers and its definition
"indicate what bits required for building TX context" shows that it
should not be in the generic rte_mbuf.h but in the PMD driver.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
